arXiv subjects

Kehui Wu

Publications and source records attributed to Kehui Wu.

At least 37 records · Page 2Linked to original sources

arXiv2020

Observation of quantum spin Hall states in Ta$_2$Pd$_3$Te$_5$

Two-dimensional topological insulators (2DTIs), which host the quantum spin Hall (QSH) effect, are one of the key materials in next-generation spintronic devices. To date, experimental evidence of the QSH effect has only been observed in a few materials, and thus, the search for new 2DTIs is at the forefront of physical and materials science. Here, we report experimental evidence of a 2DTI in the van der Waals material Ta$_2$Pd$_3$Te$_5$. First-principles calculations show that each monolayer of Ta$_2$Pd$_3$Te$_5$ is a 2DTI with weak interlayer interactions. Combined transport, angle-resolved photoemission spectroscopy, and scanning tunneling microscopy measurements confirm the existence of a band gap at the Fermi level and topological edge states inside the gap. These results demonstrate that Ta$_2$Pd$_3$Te$_5$ is a promising material for fabricating spintronic devices based on the QSH effect.

cond-mat.mtrl-sci↗

arXiv2020

Experimental observation of Dirac cones in artificial graphene lattices

Artificial lattices provide a tunable platform to realize exotic quantum devices. A well-known example is artificial graphene (AG), in which electrons are confined in honeycomb lattices and behave as massless Dirac fermions. Recently, AG systems have been constructed by manipulating molecules using scanning tunnelling microscope tips, but the nanoscale size typical for these constructed systems are impossible for practical device applications and insufficient for direct investigation of the electronic structures using angle-resolved photoemission spectroscopy (ARPES). Here, we demonstrate the synthesis of macroscopic AG by self-assembly of C$_{60}$ molecules on metal surfaces. Our theoretical calculations and ARPES measurements directly confirm the existence of Dirac cones at the $K$ ($K^\prime$) points of the Brillouin zone (BZ), in analogy to natural graphene. These results will stimulate ongoing efforts to explore the exotic properties in artificial lattices and provide an important step forward in the realization of novel molecular quantum devices.

cond-mat.mtrl-sci↗

arXiv2020

Superconductivity and Fermi Surface Nesting in the Candidate Dirac Semimetal NbC

We report the synthesis of single-crystal NbC, a transition metal carbide with various unusual properties. Transport, magnetic susceptibility, and specific heat measurements demonstrate that NbC is a conventional superconductor with a superconducting transition temperature ($T_c$) of 11.5 K. Our theoretical calculations show that NbC is a type-II Dirac semimetal with strong Fermi surface nesting, which is supported by our ARPES measurement results. We also observed the superconducting gaps of NbC using angle-resolved photoemission spectroscopy (ARPES) and found some unconventional behaviors. These intriguing superconducting and topological properties, combined with the high corrosion resistance, make NbC an ideal platform for both fundamental research and device applications.

cond-mat.supr-con↗

arXiv2020

Topological electronic structure in the antiferromagnet HoSbTe

Magnetic topological materials, in which the time-reversal symmetry is broken, host various exotic quantum phenomena, including the quantum anomalous Hall effect, axion insulator states, and Majorana fermions. The study of magnetic topological materials is at the forefront of condensed matter physics. Recently, a variety of magnetic topological materials have been reported, such as Mn$_3$Sn, Co$_3$Sn$_2$S$_2$, Fe$_3$Sn$_2$, and MnBi$_2$Te$_4$. Here, we report the observation of a topological electronic structure in an antiferromagnet, HoSbTe, a member of the ZrSiS family of materials, by angle-resolved photoemission spectroscopy measurements and first-principles calculations. We demonstrate that HoSbTe is a Dirac nodal line semimetal when spin-orbit coupling (SOC) is neglected. However, our theoretical calculations show that the strong SOC in HoSbTe fully gaps out the nodal lines and drives the system to a weak topological insulator state, with each layer being a two-dimensional topological insulator. Because of the strong SOC in HoSbTe, the gap is as large as hundreds of meV along specific directions, which is directly observed by our ARPES measurements. The existence of magnetic order and topological properties in HoSbTe makes it a promising material for realization of exotic quantum devices.

cond-mat.mtrl-sci↗

arXiv2020

Experimental evidence of monolayer AlB$_2$ with symmetry-protected Dirac cones

Monolayer AlB$_2$ is composed of two atomic layers: honeycomb borophene and triangular aluminum. In contrast with the bulk phase, monolayer AlB$_2$ is predicted to be a superconductor with a high critical temperature. Here, we demonstrate that monolayer AlB$_2$ can be synthesized on Al(111) via molecular beam epitaxy. Our theoretical calculations revealed that the monolayer AlB$_2$ hosts several Dirac cones along the $Γ$--M and $Γ$--K directions; these Dirac cones are protected by crystal symmetries and are thus resistant to external perturbations. The extraordinary electronic structure of the monolayer AlB$_2$ was confirmed via angle-resolved photoemission spectroscopy measurements. These results are likely to stimulate further research interest to explore the exotic properties arising from the interplay of Dirac fermions and superconductivity in two-dimensional materials.

cond-mat.mtrl-sci↗

arXiv2020

Robust Gapless Surface State against Surface Magnetic Impurities on (Bi$_{0.5}$Sb$_{0.5}$)$_2$Te$_3$ Evidenced by In Situ Magnetotransport Measurements

Despite extensive experimental and theoretical efforts, the important issue of the effects of surface magnetic impurities on the topological surface state of a topological insulator (TI) remains unresolved. We elucidate the effects of Cr impurities on epitaxial thin films of (Bi$_{0.5}$Sb$_{0.5}$)$_{2}$Te$_{3}$: Cr adatoms are incrementally deposited onto the TI held in ultrahigh vacuum at low temperatures, and \textit{in situ} magnetoconductivity and Hall effect measurements are performed at each increment with electrostatic gating. In the experimentally identified surface transport regime, the measured minimum electron density shows a non-monotonic evolution with the Cr density ($n_{\mathrm{Cr}}$): it first increases and then decreases with $n_{\mathrm{Cr}}$. This unusual behavior is ascribed to the dual roles of the Cr as ionized impurities and electron donors, having competing effects of enhancing and decreasing the electronic inhomogeneities in the surface state at low and high $n_{\mathrm{Cr}}$ respectively. The magnetoconductivity is obtained for different $n_{\mathrm{Cr}}$ on one and the same sample, which yields clear evidence that the weak antilocalization effect persists and the surface state remains gapless up to the highest $n_{\mathrm{Cr}}$, contrary to the expectation that the deposited Cr should break the time reversal symmetry and induce a gap opening at the Dirac point.

cond-mat.mes-hall↗

arXiv2019

One Dimensional Nearly Free Electron States in Borophene

Two-dimensional boron (borophene) is featured by its structural polymorphs and distinct in-plane anisotropy, opening opportunities to achieve tailored electronic properties by intermixing different phases. Here, using scanning tunneling spectroscopy combined with first-principles calculations, delocalized one-dimensional nearly free electron states (NFE) in the (2,3) or \b{eta}12 borophene sheet on the Ag(111) surface were observed. The NFE states emerge from a line defect in the borophene, manifested as a structural unit of the (2,2) or \c{hi}3 sheet, which creates an in-plane potential well that shifts the states toward the Fermi level. The NFE states are held in the 2D plane of borophene, rather than in the vacuum region as observed in other nanostructures. Furthermore the borophene can provide a rare prototype to further study novel NFE behaviors, which may have potential applications on transport or field emission nanodevices based on boron.

cond-mat.mtrl-sci↗

arXiv2018

Switchable quantized conductance in topological insulators revealed by the Shockley-Ramo theorem

Crystals with symmetry-protected topological order, such as topological insulators, promise coherent spin and charge transport phenomena even in the presence of disorder at room temperature. Still, a major obstacle towards an application of topological surface states in integrated circuits is a clear, reliable, and straightforward read-out independent of a prevailing charge carrier density in the bulk. Here, we demonstrate how to image and read-out the local conductance of helical surface modes in the prototypical topological insulators Bi2Se3 and BiSbTe3. We apply the so-called Shockley-Ramo theorem to design an optoelectronic probe circuit for the gapless surface states, and surprisingly find a precise conductance quantization at 1e2/h. The unprecedented response is a clear signature of local spin-polarized transport, and it can be switched on and off via an electrostatic field effect. The macroscopic, global read-out scheme is based on the displacement current resistivity, and it does not require coherent transport between electrodes.6 It provides a generalizable platform for studying further non-trivial gapless systems such as Weyl-semimetals and quantum spin-Hall insulators.

cond-mat.mes-hall↗

arXiv2017

Experimental realization of graphene-like borophene

We report a successful preparation of a purely honeycomb, graphene-like borophene, by using an Al(111) surface as the substrate and molecular beam epitaxy (MBE) growth in ultrahigh vacuum. Our scanning tunneling microscopy (STM) reveals perfect monolayer borophene with planar, non-buckled honeycomb lattice similar as graphene. Theoretical calculations show that the honeycomb borophene on Al(111) is energetically stable. Remarkably, nearly one electron charge is transferred to each boron atom from the Al(111) substrate and stabilizes the honeycomb borophene structure, in contrast to the little charge transfer in borophene/Ag(111) case. This work demonstrates that the borophene lattice can be manipulated by controlling the charge transfer between the substrate and the borophene film.

cond-mat.mes-hall↗

arXiv2017

Direct evidences of pentagonal silicon chains and magic clusters

Pentagon is one of the most beautiful geometric structures in nature, but it is rarely seen simply because five-fold symmetry is mathematically forbidden in a 2D or 3D periodic lattices. Fortunately, pentagon as a structural element is allowed in 1D or 0D systems, since translational symmetry is not necessary there. However, in these systems pentagons only compose a small portion of the structure. So far, 1D or 0D systems consisting of purely pentagons are still rare. Here, combing high resolution non-contact atomic force microscopy and tip-enhanced Raman spectroscopy, we have directly visualized the pentagon-ring structure in self-assembled Si nanoribbons and magic clusters on Ag(110) substrate. Moreover, chemical fingerprint of Si pentagon was detected in individual Si nanoribbon and clusters by tip-enhanced Raman spectroscopy. This work demonstrates that Si pentagon can be an important element in building silicon nanostructures, which may find potential applications in future nanoelectronics based on silicon.

cond-mat.mes-hall↗

arXiv2017

Discovery of two-dimensional Dirac nodal line fermions in monolayer Cu2Si

Topological nodal line semimetals, a novel quantum state of materials, possess topologically nontrivial valence and conduction bands that touch at a line near the Fermi level. The exotic band structure can lead to various novel properties, such as long-range Coulomb interaction and flat Landau levels. Recently, topological nodal lines have been observed in several bulk materials, such as PtSn4, ZrSiS, TlTaSe2 and PbTaSe2. However, in two-dimensional materials, experimental research on nodal line fermions is still lacking. Here, we report the discovery of two-dimensional Dirac nodal line fermions in monolayer Cu2Si based on combined theoretical calculations and angle-resolved photoemission spectroscopy measurements. The Dirac nodal lines in Cu2Si form two concentric loops centred around the Γ point and are protected by mirror reflection symmetry. Our results establish Cu2Si as a new platform to study the novel physical properties in two-dimensional Dirac materials and provide new opportunities to realize high-speed low-dissipation devices.

cond-mat.mtrl-sci↗

arXiv2017

Realization of Flat Band with Possible Nontrivial Topology in Electronic Kagome Lattice

The energy dispersion of fermions or bosons vanishes in momentum space if destructive quantum interference occurs in a frustrated Kagome lattice with only nearest-neighbour (NN) hopping. A discrete flat band (FB) without any dispersion is consequently formed, promising emergence of fractional quantum Hall states (FQHS) at high temperatures. Here, we report experimental realization of a FB with possible nontrivial topology in an electronic Kagome lattice on a twisted multilayer silicene. The electrons are localized in the Kagome lattice due to quantum destructive interference, and thus, their kinetic energy is quenched, which gives rise to a FB peak in density of states. A robust and pronounced one-dimensional edge state has been revealed at Kagome edge, which resides at higher energy than the FB. Our observations of the FB and the exotic edge state in electronic Kagome lattice open up the possibility towards the realization of fractional Chern insulators in two-dimensional materials.

cond-mat.mtrl-sci↗

arXiv2017

Strain-Induced Band Engineering in Monolayer Stanene on Sb(111)

Two-dimensional (2D) allotrope of tin with low buckled honeycomb structure, named as stanene, is proposed to be an ideal 2D topological insulator with a nontrivial gap larger than 0.1 eV. Theoretical works also pointed out the topological property of stanene occurs by strain tuning. In this letter, we report the successful realization of high quality, monolayer stanene film as well as monolayer stanene nanoribbons on Sb(111) surface by molecular beam epitaxy, providing an ideal platform to the study of stanene. More importantly, we observed a continuous evolution of the electronic bands of stanene across a nanoribbon, which are related to the strain field gradient in stanene. Our work experimentally confirmed that strain is an effective method for band engineering in stanene, which is important for fundamental research and application of stanene.

cond-mat.mtrl-sci↗

arXiv2017

Synthesis of Borophene Nanoribbons on Ag(110) Surface

We present the successful synthesis of single-atom-thick borophene nanoribbons (BNRs) by self-assembly of boron on Ag(110) surface. The scanning tunneling microscopy (STM) studies reveal high quality BNRs: all the ribbons are along the [-110] direction of Ag(110), and can run across the steps on the surface. The width of ribbons is distributed in a narrow range around 10.3 nm. High resolution STM images revealed four ordered surface structures in BNRs. Combined with DFT calculations, we found that all the four structures of boron nanoribbons consist of the boron chains with different width, separated by hexagonal hole arrays. The successful synthesis of BNRs enriches the low dimensional allotrope of boron and may promote further applications of borophene

cond-mat.mtrl-sci↗

arXiv2017

Dirac fermions in borophene

Honeycomb structures of group IV elements can host massless Dirac fermions with non-trivial Berry phases. Their potential for electronic applications has attracted great interest and spurred a broad search for new Dirac materials especially in monolayer structures. We present a detailed investigation of the β12 boron sheet, which is a borophene structure that can form spontaneously on a Ag(111) surface. Our tight-binding analysis revealed that the lattice of the β12-sheet could be decomposed into two triangular sublattices in a way similar to that for a honeycomb lattice, thereby hosting Dirac cones. Furthermore, each Dirac cone could be split by introducing periodic perturbations representing overlayer-substrate interactions. These unusual electronic structures were confirmed by angle-resolved photoemission spectroscopy and validated by first-principles calculations. Our results suggest monolayer boron as a new platform for realizing novel high-speed low-dissipation devices.

cond-mat.mtrl-sci↗

arXiv2016

Direct Evidence of Metallic Bands in a Monolayer Boron Sheet

The search for metallic boron allotropes has attracted great attention in the past decades and recent theoretical works predict the existence of metallicity in monolayer boron. Here, we synthesize the \b{eta}12-sheet monolayer boron on a Ag(111) surface and confirm the presence of metallic boron-derived bands using angle-resolved photoemission spectroscopy. The Fermi surface is composed of one electron pocket at the S point and a pair of hole pockets near the X point, which is supported by the first-principles calculations. The metallic boron allotrope in \b{eta}12 sheet opens the way to novel physics and chemistry in material science.

cond-mat.mtrl-sci↗

arXiv2015

Point defects in epitaxial silicene on Ag(111) surface

Silicene, a counterpart of graphene, has achieved rapid development due to its exotic electronic properties and excellent compatibility with the mature silicon-based semiconductor technology. Its low room-temperature mobility of about 100 cm2V-1s-1, however, inhibits device applications such as in field-effect transistors. Generally, defects and grain boundaries would act as scattering centers and thus reduce the carrier mobility. In this paper, the morphologies of various point defects in epitaxial silicene on Ag(111) surfaces have been systematically investigated using first-principles calculations combined with experimental scanning tunneling microscope (STM) observations. The STM signatures for various defects in epitaxial silicene on Ag(111) surface are identified. In particular, the formation energies of point defects in Ag(111)-supported silicene sheets show an interesting dependence on the superstructures, which, in turn, may have implications for controlling the defect density during the synthesis of silicene. Through estimating the concentrations of various point defects in different silicene superstructures, the mystery of the defective appearance of v13*v13 silicene in experiments is revealed, and 4*4 silicene sheet is thought to be the most suitable structure for future device applications.

cond-mat.mtrl-sci↗

arXiv2015

Experimental Realization of Two-Dimensional Boron Sheets

Boron is the fifth element in the periodic table and possesses rich chemistry second only to carbon. A striking feature of boron is that B12 icosahedral cages occur as the building blocks in bulk boron and many boron compounds. This is in contrast to its neighboring element, carbon, which prefers 2D layered structure (graphite) in its bulk form. On the other hand, boron clusters of medium size have been predicted to be planar or quasi-planar, such as B12+ , B13+, B19-, B36, and so on. This is also in contrast to carbon clusters which exhibit various cage structures (fullerenes). Therefore, boron and carbon can be viewed as a set of complementary chemical systems in their bulk and cluster structures. Now, with the boom of graphene, an intriguing question is that whether boron can also form a monoatomic-layer 2D sheet structure? Here, we report the first successful experimental realization of 2D boron sheets. We have revealed two types of boron sheet structures, corresponding to a triangular boron lattice with different arrangements of the hexagonal holes. Moreover, our boron sheets were found to be relatively stable against oxidization, and interacts only weekly with the substrate. The realization of such a long expected 2D boron sheet could open a door toward boron electronics, in analogous to the carbon electronics based on graphene.

cond-mat.mes-hall↗