Searcharxiv⌕ Search

arXiv subjects

Ken Araki

Publications and source records attributed to Ken Araki.

7 recordsLinked to original sources

24-hr Solid-State Power Generation with Self-Adaptive Tunable Radiative Coatings

Day-night solid-state power generation is experimentally demonstrated with thermoelectric generators integrated with a tunable radiative coating, which switches between a selective solar absorber during daytime and a radiative cooler during nighttime by temperature without any external control. The self-adaptive radiative coating is carefully designed with thermochromic VO2 thin film on heavily doped silicon substrate along with a phase-shifting silicon spacer in between, whose physical mechanism is elucidated. The fabricated coating exhibits a high solar absorptivity of 0.90 and a low infrared emissivity of 0.23 during daytime, and a high emissivity of 0.85 at night, resulting in large emissivity change of 0.62 within the atmospheric transparency window upon metal-to-insulator phase transition. From outdoor tests in a high vacuum apparatus, the tunable radiative coating in 35-mm squared size achieves 1.64 W/m2 power generation around noon time from a stack of commercial thermoelectric modules of 15 mm squared, which is 32% more from that with a black absorber. At night, it produces 26 mW/m2 power, outperforming the black emitter by 63%. Even exposed the ambient with convective loss, the 2-inch-round tunable coating generates power of 0.48 W/m2 at noon time, 14% more than the black absorber of the same size. The tunable radiative coating covered thermoelectric modules produces open circuit voltages from 433 mV to -62 mV in vacuum and from 300 mV to -51 mV in ambient through 24-hr continuous outdoor tests.

cond-mat.mtrl-sci↗

Observing Colossal and Tunable Near-field Thermal Radiation with A Highly Sensitive Annular Micro-thermocouple Junction

Near-field radiative heat transfer between two objects has been theoretically predicted and experimentally demonstrated to exceed far-field blackbody limit across nanoscale vacuum gap distance enabled by evanescent surface waves coupling, while significant enhancement by more than 100 times usually requires sub-50-nm vacuum gaps around room temperature. This is challenging for parallel-plate configuration with millimeter sample sizes due to intrinsic wafer bow and contaminant particles. Sphere-plate configuration with a microsphere attached to bimaterial cantilevers or micro-thermocouple tips has been used to experimentally demonstrate near-field radiative heat transfer down to 30-nm gaps, but it is much less developed because of the challenges in the sophisticated sensor fabrication, low sensitivity and weak signals. In this work, we overcome these challenges by an annular micro-thermocouple junction fabricated at the end of a glass fiber with straightforward thin-film deposition to achieve high measurement accuracy with large Seebeck coefficient 25 uV/K and thermal resistance 8.7e6 K/W. With a silica microsphere attached underneath the micro-thermocouple junction, we report experimental observation of colossal near-field radiation heat transfer over blackbody limit down to 10-nm gap up to 2600 times with quartz and 900 times with doped silicon. Upon phase transition of VO2 thin film emitter, tunable near-field heat transfer up to 430-fold enhancement is experimentally demonstrated at 15-nm gap with 64% reduction. Experimental data agrees well with rigorous modeling based on fluctuational electrodynamics and Derjaguin approximation, and underlying mechanism is understood by energy transmission calculations. The results will advance the experimental study and fundamental understanding of energy transport at nanoscale gaps.

cond-mat.mes-hall↗

Tunable Coatings on Various Substrates for Self-Adaptive Energy Harvesting with Daytime Solar Heating and Nighttime Radiative Cooling

In this work, tunable vanadium dioxide (VO2) metafilms on different substrate materials fabricated via low-oxygen furnace oxidation are demonstrated for self-adaptive daytime solar heating and nighttime radiative cooling. Because of its thermally-driven insulator-to-metal phase transition behavior, the VO2 metafilms work as spectrally-selective solar absorber with a high solar absorptance of 0.86 and a low infrared emissivity of ~0.2 at daytime, while they behave as selective cooler at nighttime to dissipate heat effectively through the atmospheric transparency window with a high emissivity of ~0.76 to cold outer space. From the outdoor vacuum tests, a significant temperature rise up to 169 K upon solar heating and a temperature drop of 17 K at night are experimentally observed from these tunable VO2 metafilms. With the atmosphere temperature fitted in-situ, the accurate heat transfer model shows excellent agreement with the stagnation temperature measurement, and indicates a high heating power of ~400 W/m2 at 80°C sample temperature in the middle of the day, and a cooling power of ~60 W/m2 at 30°C in equilibrium with ambient at night. This work would facilitate the development of self-adaptive coatings with cost-effective and scalable fabrication approaches for all-day energy harvesting.

cond-mat.mtrl-sci↗

High-quality Tungsten-doped Vanadium Dioxide Thin Films Fabricated in an Extremely Low-oxygen Furnace Environment

This work reports the fabrication and characterization of high-quality tungsten-doped vanadium dioxide (WxV1-xO2, x = 0~3 at. %) by thermal oxidation of sputtered tungsten-vanadium alloyed thin films with different atomic percentages and high-temperature annealing in an extremely low oxygen atmosphere (5 to 20 ppm) along with reduction of surface over-oxides in high vacuum (1 mPa). Oxidation parameters such as temperature, time and nitrogen purging rate are first optimized for obtaining high quality undoped VO2 thin film. Insulator-to-metal (IMT) phase transition behavior of VO2 thin films fabricated in a low-O2 environment is characterized with temperature dependent spectral infrared transmittance and electrical resistivity measurements, where there is 15% higher infrared transmittance change and additional 1 order change in resistivity in comparison with VO2 thin films fabricated in a O2-rich environment. Grazing angle X-ray diffraction scan confirms no presence of higher oxides in the VO2 oxidized in low-O2 environment, which improves its quality significantly. Comprehensive studies on thermal annealing and vacuum reduction for tungsten doped VO2 thin films are also carried out to find the optimal fabrication conditions. With the tungsten at. % measured by X-ray photoelectron spectroscopy, the optimal WVO2 thin films fabricated through this streamlined oxidation, annealing and reduction processes in extremely low-O2 furnace environment exhibit lowered IMT temperature at -23°C per at.% of tungsten dopants from 68°C without doping. This low-cost and scalable fabrication method could facilitate the wide development of tunable WVO2 coatings in thermal and energy applications.

cond-mat.mtrl-sci↗

Maximizing Infrared Transmission Contrast Upon Phase Transition of Thermally Grown Vanadium Dioxide Thin Films by Rapid Thermal Processing

Pristine vanadium dioxide (VO2), an insulator-to-metal transition (IMT) material, is grown via furnace oxidation followed by rapid thermal annealing with forming gas (5%H2/95%N2) which reduces surface over-oxides such as V2O5 formed during the oxidation. The evolutional IMT behaviors of the thermochromic film and vanadium oxide states over different reduction time are systematically studied with temperature-dependent infrared spectrometry, electrical resistivity, and X-ray diffraction measurements. After optimally reducing surface over-oxides to VO2, infrared transmission contrast upon phase transition is enhanced to 46% (at 9 um wavelength) compared to 23% from fully oxidation without any reduction. Moreover, pristine VO2 thin film obtained from thermal oxidation and optimal reduction processes exhibits sharp phase transition and narrow thermal hysteresis within 2~4°C in both infrared transmission and electrical resistivity, which are comparable to the VO2 of best quality prepared by other sophisticated fabrication techniques. The thermally grown method presented here would facilitate the scalable fabrication of high-quality VO2 thin films and tunable radiative coatings for high-performance thermal control applications.

cond-mat.mtrl-sci↗

Binary Dispersion Formulations of Mid-Infrared Lossless Dielectric Contrast Gratings

The Zero Contrast Grating (ZCG) is a promising candidate for moded and dispersive mid-infrared (MIR) photonics for its broadband transmittance and reflectance greater than 99.9%. The optimal grating design including refractive index and grating parameters is investigated, and is compared to its analogue the High Contrast Grating (HCG). This study provides insights on how ZCG can manipulate the electromagnetic waves within the low refractive index dielectric bars. The foundations following its near-perfect transmittance and reflectance due to phase matching are described from the perspective of diffraction orders and dispersion relations. Both 0th and 1st order diffraction contribute to construction or destruction of interferences that occur at the output plane, which is a significant finding in differentiating ZCG and HCG. Applications for the ZCG can be found in selective bandpass windows, beam splitters, broadband reflectors, and narrowband thermal emitters.

physics.optics↗

An Optimized Self-Adaptive Thermal Radiation Turn-Down Coating with Vanadium Dioxide Nanowire Array

High performance metasurfaces for thermal radiative cooling applications can be identified using computational optimization methods. This work has identified an easy-to-fabricate temperature phase transition VO2 nanowire array laid atop dielectric BaF2 Fabry-Perot cavity-on-metal with total coating thickness of 2 um. This optimized structure has ability to self-adaptively switch between high reflectance at low temperature to high emissivity at high temperature in the broad thermal infrared spectrum. This design demonstrates exceptional turn-down figure-of-merit compared to previously realized configurations utilizing VO2 metasurfaces and multilayers. The mechanism is achieved with a sub-wavelength nanowire array effective medium that switches between anti-reflecting gradient coating and Fabry-Perot interference. This thin metasurface coating could impact self-cooling of the solar cells, batteries, and electrical devices where risk presents at high temperatures.

physics.optics↗