arXiv subjects

Karl Smith

Publications and source records attributed to Karl Smith.

7 recordsLinked to original sources

arXiv2025

Detector Response Matrices, Effective Areas, and Flash-Effective Areas for Radiation Detectors

A Detector Response Matrix (DRM) is a discrete representation of an instrument's Detector Response Function (DRF), which quantifies how many discrete energy depositions occur in a detector volume for a given distribution of particles incident on the detector. For simple radiation detectors that can count such energy depositions (such as scintillators, Proportional Counter Tubes (PCTs), etc), we consider the ideal counting DRF, $\mathbf{G}_\varphi (E_\mathrm{in}, E_\mathrm{dep})$, which relates the detector's counting histogram (number of energy depositions within a given channel) to an incident particles characterization, $\varphi$ (e.g. incident flux, fluence, intensity). From the counting DRF we can derive the counting DRM, the effective area, and the flash effective area (which measures the total energy deposited in the detector from a large, instantaneous fluence).

physics.ins-det↗

arXiv2023

Imaging High Jitter, Very Fast Phenomena: A Remedy for Shutter Lag

Dielectric breakdown is an example of a natural phenomenon that occurs on very short time scales, making it incredibly difficult to capture optical images of the process. Event initiation jitter is one of the primary challenges, as even a microsecond of jitter time can cause the imaging attempt to fail. Initial attempts to capture images of dielectric breakdown with a gigahertz frame rate camera and an exploding bridge wire initiation were stymied by high initiation jitter. Subsequently, a novel optical delay line apparatus was developed in order to effectively circumvent the jitter and reliably image dielectric breakdown. The design and performance of the optical delay line apparatus are presented. The optical delay line increased the image capture success rate from 25% to 94% while also permitting enhanced temporal resolution and has applications for use in imaging other high-jitter, extremely fast phenomena.

physics.optics↗

arXiv2022

Designing a boron nitride polyethylene composite for shielding neutrons

Neutrons are encountered in many different fields, including condensed matter physics, space exploration, nuclear power, and healthcare. Neutrons interacting with a biological target produce secondary charged particles that are damaging to human health. The most effective way to shield neutrons is to slow them to thermal energies and then capture the thermalized neutrons. These factors lead us to consider potential materials solutions for neutron shields that maximize the protection of humans while minimizing the shield mass, and which adapt well to modern additive manufacturing techniques. Using hexagonal boron nitride (hBN) as a capture medium and high-density polyethylene (HDPE) as a thermalization medium, we aim to design the optimal internal structure of h$^{10}$BN/HDPE composites by minimizing the effective dose, which is a measure of the estimated radiation damage exposure for a human. Through Monte Carlo simulations in Geant4, we find that the optimal structure reduces the effective dose up to a factor of 72x over aluminum (Al) and 4x over HDPE; this is a significant improvement in shielding effectiveness that could dramatically reduce the radiation exposure of occupational workers.

physics.app-ph↗

arXiv2021

Particle detection and tracking with DNA

We present the first proof-of-concept simulations of detectors using biomaterials to detect particle interactions. The essential idea behind a "DNA detector" involves the attachment of a forest of precisely-sequenced single or double-stranded nucleic acids from a thin holding layer made of a high-density material. Incoming particles break a series of strands along a roughly co-linear chain of interaction sites and the severed segments then fall to a collection area. Since the sequences of base pairs in nucleic acid molecules can be precisely amplified and measured using polymerase chain reaction (PCR), the original spatial position of each broken strand inside the detector can be reconstructed with nm precision. Motivated by the potential use as a low-energy directional particle tracker, we perform the first Monte Carlo simulations of particle interactions inside a DNA detector. We compare the track topology as a function of incoming direction, energy, and particle type for a range of ionising particles. While particle identification and energy reconstruction might be challenging without a significant scale-up, the excellent potential angular and spatial resolution ($\lesssim 25^\circ$ axial resolution for a keV-scale particles and nm-scale track segments) are clear advantages of this concept. We conclude that a DNA detector could be a cost-effective, portable, and powerful new particle detection technology. We outline the outstanding experimental challenges, and suggest directions for future laboratory tests.

physics.ins-det↗

arXiv2015

Low energy neutron background in deep underground laboratories

The natural neutron background influences the maximum achievable sensitivity in most deep underground nuclear, astroparticle and double-beta decay physics experiments. Reliable neutron flux numbers are an important ingredient in the design of the shielding of new large-scale experiments as well as in the analysis of experimental data. Using a portable setup of He-3 counters we measured the thermal neutron flux at the Kimballton Underground Research Facility, the Soudan Underground Laboratory, on the 4100 ft and the 4850 ft levels of the Sanford Underground Research Facility, at the Waste Isolation Pilot Plant and at the Gran Sasso National Laboratory. Absolute neutron fluxes at these laboratories are presented.

physics.ins-det↗

arXiv2009

Managing Information for Sparsely Distributed Articles and Readers: The Virtual Journals of the Joint Institute for Nuclear Astrophysics (JINA)

The research area of nuclear astrophysics is characterized by a need for information published in tens of journals in several fields and an extremely dilute distribution of researchers. For these reasons it is difficult for researchers, especially students, to be adequately informed of the relevant published research. For example, the commonly employed journal club is inefficient for a group consisting of a professor and his two students. In an attempt to address this problem, we have developed a virtual journal (VJ), a process for collecting and distributing a weekly compendium of articles of interest to researchers in nuclear astrophysics. Subscribers are notified of each VJ issue using an email-list server or an RSS feed. The VJ data base is searchable by topics assigned by the editors, or by keywords. There are two related VJs: the Virtual Journal of Nuclear Astrophysics (JINA VJ), and the SEGUE Virtual Journal (SEGUE VJ). The JINA VJ also serves as a source of new experimental and theoretical information for the JINA REACLIB reaction rate database. References to review articles and popular level articles provide an introduction to the literature for students. The VJs and support information are available at http://groups.nscl.msu.edu/jina/journals

astro-ph.IM↗

arXiv2006

Sensitivity of Type I X-Ray Bursts to rp-Process Reaction Rates

First steps have been taken in a more comprehensive study of the dependence of observables in Type I X-ray bursts on uncertain (p,gamma) reaction rates along the rp-process path. We use the multizone hydrodynamics code KEPLER which implicitly couples a full nuclear reaction network of more than 1000 isotopes, as needed, to follow structure and evolution of the X-ray burst layer and its ashes. This allows us to incorporate the full rp-process network, including all relevant nuclear reactions, and individually study changes in the X-ray burst light curves when modifying selected key nuclear reaction rates. In this work we considered all possible proton captures to nuclei with 10 < Z < 28 and N <= Z. When varying individual reaction rates within a symmetric full width uncertainty of a factor of 10000, early results for some rates show changes in the burst light curve as large as 10 percent of peak luminosity. This is very large compared to the current sensitivity of X-ray observations. More precise reaction rates are therefore needed to test current X-ray burst models, particularly of the burst rise, with observational data and to constrain astrophysical parameters.

astro-ph↗