arXiv subjects

Kathrin Castiglione

Publications and source records attributed to Kathrin Castiglione.

11 recordsLinked to original sources

arXiv2025

Modulation Schemes for Functionalized Vesicle-based MC Transmitters

Molecular communication (MC) enables information exchange through the transmission of signaling molecules (SMs) and holds promise for many innovative applications. However, most existing works in MC rely on simplified transmitter (TX) models that do not account for the physical and biochemical limitations of realistic biological hardware and environments. This work extends previous efforts toward developing models for practical MC systems by proposing a more realistic TX model that incorporates the delay in SM release and TX noise introduced by biological components. Building on this more realistic, functionalized vesicle-based TX model, we propose two novel modulation schemes specifically designed for this TX to mitigate TX-induced memory effects that arise from delayed and imperfectly controllable SM release. The proposed modulation schemes enable low-complexity receiver designs by mitigating memory effects directly at the TX. Numerical evaluations demonstrate that the proposed schemes improve communication reliability under realistic biochemical constraints, offering an important step toward physically realizable MC systems.

cs.ET↗

arXiv2025

Closed-Loop Long-Term Experimental Molecular Communication System

We present a fluid-based experimental molecular communication (MC) testbed which uses media modulation. Motivated by the natural human cardiovascular system, the testbed operates in a closed-loop tube system. The proposed system is designed to be biocompatible, resource-efficient, and controllable from outside the tube. As signaling molecule, the testbed employs the green fluorescent protein variant "Dreiklang" (GFPD). GFPDs can be reversibly switched via light of different wavelengths between a bright fluorescent state and a less fluorescent state. GFPDs in solution are filled into the testbed prior to the start of information transmission and remain there for an entire experiment. For information transmission, an optical transmitter (TX) and an optical eraser (EX), which are located outside the tube, are used to write and erase the information encoded in the state of the GFPDs, respectively. At the receiver (RX), the state of the GFPDs is read out by fluorescence detection. In our testbed, due to the closed-loop setup, we observe new forms of inter-symbol interferences (ISI), which do not occur in short experiments and open-loop systems. For the testbed, we developed a communication scheme, which includes blind transmission start detection, symbol-by-symbol synchronization, and adaptive threshold detection. We comprehensively analyze our MC experiments using different performance metrics. Moreover, we experimentally demonstrate the error-free transmission of 5370 bit at a data rate of 36 $\textrm{bit}\, \textrm{min}^{\boldsymbol{-1}}$ using 8-ary modulation and the error-free binary transmission of around 90000 bit at a data rate of 12 $\textrm{bit}\, \textrm{min}^{\boldsymbol{-1}}$. For the latter experiment, data was transmitted for a period of 125 hours. All signals recorded and parts of the evaluation code are publicly available on Zenodo and Github, respectively.

cs.ET↗

arXiv2025

MC for Agriculture: A Framework for Nature-inspired Sustainable Pest Control

In agriculture, molecular communication (MC) is envisioned as a framework to address critical challenges such as smart pest control. While conventional approaches mostly rely on synthetic plant protection products, posing high risks for the environment, harnessing plant signaling processes can lead to innovative approaches for nature-inspired sustainable pest control. In this paper, we investigate an approach for sustainable pest control and reveal how the MC paradigm can be employed for analysis and optimization. In particular, we consider a system where herbivore-induced plant volatiles (HIPVs), specifically methyl salicylate (MeSA), is encapsulated into microspheres deployed on deployed on plant leaves. The controlled release of MeSA from the microspheres, acting as transmitters (TXs), supports pest deterrence and antagonist attraction, providing an eco-friendly alternative to synthetic plant protection products. Based on experimental data, we investigate the MeSA release kinetics and obtain an analytical model. To describe the propagation of MeSA in farming environments, we employ a three dimensional (3D) advection-diffusion model, incorporating realistic wind fields which are predominantly affecting particle propagation, and solve it by a finite difference method (FDM). The proposed model is used to investigate the MeSA distribution for different TX arrangements, representing different practical microsphere deployment strategies. Moreover, we introduce the coverage effectiveness index (CEI) as a novel metric to quantify the environmental coverage of MeSA. This analysis offers valuable guidance for the practical development of microspheres and their deployment aimed at enhancing coverage and, consequently, the attraction of antagonistic insects.

eess.SP↗

arXiv2025

Practical Transmitters for Molecular Communication: Functionalized Nanodevices Employing Cooperative Transmembrane Transport Proteins

This paper introduces a novel optically controllable molecular communication (MC) transmitter (TX) design based on vesicular nanodevices (NDs). The NDs are functionalized for the controlled release of signaling molecules (SMs) via transmembrane proteins. The proposed design contributes to overcoming the current barrier between MC theory and practical implementation, as all components of the system are chemically realizable. The NDs possess an optical-to-chemical conversion capability, therefore, the proposed NDs can be employed as externally controllable TXs in various MC systems. The proposed ND design comprises two cooperating modules, namely an energizing module and a release module, and, depending on the specific choices for the modules, allows for the release of different types of SMs. After introducing the general system model for the proposed realistic TX design, we provide a detailed mathematical analysis of a specific TX realization. In particular, we derive both an exact and a closed-form approximate analytical solution for the concentration of the released SMs and validate our results by comparison with a numerical solution. Moreover, we model the impact of a buffering medium, which is typically present in liquid environments, e.g., in experimental settings or in in-body applications. This allows the evaluation of the feasibility of our proposed TX design in practical chemical implementations. We consider various forms of parameter randomness occurring during vesicle synthesis, i.e., deviations which are unavoidable during experiments. We show that considering random distributions of the parameter values, such as the ND size, the number of incorporated proteins on the vesicle surface, and the vesicle membrane permeability, is crucial for an adequate kinetic analysis of the system.

cs.ET↗

arXiv2023

Closed Loop Molecular Communication Testbed: Setup, Interference Analysis, and Experimental Results

In this paper, we present a fluid-based experimental molecular communication (MC) testbed that, similar to the human cardiovascular system, operates in a closed circuit tube system. The proposed system is designed to be biocompatible, resource-efficient, and controllable from outside the tube. As signaling molecule, the testbed employs the green fluorescent protein variant "Dreiklang" (GFPD). GFPDs can be reversibly switched via light of different wavelengths between a bright fluorescent state and a less fluorescent state. Hence, this property allows for writing and erasing information encoded in the state of the GFPDs already present in the fluid via radiation from outside the tube. The concept of modulating the GFPDs existing in the channel at the transmitter for information transmission, instead of releasing new molecules, is a form of media modulation. In our testbed, due to the closed loop setup and the long experiment durations of up to 250 min, we observe new forms of inter-symbol interferences (ISI), which do not occur in short experiments and open loop systems. In particular, up to four different forms of ISI, namely channel ISI, inter-loop ISI, offset ISI, and permanent ISI, occur in the considered system. To mitigate inter-loop ISI and offset ISI, we propose a light based eraser unit. We experimentally demonstrate reliable information transmission in our testbed achieving error-free transmission of 500 bit at a data rate of 6 bit/min based on a sub-optimal low-complexity detection scheme.

cs.ET↗

arXiv2023

Switchable Signaling Molecules for Media Modulation: Fundamentals, Applications, and Research Directions

Although visionary applications of molecular communication (MC), such as long-term continuous health monitoring by cooperative in-body nanomachines, have been proposed, MC is still in its infancy when it comes to practical implementation. In particular, long-term experiments and applications face issues such as depletion of signaling molecules (SMs) at the transmitter (TX) and inter-symbol interference (ISI) at the receiver (RX). To overcome these practical challenges, a new class of SMs with switchable states seems to be promising for future MC applications. In this work, we provide an overview of existing switchable SMs, and classify them according to their properties. Furthermore, we highlight how switchable SMs can be utilized as information carriers for media modulation. In addition, we present theoretical and experimental results for an end-to-end MC system employing the green fluorescent protein variant "Dreiklang" (GFPD) as switchable SM. Our experimental results show, for the first time, successful information transmission in a closed-loop pipe system using media modulation. Finally, we discuss media modulation specific challenges and opportunities.

cs.ET↗

arXiv2023

Media Modulation based Molecular Communication

In conventional molecular communication (MC) systems, the signaling molecules used for information transmission are stored, released, and then replenished by a transmitter (TX). However, the replenishment of signaling molecules at the TX is challenging in practice. Furthermore, in most envisioned MC applications, e.g., in the medical field, it is not desirable to insert the TX into the MC system, as this might impair natural biological processes. In this paper, we propose the concept of media modulation based MC where the TX is placed outside the channel and utilizes signaling molecules already present inside the system. The signaling molecules can assume different states which can be switched by external stimuli. Hence, in media modulation based MC, the TX modulates information into the state of the signaling molecules. In particular, we exploit the group of photochromic molecules, which undergo light-induced reversible state transitions, for media modulation. We study the usage of these molecules for information transmission in a three-dimensional duct system, which contains an eraser, a TX, and a receiver for erasing, writing, and reading of information via external light, respectively. We develop a statistical model for the received signal which accounts for the distribution of the signaling molecules in the system, the initial states of the signaling molecules, the reliability of the state control mechanism, the randomness of irrepressible, spontaneous state switching, and the randomness of molecule propagation. We adopt a maximum likelihood detector and a threshold based detector. Furthermore, we derive analytical expressions for the optimal threshold value and the resulting bit error rate (BER), respectively. Our results reveal that media modulation enables reliable information transmission, validating it as a promising alternative to MC based on molecule emitting TXs.

q-bio.BM↗

arXiv2022

Measurement of minute volumes of chiral molecules using in-fiber polarimetry

We report an opto-fluidic method that enables to efficiently measure the enantiomeric excess of chiral molecules at low concentration. The approach is to monitor the optical activity induced by a Kagome-lattice hollow-core photonic crystal fiber filled with a sub-ul volume of chiral compound. The technique also allows monitoring the enzymatic racemization of R mandelic acid.

physics.optics↗

arXiv2022

Controlled Signaling and Transmitter Replenishment for MC with Functionalized Nanoparticles

In this paper, we propose novel Transmitter (Tx) models for Molecular Communication (MC) systems based on functionalized Nanoparticles (NPs). Current Tx models often rely on simplifying assumptions for the molecule release and replenishment mechanisms. In contrast, we propose a Tx model where the signaling molecule release is controlled by a switchable membrane driven by an external trigger. Moreover, we propose a reloading mechanism, where signaling molecules are harvested based on an enzymatic reaction. Hence, no repeated injection of signaling molecules is required. For the proposed Tx model, we develop a general mathematical description in terms of a discrete-time transfer function model. Furthermore, we investigate two realizations of the proposed Tx model, i.e., an idealized Tx relying on simplifying assumptions, and a realistic Tx employing practical components for the reloading and release mechanisms. Finally, we numerically evaluate the proposed model and compare our results to stochastic Particle Based Simulations (PBSs).

cs.ET↗

arXiv2021

Media Modulation in Molecular Communications

In conventional molecular communication (MC) systems, the signaling molecules used for information transmission are stored, released, and then replenished by a transmitter (TX). However, the replenishment of signaling molecules at the TX is challenging in practice. Furthermore, in most envisioned MC applications, e.g., in the medical field, it is not desirable to insert the TX into the MC system, as this might impair natural biological processes. In this paper, we propose the concept of media modulation based MC where the TX is placed outside the channel and utilizes signaling molecules already existing inside the system. We consider signaling molecules that can be in different states which can be switched by external stimuli. Hence, in media modulation based MC, for information transmission, the TX stimulates the signaling molecules to encode information into their state. In particular, we elaborate media modulation for the group of photochromic molecules, which undergo light-induced reversible transformations, and study the usage of these molecules for information transmission in a three-dimensional duct system. We develop a statistical model for the received signal which depends on the distribution of the signaling molecules in the system, the reliability of the state control mechanism, and the randomness of molecule propagation. Furthermore, we analyze the performance of media modulation based MC in terms of the bit error rate (BER). We show that media modulation enables reliable information transmission, which renders a TX inside the channel unnecessary.

cs.ET↗

arXiv2020

A Survey of Biological Building Blocks for Synthetic Molecular Communication Systems

Synthetic molecular communication (MC) is a new communication engineering paradigm which is expected to enable revolutionary applications such as smart drug delivery and real-time health monitoring. The design and implementation of synthetic MC systems (MCSs) at nano- and microscale is very challenging. This is particularly true for synthetic MCSs employing biological components as transmitters and receivers or as interfaces with natural biological MCSs. Nevertheless, since such biological components have been optimized by nature over billions of years, using them in synthetic MCSs is highly promising. This paper provides a survey of biological components that can potentially serve as the main building blocks, i.e., transmitter, receiver, and signaling particles, for the design and implementation of synthetic MCSs. Nature uses a large variety of signaling particles of different sizes and with vastly different properties for communication among biological entities. Here, we focus on three important classes of signaling particles: cations (specifically protons and calcium ions), neurotransmitters (specifically acetylcholine, dopamine, and serotonin), and phosphopeptides. For each of these candidate signaling particles, we present several specific transmitter and receiver structures mainly built upon proteins that are capable of performing the distinct physiological functionalities required from the transmitters and receivers of MCSs. Moreover, we present options for both microscale implementation of MCSs as well as the micro-to-macroscale interfaces needed for experimental evaluation of MCSs. Furthermore, we outline new research directions for the implementation and the theoretical design and analysis of the proposed transmitter and receiver architectures.

cs.ET↗