arXiv subjects

Kazu Suenaga

Publications and source records attributed to Kazu Suenaga.

At least 37 records · Page 2Linked to original sources

arXiv2021

Deciphering the Intense Post-Gap Absorptions of Monolayer Transition Metal Dichalcogenides

Rich valleytronics and diverse defect-induced or interlayer pre-bandgap excitonics have been extensively studied in transition metal dichalcogenides (TMDCs), a system with fascinating optical physics. However, more intense high-energy absorption peaks (~ 3 eV) above the bandgaps used to be long ignored and their underlying physical origin remains to be unveiled. Here, we employ momentum resolved electron energy loss spectroscopy to measure the dispersive behaviors of the valley excitons and intense higher-energy peaks at finite momenta. Combined with accurate Bethe Salpeter equation calculations, non-band-nesting transitions at Q valley and at midpoint of KM are found to be responsible for the high-energy broad absorption peaks in tungsten dichalcogenides and present spin polarizations similar to A excitons, in contrast with the band-nesting mechanism in molybdenum dichalcogenides. Our experiment-theory joint research will offer insights into the physical origins and manipulation of the intense high-energy excitons in TMDCs-based optoelectronic devices.

cond-mat.mtrl-sci↗

arXiv2021

Tunable Doping of Rhenium and Vanadium into Transition Metal Dichalcogenides for Two-Dimensional Electronics

Two-dimensional (2D) transition metal dichalcogenides (TMDCs) with unique electrical properties are fascinating materials used for future electronics. However, the strong Fermi level pinning effect at the interface of TMDCs and metal electrodes always leads to high contact resistance, which seriously hinders their application in 2D electronics. One effective way to overcome this is to use metallic TMDCs or transferred metal electrodes as van der Waals (vdW) contacts. Alternatively, using highly conductive doped TMDCs will have a profound impact on the contact engineering of 2D electronics. Here, a novel chemical vapor deposition using mixed molten salts is established for vapor-liquid-solid growth of high-quality rhenium (Re) and vanadium (V)-doped TMDC monolayers with high controllability and reproducibility. A tunable semiconductor to metal transition is observed in the Re and V-doped TMDCs. Electrical conductivity increases up to a factor of 108 in the degenerate V-doped WS2 and WSe2. Using V-doped WSe2 as vdW contact, the on-state current and on/off ratio of WSe2-based field-effect transistors have been substantially improved (from ~10-8 to 10-5 A; ~104 to 108), compared to metal contacts. Future studies on lateral contacts and interconnects using doped TMDCs will pave the way for 2D integrated circuits and flexible electronics.

cond-mat.mtrl-sci↗

arXiv2021

Electron spectroscopy of single quantum objects to directly correlate the local structure to their electronic transport and optical properties

Physical property of a single quantum object is governed by its precise atomic arrangement. The direct correlation of localized physical properties with the atomic structures has been therefore strongly desired but still limited in the theoretical studies. Here, we have successfully examined the localized electronic properties of individual carbon nanotubes by means of high-resolution electron energy-loss spectroscopy combined with high-resolution transmission electron microscopy. Well-separated sharp peaks at the carbon K(1s) absorption edge and in the valence-loss spectra are obtained from a single freestanding carbon nanotube with the local chiral index and unambiguously identified as the transitions between the van Hove singularities. The spectra features clearly vary upon the different areas even in the individual carbon nanotube. Variations in interband transitions, plasmonic behaviors and unoccupied electronic structures are clearly attributed to the local irregular atomic arrangement such as topological defect and/or elastic bond stretching.

physics.atom-ph↗

arXiv2020

Proton and Li-Ion Permeation through Graphene with Eight-Atom-Ring Defects

Defect-free graphene is impermeable to gases and liquids but highly permeable to thermal protons. Atomic-scale defects such as vacancies, grain boundaries and Stone-Wales defects are predicted to enhance graphene's proton permeability and may even allow small ions through, whereas larger species such as gas molecules should remain blocked. These expectations have so far remained untested in experiment. Here we show that atomically thin carbon films with a high density of atomic-scale defects continue blocking all molecular transport, but their proton permeability becomes ~1,000 times higher than that of defect-free graphene. Lithium ions can also permeate through such disordered graphene. The enhanced proton and ion permeability is attributed to a high density of 8-carbon-atom rings. The latter pose approximately twice lower energy barriers for incoming protons compared to the 6-atom rings of graphene and a relatively low barrier of ~0.6 eV for Li ions. Our findings suggest that disordered graphene could be of interest as membranes and protective barriers in various Li-ion and hydrogen technologies.

cond-mat.mtrl-sci↗

arXiv2019

Probing exciton dispersions of freestanding monolayer WSe2 by momentum resolved electron energy loss spectroscopy

Momentum resolved electron energy-loss spectroscopy was used to measure the dispersions of excitons in a free-standing monolayer of WSe2. Besides the parabolically dispersed valley excitons, a sub-gap dispersive exciton was observed at specific q values for the first time. The simultaneous STEM-ADF imaging of the local probed areas suggests that this sub-gap exciton is attributed to the prolific Se vacancies.

cond-mat.mtrl-sci↗

arXiv2019

Does the metallic 1T phase WS2 really exist?

The electronic and optical properties of transition metal dichalcogenides (TMDCs) in distinctive phases, such as 1H, 1T, and 1T' phases, are of fundamental importance for variety of applications. The 1H phase has been understood as a direct bandgap semiconductor. On the other hand, the electronic properties of the 1T and 1T' phases remain controversy in the theoretical and experimental perspectives. In this study, we explore the optical properties of monolayer WS2 in 1H, 1T, and 1T' phases using Raman and photoluminescence, corroborated with the atomic structure identified by scanning transmission electron microscopy. Despite of earlier theoretical investigations which all predict the metallic 1T phase, we experimentally discovered that the 1T-phase WS2 is a direct band gap semiconductor and optically indistinguishable from the 1H phase. In a sharp contrast, the 1T'-phase WS2 shows a gapless nature in its bandstructure with the quenched exciton transition as expected. Our experimental findings may give an interesting twist on the existing literatures reporting the metallic nature of 1T phase because the 1T phase has a strong tendency to co-exist with the metallic 1T' phase.

cond-mat.mtrl-sci↗

arXiv2019

Wafer-Scale and Deterministic Patterned Growth of Monolayer MoS2 via Vapor-Liquid-Solid Method

Vapor transportation is the core process in growing transition-metal dichalcogenides (TMDCs) by chemical vapor deposition (CVD). One inevitable problem is the spatial inhomogeneity of the vapors. The non-stoichiometric supply of transition-metal precursors and chalcogen leads to poor control in products' location, morphology, crystallinity, uniformity and batch to batch reproducibility. While vapor-liquid-solid (VLS) growth involves molten precursors at the growth temperatures higher than their melting points. The liquid sodium molybdate can precipitate solid MoS2 monolayers when saturated with sulfur vapor. Taking advantage of the VLS growth, we achieved three kinds of important achievements: (a) 4-inch-wafer-scale uniform growth of MoS2 flakes on SiO2/Si substrates, (b) 2-inch-wafer-scale growth of continuous MoS2 film with a grain size exceeding 100 um on sapphire substrates, and (c) pattern (site-controlled) growth of MoS2 flakes and film. We clarified that the VLS growth thus pave the new way for the high-efficient, scalable synthesis of two-dimensional TMDC monolayers.

cond-mat.mtrl-sci↗

arXiv2019

Exciton mapping at subwavelength scales in two-dimensional materials

Spatially resolved EELS has been performed at diffuse interfaces between MoS$_2$ and MoSe$_2$ single layers. With a monochromated electron source (20 meV) we have successfully probed excitons near the interface by obtaining the low loss spectra at the nanometer scale. The exciton maps clearly show variations even with a 10 nm separation between measurements; consequently the optical bandgap can be measured with nanometer-scale resolution, which is 50 times smaller than the wavelength of the emitted photons. By performing core-loss EELS at the same regions, we observe that variations in the excitonic signature follow the chemical composition. The exciton peaks are observed to be broader at interfaces and heterogeneous regions, possibly due to interface roughness and alloying effects. Moreover, we do not observe shifts of the exciton peak across the interface, possibly because the interface width is not much larger than the exciton Bohr radius.

cond-mat.mes-hall↗

arXiv2019

Momentum Conserved Ultrafast Charge Transfer Dynamics of Interlayer Excitons in vdW Heterostructures

Heterostructures comprising van der Waals (vdW) stacked transition metal dichalcogenide (TMDC) monolayers are a fascinating class of two-dimensional (2D) materials with unique properties. The presence of interlayer excitons, where the electron and the hole remain spatially separated in the two layers due to ultrafast charge transfer, is an intriguing feature of these heterostructures. Inevitably, the efficiency of 2D heterostructure devices is critically dependent on the charge transfer dynamics. However, the role of the relative rotation angle of the constituent layers on this charge transfer dynamics is hitherto unknown. Here, we investigate MoS$_2$/WSe$_2$ vdW heterostructures (hMWs) using monochromated low-loss electron energy loss (EEL) spectroscopy combined with aberration-corrected scanning transmission electron microscopy (STEM), and report that momentum conservation is a critical factor in the charge transfer dynamics of TMDC vdW heterostructures. The low-loss EEL spectra of the heterostructures with various rotation angles reveal that the charge transfer rate can be about one order-of-magnitude faster in the aligned (or anti-aligned) case than the misaligned cases. These results provide a deeper insight into the role of the fundamental principle of momentum conservation in 2D vdW heterostructure charge transfer dynamics.

cond-mat.mes-hall↗

arXiv2018

Position and momentum mapping of vibrations in graphene nanostructures in the electron microscope

Propagating atomic vibrational waves, phonons, rule important thermal, mechanical, optoelectronic and transport characteristics of materials. Thus the knowledge of phonon dispersion, namely the dependence of vibrational energy on momentum is a key ingredient to understand and optimize the material's behavior. However, despite its scientific importance in the last decade, the phonon dispersion of a freestanding monolayer of two dimensional (2D) materials such as graphene and its local variations has still remained elusive because of experimental limitations of vibrational spectroscopy. Even though electron energy loss spectroscopy (EELS) in transmission has recently been shown to probe the local vibrational charge responses, these studies are yet limited to polar materials like boron nitride or oxides, in which huge signals induced by strong dipole moments are present. On the other hand, measurements on graphene performed by inelastic x-ray (neutron) scattering spectroscopy or EELS in reflection do not have any spatial resolution and require large microcrystals. Here we provide a new pathway to determine the phonon dispersions down to the scale of an individual freestanding graphene monolayer by mapping the distinct vibration modes for a large momentum transfer. The measured scattering intensities are accurately reproduced and interpreted with density functional perturbation theory (DFPT). Additionally, a nanometre-scale mapping of selected momentum (q) resolved vibration modes using graphene nanoribbon structures has enabled us to spatially disentangle bulk, edge and surface vibrations.

cond-mat.mtrl-sci↗

arXiv2018

One-dimensional van der Waals heterostructures

Property by design is one appealing idea in material synthesis but hard to achieve in practice. A recent successful example is the demonstration of van der Waals (vdW) heterostructures,1-3 in which atomic layers are stacked on each other and different ingredients can be combined beyond symmetry and lattice matching. This concept, usually described as a nanoscale Lego blocks, allows to build sophisticated structures layer by layer. However, this concept has been so far limited in two dimensional (2D) materials. Here we show a class of new material where different layers are coaxially (instead of planarly) stacked. As the structure is in one dimensional (1D) form, we name it "1D vdW heterostructures". We demonstrate a 5 nm diameter nanotube consisting of three different materials: an inner conductive carbon nanotube (CNT), a middle insulating hexagonal boron nitride nanotube (BNNT) and an outside semiconducting MoS2 nanotube. As the technique is highly applicable to other materials in the current 2D libraries,4-6 we anticipate our strategy to be a starting point for discovering a class of new semiconducting nanotube materials. A plethora of function-designable 1D heterostructures will appear after the combination of CNTs, BNNTs and semiconducting nanotubes.

cond-mat.mtrl-sci↗

arXiv2018

Transport evidence of asymmetric spin-orbit coupling in few$-$layer superconducting 1Td$-$MoTe$_2$

Two-dimensional (2D) transition metal dichalcogenides (TMDCs) MX2 (M=W, Mo, Nb, and X=Te, Se, S) with strong spin-orbit coupling (SOC) possess plenty of novel physics including superconductivity. Due to the Ising SOC, monolayer NbSe$_2$ and gated MoS$_2$ of 2H structure can realize the Ising superconductivity phase, which manifests itself with in-plane upper critical field far exceeding Pauli paramagnetic limit. Surprisingly, we find that a few-layer 1Td structure MoTe$_2$ also exhibits an in-plane upper critical field ($H_{c2,//}$) which goes beyond the Pauli paramagnetic limit. Importantly, the in-plane upper critical field shows an emergent two-fold symmetry which is different from the isotropic $H_{c2,//}$ in 2H structure TMDCs. We show that this is a result of an asymmetric SOC in 1Td structure TMDCs. The asymmetric SOC is very strong and estimated to be on the order of tens of meV. Our work provides the first transport evidence of a new type of asymmetric SOC in TMDCs which may give rise to novel superconducting and spin transport properties. Moreover, our findings mostly depend on the symmetry of the crystal and apply to a whole class of 1Td TMDCs such as 1Td-WTe$_2$ which is under intense study due to its topological properties.

cond-mat.supr-con↗

arXiv2017

Experimental determination of the local optical conductivity of a semiconducting carbon nanotube and its modification at individual defects

Measurements of optical properties at nanometre-level are of central importance for characterization of optoelectronic device. It was, however, hardly possible for the conventional light-probe measurements to determine the local optical properties from single quantum object with nanometrical inhomogeneity. Here we demonstrate the first successful determination of the absolute optical constants, including the optical conductivity and absorption coefficient, for an individual carbon nanotube with defects by comparing energy loss spectroscopy and optical absorption. The optical conductivity obtained from a certain type of defects indeed presents a characteristic modification near the lowest excitation peak (E11) where excitons and non-radiative transitions as well as phonon-coupled excitations are strongly involved. Detailed line-shape analysis of the E11 peak clearly shows different degree of exciton lifetime shortening and electronic state modification which is variable to the defect type.

cond-mat.mtrl-sci↗

arXiv2017

Towards atomically precise manipulation of 2D nanostructures in the electron microscope

Despite decades of research, the ultimate goal of nanotechnology--top-down manipulation of individual atoms--has been directly achieved with only one technique: scanning probe microscopy. In this Review, we demonstrate that scanning transmission electron microscopy (STEM) is emerging as an alternative method for the direct assembly of nanostructures, with possible applications in plasmonics, quantum technologies, and materials science. Atomically precise manipulation with STEM relies on recent advances in instrumentation that have enabled non-destructive atomic-resolution imaging at lower electron energies. While momentum transfer from highly energetic electrons often leads to atom ejection, interesting dynamics can be induced when the transferable kinetic energies are comparable to bond strengths in the material. Operating in this regime, very recent experiments have revealed the potential for single-atom manipulation using the Angstrom-sized electron beam. To truly enable control, however, it is vital to understand the relevant atomic-scale phenomena through accurate dynamical simulations. Although excellent agreement between experiment and theory for the specific case of atomic displacements from graphene has been recently achieved using density functional theory molecular dynamics, in many other cases quantitative accuracy remains a challenge. We provide a comprehensive reanalysis of available experimental data on beam-driven dynamics in light of the state-of-the-art in simulations, and identify important targets for improvement. Overall, the modern electron microscope has great potential to become an atom-scale fabrication platform, especially for covalently bonded 2D nanostructures. We review the developments that have made this possible, argue that graphene is an ideal starting material, and assess the main challenges moving forward.

cond-mat.mtrl-sci↗

arXiv2016

Large-area and high-quality 2D transition metal telluride

Atomically thin transitional metal ditellurides like WTe2 and MoTe2 have triggered tremendous research interests because of their intrinsic nontrivial band structure. They are also predicted to be 2D topological insulators and type-II Weyl semimetals. However, most of the studies on ditelluride atomic layers so far rely on the low-yield and time-consuming mechanical exfoliation method. Direct synthesis of large-scale monolayer ditellurides has not yet been achieved. Here, using the chemical vapor deposition (CVD) method, we demonstrate controlled synthesis of high-quality and atom-thin tellurides with lateral size over 300 μm. We found that the as-grown WTe2 maintains two different stacking sequences in the bilayer, where the atomic structure of the stacking boundary is revealed by scanning transmission electron microscope (STEM). The low-temperature transport measurements revealed a novel semimetal-to-insulator transition in WTe2 layers and an enhanced superconductivity in few-layer MoTe2. This work paves the way to the synthesis of atom-thin tellurides and also quantum spin Hall devices.

cond-mat.mtrl-sci↗

arXiv2015

Confined linear carbon chains: A route to bulk carbyne

The extreme instability and strong chemical activity of carbyne, the infinite sp1 hybridized carbon chain, are responsible for its low possibility to survive in ambient conditions. Therefore, much less has been possible to explore about carbyne as compared to other novel carbon allotropes such as fullerenes, nanotubes and graphene. Although end-capping groups can be used to stabilize carbon chains, length limitation is still a barrier for its actual production, and even more for applications. Here, we report a novel route for bulk production of record long acetylenic linear carbon chains protected by thin double-walled carbon nanotubes. A corresponding extremely high Raman band is the first proof of a truly bulk yield formation of very long arrangements, which is unambiguously confirmed by transmission electron microscopy and near-field Raman spectroscopy. Our production establishes a way to exceptionally long stable carbon chains including more than 2300 carbon atoms, and an elegant forerunner towards the final goal of a bulk production of essentially infinite carbyne.

cond-mat.mtrl-sci↗

arXiv2013

Atomic mechanism of phase transition between metallic and semiconducting MoS2 single-layers

Structural transformation between metallic (1T) and semiconducting (2H) phases of single-layered MoS2 was systematically investigated by an in situ STEM with atomic precision. The 1T/2H phase transition is comprised of S and/or Mo atomic-plane glides, and requires an intermediate phase (α-phase) as an indispensable precursor. Migration of two kinds of boundaries (β and γ-boundaries) is also found to be responsible for the growth of the second phase. The 1T phase can be intentionally introduced in the 2H matrix by using a high dose of incident electron beam during heating the MoS2 single-layers up to 400~700°C in high vacuum and indeed controllable in size. This work may lead to the possible fabrication of composite nano-devices made of local domains with distinct electronic properties.

cond-mat.mtrl-sci↗

arXiv2013

Properties of Individual Dopant Atoms in Single-Layer MoS2: Atomic Structure, Migration, and Enhanced Reactivity

The differences in the behavior of Re (n-type) and Au (p-type) dopant atoms in single-layered MoS2 were investigated by in situ scanning transmission electron microscopy. Re atoms tend to occupy Mo sites, while Au atoms exist as adatoms and show larger mobility under the electron beam. Re substituted to Mo site showed enhanced chemical affinity, evidenced by agglomeration of Re adatoms around these sites. This may explain the difficulties in achieving a high compositional rate of homogeneous Re doping in MoS2. In addition, an in situ coverage experiment together with density functional theory calculations discovered a high surface reactivity and agglomeration of other impurity atoms such as carbon at the Re doped sites.

cond-mat.mtrl-sci↗