arXiv subjects

Kathryn A. Moler

Publications and source records attributed to Kathryn A. Moler.

At least 37 records · Page 2Linked to original sources

arXiv2018

Observation of the signatures of sub-resolution defects in two-dimensional superconductors with scanning SQUID

The diamagnetic susceptibility of a superconductor is directly related to its superfluid density. Mutual inductance is a highly sensitive method for characterizing thin films; however, in traditional mutual inductance measurements, the measured response is a non-trivial average over the area of the mutual inductance coils, which are typically of millimeter size. Here we image localized, isolated features in the diamagnetic susceptibility of δ-doped SrTiO3, the 2-DES at the interface between LaAlO3 and SrTiO3, and Nb superconducting thin film systems using scanning superconducting quantum interference device susceptometry, with spatial resolution as fine as 0.7 μm. We show that these features can be modeled as locally suppressed superfluid density, with a single parameter that characterizes the strength of each feature. This method provides a systematic means of finding and quantifying submicron defects in two-dimensional superconductors.

cond-mat.supr-con↗

arXiv2018

Micron-scale measurements of low anisotropic strain response of local $T_c$ in Sr$_2$RuO$_4$

Strontium ruthenate (Sr$_2$RuO$_4$) is a multiband superconductor that displays evidence of topological superconductivity, although a model of the order parameter that is consistent with all experiments remains elusive. We integrated a piezoelectric-based strain apparatus with a scanning superconducting quantum interference device (SQUID) microscope to map the diamagnetic response of single-crystal Sr$_2$RuO$_4$ as a function of temperature, uniaxial pressure, and position with micron-scale spatial resolution. We thereby obtained local measurements of the superconducting transition temperature $T_c$ vs. anisotropic strain $ε$ with sufficient sensitivity for comparison to theoretical models that assume a uniform $p_x\pm ip_y$ order parameter. We found that $T_c$ varies with position and that the locally measured $T_c$ vs. $ε$ curves are quadratic ($T_c\proptoε^2$), as allowed by the C$_4$ symmetry of the crystal lattice. We did not observe the low-strain linear cusp ($T_c\propto \left| ε\right|$) that would be expected for a two-component order parameter such as $p_x\pm ip_y$. These results provide new input for models of the order parameter of Sr$_2$RuO$_4$.

cond-mat.supr-con↗

arXiv2018

Modulation of superconducting transition temperature in LaAlO$_{3}$/SrTiO$_{3}$ by SrTiO$_{3}$ structural domains

The tetragonal domain structure in SrTiO$_{3}$ (STO) is known to modulate the normal-state carrier density in LaAlO$_{3}$/SrTiO$_{3}$ (LAO/STO) heterostructures, among other electronic properties, but the effect of STO domains on the superconductivity in LAO/STO has not been fully explored. Using a scanning SQUID susceptometer microscope to map the superconducting response as a function of temperature in LAO/STO, we find that the superconducting transition temperature is spatially inhomogeneous and modulated in a pattern that is characteristic of structural domains in the STO.

cond-mat.supr-con↗

arXiv2018

Spatially modulated susceptibility in thin film La$_{2-x}$Ba$_x$CuO$_4$

The high critical temperature superconductor Lanthanum Barium Copper Oxide (La2-xBaxCuO4 or LBCO) exhibits a strong anomaly in critical temperature at 1/8th doping, nematicity, and other interesting properties. We report here Scanning Superconducting Quantum Interference Device (SQUID) imaging of the magnetic fields and susceptibility in a number of thin film LBCO samples with doping in the vicinity of the 1/8th anomaly. Spatially resolved measurements of the critical temperatures of these samples do not show a pronounced depression at 1/8th doping. They do, however, exhibit strong, nearly linear modulations of the susceptibility ("straie") of multiple samples with surprisingly long periods of 1-4 microns. Counterintuitively, vortices trap in positions of largest diamagnetic susceptibility in these striae. Given the rich interplay of different orders in this material system and its known sensitivity to epitaxial strain, we propose phase separation as a possible origin of these features and discuss scenarios in which that might arise.

cond-mat.supr-con↗

arXiv2018

A micro-SQUID with dispersive readout for magnetic scanning microscopy

We have designed and characterized a micro-SQUID with dispersive readout for use in low temperature scanning probe microscopy systems. The design features a capacitively shunted RF SQUID with a tunable resonance frequency from 5 to 12 GHz, micrometer spatial resolution and integrated superconducting coils for local application of magnetic fields. The SQUID is operated as a nonlinear oscillator with a flux- and power-dependent resonance frequency. Measurements for device characterization and noise benchmarking were carried out at 4 K. The measured flux noise above 10 kHz at 4 K is $80\;\mathrm{n}Φ_0 \mathrm{Hz}^{-1/2}$ at a bandwidth of 200 MHz. Estimations suggest that one can benefit from parametric gain based on inherent nonlinearity of the Josephson junction and reduce the flux noise to $30\;\mathrm{n}Φ_0\mathrm{Hz}^{-1/2}$ at 100 mK, which corresponds to $7.5\;\mathrm{μ_B Hz^{-1/2}}$ for a magnetic moment located at the center of the pickup loop.

cond-mat.supr-con↗

arXiv2017

Spatially modulated magnetic structure of EuS due to the tetragonal domain structure of SrTiO$_3$

The combination of ferromagnets with topological superconductors or insulators allows for new phases of matter that support excitations such as chiral edge modes and Majorana fermions. EuS, a wide-band-gap ferromagnetic insulator with a Curie temperature around 16 K, and SrTiO$_3$ (STO), an important substrate for engineering heterostructures, may support these phases. We present scanning superconducting quantum interference device (SQUID) measurements of EuS grown epitaxially on STO that reveal micron-scale variations in ferromagnetism and paramagnetism. These variations are oriented along the STO crystal axes and only change their configuration upon thermal cycling above the STO cubic-to-tetragonal structural transition temperature at 105 K, indicating that the observed magnetic features are due to coupling between EuS and the STO tetragonal structure. We speculate that the STO tetragonal distortions may strain the EuS, altering the magnetic anisotropy on a micron-scale. This result demonstrates that local variation in the induced magnetic order from EuS grown on STO needs to be considered when engineering new phases of matter that require spatially homogeneous exchange.

cond-mat.mtrl-sci↗

arXiv2017

Current-phase relations of few-mode InAs nanowire Josephson junctions

Gate-tunable semiconductor nanowires with superconducting leads have great potential for quantum computation and as model systems for mesoscopic Josephson junctions. The supercurrent, $I$, versus the phase, $ϕ$, across the junction is called the current-phase relation (CPR). It can reveal not only the amplitude of the critical current, but also the number of modes and their transmission. We measured the CPR of many individual InAs nanowire Josephson junctions, one junction at a time. Both the amplitude and shape of the CPR varied between junctions, with small critical currents and skewed CPRs indicating few-mode junctions with high transmissions. In a gate-tunable junction, we found that the CPR varied with gate voltage: Near the onset of supercurrent, we observed behavior consistent with resonant tunneling through a single, highly transmitting mode. The gate dependence is consistent with modeled subband structure that includes an effective tunneling barrier due to an abrupt change in the Fermi level at the boundary of the gate-tuned region. These measurements of skewed, tunable, few-mode CPRs are promising both for applications that require anharmonic junctions and for Majorana readout proposals.

cond-mat.mes-hall↗

arXiv2016

Determining the vibrations between sensor and sample in SQUID microscopy

Vibrations can cause noise in scanning probe microscopies. Relative vibrations between the scanning sensor and the sample are important but can be more difficult to determine than absolute vibrations or vibrations relative to the laboratory. We measure the noise spectral density in a scanning SQUID microscope as a function of position near a localized source of magnetic field, and show that we can determine the spectra of all three components of the relative sensor-sample vibrations. This method is a powerful tool for diagnosing vibrational noise in scanning microscopies.

cond-mat.mes-hall↗

arXiv2016

Edge Transport in the Trivial Phase of InAs/GaSb

We present transport and scanning SQUID measurements on InAs/GaSb double quantum wells, a system predicted to be a two-dimensional topological insulator. Top and back gates allow independent control of density and band offset, allowing tuning from the trivial to the topological regime. In the trivial regime, bulk conductivity is quenched but transport persists along the edges, superficially resembling the predicted helical edge-channels in the topological regime. We characterize edge conduction in the trivial regime in a wide variety of sample geometries and measurement configurations, as a function of temperature, magnetic field, and edge length. Despite similarities to studies claiming measurements of helical edge channels, our characterization points to a non-topological origin for these observations.

cond-mat.mes-hall↗

arXiv2016

Scanning SQUID susceptometers with sub-micron spatial resolution

Superconducting QUantum Interference Device (SQUID) microscopy has excellent magnetic field sensitivity, but suffers from modest spatial resolution when compared with other scanning probes. This spatial resolution is determined by both the size of the field sensitive area and the spacing between this area and the sample surface. In this paper we describe scanning SQUID susceptometers that achieve sub-micron spatial resolution while retaining a white noise floor flux sensitivity of $\approx 2μΦ_0/Hz^{1/2}$. This high spatial resolution is accomplished by deep sub-micron feature sizes, well shielded pickup loops fabricated using a planarized process, and a deep etch step that minimizes the spacing between the sample surface and the SQUID pickup loop. We describe the design, modeling, fabrication, and testing of these sensors. Although sub-micron spatial resolution has been achieved previously in scanning SQUID sensors, our sensors not only achieve high spatial resolution, but also have integrated modulation coils for flux feedback, integrated field coils for susceptibility measurements, and batch processing. They are therefore a generally applicable tool for imaging sample magnetization, currents, and susceptibilities with higher spatial resolution than previous susceptometers.

cond-mat.supr-con↗

arXiv2016

Enhanced Superconducting Transition Temperature due to Tetragonal Domains in Two-Dimensionally Doped SrTiO$_3$

Strontium titanate is a low-temperature, non-Bardeen-Cooper-Schrieffer superconductor that superconducts to carrier concentrations lower than in any other system and exhibits avoided ferroelectricity at low temperatures. Neither the mechanism of superconductivity in strontium titanate nor the importance of the structure and dielectric properties for the superconductivity are well understood. We studied the effects of twin structure on superconductivity in a 5.5-nm-thick layer of niobium-doped SrTiO$_{3}$ embedded in undoped SrTiO$_{3}$. We used a scanning superconducting quantum interference device susceptometer to image the local diamagnetic response of the sample as a function of temperature. We observed regions that exhibited a superconducting transition temperature $T_{c}$ $\gtrsim$ 10% higher than the temperature at which the sample was fully superconducting. The pattern of these regions varied spatially in a manner characteristic of structural twin domains. Our results emphasize that the anisotropic dielectric properties of SrTiO$_{3}$ are important for its superconductivity, and need to be considered in any theory of the mechanism of the superconductivity.

cond-mat.supr-con↗

arXiv2015

Observation of chiral currents at the magnetic domain boundary of a topological insulator

A magnetic domain boundary on the surface of a three-dimensional topological insulator is predicted to host a chiral edge state, but direct demonstration is challenging. Here, we used a scanning superconducting quantum interference device to show that current in a magnetized EuS/Bi2Se3 heterostructure flows at the edge when the Fermi level is gate-tuned to the surface band gap. We further induced micron-scale magnetic structures on the heterostructure, and detected a chiral edge current at the magnetic domain boundary. The chirality of the current was determined by magnetization of the surrounding domain and its magnitude by the local chemical potential rather than the applied current. Such magnetic structures, provide a platform for detecting topological magnetoelectric effects and may enable progress in quantum information processing and spintronics.

cond-mat.mes-hall↗

arXiv2014

Non-sinusoidal current-phase relationship in Josephson junctions from the 3D topological insulator HgTe

We use Superconducting QUantum Interference Device (SQUID) microscopy to characterize the current-phase relation (CPR) of Josephson Junctions from 3-dimentional topological insulator HgTe (3D-HgTe). We find clear skewness in the CPRs of HgTe junctions ranging in length from 200 nm to 600 nm. The skewness indicates that the Josephson current is predominantly carried by Andreev bound states with high transmittance, and the fact that the skewness persists in junctions that are longer than the mean free path suggests that the effect may be related to the helical nature of the Andreev bound states in the surface of HgTe.

cond-mat.mes-hall↗

arXiv2014

Images of edge current in InAs/GaSb quantum wells

Quantum spin Hall devices with edges much longer than several microns do not display ballistic transport: that is, their measured conductances are much less than $e^2/h$ per edge. We imaged edge currents in InAs/GaSb quantum wells with long edges and determined an effective edge resistance. Surprisingly, although the effective edge resistance is much greater than $h/e^2$, it is independent of temperature up to 30 K within experimental resolution. Known candidate scattering mechanisms do not explain our observation of an effective edge resistance that is large yet temperature-independent.

cond-mat.mes-hall↗

arXiv2013

Locally enhanced conductivity due to the tetragonal domain structure in LaAlO$_{3}$/SrTiO$_{3}$ heterointerfaces

The ability to control materials properties through interface engineering is demonstrated by the appearance of conductivity at the interface of certain insulators, most famously the {001} interface of the band insulators LaAlO$_{3}$ and TiO$_{2}$-terminated SrTiO$_{3}$ (STO). Transport and other measurements in this system show a plethora of diverse physical phenomena. To better understand the interface conductivity, we used scanning superconducting quantum interference device microscopy to image the magnetic field locally generated by current in an interface. At low temperature, we found that the current flowed in conductive narrow paths oriented along the crystallographic axes, embedded in a less conductive background. The configuration of these paths changed on thermal cycling above the STO cubic-to-tetragonal structural transition temperature, implying that the local conductivity is strongly modified by the STO tetragonal domain structure. The interplay between substrate domains and the interface provides an additional mechanism for understanding and controlling the behaviour of heterostructures.

cond-mat.mtrl-sci↗

arXiv2012

Imaging currents in HgTe quantum wells in the quantum spin Hall regime

The quantum spin Hall (QSH) state is a genuinely new state of matter characterized by a non-trivial topology of its band structure. Its key feature is conducting edge channels whose spin polarization has potential for spintronic and quantum information applications. The QSH state was predicted and experimentally demonstrated to exist in HgTe quantum wells. The existence of the edge channels has been inferred from the fact that local and non-local conductance values in sufficiently small devices are close to the quantized values expected for ideal edge channels and from signatures of the spin polarization. The robustness of the edge channels in larger devices and the interplay between the edge channels and a conducting bulk are relatively unexplored experimentally, and are difficult to assess via transport measurements. Here we image the current in large Hallbars made from HgTe quantum wells by probing the magnetic field generated by the current using a scanning superconducting quantum interference device (SQUID). We observe that the current flows along the edge of the device in the QSH regime, and furthermore that an identifiable edge channel exists even in the presence of disorder and considerable bulk conduction as the device is gated or its temperature is raised. Our results represent a versatile method for the characterization of new quantum spin Hall materials systems, and confirm both the existence and the robustness of the predicted edge channels.

cond-mat.mes-hall↗

arXiv2012

Agreement between local and global measurements of the London penetration depth

Recent measurements of the superconducting penetration depth in Ba(Fe_1-x Co_x)2As2 appeared to disagree on the magnitude and curvature of Δλ_{ab}(T), even near optimal doping. These measurements were carried out on different samples grown by different groups. To understand the discrepancy, we use scanning SQUID susceptometry and a tunnel diode resonator to measure the penetration depth in a single sample. The penetration depth observed by the two techniques is identical with no adjustments. We conclude that any discrepancies arise from differences between samples, either in growth or crystal preparation.

cond-mat.supr-con↗

arXiv2012

Measurements of the gate tuned superfluid density in superconducting LaAlO3/SrTiO3

The interface between the insulating oxides LaAlO3 and SrTiO3 exhibits a superconducting two-dimensional electron system that can be modulated by a gate voltage. While gating of the conductivity has been probed extensively and gating of the superconducting critical temperature has been demonstrated, the question whether, and if so how, the gate tunes the superfluid density and superconducting order parameter is unanswered. We present local magnetic susceptibility, related to the superfluid density, as a function of temperature, gate voltage and location. We show that the temperature dependence of the superfluid density at different gate voltages collapse to a single curve characteristic of a full superconducting gap. Further, we show that the dipole moments observed in this system are not modulated by the gate voltage.

cond-mat.supr-con↗