Searcharxiv⌕ Search

arXiv subjects

Kazu Akiba

Publications and source records attributed to Kazu Akiba.

7 recordsLinked to original sources

First demonstration of $50\,\mathrm{ps}$ four-dimensional vertex reconstruction with the Timepix4 beam telescope

The first demonstration of 4D vertex reconstruction at the $50\,\mathrm{ps}$ scale using a silicon pixel detector is reported. Hadronic interactions are produced by directing a $180\,\mathrm{GeV}/c$ mixed-hadron beam onto a fixed target upstream of the Timepix4 beam telescope at the CERN SPS. The resulting particles are reconstructed using 4D track and vertex fits that include time directly alongside the spatial parameters. The vertex time resolution follows the expected statistical scaling with the number of timing measurements, reaching $54\pm5\,\mathrm{ps}$ for vertices reconstructed from 16 timing-plane clusters. An irreducible component of $29.2\pm0.6\,\mathrm{ps}$ remains in the fitted resolution model, including sizeable contributions from the clock distribution and the time reference system rather than from the combination of the timing measurements. The observed scaling down to $54\,\mathrm{ps}$ without an unforeseen resolution floor above represents a significant experimental step towards precision-timing in future high-pile-up detectors.

physics.ins-det↗

Neural network-based timewalk correction for the Timepix4 ASIC

Timewalk corrections of hybrid pixel detectors conventionally employ heuristic fits performed independently in bins of the relevant input variables. This requires both an explicit functional ansatz and binning scheme, as well as densely populated calibration data whose required size grows rapidly as further input variables are added. This paper presents a timewalk correction for the Timepix4 readout chip based on a compact feed-forward neural network (NN), which learns the dependence directly from the input variables without requiring an explicit functional ansatz or binning. The NN is compared against the fit-based baseline using data from the Timepix4 beam telescope at the CERN SPS in 2025, with $100\,\mathrm{μm}$ and $300\,\mathrm{μm}$ thick planar sensors. Both methods parameterise the timewalk correction as a function of the measured charge and reconstructed intrapixel impact position. With only 20 % of the calibration data, the NN already achieves the same asymptotic time resolutions as the fit-based baseline: $180\,\mathrm{ps}$ and $300\,\mathrm{ps}$ for the two thicknesses, respectively.

physics.ins-det↗

The Timepix4 Beam Telescope

The spatial and temporal performance of a telescope system comprising planar silicon sensors bump-bonded to Timepix4-v2 ASICs are assessed at the CERN SPS using a $180$~GeV/$c$ mixed hadron beam. The pointing resolution at the centre of the telescope is $2.3 \pm 0.1\;\mathrm{μm}$ and $2.4 \pm 0.1\mathrm{μm}$ in x and y directions, respectively. The temporal resolution for the combined timestamps on a track using only the information from the Timepix4 planes is found to be $92 \pm 5$~ps. The telescope is extensively described including its data acquisition system and dedicated software as well as the corrections applied to the raw measurements.

hep-ex↗

Reconstruction of charged tracks with Timepix4 ASICs

The design of a detector system comprised of four silicon sensors bump-bonded to Timepix4 ASICs is described together with its data acquisition system, operational infrastructure, and dedicated software. The spatial and temporal performance of the system are assessed with a 180 GeV/c mixed hadron beam at the CERN SPS and reported in detail. Particle tracks are reconstructed using time-space measurements from the four detector planes. The spatial hit resolution is assessed to be $(15.5\pm 0.5)$ $μ$m and $(4.5\pm0.3)$ $μ$m for 100 and 300 $μ$m thick sensors, respectively. The timestamps from the detectors are also measured with fine precision, yielding time resolutions of $(452\pm10)$ ps, $(420\pm10)$ ps, $(639\pm10)$ ps, $(631\pm10)$ ps for the two 100 and two 300 $μ$m thick sensors respectively. These measurements are combined to a track time resolution of $(340\pm 5)$ ps.

physics.ins-det↗

Microchannel cooling for the LHCb VELO Upgrade I

The LHCb VELO Upgrade I, currently being installed for the 2022 start of LHC Run 3, uses silicon microchannel coolers with internally circulating bi-phase \cotwo for thermal control of hybrid pixel modules operating in vacuum. This is the largest scale application of this technology to date. Production of the microchannel coolers was completed in July 2019 and the assembly into cooling structures was completed in September 2021. This paper describes the R\&D path supporting the microchannel production and assembly and the motivation for the design choices. The microchannel coolers have excellent thermal peformance, low and uniform mass, no thermal expansion mismatch with the ASICs and are radiation hard. The fluidic and thermal performance is presented.

physics.ins-det↗

Temporal characterisation of silicon sensors on Timepix3 ASICs

The timing performance of silicon sensors bump-bonded to Timepix3 ASICs is investigated, prior to and after different types of irradiation up to $8 \times 10^{15} 1 \mathrm{\,Me\kern -0.1em V} \mathrm{ \,n_{eq}} {\mathrm{ \,cm}}^{-2}$. The sensors have been tested with a beam of charged particles in two different configurations, perpendicular to and almost parallel to the incident beam. The second approach, known as the grazing angles method, is shown to be a powerful method to investigate not only the charge collection, but also the time-to-threshold properties as a function of the depth at which the charges are liberated.

physics.ins-det↗

LHCb VELO Timepix3 Telescope

The LHCb VELO Timepix3 telescope is a silicon pixel tracking system constructed initially to evaluate the performance of LHCb VELO Upgrade prototypes. The telesope consists of eight hybrid pixel silicon sensor planes equipped with the Timepix3 ASIC. The planes provide excellent charge measurement, timestamping and spatial resolution and the system can function at high track rates. This paper describes the construction of the telescope and its data acquisition system and offline reconstruction software. A timing resolution of 350~ps was obtained for reconstructed tracks. A pointing resolution of better than 2~\mum was determined for the 180~GeV/c %\gevc mixed hadron beam at the CERN SPS. The telescope has been shown to operate at a rate of 5 million particles~\unit{s^{-1}\cdot cm^{-2}} without a loss in efficiency.

physics.ins-det↗