arXiv subjects

Katja Mombaur

Publications and source records attributed to Katja Mombaur.

17 recordsLinked to original sources

arXiv2026

What is the effect of running-specific prostheses on long jumps? Optimization-based prediction and analysis using biomechanical models

Long jumpers with below the knee amputation (BKA) that take off from their running-specific prosthesis (RSP) improved performances significantly over the last years. The long jump biomechanics differs compared to athletes without BKA and the question arises whether the spring-like properties of the RSP facilitate achieving long jumping distances. The aim of this work is to propose a long jump model for athletes with and without BKA, to evaluate it and to apply it for comparing long jump motions with and without RSP. We establish rigid multi-body system models of one athlete with and one athlete without below the knee amputation (BKA). Long jump motions are computed by solving a specific optimal control problem (OCP) with constraints enforcing a physically correct dynamics, both for motion reconstruction or motion synthesis. With the proposed long jump model, we are able to compute realistic long jump motions. We discuss the causes of differences in measured long jumps and show directions for eliminating them. For both athletes, the synthesized solutions reveal potential for performance improvement. The jumping distance of the athlete without BKA is 64cm (6.9%) longer than the one of the athlete with BKA in the synthesized solutions.

cs.RO↗

arXiv2026

Identifying the Key Biomechanical Features of Movement Adaptation during Exoskeleton-Assisted Locomotion

The understanding of natural human adaptation during exoskeleton-assisted locomotion - particularly individual differences in adaptation behaviors and temporal progression - remains limited. In this work, we investigate temporal evolution of biomechanical variables to uncover participant-specific adaptation strategies across different exoskeleton-assisted locomotion scenarios. Nine healthy participants performed treadmill walking under three conditions: without an exoskeleton, with exoskeleton active ankle assistance, and with exoskeleton zero-torque. Lower limb kinematics, inter-joint coordination, and metabolic cost of transport (MCoT) were analyzed at both the group and individual levels. Results indicate that adaptation is gradual and highly individualized, with substantial variability in convergence timing and movement patterns across participants. Kinematic adaptation occurred asynchronously across lower limb, with larger fluctuations during the swing phase. Metabolic responses were heterogeneous and often non-convergent, highlighting the limitations of steady-state assumptions commonly adopted in the literature. These findings emphasize the importance of individual-level, temporal evolution analyses for understanding adaptation dynamics in exoskeleton use.

cs.RO↗

arXiv2026

Effects of Robotic Touch on Older Users During Walking Guidance by a Humanoid Robot

The shortage of healthcare staff is a challenge in geriatric care. To address this, robots can be integrated into care settings to provide assistance and emotional support. A promising application is walking guidance, particularly benefiting older adults as navigation skills deteriorate with aging. As walking guidance involves direct contact, the aim of this study is to understand how older adults perceive and respond to different touch modes during guided walking. 24 older adults (68 - 88 yrs.) walked four times a ten-meter trajectory guided by the robot TIAGo Pro in four contact conditions: no physical contact (NC); physical contact through holding the robot's wrist with the hand (HH); physical interaction through linking arms with the robot (LA); and physical contact through resting the forearm on the robots forearm (FC). A multimodal assessment approach included electrocardiogram, electrodermal activity, contact force, distance to robot, and questionnaires. Physiological results reveal a slight increase in stress levels during robot interaction. Behavioural and subjective measures, however, show overall acceptance of robotic touch. The two conditions corresponding to larger interaction forces (HH and FC) were associated with lower relative distances between participant and robot, indicating a higher trust and confidence. Questionnaire responses supported these findings, evidencing greater perceived safety, trust and comfort in these conditions. This study provides insights for the design of robotic walking guidance assistance, indicating that gentle, stable touch is preferred by older adults in comparison to contactless interaction.

cs.RO↗

arXiv2026

Perception of Social Robots as Communication Partners in Healthcare for Older Adults

Addressing the global caregiver shortage through socially assistive robots necessitates a deep understanding of their psychological and physiological impacts on older adults during human-robot interaction (HRI). This study addresses whether social robots can serve as effective interaction partners compared to humans, and if "positive prompts" can similarly enhance these interactions. We conducted a comparative study with 35 participants (aged 70+). Our multi-modal analysis, integrating facial expression data, heart rate variability, and subjective questionnaires, revealed no significant differences in overall stress levels between human and robot interactions. Facial expression analysis confirmed that the robot was accepted as a valid interaction partner, while physiological data showed slightly lower heart rates during robot interactions, suggesting a more relaxed state compared to human-led sessions. These findings indicate that social robots can engage older adults without inducing psychological strain and are capable of alleviating caregiver burden by performing structured tasks, such as health-sensing surveys. Future work should address the identified "appearance-content mismatch" in robot design to facilitate even more natural and effective interactions.

cs.RO↗

arXiv2026

Not an Obstacle for Dog, but a Hazard for Human: A Co-Ego Navigation System for Guide Dog Robots

Guide dogs offer independence to Blind and Low-Vision (BLV) individuals, yet their limited availability leaves the vast majority of BLV users without access. Quadruped robotic guide dogs present a promising alternative, but existing systems rely solely on the robot's ground-level sensors for navigation, overlooking a critical class of hazards: obstacles that are transparent to the robot yet dangerous at human body height, such as bent branches. We term this the viewpoint asymmetry problem and present the first system to explicitly address it. Our Co-Ego system adopts a dual-branch obstacle avoidance framework that integrates the robot-centric ground sensing with the user's elevated egocentric perspective to ensure comprehensive navigation safety. Deployed on a quadruped robot, the system is evaluated in a controlled user study with sighted participants under blindfold across three conditions: unassisted, single-view, and cross-view fusion. Results demonstrate that cross-view fusion significantly reduces collision times and cognitive load, verifying the necessity of viewpoint complementarity for safe robotic guide dog navigation.

cs.RO↗

arXiv2024

Learning Skateboarding for Humanoid Robots through Massively Parallel Reinforcement Learning

Learning-based methods have proven useful at generating complex motions for robots, including humanoids. Reinforcement learning (RL) has been used to learn locomotion policies, some of which leverage a periodic reward formulation. This work extends the periodic reward formulation of locomotion to skateboarding for the REEM-C robot. Brax/MJX is used to implement the RL problem to achieve fast training. Initial results in simulation are presented with hardware experiments in progress.

cs.RO↗

arXiv2024

Development and Validation of a Modular Sensor-Based System for Gait Analysis and Control in Lower-Limb Exoskeletons

With rapid advancements in exoskeleton hardware technologies, successful assessment and accurate control remain challenging. This study introduces a modular sensor-based system to enhance biomechanical evaluation and control in lower-limb exoskeletons, utilizing advanced sensor technologies and fuzzy logic. We aim to surpass the limitations of current biomechanical evaluation methods confined to laboratories and to address the high costs and complexity of exoskeleton control systems. The system integrates inertial measurement units, force-sensitive resistors, and load cells into instrumented crutches and 3D-printed insoles. These components function both independently and collectively to capture comprehensive biomechanical data, including the anteroposterior center of pressure and crutch ground reaction forces. This data is processed through a central unit using fuzzy logic algorithms for real-time gait phase estimation and exoskeleton control. Validation experiments with three participants, benchmarked against gold-standard motion capture and force plate technologies, demonstrate our system's capability for reliable gait phase detection and precise biomechanical measurements. By offering our designs open-source and integrating cost-effective technologies, this study advances wearable robotics and promotes broader innovation and adoption in exoskeleton research.

cs.RO↗

arXiv2024

Complete Autonomous Robotic Nasopharyngeal Swab System with Evaluation on a Stochastically Moving Phantom Head

The application of autonomous robotics to close-contact healthcare tasks has a clear role for the future due to its potential to reduce infection risks to staff and improve clinical efficiency. Nasopharyngeal (NP) swab sample collection for diagnosing upper-respiratory illnesses is one type of close contact task that is interesting for robotics due to the dexterity requirements and the unobservability of the nasal cavity. We propose a control system that performs the test using a collaborative manipulator arm with an instrumented end-effector to take visual and force measurements, under the scenario that the patient is unrestrained and the tools are general enough to be applied to other close contact tasks. The system employs a visual servo controller to align the swab with the nostrils. A compliant joint velocity controller inserts the swab along a trajectory optimized through a simulation environment, that also reacts to measured forces applied to the swab. Additional subsystems include a fuzzy logic system for detecting when the swab reaches the nasopharynx and a method for detaching the swab and aborting the procedure if safety criteria is violated. The system is evaluated using a second robotic arm that holds a nasal cavity phantom and simulates the natural head motions that could occur during the procedure. Through extensive experiments, we identify controller configurations capable of effectively performing the NP swab test even with significant head motion, which demonstrates the safety and reliability of the system.

cs.RO↗

arXiv2024

Robotic Eye-in-hand Visual Servo Axially Aligning Nasopharyngeal Swabs with the Nasal Cavity

The nasopharyngeal (NP) swab test is a method for collecting cultures to diagnose for different types of respiratory illnesses, including COVID-19. Delegating this task to robots would be beneficial in terms of reducing infection risks and bolstering the healthcare system, but a critical component of the NP swab test is having the swab aligned properly with the nasal cavity so that it does not cause excessive discomfort or injury by traveling down the wrong passage. Existing research towards robotic NP swabbing typically assumes the patient's head is held within a fixture. This simplifies the alignment problem, but is also dissimilar to clinical scenarios where patients are typically free-standing. Consequently, our work creates a vision-guided pipeline to allow an instrumented robot arm to properly position and orient NP swabs with respect to the nostrils of free-standing patients. The first component of the pipeline is a precomputed joint lookup table to allow the arm to meet the patient's arbitrary position in the designated workspace, while avoiding joint limits. Our pipeline leverages semantic face models from computer vision to estimate the Euclidean pose of the face with respect to a monocular RGB-D camera placed on the end-effector. These estimates are passed into an unscented Kalman filter on manifolds state estimator and a pose based visual servo control loop to move the swab to the designated pose in front of the nostril. Our pipeline was validated with human trials, featuring a cohort of 25 participants. The system is effective, reaching the nostril for 84% of participants, and our statistical analysis did not find significant demographic biases within the cohort.

cs.RO↗

arXiv2024

Collaborative Robot Arm Inserting Nasopharyngeal Swabs with Admittance Control

The nasopharyngeal (NP) swab sample test, commonly used to detect COVID-19 and other respiratory illnesses, involves moving a swab through the nasal cavity to collect samples from the nasopharynx. While typically this is done by human healthcare workers, there is a significant societal interest to enable robots to do this test to reduce exposure to patients and to free up human resources. The task is challenging from the robotics perspective because of the dexterity and safety requirements. While other works have implemented specific hardware solutions, our research differentiates itself by using a ubiquitous rigid robotic arm. This work presents a case study where we investigate the strengths and challenges using compliant control system to accomplish NP swab tests with such a robotic configuration. To accomplish this, we designed a force sensing end-effector that integrates with the proposed torque controlled compliant control loop. We then conducted experiments where the robot inserted NP swabs into a 3D printed nasal cavity phantom. Ultimately, we found that the compliant control system outperformed a basic position controller and shows promise for human use. However, further efforts are needed to ensure the initial alignment with the nostril and to address head motion.

cs.RO↗

arXiv2024

Dancing with REEM-C: A robot-to-human physical-social communication study

Humans often work closely together and relay a wealth of information through physical interaction. Robots, on the other hand, are not yet able to work similarly closely with humans and to effectively convey information when engaging in physical-social human-robot interaction (psHRI). This currently limits the potential of human-robot collaboration to solve real-world problems. This paper investigates how to establish clear and intuitive robot-to-human communication, while considering human comfort during psHRI. We approach this question from the perspective of a leader-follower dancing scenario, in which a full-body humanoid robot leads a human by signaling the next steps through a choice of communication modalities including haptic, visual, and audio signals. This is achieved through the development of a split whole-body control framework combining admittance and impedance control on the upper body, with position control on the lower body for balancing and stepping. Robot-led psHRI participant experiments allowed us to verify controller performance, as well as to build an understanding of what types of communication work better from the perspective of human partners, particularly in terms of perceived effectiveness and comfort.

cs.RO↗

arXiv2024

Learning Velocity-based Humanoid Locomotion: Massively Parallel Learning with Brax and MJX

Humanoid locomotion is a key skill to bring humanoids out of the lab and into the real-world. Many motion generation methods for locomotion have been proposed including reinforcement learning (RL). RL locomotion policies offer great versatility and generalizability along with the ability to experience new knowledge to improve over time. This work presents a velocity-based RL locomotion policy for the REEM-C robot. The policy uses a periodic reward formulation and is implemented in Brax/MJX for fast training. Simulation results for the policy are demonstrated with future experimental results in progress.

cs.RO↗

arXiv2023

Estimating speaker direction on a humanoid robot with binaural acoustic signals

To achieve human-like behaviour during speech interactions, it is necessary for a humanoid robot to estimate the location of a human talker. Here, we present a method to optimize the parameters used for the direction of arrival (DOA) estimation, while also considering real-time applications for human-robot interaction scenarios. This method is applied to binaural sound source localization framework on a humanoid robotic head. Real data is collected and annotated for this work. Optimizations are performed via a brute force method and a Bayesian model based method, results are validated and discussed, and effects on latency for real-time use are also explored.

cs.RO↗

arXiv2018

Optimizing wearable assistive devices with neuromuscular models and optimal control

The coupling of human movement dynamics with the function and design of wearable assistive devices is vital to better understand the interaction between the two. Advanced neuromuscular models and optimal control formulations provide the possibility to study and improve this interaction. In addition, optimal control can also be used to generate predictive simulations that generate novel movements for the human model under varying optimization criterion.

cs.RO↗

arXiv2018

Motion optimization and parameter identification for a human and lower-back exoskeleton model

Designing an exoskeleton to reduce the risk of low-back injury during lifting is challenging. Computational models of the human-robot system coupled with predictive movement simulations can help to simplify this design process. Here, we present a study that models the interaction between a human model actuated by muscles and a lower-back exoskeleton. We provide a computational framework for identifying the spring parameters of the exoskeleton using an optimal control approach and forward-dynamics simulations. This is applied to generate dynamically consistent bending and lifting movements in the sagittal plane. Our computations are able to predict motions and forces of the human and exoskeleton that are within the torque limits of a subject. The identified exoskeleton could also yield a considerable reduction of the peak lower-back torques as well as the cumulative lower-back load during the movements. This work is relevant to the research communities working on human-robot interaction, and can be used as a basis for a better human-centered design process.

cs.RO↗

arXiv2017

Walking of the iCub humanoid robot in different scenarios: implementation and performance analysis

The humanoid robot iCub is a research platform of the Fondazione Istituto Italiano di Tecnologia (IIT), spread among different institutes around the world. In the most recent version of iCub, the robot is equipped with stronger legs and bigger feet, allowing it to perform balancing and walking motions that were not possible with the first generations. Despite the new legs hardware, walking has been rarely performed on the iCub robot. In this work the objective is to implement walking motions on the robot, from which we want to analyze its walking capabilities. We developed software modules based on extensions of classic techniques such as the ZMP based pattern generator and position control to identify which are the characteristics as well as limitations of the robot against different walking tasks in order to give the users a reference of the performance of the robot. Most of the experiments have been performed with HeiCub, a reduced version of iCub without arms and head.

cs.RO↗

arXiv2001

Prediction of stable walking for a toy that cannot stand

Previous experiments [M. J. Coleman and A. Ruina, Phys. Rev. Lett. 80, 3658 (1998)] showed that a gravity-powered toy with no control and which has no statically stable near-standing configurations can walk stably. We show here that a simple rigid-body statically-unstable mathematical model based loosely on the physical toy can predict stable limit-cycle walking motions. These calculations add to the repertoire of rigid-body mechanism behaviors as well as further implicating passive-dynamics as a possible contributor to stability of animal motions.

physics.class-ph↗