arXiv subjects

Karsten Reuter

Publications and source records attributed to Karsten Reuter.

At least 91 records · Page 5Linked to original sources

arXiv2012

Evaluation of endohedral doping of hydrogenated Si fullerenes as a route to magnetic Si building blocks

Density-functional theory based global geometry optimization is used to scrutinize the possibility of endohedral doping of hydrogenated Si fullerenes as a route to Si nanostructures with high magnetic moments. In contrast to previous suggestions, our unbiased sampling finds the smallest Si16H16 endohedral cage generally too small to encapsulate 3d metal dopant atoms. For the next larger fullerene-like cage though, we identify perfectly symmetric MSi20H20 (M = Co, Ti, V, Cr) cage structures as ground states. These structures conserve the high spin moment of the dopant atom and therewith underscore the potential of this Si nanoform for novel cluster-based materials with unique magnetic properties.

cond-mat.mtrl-sci↗

arXiv2012

When atomic-scale resolution is not enough: Spatial effects in in situ model catalyst studies

We investigate transport effects in in situ studies of defined model catalysts using a multi-scale modeling approach integrating first-principles kinetic Monte Carlo simulations into a fluid dynamical treatment. We specifically address two isothermal flow setups: i) a channel flow with the gas-stream approaching the single crystal from the side, as is representative for reactor scanning tunneling microscopy experiments; and ii) a stagnation flow with perpendicular impingement. Using the CO oxidation at RuO2 (110) as showcase we obtain substantial variations in the gas-phase pressures between the inlet and the catalyst surface. In the channel geometry the mass transfer limitations lead furthermore to pronounced lateral changes in surface composition across the catalyst surface. This prevents the aspired direct relation between activity and catalyst structure. For the stagnation flow the lateral variations are restricted to the edges of the catalyst. This allows to access the desired structure-activity relation using a simple model.

cond-mat.mtrl-sci↗

arXiv2012

Molecular-level understanding of the WGS and reverse WGS reactions on Rh through hierarchical multiscale approach

Hierarchically combining semi-empirical methods and first-principles calculations we gain a novel and noteworthy picture of the molecular-level mechanisms that govern the water-gas-shift (WGS) and reverse water-gas-shift (r-WGS) reactions on Rh catalysts. Central to this picture is that the WGS and r-WGS follow two different dominant reaction mechanisms: WGS proceeds according to a carboxyl (COOH) mechanism, whereas r-WGS proceeds according to a redox (CO2 {\to} CO + O) mechanism. The obtained results furthermore underscore the danger of common first-principles analyses that focus on a priori selected dominant paths. Not restricted to such bias, our herein proposed hierarchical approach thus constitutes a promising avenue to properly transport and incorporate the ab initio predictive-quality to a new level of system complexity.

cond-mat.mtrl-sci↗

arXiv2012

Resolution-of-identity approach to Hartree-Fock, hybrid density functionals, RPA, MP2, and \textit{GW} with numeric atom-centered orbital basis functions

Efficient implementations of electronic structure methods are essential for first-principles modeling of molecules and solids. We here present a particularly efficient common framework for methods beyond semilocal density-functional theory, including Hartree-Fock (HF), hybrid density functionals, random-phase approximation (RPA), second-order Møller-Plesset perturbation theory (MP2), and the $GW$ method. This computational framework allows us to use compact and accurate numeric atom-centered orbitals (popular in many implementations of semilocal density-functional theory) as basis functions. The essence of our framework is to employ the "resolution of identity (RI)" technique to facilitate the treatment of both the two-electron Coulomb repulsion integrals (required in all these approaches) as well as the linear density-response function (required for RPA and $GW$). This is possible because these quantities can be expressed in terms of products of single-particle basis functions, which can in turn be expanded in a set of auxiliary basis functions (ABFs). The construction of ABFs lies at the heart of the RI technique, and here we propose a simple prescription for constructing the ABFs which can be applied regardless of whether the underlying radial functions have a specific analytical shape (e.g., Gaussian) or are numerically tabulated. We demonstrate the accuracy of our RI implementation for Gaussian and NAO basis functions, as well as the convergence behavior of our NAO basis sets for the above-mentioned methods. Benchmark results are presented for the ionization energies of 50 selected atoms and molecules from the G2 ion test set as obtained with $GW$ and MP2 self-energy methods, and the G2-I atomization energies as well as the S22 molecular interaction energies as obtained with the RPA method.

physics.atm-clus↗

arXiv2012

Assessing computationally efficient isomerization dynamics: Delta-SCF density-functional theory study of azobenzene molecular switching

We present a detailed comparison of the S0, S1 (n -> π*) and S2 (π-> π*) potential energy surfaces (PESs) of the prototypical molecular switch azobenzene as obtained by Delta-self-consistent-field (Delta-SCF) Density-Functional Theory (DFT), time-dependent DFT (TD-DFT) and approximate Coupled Cluster Singles and Doubles (RI-CC2). All three methods unanimously agree in terms of the PES topologies, which are furthermore fully consistent with existing experimental data concerning the photo-isomerization mechanism. In particular, sum-method corrected Delta-SCF and TD-DFT yield very similar results for S1 and S2, when based on the same ground-state exchange-correlation (xc) functional. While these techniques yield the correct PES topology already on the level of semi-local xc functionals, reliable absolute excitation energies as compared to RI-CC2 or experiment require an xc treatment on the level of long-range corrected hybrids. Nevertheless, particularly the robustness of Delta-SCF with respect to state crossings as well as its numerical efficiency suggest this approach as a promising route to dynamical studies of larger azobenzene-containing systems.

physics.chem-ph↗

arXiv2012

Non-adiabatic effects during the dissociative adsorption of O2 at Ag(111)? A first-principles divide and conquer study

We study the gas-surface dynamics of O2 at Ag(111) with the particular objective to unravel whether electronic non-adiabatic effects are contributing to the experimentally established inertness of the surface with respect to oxygen uptake. We employ a first-principles divide and conquer approach based on an extensive density-functional theory mapping of the adiabatic potential energy surface (PES) along the six O2 molecular degrees of freedom. Neural networks are subsequently used to interpolate this grid data to a continuous representation. The low computational cost with which forces are available from this PES representation allows then for a sufficiently large number of molecular dynamics trajectories to quantitatively determine the very low initial dissociative sticking coefficient at this surface. Already these adiabatic calculations yield dissociation probabilities close to the scattered experimental data. Our analysis shows that this low reactivity is governed by large energy barriers in excess of 1.1 eV very close to the surface. Unfortunately, these adiabatic PES characteristics render the dissociative sticking a rather insensitive quantity with respect to a potential spin or charge non-adiabaticity in the O2-Ag(111) interaction. We correspondingly attribute the remaining deviations between the computed and measured dissociation probabilities primarily to unresolved experimental issues with respect to surface imperfections.

cond-mat.mtrl-sci↗

arXiv2011

Electron-hole pairs during the adsorption dynamics of O2 on Pd(100) - Exciting or not?

During the exothermic adsorption of molecules at solid surfaces dissipation of the released energy occurs via the excitation of electronic and phononic degrees of freedom. For metallic substrates the role of the nonadiabatic electronic excitation channel has been controversially discussed, as the absence of a band gap could favour an easy coupling to a manifold of electronhole pairs of arbitrarily low energies. We analyse this situation for the highly exothermic showcase system of molecular oxygen dissociating at Pd(100), using time-dependent perturbation theory applied to first-principles electronic-structure calculations. For a range of different trajectories of impinging O2 molecules we compute largely varying electron-hole pair spectra, which underlines the necessity to consider the high-dimensionality of the surface dynamical process when assessing the total energy loss into this dissipation channel. Despite the high Pd density of states at the Fermi level, the concomitant non-adiabatic energy losses nevertheless never exceed about 5% of the available chemisorption energy. While this supports an electronically adiabatic description of the predominant heat dissipation into the phononic system, we critically discuss the non-adiabatic excitations in the context of the O2 spin transition during the dissociation process.

cond-mat.mtrl-sci↗

arXiv2011

On the stability of "non-magic" endohedrally doped Si clusters: A first-principles sampling study of MSi16^+ (M =Ti,V,Cr)

Density-functional theory is used to study the geometric and electronic structure of cationic Si16^+ clusters with a Ti, V or Cr dopant atom. Through unbiased global geometry optimization based on the basin-hopping approach we confirm that a Frank- Kasper polyhedron with the metal atom at the center represents the ground-state isomer for all three systems. The endohedral cage geometry is thus stabilized even though only VSi16^+ achieves electronic shell closure within the prevalent spherical potential model. Our analysis of the electronic structure traces this diminished role of shell closure for the stabilization back to the adaptive capability of the metal- Si bonding, which is more the result of a complex hybridization than the orginally proposed mere formal charge transfer. The resulting flexibility of the metal-Si bond can help to stabilize also "non-magic" cage-dopant combinations, which suggests that a wider range of materials may eventually be cast into this useful geometry for cluster-assembled materials.

cond-mat.mtrl-sci↗

arXiv2010

Towards a first-principles chemical engineering: Transport limitations and bistability in in situ CO oxidation at RuO2(110)

We present a first-principles based multiscale modeling approach to heterogeneous catalysis that integrates first-principles kinetic Monte Carlo simulations of the surface reaction chemistry into a fluid dynamical treatment of the macro-scale flow structures in the reactor. The approach is applied to a stagnation flow field in front of a single-crystal model catalyst, using the CO oxidation at RuO2(110) as representative example. Our simulations show how heat and mass transfer effects can readily mask the intrinsic reactivity at gas-phase conditions typical for modern in situ experiments. For a range of gas-phase conditions we furthermore obtain multiple steady-states that arise solely from the coupling of gas-phase transport and surface kinetics. This additional complexity needs to be accounted for when aiming to use dedicated in situ experiments to establish an atomic-scale understanding of the function of heterogeneous catalysts at technologically relevant gas-phase conditions.

cond-mat.mtrl-sci↗

arXiv2010

Structural Metastability of Endohedral Silicon Fullerenes

Endohedrally doped Si20 fullerenes appear as appealing building blocks for nanoscale materials. We investigate their structural stability with an unbiased and systematic global geometry optimization method within density-functional theory. For a wide range of metal doping atoms, it was sufficient to explore the Born Oppenheimer surface for only a moderate number of local minima to find structures that clearly differ from the initial endohedral cages, but are considerably more favorable in terms of energy. Previously proposed structures are thus all metastable.

cond-mat.mes-hall↗

arXiv2010

Water adsorption and dissociation on SrTiO3(001) revisited: A density-functional theory study

We present a comprehensive density-functional theory study addressing the adsorption, dissociation and successive diffusion of water molecules on the two regular terminations of SrTiO3(001). Combining the obtained supercell-geometry converged energetics within a first-principles thermodynamics framework we are able to reproduce the experimentally observed hydroxilation of the SrO-termination already at lowest background humidity, whereas the TiO2-termination stays free of water molecules in the regime of low water partial pressures. This different behavior is traced back to the effortless formation of energetically very favorable hydroxyl-pairs on the prior termination. Contrary to the prevalent understanding our calculations indicate that at low coverages also the less water-affine TiO2-termination can readily decompose water, with the often described molecular state only stabilized towards higher coverages.

cond-mat.mtrl-sci↗

arXiv2010

Azobenzene versus 3,3',5,5'-tetra-tert-butyl-azobenzene (TBA) at Au(111): Characterizing the role of spacer groups

We present large-scale density-functional theory (DFT) calculations and temperature programmed desorption measurements to characterize the structural, energetic and vibrational properties of the functionalized molecular switch 3,3',5,5'-tetra-tert-butyl-azobenzene (TBA) adsorbed at Au(111). Particular emphasis is placed on exploring the accuracy of the semi-empirical dispersion correction approach to semi-local DFT (DFT-D) in accounting for the substantial van der Waals component in the surface chemical bond. In line with previous findings for benzene and pure azobenzene at coinage metal surfaces, DFT-D significantly overbinds the molecule, but seems to yield an accurate adsorption geometry as far as can be judged from the experimental data. Comparing the trans adsorption geometry of TBA and azobenzene at Au(111) reveals a remarkable insensitivity of the structural and vibrational properties of the -N=N- moiety. This questions the established view of the role of the bulky tert-butyl-spacer groups for the switching of TBA in terms of a mere geometric decoupling of the photochemically active diazo-bridge from the gold substrate.

cond-mat.mtrl-sci↗

arXiv2009

Signatures of nonadiabatic O2 dissociation at Al(111): First-principles fewest-switches study

Recently, spin selection rules have been invoked to explain the discrepancy between measured and calculated adsorption probabilities of molecular oxygen reacting with Al(111). In this work, we inspect the impact of nonadiabatic spin transitions on the dynamics of this system from first principles. For this purpose the motion on two distinct potential-energy surfaces associated to different spin configurations and possible transitions between them are inspected by means of the Fewest Switches algorithm. Within this framework we especially focus on the influence of such spin transitions on observables accessible to molecular beam experiments. On this basis we suggest experimental setups that can validate the occurrence of such transitions and discuss their feasibility.

cond-mat.mtrl-sci↗

arXiv2009

First-Principles Approach to Heat and Mass Transfer Effects in Model Catalyst Studies

We assess heat and mass transfer limitations in in situ studies of model catalysts with a first-principles based multiscale modeling approach that integrates a detailed description of the surface reaction chemistry and the macro-scale flow structures. Using the CO oxidation at RuO2(110) as a prototypical example we demonstrate that factors like a suppressed heat conduction at the backside of the thin single-crystal, and the build-up of a product boundary layer above the flat-faced surface play a significant role.

cond-mat.mtrl-sci↗

arXiv2009

Azobenzene at Coinage Metal Surfaces: The Role of Dispersive van der Waals Interactions

We use different semi-empirical dispersion correction schemes to assess the role of long-range van der Waals interactions in the adsorption of the prototypical molecular switch azobenzene (C6H5-N2-C6H5) at the coinage metal surfaces Cu(111), Ag(111) and Au(111). Compared to preceding density-functional theory results employing a semi-local exchange and correlation functional we obtain partly sizable changes of the computed adsorption geometry and energetics. The discomforting scatter in the results provided by the different schemes is largely attributed to the unknown form of the damping function in the semi-empirical correction expression. Using the congeneric problem of the adsorption of benzene as a vehicle to connection with experiment, we cautiously conclude that the account of dispersive interactions at the metal surfaces provided by the various schemes is in the right ballpark, with the more recent, general schemes likely to overbind.

cond-mat.mtrl-sci↗

arXiv2009

Experimental and theoretical study of oxygen adsorption structures on Ag(111)

The oxidized Ag(111) surface has been studied by a combination of experimental and theoretical methods, scanning tunneling microscopy (STM), x-ray photoelectron spectroscopy (XPS), and density functional theory (DFT). A large variety of different surface structures is found, depending on the detailed preparation conditions. The observed structures fall into four classes: (a) individually chemisorbed atomic oxygen atoms, (b) three different oxygen overlayer structures, including the well-known p(4 x 4) phase, formed from the same Ag$_6$ and Ag$_{10}$ building blocks, (c) a c(4 x 8) structure not previously observed, and (d) at higher oxygen coverages structures characterized by stripes along the high-symmetry directions of the Ag(111) substrate. Our analysis provides a detailed explanation of the atomic-scale geometry of the Ag$_6$/Ag$_{10}$ building block structures, and the c(4 x 8) and stripe structures are discussed in detail. The observation of many different and co-existing structures implies that the O/Ag(111) system is characterized by a significantly larger degree of complexity than previously anticipated, and this will impact our understanding of oxidation catalysis processes on Ag catalysts.

cond-mat.mtrl-sci↗

arXiv2009

Robustness of "cut and splice" genetic algorithms in the structural optimization of atomic clusters

We return to the geometry optimization problem of Lennard-Jones clusters to analyze the performance dependence of "cut and splice" genetic algorithms (GAs) on the employed population size. We generally find that admixing twinning mutation moves leads to an improved robustness of the algorithm efficiency with respect to this a priori unknown technical parameter. The resulting very stable performance of the corresponding mutation+mating GA implementation over a wide range of population sizes is an important feature when addressing unknown systems with computationally involved first-principles based GA sampling.

cond-mat.mtrl-sci↗

arXiv2009

Stabilizing a Molecular Switch at Solid Surfaces: A Density-Functional Theory Study of Azobenzene at Cu(111), Ag(111), and Au(111)

We present a density-functional theory trend study addressing the binding of the trans-cis conformational switch azobenzene (C6H5-N=N-C6H5) at three coinage metal surfaces. From the reported detailed energetic, geometric, and electronic structure data we conclude that the governing factor for the molecule-surface interaction is a competition between covalent bonding of the central azo (-N=N-) bridge on the one hand and the surface interaction of the two closed-shell phenyl (-C6H5) rings on the other. With respect to this factor the cis conformer exhibits a more favorable gas-phase geometric structure and is thus more stabilized at the studied surfaces. With the overall binding still rather weak the relative stability of the two isomers is thereby reduced at Ag(111) and Au(111). This is significantly different at Cu(111), where the cis bonding is strong enough to even reverse the gas-phase energetic order at the level of the employed semi-local electronic exchange and correlation (xc) functional. While this actual reversal may well be affected by the deficiencies due to the approximate xc treatment, we critically discuss that the rationalization of the general effect of the surface on the meta-stable molecular states is quite robust. This should equally hold for the presented analysis of recent tip-manipulation and photo-excitation isomerization experiments from the view point of the derived bonding mechanism.

cond-mat.mtrl-sci↗