arXiv subjects

Keh-Fei Liu

Publications and source records attributed to Keh-Fei Liu.

At least 109 records · Page 6Linked to original sources

arXiv2010

Nucleon strangeness form factors and moments of PDF

The calculation of the nucleon strangeness form factors from N_f=2+1 clover fermion lattice QCD is presented. Disconnected insertions are evaluated using the Z(4) stochastic method, along with unbiased subtractions from the hopping parameter expansion. We find that increasing the number of nucleon sources for each configuration improves the signal significantly. We obtain G_M^s(0) = -0.017(25)(07), which is consistent with experimental values, and has an order of magnitude smaller error. Preliminary results for the strangeness contribution to the second moment of the parton distribution function are also presented.

hep-lat↗

arXiv2010

Finite density phase transition of QCD with $N_f=4$ and $N_f=2$ using canonical ensemble method

In a progress toward searching for the QCD critical point, we study the finite density phase transition of $N_f = 4$ and 2 lattice QCD at finite temperature with the canonical ensemble approach. We develop a winding number expansion method to accurately project out the particle number from the fermion determinant which greatly extends the applicable range of baryon number sectors to make the study feasible. Our lattice simulation was carried out with the clover fermions and improved gauge action. For a given temperature, we calculate the baryon chemical potential from the canonical approach to look for the mixed phase as a signal for the first order phase transition. In the case of $N_f=4$, we observe an "S-shape" structure in the chemical potential-density plane due to the surface tension of the mixed phase in a finite volume which is a signal for the first order phase transition. We use the Maxwell construction to determine the phase boundaries for three temperatures below $T_c$. The intersecting point of the two extrapolated boundaries turns out to be at the expected first order transition point at $T_c$ with $μ= 0$. This serves as a check for our method of identifying the critical point. We also studied the $N_f =2$ case, but do not see a signal of the mixed phase for temperature as low as 0.83 $T_c$.

hep-lat↗

arXiv2009

Nucleon strangeness form factors from N_f=2+1 clover fermion lattice QCD

We present the N_f=2+1 clover fermion lattice QCD calculation of the nucleon strangeness form factors. We evaluate disconnected insertions using the Z(4) stochastic method, along with unbiased subtractions from the hopping parameter expansion. We find that increasing the number of nucleon sources for each configuration improves the signal significantly. We obtain G_M^s(0) = -0.017(25)(07), where the first error is statistical, and the second is the uncertainties in Q^2 and chiral extrapolations. This is consistent with experimental values, and has an order of magnitude smaller error.

hep-ph↗

arXiv2009

The calculation of nucleon strangeness form factors from N_f=2+1 clover fermion lattice QCD

We study the strangeness electromagnetic form factors of the nucleon from the N_f=2+1 clover fermion lattice QCD calculation. The disconnected insertions are evaluated using the Z(4) stochastic method, along with unbiased subtractions from the hopping parameter expansion. In addition to increasing the number of Z(4) noises, we find that increasing the number of nucleon sources for each configuration improves the signal significantly. We obtain G_M^s(0) = -0.017(25)(07), where the first error is statistical, and the second is the uncertainties in Q^2 and chiral extrapolations. This is consistent with experimental values, and has an order of magnitude smaller error. We also study the strangeness second moment of the partion distribution function of the nucleon, _{s-\bar{s}}.

hep-lat↗

arXiv2009

Study of QCD critical point using canonical ensemble method

The existence of the QCD critical point at non-zero baryon density is not only of great interest for experimental physics but also a challenge for the theory. We use lattice simulations based on the canonical ensemble method to explore the finite baryon density region and look for the critical point. We scan the phase diagram of QCD with three degenerate quark flavors using clover fermions with $m_π\approx 700{MeV}$ on $6^3\times4$ lattices. We measure the baryon chemical potential as we increase the density and we see the characteristic "S-shape" that signals the first order phase transition. We determine the phase boundary by Maxwell construction and report our preliminary results for the location of critical point.

hep-lat↗

arXiv2009

Neutron Electric Dipole Moment at Fixed Topology

We describe the finite volume effects of CP-odd quantities, such as the neutron electric dipole moment and the anapole moment in the $θ$-vacuum, under different topological sectors. We evaluate the three-point Green's functions for the electromagnetic current in a fixed non-trivial topological sector in order to extract these CP-odd observables. We discuss the role of zero modes in the CP-odd Green's function and show that, in the quenched approximation, there is a power divergence in the quark mass for CP-odd quantities at finite volume.

hep-ph↗

arXiv2009

Pseudoscalar glueball mass from $η$-$η'$-$G$ mixing

We deduce the mass of the pseudoscalar glueball $G$ from an $η$-$η'$-$G$ mixing formalism based on the anomalous Ward identity for transition matrix elements. With the inputs from the recent KLOE experiment, we find a solution for the pseudoscalar glueball mass around $(1.4\pm 0.1)$ GeV, which is fairly insensitive to a range of inputs with or without Okubo-Zweig-Iizuka-rule violating effects. This affirms that $η(1405)$, having a large production rate in the radiative $J/Ψ$ decay and not seen in $γγ$ reactions, is indeed a leading candidate for the pseudoscalar glueball. Other relevant quantities including the anomaly and pseudoscalar density matrix elements are obtained. The decay widths for $G\to γγ$, $\ell^+\ell^-$ are also predicted.

hep-ph↗

arXiv2008

Winding number expansion for the canonical approach to finite density simulations

The canonical partition function approach was designed to avoid the overlap problem that affects the lattice simulations of nuclear matter at high density. The method employs the projections of the quark determinant on a fix quark number sector. When the quark number is large, the evaluation of the projected determinant becomes numerically unstable. In this paper a different evaluation method based on expanding the determinant in terms of loops winding around the lattice is studied. We show that this method is stable and significantly faster than our original algorithm. This greatly expands the range of quark numbers that we can simulate effectively.

hep-lat↗

arXiv2008

Light scalar mesons in 2+1 flavor full QCD

We study the a_0 and K_0^* light scalar mesons in 2+1 flavor full QCD. Particular attention is paid to fitting excited states, with an eye toward determining whether scattering states are revealed. An ultimate goal will be to see how dynamical quarks affect the picture outlined with an earlier quenched study using overlap fermions, namely, that it is the a_0(1450), not the a_0(980), which is the lowest $\bar{q}q$ isovector scalar state.

hep-lat↗

arXiv2008

2+1 flavor QCD calculation of and

We calculate the connected insertions of the nucleon three-point function to study the first few moments of the unpolarized structure functions of the nucleon. (The disconnected insertions are discussed elsewhere in these proceedings). The calculation employs the CP-PACS/JLQCD 2+1 dynamical clover fermions on a 16^3x32 lattice with lattice spacing a=0.1219 fm. The sequential source technique, using non-zero and zero momentum point nucleon field as the secondary source, is applied enabling a study of different currents at various momentum transfer.

hep-lat↗

arXiv2008

Finite Density Simulations with Canonical Ensemble

QCD at non-zero baryon density is expected to have a critical point where the zero-density cross-over turns into a first order phase transition. To identify this point we scan the density-temperature space using a canonical ensemble method. For a given temperature, we plot the chemical potential as a function of density looking for an "S-shape" as a signal for a first order transition. We carried out simulations using Wilson fermions with $m_π\approx 1{GeV}$ on $6^3\times 4$ lattices. As a benchmark, we ran four flavors simulations where we observe a clear signal. In the two flavors case we do not see any signal for temperatures as low as $0.83 T_c$. Preliminary results for the three flavor case are also presented.

hep-lat↗

arXiv2008

Strangeness and glue in the nucleon from lattice QCD

We study the strangeness contribution to nucleon matrix elements using Nf=2+1 dynamical clover fermion configurations generated by the CP-PACS/JLQCD collaboration. In order to evaluate the disconnected insertion (DI), we use the Z(4) stochastic method, along with unbiased subtraction from the hopping parameter expansion which reduces the off-diagonal noises in the stochastic method. Furthermore, we find that using many nucleon sources for each configuration is effective in improving the signal. Our results for the quark contribution to the first moment _q in the DI, and the strangeness magnetic moment show that the statistical errors are under control with these techniques. We also study the gluonic contribution to the nucleon using the overlap operator to construct the gauge field tensor, F_{mu,nu}. The application to the calculation of first moment, _G, gives a good signal in quenched lattice QCD.

hep-lat↗

arXiv2008

Classical Limits of Scalar and Tensor Gauge Operators Based on the Overlap Dirac Matrix

It was recently proposed by the second author to consider lattice formulations of QCD in which complete actions, including the gauge part, are built explicitly from a given Dirac operator D. In a simple example of such theory, the gauge action is proportional to the trace of Ginsparg-Wilson operator D chosen to define the quark dynamics. This construction relies on the proposition that the classical limit of lattice gauge operator tr D(x,x) is proportional to tr F.F(x) (up to an additive constant). Here we show this for the case of the overlap Dirac operator using both analytical and numerical methods. We carry out the same analysis also for the tensor component of D, which is similarly related to the field-strength tensor F, and obtain results identical to our previous derivation that used different approach. The corresponding proportionality constants are computed to high precision for wide range of the negative mass parameter values, and it is verified that they are the same in finite and infinite volumes.

hep-lat↗

arXiv2008

Challenges of Lattice Calculation of Scalar Mesons

I review a proposed pattern of the light scalar mesons with q\bar{q} mesons and glueball above 1 GeV and tetraquark mesoniums below 1 GeV. Several challenges and caveats of calculating these light scalar mesons with dynamical fermions are discussed.

hep-lat↗

arXiv2007

Finite density simulations using a determinant estimator

Previous investigations have shown that the canonical approach to simulating QCD at finite density is promising. The algorithm we used in our earlier work employs an exact calculation of the fermionic determinant which limits the size of the lattices we can simulate. Interesting questions can only be answered if we simulate at larger volume. In this paper we explore an algorithm, Hybrid Noisy Monte Carlo, that employs a determinant estimator rather than an exact calculation. We first present the technical aspects of the estimator, check that the algorithm is correct by comparing it with our previous study, and then discuss its merits. We will also discuss the challenges faced when simulating larger lattice volumes.

hep-lat↗

arXiv2007

New results using the canonical approach to finite density QCD

We present some new results regarding simulations of finite density QCD based on a canonical approach. A previous study has shown that such simulations are feasible, at least on small lattices. In the current study, we investigate some of the issues left open: we study the errors introduced by our approximation of the action and we show how to tune it to reduce the cost of the simulations while keeping the errors under control. To further reduce the cost of the simulations, we check the reliability of reweighting method with respect to the baryon number. Finally, using these optimizations, we carry out the simulations at larger densities than in our previous study to look for signals of a phase transition.

hep-lat↗

arXiv2007

Pattern of Light Scalar Mesons

Combining the recent lattice calculation of $a_0(1450)$ and $σ(600)$ mesons with the overlap fermion in the chiral regime with the pion mass less than $300 {\rm MeV}$, the quenched lattice calculation of the scalar glueball, and the phenomenological study of the mixing of isoscalar scalar mesons $f_0(1710)$, $f_0(1500)$, $f_0(1370)$ through their decays, a simple pattern for the light scalar mesons begins to emerge. Below 1 GeV, the scalar mesons form a nonet of tetraquark mesoniums. Above 1 GeV, the nonent $q\bar{q}$ mesons are made of an octet with largely unbroken SU(3) symmetry and a fairly good singlet which is $f_0(1370)$. $f_0(1710)$ is identified as an almost pure scalar glueball with a $\sim 10%$ mixture of $q\bar{q}$.

hep-ph↗

arXiv2006

Reweighting method in finite density lattice QCD

Finite density simulations require dynamical fermions which are computationally demanding. We employ Ferrenberg and Swendsen reweighting method to reduce the number of ensembles needed. We use their method to do a combined reweighting in both $β$ and quark number $k$ on an ensemble generated by the Kentucky group.

hep-lat↗