arXiv subjects

Karen N. Heinselman

Publications and source records attributed to Karen N. Heinselman.

8 recordsLinked to original sources

arXiv2026

Toward Tunable Magnetic Dirac Semimetals: Mn Doping of Cd$_3$As$_2$

Magnetic impurities provide a route toward increasing functionality in electronic materials, often enabling new device concepts and architectures. In the case of topological semimetals, dilute magnetic doping presents a particularly attractive approach for inducing a Dirac to Weyl phase change via time reversal symmetry breaking. However, efforts to realize changes in the electronic structure have been limited by challenges in incorporating magnetic impurities into crystals with sufficiently high electron mobilities to detect them via transport or spectroscopic techniques. Here, we demonstrate incorporation of Mn into Cd$_3$As$_2$ Dirac semimetal thin films grown by molecular beam epitaxy (MBE). Using As-rich growth conditions and [001] oriented thin films, Mn compositions of >10% are achieved. Films contain uniform distributions of Mn with no evidence of secondary phases and exhibit electron mobilities greater than 10,000-30,000 cm$^2$/Vs up to 5% Mn. An evolution in the magnetization behavior along with the emergence of a second quantum oscillation frequency at low Mn concentrations provide preliminary evidence of Mn-induced changes in the electronic structure that are consistent with a Weyl phase. This work demonstrates the potential of magnetically doping topological semimetal thin films and a pathway for synthesizing them.

cond-mat.mtrl-sci↗

arXiv2023

Bulk and film synthesis pathways to ternary magnesium tungsten nitrides

Bulk solid state synthesis of nitride materials usually leads to thermodynamically stable, cation-ordered crystal structures, whereas thin film synthesis tends to favor disordered, metastable phases. This dichotomy is inconvenient both for basic materials discovery, where non-equilibrium thin film synthesis methods can be useful to overcome reaction kinetic barriers, and for practical technology applications where stable ground state structures are sometimes required. Here, we explore the uncharted Mg-W-N chemical phase space, using rapid thermal annealing to reconcile the differences between thin film and bulk powder syntheses. Combinatorial co-sputtering synthesis from Mg and W targets in a N$_2$ environment yielded cation-disordered Mg-W-N phases in the rocksalt (0.1< Mg/(Mg+W) <0.9), and hexagonal boron nitride (0.7< Mg/(Mg+W) <0.9) structure types. In contrast, bulk synthesis produced a cation-ordered polymorph of MgWN$_2$ that consists of alternating layers of rocksalt-like [MgN$_6$] octahedra and nickeline-like [WN$_6$] trigonal prisms (denoted "rocksaline"). Thermodynamic calculations corroborate these observations, showing rocksaline MgWN$_2$ is stable while other polymorphs are metastable. We also show that rapid thermal annealing can convert disordered rocksalt films to this cation-ordered polymorph near the MgWN$_2$ stoichiometry. Electronic structure calculations suggest that this rocksalt-to-rocksaline structural transformation should also drive a metallic-to-semiconductor transformation. In addition to revealing three new phases (rocksalt MgWN$_2$ and Mg$_3$WN$_4$, hexagonal boron nitride Mg$_3$WN$_4$, and rocksaline MgWN$_2$), these findings highlight how rapid thermal annealing can control polymorphic transformations, adding a new strategy for exploration of thermodynamic stability in uncharted phase spaces.

cond-mat.mtrl-sci↗

arXiv2023

Thin film TaAs: developing a platform for Weyl semimetal devices

MX monopnictide compounds (M=Nb,Ta, X = As,P) are prototypical three-dimensional Weyl semimetals (WSMs) that have been shown in bulk single crystal form to have potential for a wide variety of novel devices due to topologically protected band structures and high mobilities. However, very little is known about thin film synthesis, which is essential to enable device applications. We synthesize TaAs(001) epilayers by molecular beam epitaxy on GaAs(001) and provide an experimental phase diagram illustrating conditions for single phase, single-crystal-like growth. We investigate the relationship between nanoscale defects and electronic structure, using angle-resolved photoemission spectroscopy, Kelvin probe microscopy and transmission electron microscopy. Our results provide a roadmap and platform for developing 3D WSMs for device applications.

cond-mat.mtrl-sci↗

arXiv2022

Combinatorial synthesis of cation-disordered manganese tin nitride MnSnN$_2$ thin films with magnetic and semiconducting properties

Magnetic semiconductors may soon improve the energy efficiency of computers, but materials exhibiting these dual properties remain underexplored. Here, we report the computational prediction and realization of a new magnetic and semiconducting material, MnSnN$_2$, via combinatorial sputtering of thin films. Grazing incidence wide angle X-ray scattering and laboratory X-ray diffraction studies show a wide composition tolerance for this wurtzite-like MnSnN$_2$, ranging from $20\% <$ Mn/(Mn+Sn) $< 65$\% with cation disorder across this composition space. Magnetic susceptibility measurements reveal a low-temperature transition ($T^{\mathrm{*}} \approx 10$ K) for MnSnN$_2$ and strong antiferromagnetic correlations, although the ordering below this transition may be complex. This finding contrasts with bulk MnSiN$_2$ and MnGeN$_2$, which exhibited antiferromagnetic ordering above 400 K in previous studies. Spectroscopic ellipsometry identifies an optical absorption onset of 1 eV for the experimentally-synthesized phase exhibiting cation disorder, consistent with the computationally-predicted 1.2 eV bandgap for the cation-ordered structure. Electronic conductivity measurements confirm the semiconducting nature of this new phase by showing increasing conductivity with increasing temperature. This work adds to the set of known semiconductors that are paramagnetic at room temperature and will help guide future work targeted at controlling the structure and properties of semiconducting materials that exhibit magnetic behavior.

cond-mat.mtrl-sci↗

arXiv2022

Gallium Oxide Heterojunction Diodes for Improved High-Temperature Performance

$β$-Ga${_2}$O${_3}$ based semiconductor devices are expected to have significantly improved high-power and high-temperature performance due to its ultra-wide bandgap of close to 5 eV. However, the high-temperature operation of these ultra-wide-bandgap devices is usually limited by the relatively low 1-2 eV built-in potential at the Schottky barrier with most high-work-function metals. Here, we report heterojunction p-NiO/n-$β$-Ga${_2}$O${_3}$ diodes fabrication and optimization for high-temperature device applications, demonstrating a current rectification ratio of more than 10${^6}$ at 410°C. The NiO heterojunction diode can achieve higher turn-on voltage and lower reverse leakage current compared to the Ni-based Schottky diode fabricated on the same single crystal $β$-Ga${_2}$O${_3}$ substrate, despite charge transport dominated by interfacial recombination. Electrical characterization and device modeling show that these advantages are due to a higher built-in potential and additional band offset. These results suggest that heterojunction p-n diodes based on $β$-Ga${_2}$O${_3}$ can significantly improve high-temperature electronic device and sensor performance.

eess.SY↗

arXiv2022

The role of disorder in the synthesis of metastable zinc zirconium nitrides

In materials science, it is often assumed that ground state crystal structures predicted by density functional theory are the easiest polymorphs to synthesize. Ternary nitride materials, with many possible metastable polymorphs, provide a rich materials space to study what influences thermodynamic stability and polymorph synthesizability. For example, ZnZrN2 is theoretically predicted at zero Kelvin to have an unusual layered "wurtsalt" ground state crystal structure with compelling optoelectronic properties, but it is unknown whether this structure can be realized experimentally under practical synthesis conditions. Here, we use combinatorial sputtering to synthesize hundreds of ZnxZr1-xNy thin film samples, and find metastable rocksalt-derived or boron-nitride-derived structures rather than the predicted wurtsalt structure. Using a statistical polymorph sampler approach, it is demonstrated that although rocksalt is the least stable polymorph at zero Kelvin, it becomes the most stable polymorph at high effective temperatures similar to those achieved using this sputter deposition method, and thus corroborates experimental results. Additional calculations show that this destabilization of the wurtsalt polymorph is due to configurational entropic and enthalpic effects, and that vibrational contributions are negligible. Specifically, rocksalt- and boron-nitride-derived structures become the most stable polymorphs in the presence of disorder because of higher tolerances to cation cross-substitution and off-stoichiometry than the wurtsalt structure. This understanding of the role of disorder tolerance in the synthesis of competing polymorphs can enable more accurate predictions of synthesizable crystal structures and their achievable material properties.

cond-mat.mtrl-sci↗

arXiv2020

Growth and Characterization of Homoepitaxial $β$-Ga$_2$O$_3$ Layers

$β$-Ga$_2$O$_3$ is a next-generation ultra wide bandgap semiconductor (E$_g$ = 4.8 eV to 4.9 eV) that can be homoepitaxially grown on commercial substrates, enabling next-generation power electronic devices among other important applications. Analyzing the quality of deposited homoepitaxial layers used in such devices is challenging, in part due to the large probing depth in traditional x-ray diffraction (XRD) and also due to the surface-sensitive nature of atomic force microscopy (AFM). Here, a combination of evanescent grazing-incidence skew asymmetric XRD and AFM are investigated as an approach to effectively characterize the quality of homoepitaxial $β$-Ga$_2$O$_3$ layers grown by molecular beam epitaxy at a variety of Ga/O flux ratios. Accounting for both structure and morphology, optimal films are achieved at a Ga/O ratio of $\sim$1.15, a conclusion that would not be possible to achieve by either XRD or AFM methods alone. Finally, fabricated Schottky barrier diodes with thicker homoepitaxial layers are characterized by $J-V$ and $C-V$ measurements, revealing an unintentional doping density of 4.3 $\times$ 10$^{16}$ cm$^{-3}$ - 2 $\times$ 10$^{17}$ cm$^{-3}$ in the epilayer. These results demonstrate the importance of complementary measurement methods for improving the quality of the $β$-Ga$_2$O$_3$ homoepitaxial layers used in power electronic and other devices.

physics.app-ph↗

arXiv2019

Thin film synthesis of semiconductors in the Mg-Sb-N materials system

Nitrides feature many interesting properties, such as a wide range of bandgaps suitable for optoelectronic devices including light-emitting diodes (LEDs), and piezoelectric response used in microelectromechanical systems (MEMS). Nitrides are also significantly underexplored compared to oxides and other chemistries, with many being thermochemically metastable, sparking interest from a basic science point of view. This paper reports on experimental and computational exploration of the Mg-Sb-N material system, featuring both metastable materials and interesting semiconducting properties. Using sputter deposition, we discovered a new Mg2SbN3 nitride with a wurtzite-derived crystal structure and synthesized the antimonide-nitride Mg3SbN with an antiperovskite crystal structure for the first time in thin film form. Theoretical calculations indicate that Mg2SbN3 is metastable and has properties relevant to LEDs and MEMS, whereas Mg3SbN has a large dielectric constant (28ε_0) and low hole effective masses (0.9m_0), of interest for photovoltaic solar cell absorbers. The experimental solar-matched 1.3 eV optical absorption onset of the Mg3SbN antiperovskite agrees with the theoretical prediction (1.3 eV direct, 1.1 eV indirect), and with the measurements of room-temperature near-bandgap photoluminescence. These results make an important contribution towards understanding semiconductor properties and chemical trends in the Mg-Sb-N materials system, paving the way to future practical applications of these novel materials.

cond-mat.mtrl-sci↗