arXiv subjects

Kazuhiko Kuroki

Publications and source records attributed to Kazuhiko Kuroki.

At least 109 records · Page 6Linked to original sources

arXiv2013

Superconductivity assisted by inter-layer pair hopping in multi-layered cuprates

In order to explore why the multi-layered cuprates have such high Tc's, we have examined various inter-layer processes. Since the inter-layer one-electron hopping has little effects on the band structure, we turn to the inter-layer pair hopping. The superconductivity in a double-layer Hubbard model with and without the inter-layer pair hopping, as studied by solving the Eliashberg equation with the fluctuation exchange approximation, reveals that the inter-layer pair hopping acts to increase the pairing interaction and the self-energy simultaneously, but that the former effect supersedes the latter and enhances the superconductivity. The inter-layer pair hopping considered here is for off-site pairs, for which we discuss the effect of retaining SU(2) symmetry, along with how the the sign of the pair hopping determines the relative configuration of d-waves between the adjacent layers.

cond-mat.supr-con↗

arXiv2013

Switching of intra-orbital spin excitations in electron-doped iron pnictide superconductors

We investigate the doping dependence of the magnetic excitations in two-superconducting-dome-system LaFeAsO1-xDx. Using inelastic neutron scattering, spin fluctuations at different wavenumbers were observed under both superconducting domes around x = 0.1 and 0.4, but vanished at x = 0.2 corresponding to the Tc valley. Theoretical calculations indicate that the characteristic doping dependence of spin fluctuations is rationally explained as a consequence of the switching of the two intra-orbital nestings within Fe-3dYZ, ZX and 3dX2-Y2 by electron doping. The present results imply that the multi-orbital nature plays an important role in the doping and / or material dependence of the Tc of the iron pnictide superconductors.

cond-mat.supr-con↗

arXiv2013

Robust spin fluctuations and $s\pm$ pairing in the heavily electron doped iron-based superconductors

We theoretically study the spin fluctuation and superconductivity in La1111 and Sm1111 iron-based superconductors for a wide range of electron doping. When we take into account the band structure variation by electron doping, the hole Fermi surface originating from the $d_{X^2-Y^2}$ orbital turns out to be robust against electron doping, and this gives rise to large spin fluctuations and consequently $s\pm$ pairing even in the heavily doped regime. The stable hole Fermi surface is larger for Sm1111 than for La1111, which can be considered as the origin of the apparent difference in the phase diagram.

cond-mat.supr-con↗

arXiv2013

Minimum model and its theoretical analysis for superconducting materials with BiS$_2$ layers

We perform first principles band calculation of the newly discovered superconductor LaO$_{1-x}$F$_x$BiS$_2$, and study the lattice structure and the fluorine doping dependence of the gap between the valence and conduction bands. We find that the distance between La and S as well as the fluorine doping significantly affects the band gap. On the other hand, the four orbital model of the BiS$_2$ layer shows that the lattice structure does not affect this portion of the band. Still, the band gap can affect the carrier concentration in the case of light electron doping, which in turn should affect the transport properties.

cond-mat.supr-con↗

arXiv2013

Ab initio GW calculation for organic compounds (TMTSF)2PF6

We present an ab initio GW calculation to study dynamical effects on an organic compound (TMTSF)2PF6. Calculated polarized reflectivities reproduce experimental plasma edges at around 0.2 eV for E||b' and 1.0 eV for E||a. The low-energy plasmons come out from the low-energy narrow bands energetically isolated from other higher-energy bands, and affect the low-energy electronic structure via the GW-type self-energy. Because of the quasi-one-dimensional band structure, a large plasmon-induced electron scattering is found in the low-energy occupied states along the X-M line.

cond-mat.str-el↗

arXiv2013

Two-orbital view on the origin of the material dependence of Tc in the single-layer cuprates

Using the dx2-y2+dz2 two orbital model of the high Tc cuprates obtained from the first-principle calculation, we show that the material dependence of the Fermi surface shape can be understood by the degree of the mixture between the dx2-y2$ and the dz2 orbitals. We explain, through investigating the tightbinding hopping integrals, why some cuprates have square shaped Fermi surface, while others have more rounded ones. From this viewpoint, we explain the experimentally observed correlation between the curvature of the Fermi surface and Tc.

cond-mat.supr-con↗

arXiv2013

Material Optimization for Fermi Surface Shape Control of Tl-based Cuprate Superconductors

To show an optimization method of element substitution for cuprate superconductors, we investigate Fermi surface shape of TlR2A2Cu3O9 with R=La, Y, and A=Li, Na, K, Rb, Cs. We adopt the generalized gradient approximation in the density-functional theory (DFT-GGA) for the study of over-doped phases of these unknown cuprates. The electronic structures of crystals optimized by DFT-GGA show systematic element dependence in a Fermi surface shape controlling parameter, r, of Cu dx2-y2 bands, where nearly absent dz2 component at the Fermi level and smaller r keeping t1 suggest enhancement of the superconducting transition temperature within the spin-fluctuation mechanism. For TlYRb2Cu3O9, smaller r by a reduction factor larger than 10% compared to a reference system of TlBa2Ca2Cu3O9 (TBCCO) appears in the outer CuO2 plane, but with 12 % reduction in t1. For TlR2Li2Cu3O9, (R=Y, La), smaller r by a factor larger than 1% appears keeping t1 as large as TBCCO in the inner plane. Our method may be used to predict an optimized material structure referencing known cuprate superconductors.

cond-mat.supr-con↗

arXiv2013

Understanding the re-entrant superconducting phase diagram of an iron-pnictide Ca$_4$Al$_2$O$_6$Fe$_2$(As$_{1-x}$P$_x$)$_2$

Recently, a very rich phase diagram has been obtained for an iron-based superconductor Ca4Al2O6Fe2(As1-xPx)2. It has been revealed that nodeless (x=0) and nodal (x = 1) superconductivity are separated by an antiferromagnetic phase. Here we study the origin of this peculiar phase diagram using a five orbital model constructed from first principles band calculation, and applying the fluctuation exchange approximation assuming spin fluctuation mediated pairing. Based on the calculation results, we propose a scenario where the frustration in momentum space degrades superconductivity in the intermediate x regime, while antiferromangetism takes place due to a very good nesting. In order to see whether the present theoretical scenario is consistent with the actual nature of the competition between superconductivity and antiferromagnetism, we also perform hydrostatic pressure experiment for Ca4Al2O6Fe2(As1-xPx)2. In the intermediate x regime where antiferromagnetism occurs at ambient pressure, applying hydrostatic pressure smears out the antiferromagnetic transition, but superconductivity does not take place. This supports our scenario that superconductivity is suppressed by the momentum space frustration in the intermediate x regime, apart from the presence of the antiferromangnetism.

cond-mat.supr-con↗

arXiv2013

Pudding-mold type band in a potential thermoelectric material CuAlO$_2$ : comparison with Na$_x$CoO$_2$

A potential thermoelectric material CuAlO$_2$ is theoretically studied. We first construct a model Hamiltonian of CuAlO$_2$ based on the first principles band calculation, and calculate the Seebeck coefficient. Then, we compare the model with that of a well-known thermoelectric material Na$_x$CoO$_2$, and discuss the similarities and the differences. It is found that the two materials are similar from an electronic structure viewpoint in that they have a peculiar pudding-mold type band shape, which is advantageous as thermoelectric materials. There are however some differences, and we analyze the origin of the difference from a microscopic viewpoint. The band shape of CuAlO$_2$ is found to be even more ideal than that of Na$_x$CoO$_2$, and we predict that once a significant amount of holes is doped in CuAlO$_2$, thermoelectric properties (especially the power factor) even better than that of Na$_x$CoO$_2$ can be expected.

cond-mat.mtrl-sci↗

arXiv2012

Model construction and superconductivity analysis of organic conductors β-(BDA-TTP)_2MF_6 (M=P, As, Sb, Ta) based on first principles band calculation

We perform a first principles band calculation for a group of quasi-two-dimensional organic conductors β-(BDA-TTP)2MF6 (M=P, As, Sb, Ta). The ab-initio calculation shows that the density of states (DOS) is correlated with the band width of singly occupied (highest) molecular orbital (SOMO), while it is not necessarily correlated with the unit cell volume. The direction of the major axis of the cross section of the Fermi surface lies in the Γ-B direction, which differs from that obtained by the extended Huckel calculation. Then, we construct a tight-binding model which accurately reproduces the ab-initio band structure. The obtained transfer energies give smaller dimerization than in the extended Huckel band. As for the difference of the anisotropy of the Fermi surface, the transfer energies along the inter-stacking direction are smaller than those obtained in the extended Huckel calculation. Assuming spin-fluctuation-mediated superconductivity, we apply random phase approximation (RPA) to a two-band Hubbard model. This two-band Hubbard model is composed of the tight-binding model derived from the first principles band structure and an on-site (intra-molecule) repulsive interaction taken as a variable parameter. The obtained superconducting gap changes sign four times along the Fermi surface like in a d-wave gap, and the nodal direction is different from that obtained in the extended Huckel model. Anion dependence of Tc is qualitatively consistent with the experimental observation.

cond-mat.supr-con↗

arXiv2012

Minimal electronic models for superconducting BiS$_2$ layers

We construct minimal electronic models for a newly discovered superconductor LaO$_{1-x}$F$_x$BiS$_2$ ($T_c=$ 10.6K) possessing BiS$_2$ layers based on first principles band calculation. First, we obtain a model consisting of two Bi $6p$ and two S $3p$ orbitals, which give nearly electron-hole symmetric bands. Further focusing on the bands that intersect the Fermi level, we obtain a model with two $p$ orbitals. The two bands (per BiS$_2$ layer) have quasi-one-dimensional character with a double minimum dispersion, which gives good nesting of the Fermi surface. At around $x\sim 0.5$ the topology of the Fermi surface changes, so that the density of states at the Fermi level becomes large. Possible pairing states are discussed.

cond-mat.supr-con↗

arXiv2012

Large Seebeck effect in the electron-doped FeAs$_2$ driven by quasi one dimensional pudding-mold type band

We investigate the thermoelectric propeties of the electron-doped FeAs$_2$ both experimentally and theoretically. Electrons are doped by partially substituting Se for As, which leads to a metallic behavior in the resistivity. A Seebeck coefficient of about $-$200 $μ$V/K is reached at 300 K for 1% doping, and about $-$120 $μ$V/K even at 5% doping. The origin of this large Seebeck coefficient despite the metallic conductivity is analyzed from a band structure point of view. The first-principles band calculation reveals the presence of a pudding-mold type band just above the band gap, somewhat similar to Na$_x$CoO$_2$, but with a quasi-one-dimensional nature. We calculate the Seebeck coefficient using a tightbinding model that correctly reproduces this band structure, and this gives results close to the experimental observations. The origin of this peculiar band shape is also discussed.

cond-mat.mtrl-sci↗

arXiv2012

First-principles band structure and FLEX approach to the pressure effect on $T_c$ of the cuprate superconductors

High-temperature cuprate superconductors have been known to exhibit significant pressure effects. In order to fathom the origin of why and how Tc is affected by pressure, we have recently studied the pressure effects on Tc adoptig a model that contains two cupper d-orbitals derived from first-principles band calculations, where the dz2 orbital is considere on top of the usually considered dx2-y2 orbital. In that paper, we have identified two origins for the Tc enhancement under hydrostatic pressure: (i) while at ambient pressure the smaller the hybridization of other orbital components the higher the Tc, an application of pressure acts to reduce the multiorbital mxing on the Fermi surface, which we call the orbital distillation effects, and (ii) the increase of the band width with pressure also contributes to the enhancement. In the present paper, we further elabolrate the two points. As for point (i), while the reduction of the apical oxygen height under pressure tends to increase the dz2 mixture, hence to lower Tc, here we show that this effect is strongly reduced in bi-layer materials due to the pyramidal coordination of oxygen atoms. As for point (ii), we show that the enhancement of Tc due to the increase in the band width is caused by the effect that the many-body renormalization arising from the self-energy is reduced.

cond-mat.supr-con↗

arXiv2012

Multiorbital analysis of the effects of uniaxial and hydrostatic pressure on $T_c$ in the single-layered cuprate superconductors

The origin of uniaxial and hydrostatic pressure effects on $T_c$ in the single-layered cuprate superconductors is theoretically explored. A two-orbital model, derived from first principles and analyzed with the fluctuation exchange approximation gives axial-dependent pressure coefficients, $\partial T_c/\partial P_a>0$, $\partial T_c/\partial P_c<0$, with a hydrostatic response $\partial T_c/\partial P>0$ for both La214 and Hg1201 cuprates, in qualitative agreement with experiments. Physically, this is shown to come from a unified picture in which higher $T_c$ is achieved with an "orbital distillation", namely, the less the $d_{x^2-y^2}$ main band is hybridized with the $d_{z^2}$ and $4s$ orbitals higher the $T_c$. Some implications for obtaining higher $T_c$ materials are discussed.

cond-mat.supr-con↗

arXiv2012

Corrugated flat band as an origin of large thermopower in hole doped PtSb$_2$

The origin of the recently discovered large thermopower in hole-doped PtSb$_2$ is theoretically analyzed based on a model constructed from first principles band calculation. It is found that the valence band dispersion has an overall flatness combined with some local ups and downs, which gives small Fermi surfaces scattered over the entire Brillouin zone. The Seebeck coefficient is calculated using this model, which gives good agreement with the experiment. We conclude that the good thermoelectric property originates from this "corrugated flat band", where the coexistence of large Seebeck coefficient and large electric conductivity is generally expected.

cond-mat.mtrl-sci↗

arXiv2012

Novel BiS2-based layered superconductor Bi4O4S3

Exotic superconductivity has often been discovered in materials with a layered (two-dimensional) crystal structure. The low dimensionality can affect the electronic structure and can realize high transition temperatures (Tc) and/or unconventional superconductivity mechanisms. As standard examples, we now have two types of high-Tc superconductors. The first group is the Cu-oxide superconductors whose crystal structure is basically composed of a stacking of spacer (blocking) layers and superconducting CuO2 layers.1-4 The second group is the Fe-based superconductors which also possess a stacking structure of spacer layers and superconducting Fe2An2 (An = P, As, Se, Te) layers.5-13 In both systems, dramatic enhancements of Tc are achieved by optimizing the spacer layer structure, for instance, a variety of composing elements, spacer thickness, and carrier doping levels with respect to the superconducting layers. In this respect, to realize higher-Tc superconductivity, other than Cu-oxide and Fe-based superconductors, the discovery of a new prototype of layered superconductors needs to be achieved. Here we show superconductivity in a new bismuth-oxysulfide layered compound Bi4O4S3. Crystal structure analysis indicates that this superconductor has a layered structure composed of stacking of Bi4O4(SO4)1-x and Bi2S4 layers; the parent compound (x = 0) is Bi6O8S5. Band calculation suggests that Bi4O4S3 (x = 0.5) is metallic while Bi6O8S5 (x = 0) is a band insulator with Bi3+. Furthermore, the Fermi level for Bi4O4S3 is just on the peak position of the partial density of states of the Bi 6p orbital within the BiS2 layer. The BiS2 layer is a basic structure which provides another universality class for layered superconducting family, and this opens up a new field in the physics and chemistry of low-dimensional superconductors.

cond-mat.supr-con↗

arXiv2012

Q-scan-analysis of the neutron scattering in iron-based superconductors

We propose a way to determine the pairing state of the iron pnictide superconductors exploiting the momentum (Q) scan of the neutron scattering data. We investigate the spin susceptibility in the s+- and s++ superconducting states for various doping levels using the effective five-orbital model and considering the quasiparticle damping. The peak position of the intensity shifts from the position on the line Qx = pi to that on the line Qy = 0 as the doping level is decreased from electron doping to hole doping. We find that the Q-dependence of the ratio of the intensity in the superconducting state to that in the normal state is qualitatively different between the s+- -wave and s++ -wave pairings. We propose to investigate experimentally this ratio in Q-space to distinguish the two pairing states.

cond-mat.supr-con↗

arXiv2012

Least momentum space frustration as a condition for "high $T_c$ sweet spot" in the iron-based superconductors

In the present paper, we describe how the band structure and the Fermi surface of the iron-based superconductors vary as the Fe-As-Fe bond angle changes. We discuss how these Fermi surface configurations affect the superconductivity mediated by spin fluctuations, and show that in several situations, frustration in the sign of the gap function arises due to the repulsive pairing interactions that requires sign change of the order parameter. Such a frustration can result in nodes or very small gaps, and generally works destructively against superconductivity. Conversely, we propose that the optimal condition for superconductivity is realized for the Fermi surface configuration that gives the least frustration while maximizing the Fermi surface multiplicity. This is realized when there are three hole Fermi surfaces, where two of them have $d_{XZ/YZ}$ orbital character and one has $d_{X^2-Y^2}$ {\it for all $k_z$} in the three dimensional Brillouin zone. Looking at the band structures of various iron-based superconductors, the occurrence of such a "sweet spot" situation is limited to a narrow window.

cond-mat.supr-con↗