arXiv subjects

Katarina Cicak

Publications and source records attributed to Katarina Cicak.

14 recordsLinked to original sources

arXiv2025

Localized quasiparticles in a fluxonium with quasi-two-dimensional amorphous kinetic inductors

Disordered superconducting materials with high kinetic inductance are an important resource to generate nonlinearity in quantum circuits and create high-impedance environments. In thin films fabricated from these materials, the combination of disorder and the low effective dimensionality leads to increased order parameter fluctuations and enhanced kinetic inductance values. Among the challenges of harnessing these compounds in coherent devices are their proximity to the superconductor-insulator phase transition, the presence of broken Cooper pairs, and the two-level systems located in the disordered structure. In this work, we fabricate tungsten silicide wires from quasi-two-dimensional films with one spatial dimension smaller than the superconducting coherence length and embed them into microwave resonators and fluxonium qubits, where the kinetic inductance provides the inductive part of the circuits. We study the dependence of loss on the frequency, disorder, and geometry of the device, and find that the loss increases with the level of disorder and is dominated by the localized quasiparticles trapped in the spatial variations of the superconducting gap.

quant-ph↗

arXiv2024

Simple, High Saturation Power, Quantum-limited, RF SQUID Array-based Josephson Parametric Amplifiers

High-fidelity quantum non-demolition qubit measurement is critical to error correction and rapid qubit feedback in large-scale quantum computing. High-fidelity readout requires passing a short and strong pulse through the qubit's readout resonator, which is then processed by a sufficiently high bandwidth, high saturation power, and quantum-limited amplifier. We have developed a design pipeline that combines time-domain simulation of the un-truncated device Hamiltonian, fabrication constraints, and maximization of saturation power. We have realized an amplifier based on a modified NIST tri-layer Nb fabrication suite which utilizes an array of 25 radio frequency Superconducting QUantum Interference Devices (rf SQUIDs) embedded within a low-Q resonator powered by a high-power voltage pump delivered via a diplexer on the signal port. We show that, despite the intensity of the pump, the device is quantum-efficient and capable of high-fidelity measurement limited by state transitions in the transmon. We present experimental data demonstrating up to -91.2 dBm input saturation power with 20 dB gain, up to 28 MHz instantaneous bandwidth, and phase-preserving qubit measurements with 62% quantum efficiency.

quant-ph↗

arXiv2022

Contactless Excitation of Acoustic Resonance in Insulating Wafers

Contactless excitation and detection of high harmonic acoustic overtones in a thin insulator single crystal are described using radio frequency spectroscopy techniques. Single crystal [001] silicon wafer samples were investigated, one side covered with a Nb thin film, the common starting point for fabrication of quantum devices. The coupling between electromagnetic signals and mechanical oscillation is achieved from the Lorentz force generated by an external magnetic field. This method is suitable for any sample with a metallic surface or covered with a thin metal film. High resolution measurements of the temperature dependence of the sound velocity and elastic constants of silicon are reported and compared with known results.

physics.app-ph↗

arXiv2021

Direct observation of deterministic macroscopic entanglement

Quantum entanglement of mechanical systems emerges when distinct objects move with such a high degree of correlation that they can no longer be described separately. Although quantum mechanics presumably applies to objects of all sizes, directly observing entanglement becomes challenging as masses increase, requiring measurement and control with a vanishingly small error. Here, using pulsed electromechanics, we deterministically entangle two mechanical drumheads with masses of 70 pg. Through nearly quantum-limited measurements of the position and momentum quadratures of both drums, we perform quantum state tomography and thereby directly observe entanglement. Such entangled macroscopic systems are uniquely poised to serve in fundamental tests of quantum mechanics, enable sensing beyond the standard quantum limit, and function as long-lived nodes of future quantum networks.

quant-ph↗

arXiv2021

Trade off-Free Entanglement Stabilization in a Superconducting Qutrit-Qubit System

Quantum reservoir engineering is a powerful framework for autonomous quantum state preparation and error correction. However, traditional approaches to reservoir engineering are hindered by unavoidable coherent leakage out of the target state, which imposes an inherent trade off between achievable steady-state state fidelity and stabilization rate. In this work we demonstrate a protocol that achieves trade off-free Bell state stabilization in a qutrit-qubit system realized on a circuit-QED platform. We accomplish this by creating a purely dissipative channel for population transfer into the target state, mediated by strong parametric interactions coupling the second-excited state of a superconducting transmon and the engineered bath resonator. Our scheme achieves a state preparation fidelity of 84% with a stabilization time constant of 339 ns, leading to the lowest error-time product reported in solid-state quantum information platforms to date.

quant-ph↗

arXiv2021

Low-Temperature Collective Transport and Dynamics in Charge Density Wave Conductor Niobium Triselenide

We investigated low-temperature dynamics in a charge density wave (CDW) conductor NbSe3, a widely studied representative of a class of systems of driven periodic media with quenched disorder and relevant to a wider group of systems exhibiting collective transport behaviors. To date, theoretical efforts have not converged to produce a consistent description of the rich dynamics observed in these systems, especially in the low temperature regime. We developed modern sample preparation techniques and used frequency- and time-domain transport measurements below the second characteristic Peierls CDW transition to investigate the regime of temporally-ordered collective creep in NbSe3 samples in the low temperature regime between 15 K and 32 K. By measuring the frequency of coherent oscillations between two characteristic threshold fields, ET and ET*, we show that in nine high-quality samples, pure, Ta-, or Ti-doped, the current-field relation for the collective transport in this regime closely follows a modified Anderson-Kim form across five orders of magnitude with thermally- and field-activated behavior above ET for a range of temperatures. This study, combined with our transport relaxation measurements, provides relevant length, energy, and time scales that set the dynamics in this regime and reveals that the collective dynamics, governed by large length and energy scales, must be reconciled with microscopic local dynamics, with barriers at orders of magnitude smaller scales. The interplay between the collective and local mechanisms set the dynamics that is responsible for extremely slow (creep-like) collective, yet temporally-ordered behavior. Combined with the existing work, our results paint a consistent picture of a transport phase diagram for CDWs, and density-wave systems in general, and provide essential ingredients for a much-needed correct theoretical description of these systems.

cond-mat.str-el↗

arXiv2017

Reconfigurable re-entrant cavity for wireless coupling to an electro-optomechanical device

An electro-optomechanical device capable of microwave-to-optics conversion has recently been demonstrated, with the vision of enabling optical networks of superconducting qubits. Here we present an improved converter design that uses a three-dimensional (3D) microwave cavity for coupling between the microwave transmission line and an integrated LC resonator on the converter chip. The new design simplifies the optical assembly and decouples it from the microwave part of the setup. Experimental demonstrations show that the modular device assembly allows us to flexibly tune the microwave coupling to the converter chip while maintaining small loss. We also find that electromechanical experiments are not impacted by the additional microwave cavity. Our design is compatible with a high-finesse optical cavity and will improve optical performance.

quant-ph↗

arXiv2013

Tunable coupling to a mechanical oscillator circuit using a coherent feedback network

We demonstrate a fully cryogenic microwave feedback network composed of modular superconducting devices connected by transmission lines and designed to control a mechanical oscillator coupled to one of the devices. The network features an electromechanical device and a tunable controller that coherently receives, processes and feeds back continuous microwave signals that modify the dynamics and readout of the mechanical state. While previous electromechanical systems represent some compromise between efficient control and efficient readout of the mechanical state, as set by the electromagnetic decay rate, the tunable controller produces a closed-loop network that can be dynamically and continuously tuned between both extremes much faster than the mechanical response time. We demonstrate that the microwave decay rate may be modulated by at least a factor of 10 at a rate greater than $10^4$ times the mechanical response rate. The system is easy to build and suggests that some useful functions may arise most naturally at the network-level of modular, quantum electromagnetic devices.

cond-mat.supr-con↗

arXiv2012

Dynamical Autler-Townes control of a phase qubit

Routers, switches, and repeaters are essential components of modern information-processing systems. Similar devices will be needed in future superconducting quantum computers. In this work we investigate experimentally the time evolution of Autler-Townes splitting in a superconducting phase qubit under the application of a control tone resonantly coupled to the second transition. A three-level model that includes independently determined parameters for relaxation and dephasing gives excellent agreement with the experiment. The results demonstrate that the qubit can be used as a ON/OFF switch with 100 ns operating time-scale for the reflection/transmission of photons coming from an applied probe microwave tone. The ON state is realized when the control tone is sufficiently strong to generate an Autler-Townes doublet, suppressing the absorption of the probe tone photons and resulting in a maximum of transmission.

cond-mat.mes-hall↗

arXiv2011

Decoherence, Autler-Townes effect, and dark states in two-tone driving of a three-level superconducting system

We present a detailed theoretical analysis of a multi-level quantum system coupled to two radiation fields and subject to decoherence. We concentrate on an effect known from quantum optics as the Autler-Townes splitting, which has been recently demonstrated experimentally [M. A. Sillanpaa et al., Phys. Rev. Lett. 103, 193601 (2009)] in a superconducting phase qubit. In the three-level approximation, we derive analytical solutions and describe how they can be used to extract the decoherence rates and to account for the measurement data. Better agreement with the experiment can be obtained by extending this model to five levels. Finally, we investigate the stationary states created in the experiment and show that their structure is close to that of dark states.

cond-mat.mes-hall↗

arXiv2011

Autler-Townes effect in a superconducting three-level system

When a three-level quantum system is irradiated by an intense coupling field resonant with one of the three possible transitions, the absorption peak of an additional probe field involving the remaining level is split. This process is known in quantum optics as the Autler-Townes effect. We observe these phenomena in a superconducting Josephson phase qubit, which can be considered an "artificial atom" with a multilevel quantum structure. The spectroscopy peaks can be explained reasonably well by a simple three-level Hamiltonian model. Simulation of a more complete model (including dissipation, higher levels, and cross-coupling) provides excellent agreement with all the experimental data.

cond-mat.mes-hall↗

arXiv2010

Low-loss superconducting resonant circuits using vacuum-gap-based microwave components

We have produced high-quality complex microwave circuits, such as multiplexed resonators and superconducting phase qubits, using a "vacuum-gap" technology that eliminates lossy dielectric materials. We have improved our design and fabrication strategy beyond our earlier work, leading to increased yield, enabling the realization of these complex circuits. We incorporate both novel vacuum-gap wiring crossovers (VGX) for gradiometric inductors and vacuum-gap capacitors(VGC) on chip to produce resonant circuits that have large internal quality factors (30,000<Q<165,000) at 50 mK, outperforming most dielectric-filled devices. Resonators with VGCs as large as 180 pF confirm single mode behavior of our lumped-element components.

cond-mat.mes-hall↗

arXiv2010

Measurement crosstalk between two phase qubits coupled by a coplanar waveguide

We analyze the measurement crosstalk between two flux-biased phase qubits coupled by a resonant coplanar waveguide cavity. After the first qubit is measured, the superconducting phase can undergo damped oscillations resulting in an a.c. voltage that produces a frequency chirped noise signal whose frequency crosses that of the cavity. We show experimentally that the coplanar waveguide cavity acts as a bandpass filter that can significantly reduce the crosstalk signal seen by the second qubit when its frequency is far from the cavity's resonant frequency. We present a simple classical description of the qubit behavior that agrees well with the experimental data. These results suggest that measurement crosstalk between superconducting phase qubits can be reduced by use of linear or possibly nonlinear resonant cavities as coupling elements.

cond-mat.supr-con↗

arXiv2008

Vacuum-Gap Capacitors for Low-Loss Superconducting Resonant Circuits

Low-loss microwave components are used in many superconducting resonant circuits from multiplexed readouts of low-temperature detector arrays to quantum bits. Two-level system defects in amorphous dielectric materials cause excess energy loss. In an effort to improve capacitor components, we have used optical lithography and micromachining techniques to develop superconducting parallel-plate capacitors in which lossy dielectrics are replaced by vacuum gaps. Resonance measurements at 50 mK on lumped LC circuits that incorporate these vacuum-gap capacitors (VGCs) reveal loss tangents at low powers as low as 4x10^{-5}, significantly lower than with capacitors using amorphous dielectrics. VGCs are structurally robust, small, and easily scaled to capacitance values above 100 pF.

cond-mat.supr-con↗