arXiv subjects

Keita Yoneda

Publications and source records attributed to Keita Yoneda.

13 recordsLinked to original sources

arXiv2026

Extending Wire-Driven Parallel Robots to Multi-Floating-Link Systems with an Inter-Body Wire

Parallel wire-driven systems are a framework in which multiple wires are connected to an end effector, and the end effector is driven by the tensions of those wires. Because they can transmit large forces, up to the breaking strength of the wires, over lengths on the order of several tens of meters, they can realize powerful actuation in large workspaces. In recent years, studies have also investigated connecting wires to external environments such as trees and columns and forming parallel wire actuation on site. However, conventional parallel wire-driven systems often assume a single end effector, and because of interference between wires and links in a shared workspace, it has been difficult to handle multiple floating links simultaneously. In this study, we realize multi-floating-link parallel wire actuation by introducing an inter-body wire. In real-robot experiments, the two bodies supported and lifted a mannequin and transferred it onto a stretcher as a rescue motion. This shows that parallel wire actuation can be extended from a single end effector to a multi-floating-link system, and indicates its potential for broader tasks such as the manipulation of large objects and rescue support.

cs.RO↗

arXiv2026

Robust Brachiation on a Life-Sized Dual-Arm Robot Using Waypoint-Guided Reinforcement Learning

Brachiation is a form of locomotion in which primates move primarily using their arms, enabling traversal in environments without footholds. However, this motion requires highly coordinated whole-body movement and precise timing control for bar grasping and release. As a result, achieving robust behavior on life-sized robotic platforms remains challenging. In this study, we present a reinforcement learning-based method to realize brachiation on a life-sized dual-arm robot. The core of the proposed approach is Waypoint-Guided Reinforcement Learning (WGRL), a learning framework for inducing non-linear and complex motions. For high-difficulty tasks where imitation learning data are unavailable, WGRL guides behavior acquisition by sparsely specifying waypoints for the end-effector trajectory, while whole-body motion is generated through reinforcement learning. In addition, by integrating the waypoint-following guidance with rewards based on task success and mechanical energy, and training in an environment designed for Sim-to-Real transfer, the proposed method achieves both forward progression and motion stability. The acquired behavior is evaluated through Sim-to-Sim experiments under monkey-bar environments with geometric variations and hardware experiments, confirming robust brachiation including failure recovery behavior. This study provides effective learning design guidelines for realizing arm-based locomotion on life-sized robotic hardware and expanding the traversable workspace of robots.

cs.RO↗

arXiv2026

WARL: Wrench-Augmented Reinforcement Learning for Task-Agnostic Learning in Legged Robots

While reinforcement learning for legged robots has achieved high motor performance, it has been constrained by the limited exploration capability of actions confined to the joint space. To address this issue, this study proposes a new method, Wrench-Augmented Reinforcement Learning (WARL), which introduces a wrenche (force and torque) into the action space. The proposed method combines wrench-guided exploration with a success rate-based curriculum mechanism to expand exploration capabilities in the early stages of learning, with the ultimate goal of acquiring behaviors based solely on joint control. Experiments using a quadruped robot demonstrated that WARL can learn robustly across diverse terrains and motor tasks without requiring terrain-specific reward adjustments or complex curriculum designs. Furthermore, an ablation study verified the effectiveness of the Switching Curriculum, which gradually eliminates the wrench. On the other hand, we also show that introducing a wrench can encourage behaviors that do not sufficiently exploit the robot's physical embodiment. These findings suggest that while wrench-based exploration enhancement is effective for improving learning efficiency, designing it in a way that is consistent with the robot's physical structure is a critical future challenge.

cs.RO↗

arXiv2026

MEVION: Low-Cost Open-Source Data Collection System for Powerful and High-Speed Dual-Arm Manipulation

The global competition for developing robotic foundation models is intensifying. Among the data collection systems used for dual-arm robots, ALOHA is representative of being low-cost and open-source, and is widely adopted by researchers as a de facto standard. However, due to its limited ability to generate high forces and speeds, it is difficult to handle heavy objects or perform fast manipulations. To address this, we developed MEVION, a low-cost and open-source dual-arm robot data collection system capable of generating greater force and speed. All parts of this robot can be sourced through e-commerce, and by extensively utilizing sheet metal welding, its large body structure is constructed with a small number of components at low cost, while also simplifying assembly. MEVION is equipped with four 6-DoF arms with parallel grippers. Each arm weighs 7.0 kg and has a maximum torque of 60 Nm, and the entire system can be constructed for about USD 14,000. The elbow joint adopts a closed-link mechanism similar to those used in quadruped robots, which reduces the distal mass and enables higher force and speed output at the end-effector. We demonstrate that MEVION enables data collection for object manipulation tasks not previously possible and supports imitation learning-based motion generation. All hardware and software of this work are included in the Supplementary Materials or https://github.com/haraduka/mevion.

cs.RO↗

arXiv2026

EFGCL: Learning Dynamic Motion through Spotting-Inspired External Force Guided Curriculum Learning

Learning dynamic whole-body motions for legged robots through reinforcement learning (RL) remains challenging due to the high risk of failure, which makes efficient exploration difficult and often leads to unstable learning. In this paper, we propose External Force Guided Curriculum Learning (EFGCL), a guided RL approach based on the principle of physical guidance, in which external assistive forces are introduced during training. Inspired by spotting in artistic gymnastics, EFGCL enables agents to physically experience successful motion executions without relying on task-specific reward shaping or reference trajectories. Experiments on a quadrupedal robot performing Jump, Backflip, and Lateral-Flip tasks demonstrate that EFGCL accelerates learning of the Jump task by approximately a factor of two and enables the acquisition of complex whole body motions that conventional RL methods fail to learn. We further show that the learned policies can be deployed on real robot, reproducing motions consistent with those observed in simulation. These results indicate that physically guided exploration, which allows agents to experience success early in training, is an effective and general strategy for improving learning efficiency in dynamic whole-body motion tasks.

cs.RO↗

arXiv2026

MEVIUS2: Practical Open-Source Quadruped Robot with Sheet Metal Welding and Multimodal Perception

Various quadruped robots have been developed to date, and thanks to reinforcement learning, they are now capable of traversing diverse types of rough terrain. In parallel, there is a growing trend of releasing these robot designs as open-source, enabling researchers to freely build and modify robots themselves. However, most existing open-source quadruped robots have been designed with 3D printing in mind, resulting in structurally fragile systems that do not scale well in size, leading to the construction of relatively small robots. Although a few open-source quadruped robots constructed with metal components exist, they still tend to be small in size and lack multimodal sensors for perception, making them less practical. In this study, we developed MEVIUS2, an open-source quadruped robot with a size comparable to Boston Dynamics' Spot, whose structural components can all be ordered through e-commerce services. By leveraging sheet metal welding and metal machining, we achieved a large, highly durable body structure while reducing the number of individual parts. Furthermore, by integrating sensors such as LiDARs and a high dynamic range camera, the robot is capable of detailed perception of its surroundings, making it more practical than previous open-source quadruped robots. We experimentally validated that MEVIUS2 can traverse various types of rough terrain and demonstrated its environmental perception capabilities. All hardware, software, and training environments can be obtained from Supplementary Materials or https://github.com/haraduka/mevius2.

cs.RO↗

arXiv2026

Analysis of Various Manipulator Configurations Based on Multi-Objective Black-Box Optimization

Various 6-degree-of-freedom (DOF) and 7-DOF manipulators have been developed to date. Over a long history, their joint configurations and link length ratios have been determined empirically. In recent years, the development of robotic foundation models has become increasingly active, leading to the continuous proposal of various manipulators to support these models. However, none of these manipulators share exactly the same structure, as the order of joints and the ratio of link lengths differ among robots. Therefore, in order to discuss the optimal structure of a manipulator, we performed multi-objective optimization from the perspectives of end-effector reachability and joint torque. We analyze where existing manipulator structures stand within the sampling results of the optimization and provide insights for future manipulator design.

cs.RO↗

arXiv2025

REWW-ARM -- Remote Wire-Driven Mobile Robot: Design, Control, and Experimental Validation

Electronic devices are essential for robots but limit their usable environments. To overcome this, methods excluding electronics from the operating environment while retaining advanced electronic control and actuation have been explored. These include the remote hydraulic drive of electronics-free mobile robots, which offer high reachability, and long wire-driven robot arms with motors consolidated at the base, which offer high environmental resistance. To combine the advantages of both, this study proposes a new system, "Remote Wire Drive." As a proof-of-concept, we designed and developed the Remote Wire-Driven robot "REWW-ARM", which consists of the following components: 1) a novel power transmission mechanism, the "Remote Wire Transmission Mechanism" (RWTM), the key technology of the Remote Wire Drive; 2) an electronics-free distal mobile robot driven by it; and 3) a motor-unit that generates power and provides electronic closed-loop control based on state estimation via the RWTM. In this study, we evaluated the mechanical and control performance of REWW-ARM through several experiments, demonstrating its capability for locomotion, posture control, and object manipulation both on land and underwater. This suggests the potential for applying the Remote Wire-Driven system to various types of robots, thereby expanding their operational range.

cs.RO↗

arXiv2025

MEVITA: Open-Source Bipedal Robot Assembled from E-Commerce Components via Sheet Metal Welding

Various bipedal robots have been developed to date, and in recent years, there has been a growing trend toward releasing these robots as open-source platforms. This shift is fostering an environment in which anyone can freely develop bipedal robots and share their knowledge, rather than relying solely on commercial products. However, most existing open-source bipedal robots are designed to be fabricated using 3D printers, which limits their scalability in size and often results in fragile structures. On the other hand, some metal-based bipedal robots have been developed, but they typically involve a large number of components, making assembly difficult, and in some cases, the parts themselves are not readily available through e-commerce platforms. To address these issues, we developed MEVITA, an open-source bipedal robot that can be built entirely from components available via e-commerce. Aiming for the minimal viable configuration for a bipedal robot, we utilized sheet metal welding to integrate complex geometries into single parts, thereby significantly reducing the number of components and enabling easy assembly for anyone. Through reinforcement learning in simulation and Sim-to-Real transfer, we demonstrated robust walking behaviors across various environments, confirming the effectiveness of our approach. All hardware, software, and training environments can be obtained from https://github.com/haraduka/mevita .

cs.RO↗

arXiv2025

An RGB-D Camera-Based Multi-Small Flying Anchors Control for Wire-Driven Robots Connecting to the Environment

In order to expand the operational range and payload capacity of robots, wire-driven robots that leverage the external environment have been proposed. It can exert forces and operate in spaces far beyond those dictated by its own structural limits. However, for practical use, robots must autonomously attach multiple wires to the environment based on environmental recognition-an operation so difficult that many wire-driven robots remain restricted to specialized, pre-designed environments. Here, in this study, we propose a robot that autonomously connects multiple wires to the environment by employing a multi-small flying anchor system, as well as an RGB-D camera-based control and environmental recognition method. Each flying anchor is a drone with an anchoring mechanism at the wire tip, allowing the robot to attach wires by flying into position. Using the robot's RGB-D camera to identify suitable attachment points and a flying anchor position, the system can connect wires in environments that are not specially prepared, and can also attach multiple wires simultaneously. Through this approach, a wire-driven robot can autonomously attach its wires to the environment, thereby realizing the benefits of wire-driven operation at any location.

cs.RO↗

arXiv2025

KLEIYN : A Quadruped Robot with an Active Waist for Both Locomotion and Wall Climbing

In recent years, advancements in hardware have enabled quadruped robots to operate with high power and speed, while robust locomotion control using reinforcement learning (RL) has also been realized. As a result, expectations are rising for the automation of tasks such as material transport and exploration in unknown environments. However, autonomous locomotion in rough terrains with significant height variations requires vertical movement, and robots capable of performing such movements stably, along with their control methods, have not yet been fully established. In this study, we developed the quadruped robot KLEIYN, which features a waist joint, and aimed to expand quadruped locomotion by enabling chimney climbing through RL. To facilitate the learning of vertical motion, we introduced Contact-Guided Curriculum Learning (CGCL). As a result, KLEIYN successfully climbed walls ranging from 800 mm to 1000 mm in width at an average speed of 150 mm/s, 50 times faster than conventional robots. Furthermore, we demonstrated that the introduction of a waist joint improves climbing performance, particularly enhancing tracking ability on narrow walls.

cs.RO↗

arXiv2025

Design Optimization of Three-Dimensional Wire Arrangement Considering Wire Crossings for Tendon-driven Robots

Tendon-driven mechanisms are useful from the perspectives of variable stiffness, redundant actuation, and lightweight design, and they are widely used, particularly in hands, wrists, and waists of robots. The design of these wire arrangements has traditionally been done empirically, but it becomes extremely challenging when dealing with complex structures. Various studies have attempted to optimize wire arrangement, but many of them have oversimplified the problem by imposing conditions such as restricting movements to a 2D plane, keeping the moment arm constant, or neglecting wire crossings. Therefore, this study proposes a three-dimensional wire arrangement optimization that takes wire crossings into account. We explore wire arrangements through a multi-objective black-box optimization method that ensures wires do not cross while providing sufficient joint torque along a defined target trajectory. For a 3D link structure, we optimize the wire arrangement under various conditions, demonstrate its effectiveness, and discuss the obtained design solutions.

cs.RO↗

arXiv2025

PIMBS: Efficient Body Schema Learning for Musculoskeletal Humanoids with Physics-Informed Neural Networks

Musculoskeletal humanoids are robots that closely mimic the human musculoskeletal system, offering various advantages such as variable stiffness control, redundancy, and flexibility. However, their body structure is complex, and muscle paths often significantly deviate from geometric models. To address this, numerous studies have been conducted to learn body schema, particularly the relationships among joint angles, muscle tension, and muscle length. These studies typically rely solely on data collected from the actual robot, but this data collection process is labor-intensive, and learning becomes difficult when the amount of data is limited. Therefore, in this study, we propose a method that applies the concept of Physics-Informed Neural Networks (PINNs) to the learning of body schema in musculoskeletal humanoids, enabling high-accuracy learning even with a small amount of data. By utilizing not only data obtained from the actual robot but also the physical laws governing the relationship between torque and muscle tension under the assumption of correct joint structure, more efficient learning becomes possible. We apply the proposed method to both simulation and an actual musculoskeletal humanoid and discuss its effectiveness and characteristics.

cs.RO↗