arXiv subjects

Kartik Srinivasan

Publications and source records attributed to Kartik Srinivasan.

178 records · Page 10Linked to original sources

arXiv2006

Optical fiber taper coupling and high-resolution wavelength tuning of microdisk resonators at cryogenic temperatures

A system for studying microcavity resonators at cryogenic temperatures (~10 K) through evanescent coupling via optical fiber taper waveguides is reported, and efficient fiber coupling to AlGaAs microdisk cavities with embedded quantum dots is demonstrated. As an immediate application of this tool, we study high-resolution tuning of microdisk cavities through nitrogen gas adsorption, as first discussed by Mosor, et al. By proper regulation of the nitrogen gas flow and delivery of the gas to the sample surface, continuous tuning can be achieved with modest gas flows, and overall wavelength shifts as large as 4 nm are achieved.

physics.optics↗

arXiv2006

Integration of fiber coupled high-Q silicon nitride microdisks with atom chips

Micron scale silicon nitride (SiN_x) microdisk optical resonators are demonstrated with Q = 3.6 x 10^6 and an effective mode volume of 15 (λ/ n)^3 at near visible wavelengths. A hydrofluoric acid wet etch provides sensitive tuning of the microdisk resonances, and robust mounting of a fiber taper provides efficient fiber optic coupling to the microdisks while allowing unfettered optical access for laser cooling and trapping of atoms. Measurements indicate that cesium adsorption on the SiN_x surfaces significantly red-detunes the microdisk resonances. A technique for parallel integration of multiple (10) microdisks with a single fiber taper is also demonstrated.

quant-ph↗

arXiv2005

Cavity Q, mode volume, and lasing threshold in small diameter AlGaAs microdisks with embedded quantum dots

The quality factor (Q), mode volume (Veff), and room-temperature lasing threshold of microdisk cavities with embedded quantum dots (QDs) are investigated. Finite element method simulations of standing wave modes within the microdisk reveal that Veff can be as small as 2(lambda/n)^3 while maintaining radiation-limited Qs in excess of 10^5. Microdisks of diameter D=2 microns are fabricated in an AlGaAs material containing a single layer of InAs QDs with peak emission at lambda = 1317 nm. For devices with Veff ~2 (lambda/n)^3, Qs as high as 1.2 x 10^5 are measured passively in the 1.4 micron band, using an optical fiber taper waveguide. Optical pumping yields laser emission in the 1.3 micron band, with room temperature, continuous-wave thresholds as low as 1 microWatt of absorbed pump power. Out-coupling of the laser emission is also shown to be significantly enhanced through the use of optical fiber tapers, with laser differential efficiency as high as xi~16% and out-coupling efficiency in excess of 28%.

physics.optics↗

arXiv2005

Photoluminescence measurements of quantum-dot-containing semiconductor microdisk resonators using optical fiber taper waveguides

Fiber taper waveguides are used to improve the efficiency of room temperature photoluminescence measurements of AlGaAs microdisk resonant cavities with embedded self-assembled InAs quantum dots. As a near-field collection optic, the fiber taper improves the collection efficiency from microdisk lasers by a factor of ~ 15-100 times in comparison to conventional normal incidence free-space collection techniques. In addition, the fiber taper can serve as a efficient means for pumping these devices, and initial measurements employing fiber pumping and collection are presented. Implications of this work towards chip-based cavity quantum electrodynamics experiments are discussed.

physics.optics↗

arXiv2004

Optical loss and lasing characteristics of high-quality-factor AlGaAs microdisk resonators with embedded quantum dots

Optical characterization of AlGaAs microdisk resonant cavities with a quantum dot active region is presented. Direct passive measurement of the optical loss within AlGaAs microdisk resonant structures embedded with InAs/InGaAs dots-in-a-well (DWELL) is performed using an optical-fiber-based probing technique at a wavelength (lambda~1400 nm) that is red-detuned from the dot emission wavelength (lambda~1200 nm). Measurements in the 1400 nm wavelength band on microdisks of diameter D = 4.5 microns show that these structures support modes with cold-cavity quality factors as high as 360,000. DWELL-containing microdisks are then studied through optical pumping at room temperature. Pulsed lasing at lambda ~ 1200 nm is seen for cavities containing a single layer of InAs dots, with threshold values of ~ 17 microWatts, approaching the estimated material transparency level. Room-temperature continuous wave operation is also observed.

quant-ph↗

arXiv2004

Nonlinear absorption and dispersion in fiber-taper-coupled silicon photonic crystal microresonators

A technique is demonstrated which efficiently transfers light between a tapered standard single-mode optical fiber and a high-Q, ultra-small mode volume, silicon photonic crystal resonant cavity. Cavity mode quality factors of 47000 are measured, and a total fiber-to-cavity coupling efficiency of 44% is demonstrated. Using this efficient cavity input and output channel, the steady-state nonlinear absorption and dispersion of the photonic crystal cavity is studied. Optical bistability is observed for fiber input powers as low as 250 μW, corresponding to a dropped power of 100 μW and 3 fJ of stored cavity energy. A high-density effective free-carrier lifetime for these silicon photonic crystal resonators of 0.5 ns is also estimated from power dependent loss and dispersion measurements.

physics.optics↗

arXiv2004

Design of two-dimensional photonic crystal defect states for quantum cascade laser resonators

Current quantum cascade lasers based upon conduction band electron transitions are predominantly TM (electrical field normal to the epitaxial direction) polarized. Here we present a study of localized defect modes, with the requisite TM polarization, in connected square and hexagonal lattice two-dimensional (2D) photonic crystals for application as quantum cascade laser resonators. A simple group-theory based analysis is used to produce an approximate description of the resonant modes supported by defects situated at different high symmetry points within the host photonic lattice. The results of this analysis are compared with 2D finite-difference time-domain (FDTD) simulations, showing a close correspondence between the two analyses, and potential applications of the analysis in quantum cascade laser design are considered.

physics.optics↗

arXiv2004

An optical fiber-based probe for photonic crystal microcavities

We review a novel method for characterizing both the spectral and spatial properties of resonant cavities within two-dimensional photonic crystals (PCs). An optical fiber taper serves as an external waveguide probe whose micron-scale field is used to source and couple light from the cavity modes, which appear as resonant features in the taper's wavelength-dependent transmission spectrum when it is placed within the cavity's near field. Studying the linewidth and depth of these resonances as a function of the taper's position with respect to the resonator produces quantitative measurements of the quality factor Q and modal volume Veff of the resonant cavity modes. Polarization information about the cavity modes can be obtained by studying their depths of coupling when the cavity is probed along different axes by the taper. This fiber-based technique has been used to measure Q ~ 40,000 and Veff ~ 0.9 cubic wavelengths in a graded square lattice PC microcavity fabricated in silicon. The speed and versatility of this fiber-based probe is highlighted, and a discussion of its applicability to other wavelength-scale resonant elements is given.

physics.optics↗

arXiv2004

Rayleigh scattering, mode coupling, and optical loss in silicon microdisks

High refractive index contrast optical microdisk resonators fabricated from silicon-on-insulator wafers are studied using an external silica fiber taper waveguide as a wafer-scale optical probe. Measurements performed in the 1500 nm wavelength band show that these silicon microdisks can support whispering-gallery modes with quality factors as high as 5.2 x 10^5, limited by Rayleigh scattering from fabrication induced surface roughness. Microdisks with radii as small as 2.5 microns are studied, with measured quality factors as high as 4.7 x 10^5 for an optical mode volume of 5.3 cubic wavelengths in the material.

physics.optics↗

arXiv2004

Optical fiber coupling to planar photonic crystal microcavities

A technique is demonstrated which efficiently transfers light between a tapered standard single-mode optical fiber and a resonant mode of a high-Q photonic crystal cavity with mode volume less than a cubic wavelength in size. Cavity mode quality factors of 4.7 x 10^4 are measured, and a total fiber-to-cavity coupling efficiency of 44% is demonstrated.

physics.optics↗

arXiv2004

Feasibility of detecting single atoms using photonic bandgap cavities

We propose an atom-cavity chip that combines laser cooling and trapping of neutral atoms with magnetic microtraps and waveguides to deliver a cold atom to the mode of a fiber taper coupled photonic bandgap (PBG) cavity. The feasibility of this device for detecting single atoms is analyzed using both a semi-classical treatment and an unconditional master equation approach. Single-atom detection seems achievable in an initial experiment involving the non-deterministic delivery of weakly trapped atoms into the mode of the PBG cavity.

quant-ph↗

arXiv2003

Fabrication-tolerant high quality factor photonic crystal microcavities

A two-dimensional photonic crystal microcavity design supporting a wavelength-scale volume resonant mode with a calculated quality factor (Q) insensitive to deviations in the cavity geometry at the level of Q~2x10^4 is presented. The robustness of the cavity design is confirmed by optical fiber-based measurements of passive cavities fabricated in silicon. For microcavities operating in the lambda = 1500 nm wavelength band, quality factors between 1.3-4.0x10^4 are measured for significant variations in cavity geometry and for resonant mode normalized frequencies shifted by as much as 10% of the nominal value.

physics.optics↗

arXiv2003

Efficient input and output fiber coupling to a photonic crystal waveguide

The efficiency of evanescent coupling between a silica optical fiber taper and a silicon photonic crystal waveguide is studied. A high reflectivity mirror on the end of the photonic crystal waveguide is used to recollect, in the backwards propagating fiber mode, the optical power that is initially coupled into the photonic crystal waveguide. An outcoupled power in the backward propagating fiber mode of 88% of the input power is measured, corresponding to a lower bound on the coupler efficiency of 94%.

physics.optics↗

arXiv2003

Optical-fiber based measurement of an ultra-small volume high-Q photonic crystal microcavity

A two-dimensional photonic crystal semiconductor microcavity with a quality factor Q ~ 40,000 and a modal volume Veff ~ 0.9 cubic wavelengths is demonstrated. A micron-scale optical fiber taper is used as a means to probe both the spectral and spatial properties of the cavity modes, allowing not only measurement of modal loss, but also the ability to ascertain the in-plane localization of the cavity modes. This simultaneous demonstration of high-Q and ultra-small Veff in an optical microcavity is of potential interest in quantum optics, nonlinear optics, and optoelectronics. In particular, the measured Q and Veff values could enable strong coupling to both atomic and quantum dot systems in cavity quantum electrodynamics.

quant-ph↗

arXiv2003

Probing the dispersive and spatial properties of planar photonic crystal waveguide modes via highly efficient coupling from optical fiber tapers

The demonstration of an optical fiber based probe for efficiently exciting the waveguide modes of high-index contrast planar photonic crystal (PC) slabs is presented. Utilizing the dispersion of the PC, fiber taper waveguides formed from standard silica single-mode optical fibers are used to evanescently couple light into the guided modes of a patterned silicon membrane. A coupling efficiency of approximately 95% is obtained between the fiber taper and a PC waveguide mode suitably designed for integration with a previously studied ultra-small mode volume high-Q PC resonant cavity [1]. The micron-scale lateral extent and dispersion of the fiber taper is also used as a near-field spatial and spectral probe to study the profile and dispersion of PC waveguide modes. The mode selectivity of this wafer-scale probing technique, together with its high efficiency, suggests that it will be useful in future quantum and non-linear optics experiments employing planar PCs.

quant-ph↗

arXiv2003

Experimental demonstration of a high quality factor photonic crystal microcavity

Sub-threshold measurements of a photonic crystal (PC) microcavity laser operating at 1.3 microns show a linewidth of 0.10 nm, corresponding to a quality factor Q ~ 1.3x10^4. The PC microcavity mode is a donor-type mode in a graded square lattice of air holes, with a theoretical Q ~ 10^5 and mode volume Veff ~ 0.25 cubic half-wavelengths in air. Devices are fabricated in an InAsP/InGaAsP multi-quantum well membrane and are optically pumped at 830 nm. External peak pump power laser thresholds as low as 100 microWatts are also observed.

quant-ph↗