arXiv subjects

Kazuyuki Fujita

Publications and source records attributed to Kazuyuki Fujita.

10 recordsLinked to original sources

arXiv2026

Switched Reading: Toward Seamless Visual-Auditory Switching When Reading Text in Augmented/Mixed Reality

Augmented/mixed reality (AR/MR) wearable glasses now permit information interaction anywhere, but visual displays can be inappropriate when real-world awareness is essential. We propose Switched Reading, a novel interaction framework for reading text in AR/MR that supports switching between visual and auditory modalities as needed. Specifically, we explore two key interaction techniques within this framework: (1) gaze-based voice playback and (2) a correspondence-aware transition effect. We implemented them on an MR headset through a parameter-tuning user test. Next, we conducted a user study (N=16) to investigate the impact of the two techniques on reading performance and overall user experience with simulated modality switching in virtual reality. The results show that the condition combining both techniques was the most preferred among four conditions. Moreover, we found that the gaze-based voice playback reduced gaze offsets when switching modalities and improved reading speed over the baseline condition using scroll position. Finally, we implemented a Switched Reading application for reading while walking and collected user feedback, yielding further design implications for practical use.

cs.HC↗

arXiv2026

FINER: development of the wideband millimeter-wave receiver system and preparations for first light on the Large Millimeter Telescope

The recent discovery of an excess of luminous galaxies in the early Universe necessitates sensitive and wideband millimeter spectroscopy to understand their rapid growth. To address this, we present the development of the Far-Infrared Nebular Emission Receiver (FINER) for the Large Millimeter Telescope (LMT). The FINER frontend comprises two receivers covering 120-350 GHz (corresponding to ALMA Bands 4+5 and 6+7). The warm optics are designed to enable simultaneous two-band observations. Combined with the 10.24-GHz-wide digital spectrometer array, the system aims to deliver an instantaneous bandwidth approximately five times wider than current ALMA capabilities. We report that the 210-350 GHz receiver has already achieved commissioning-level performance, with sideband rejection further enhanced by the digital sideband separation technique. With installation expected in 2026, we discuss parallel preparations, including integrated testing and commissioning plans for first-look targets.

astro-ph.IM↗

arXiv2026

GLTCAM: Concept of Multi-color Millimeter and Submillimeter Camera for the Greenland Telescope

To investigate the formation history of large-scale structure through the dynamics of galaxy clusters, we are developing a multi-color millimeter and submillimeter-wave continuum camera (GLTCAM) for deployment on the Green-land Telescope (GLT). GLTCAM will observe in six frequency bands - three in the millimeter range (150, 220, and 270 GHz) and three in the submillimeter range (350, 400, and 670 GHz). The optical design provides a compact configuration that fits within the GLT receiver cabin, while delivering diffraction-limited performance over an $18'$ field of view with minimal telecentricity error and distortion. A key advantage of this design is its uniform illumination footprint at the cold stop, which helps minimize thermal loading on both the detectors and the cryogenic stages. The focal plane module comprises a quasi-optical bandpass filter, a conical horn array coupled with planar ortho mode transducers (OMTs), and a superconducting multi-color microwave kinetic inductance detector (MKID) array. Current development efforts are focused on the three-color millimeter-wave module. The detector array employs a single-layer coplanar waveguide (CPW) architecture, which simplifies fabrication and enables scalability to large-format arrays. GLTCAM aims for the early realization of next-generation wide-field, multi-color observations as a pathfinder for future large submillimeter telescopes.

astro-ph.IM↗

arXiv2024

FINER: Far-Infrared Nebular Emission Receiver for the Large Millimeter Telescope

Unveiling the emergence and prevalence of massive/bright galaxies during the epoch of reionization and beyond, within the first 600 million years of the Universe, stands as a pivotal pursuit in astronomy. Remarkable progress has been made by JWST in identifying an immense population of bright galaxies, which hints at exceptionally efficient galaxy assembly processes. However, the underlying physical mechanisms propelling their rapid growth remain unclear. With this in mind, millimeter and submillimeter-wave spectroscopic observations of redshifted far-infrared spectral lines, particularly the [O III] 88 micron and [C II] 158 micron lines, offers a crucial pathway to address this fundamental query. To this end, we develop a dual-polarization sideband-separating superconductor-insulator-superconductor (SIS) mixer receiver, FINER, for the Large Millimeter Telescope (LMT) situated in Mexico. Harnessing advancements from ALMA's wideband sensitivity upgrade (WSU) technology, FINER covers radio frequencies spanning 120-360 GHz, delivering an instantaneous intermediate frequency (IF) of 3-21 GHz per sideband per polarization, which is followed by a set of 10.24 GHz-wide digital spectrometers. At 40% of ALMA's light-collecting area, the LMT's similar atmospheric transmittance and FINER's 5 times wider bandwidth compared to ALMA culminate in an unparalleled spectral scanning capability in the northern hemisphere, paving the way for finer spectral-resolution detection of distant galaxies.

astro-ph.IM↗

arXiv2022

DESHIMA 2.0: development of an integrated superconducting spectrometer for science-grade astronomical observations

Integrated superconducting spectrometer (ISS) technology will enable ultra-wideband, integral-field spectroscopy for (sub)millimeter-wave astronomy, in particular, for uncovering the dust-obscured cosmic star formation and galaxy evolution over cosmic time. Here we present the development of DESHIMA 2.0, an ISS for ultra-wideband spectroscopy toward high-redshift galaxies. DESHIMA 2.0 is designed to observe the 220-440 GHz band in a single shot, corresponding to a redshift range of $z$=3.3-7.6 for the ionized carbon emission ([C II] 158 $μ$m). The first-light experiment of DESHIMA 1.0, using the 332-377 GHz band, has shown an excellent agreement among the on-sky measurements, the lab measurements, and the design. As a successor to DESHIMA 1.0, we plan the commissioning and the scientific observation campaign of DESHIMA 2.0 on the ASTE 10-m telescope in 2023. Ongoing upgrades for the full octave-bandwidth system include the wideband 347-channel chip design and the wideband quasi-optical system. For efficient measurements, we also develop the observation strategy using the mechanical fast sky-position chopper and the sky-noise removal technique based on a novel data-scientific approach. In the paper, we show the recent status of the upgrades and the plans for the scientific observation campaign.

astro-ph.IM↗

arXiv2022

Material properties of a low contraction and resistivity silicon-aluminum composite for cryogenic detectors

We report on the cryogenic properties of a low-contraction silicon-aluminum composite, namely Japan Fine Ceramics SA001, to use as a packaging structure for cryogenic silicon devices. SA001 is a silicon--aluminum composite material (75% silicon by volume) and has a low thermal expansion coefficient ($\sim$1/3 that of aluminum). The superconducting transition temperature of SA001 is measured to be 1.18 K, which is in agreement with that of pure aluminum, and is thus available as a superconducting magnetic shield material. The residual resistivity of SA001 is 0.065 $\mathrm{μΩm}$, which is considerably lower than an equivalent silicon--aluminum composite material. The measured thermal contraction of SA001 immersed in liquid nitrogen is $\frac{L_{293\mathrm{K}}-L_{77\mathrm{K}}}{L_{293\mathrm{K}}}=0.12$%, which is consistent with the expected rate obtained from the volume-weighted mean of the contractions of silicon and aluminum. The machinability of SA001 is also confirmed with a demonstrated fabrication of a conical feedhorn array, with a wall thickness of 100 $\mathrm{μm}$. These properties are suitable for packaging applications for large-format superconducting detector devices.

astro-ph.IM↗

arXiv2021

Transmission Electron Microscopy Study of the Morphology of Ices Composed of H2O, CO2, and CO on Refractory Grains

It has been implicitly assumed that ices on grains in molecular clouds and proto planetary disks are formed by homogeneous layers regardless of their composition or crystallinity. To verify this assumption, we observed the H2O deposition onto refractory substrates and the crystallization of amorphous ices (H2O, CO2, and CO) using an ultra-high-vacuum transmission electron microscope. In the H2O-deposition experiments, we found that three-dimensional islands of crystalline ice (Ic) were formed at temperatures above 130 K. The crystallization experiments showed that uniform thin films of amorphous CO and H2O became three-dimensional islands of polyhedral crystals; amorphous CO2, on the other hand, became a thin film of nano crystalline CO2 covering the amorphous H2O. Our observations show that crystal morphologies strongly depend not only on the ice composition, but also on the substrate. Using experimental data concerning the crystallinity of deposited ices and the crystallization timescale of amorphous ices, we illustrated the criteria for ice crystallinity in space and outlined the macroscopic morphology of icy grains in molecular clouds as follows: amorphous H2O covered the refractory grain uniformly, CO2 nano-crystals were embedded in the amorphous H2O, and a polyhedral CO crystal was attached to the amorphous H2O. Furthermore, a change in the grain morphology in a proto-planetary disk is shown. These results have important implications for the chemical evolution of molecules, non-thermal desorption, collision of icy grains, and sintering.

astro-ph.GA↗

arXiv2020

DESHIMA on ASTE: On-sky Responsivity Calibration of the Integrated Superconducting Spectrometer

We are developing an ultra-wideband spectroscopic instrument, DESHIMA (DEep Spectroscopic HIgh-redshift MApper), based on the technologies of an on-chip filter-bank and Microwave Kinetic Inductance Detector (MKID) to investigate dusty star-burst galaxies in the distant universe at millimeter and submillimeter wavelength. An on-site experiment of DESHIMA was performed using the ASTE 10-m telescope. We established a responsivity model that converts frequency responses of the MKIDs to line-of-sight brightness temperature. We estimated two parameters of the responsivity model using a set of skydip data taken under various precipitable water vapor (PWV, 0.4-3.0 mm) conditions for each MKID. The line-of-sight brightness temperature of sky is estimated using an atmospheric transmission model and the PWVs. As a result, we obtain an average temperature calibration uncertainty of $1σ=4$%, which is smaller than other photometric biases. In addition, the average forward efficiency of 0.88 in our responsivity model is consistent with the value expected from the geometrical support structure of the telescope. We also estimate line-of-sight PWVs of each skydip observation using the frequency response of MKIDs, and confirm the consistency with PWVs reported by the Atacama Large Millimeter/submillimeter Array.

astro-ph.IM↗

arXiv2019

First light demonstration of the integrated superconducting spectrometer

Ultra-wideband 3D imaging spectrometry in the millimeter-submillimeter (mm-submm) band is an essential tool for uncovering the dust-enshrouded portion of the cosmic history of star formation and galaxy evolution. However, it is challenging to scale up conventional coherent heterodyne receivers or free-space diffraction techniques to sufficient bandwidths ($\geq$1 octave) and numbers of spatial pixels (>$10^2$). Here we present the design and first astronomical spectra of an intrinsically scalable, integrated superconducting spectrometer, which covers 332-377 GHz with a spectral resolution of $F/ΔF \sim 380$. It combines the multiplexing advantage of microwave kinetic inductance detectors (MKIDs) with planar superconducting filters for dispersing the signal in a single, small superconducting integrated circuit. We demonstrate the two key applications for an instrument of this type: as an efficient redshift machine, and as a fast multi-line spectral mapper of extended areas. The line detection sensitivity is in excellent agreement with the instrument design and laboratory performance, reaching the atmospheric foreground photon noise limit on sky. The design can be scaled to bandwidths in excess of an octave, spectral resolution up to a few thousand and frequencies up to $\sim$1.1 THz. The miniature chip footprint of a few $\mathrm{cm^2}$ allows for compact multi-pixel spectral imagers, which would enable spectroscopic direct imaging and large volume spectroscopic surveys that are several orders of magnitude faster than what is currently possible.

astro-ph.IM↗

arXiv2017

Evolution of Morphological and Physical Properties of Laboratory Interstellar Organic Residues with Ultraviolet Irradiation

Refractory organic compounds formed in molecular clouds are among the building blocks of the solar system objects and could be the precursors of organic matter found in primitive meteorites and cometary materials. However, little is known about the evolutionary pathways of molecular cloud organics from dense molecular clouds to planetary systems. In this study, we focus on the evolution of the morphological and viscoelastic properties of molecular cloud refractory organic matter. We found that the organic residue, experimentally synthesized at about 10 K from UV-irradiated H2O-CH3OH-NH3 ice, changed significantly in terms of its nanometer- to micrometer-scale morphology and viscoelastic properties after UV irradiation at room temperature. The dose of this irradiation was equivalent to that experienced after short residence in diffuse clouds (equal or less than 10,000 years) or irradiation in outer protoplanetary disks. The irradiated organic residues became highly porous and more rigid and formed amorphous nanospherules. These nanospherules are morphologically similar to organic nanoglobules observed in the least-altered chondrites, chondritic porous interplanetary dust particles, and cometary samples, suggesting that irradiation of refractory organics could be a possible formation pathway for such nanoglobules. The storage modulus (elasticity) of photo-irradiated organic residues is about 100 MPa irrespective of vibrational frequency, a value that is lower than the storage moduli of minerals and ice. Dust grains coated with such irradiated organics would therefore stick together efficiently, but growth to larger grains might be suppressed due to an increase in aggregate brittleness caused by the strong connections between grains.

astro-ph.EP↗