Searcharxiv⌕ Search

arXiv subjects

Kenichi N. Komagata

Publications and source records attributed to Kenichi N. Komagata.

5 recordsLinked to original sources

Strong coupling of a reconfigurable ${}^{171}$Yb atom array to a tunable telecom-band nanofiber cavity

Nanophotonic cavities provide strong atom-photon coupling in a compact, directly fiber-coupled geometry, while a reconfigurable array of $^{171}$Yb atoms combines high-fidelity gates with a metastable qubit state coupled directly to a telecom-band transition, making the two a natural interface between neutral-atom quantum processors and telecom quantum networks. Here, we realize strong atom-cavity coupling on the ${}^{3}\mathrm{P}_0 \leftrightarrow {}^{3}\mathrm{D}_1$ transition of ${}^{171}\mathrm{Yb}$, establishing, to our knowledge, the first neutral-atom cavity-QED system to reach the single-atom strong-coupling regime on a telecom-band atomic transition. Reflection spectroscopy of a single-sided cavity yields a single-atom internal cooperativity of $C_{\mathrm{in}}=5.6(1.0)$ and collective coupling following $\sqrt{N}$ scaling up to $N=5$ atoms, with homogeneous coupling at antinodes over $\sim$200 $\mathrmμ$m along the nanofiber. Thermal tuning of a fiber Bragg grating provides in situ control of the cavity outcoupling rate over two orders of magnitude from the undercoupled to the overcoupled regime, relevant for various atom-cavity protocols. We confirm compatibility with reconfigurable atom arrays by demonstrating 99.95(6)\% imaging fidelity and trap lifetimes comparable to free-space array, at 1 $\mathrmμ$m from the nanofiber axis. Moreover, the diameter-engineered antireflection design of the nanofiber enables tweezer-based atom transport across the nanofiber with no measurable loss or heating at 4.5 $\mathrmμ$m above the nanofiber, supporting a two-layer architecture for the nanofiber-integrated atom array. From the demonstrated atom-cavity coupling, atom capacity, and cavity mode profile, we project time-multiplexed remote atom-atom entanglement generation at 40 kHz, with prospects for further scaling through technical enhancements and channel multiplexing.

quant-ph↗

Non-resonant Optical Injection Locking in Quantum Cascade Laser Frequency Combs

Optical injection locking of the repetition frequency of a quantum cascade laser frequency comb is demonstrated using an intensity modulated near-infrared light at 1.55 $μ$m illuminating the front facet of the laser. Compared to the traditional electrical modulation approach, the introduced technique presents benefits from several perspectives such as the availability of mature and high bandwidth equipment in the near-infrared, circumvent the need of dedicated electronic components for the quantum cascade laser, and allows a direct link between the near and mid-infrared for amplitude to frequency modulation. We show that this stabilization scheme, used with moderate near-infrared power of a few milliwatts, allows for a strong reduction of the frequency noise. We also perform a full characterization of the mechanism and evidence that the locking range follows Adler's law. A comparison of our results with those in recent literature indicates that the optical approach leads to better performance compared to the traditional method, which we expect to benefit mid-infrared spectroscopy and metrological applications.

physics.optics↗

Coherence analysis of tightly locked mid-infrared quantum cascade laser frequency combs

Frequency combs are powerful tools for many applications and high performances are achieved by stabilizing these lasers. For operation in the mid-infrared, quantum cascade lasers (QCL) are ideal candidates as they present numerous advantages. However, stabilized QCL-combs lack of a detailed characterization of their noise properties due to the sensitivity limits of current analyzing techniques. To overcome these challenges, we developed what we believe to be the first tightly locked dual QCL-comb system. Its use is twofold. First, phase noise analysis of the dual-comb signal shows residual phase noise below 600 mrad for all comb lines, and we characterize the comb coherence as well as the performances of the repetition frequency locking mechanism. Second, we demonstrate coherent averaging with a $7 \times 10^5$ Hz$^{1/2}$ figure-of-merit system, which is compatible with high precision spectroscopy.

physics.optics↗

Coherent Control of Mid-Infrared Frequency Comb by Optical Injection of Near-Infrared Light

We demonstrate the use of a low power near-infrared laser illuminating the front facet of a quantum cascade laser (QCL) as an optical actuator for the coherent control of a mid-infrared frequency comb. We show that by appropriate current control of the QCL comb and intensity modulation of the near-infrared laser, a tight phase lock of a comb line to a distributed feedback laser is possible with 2 MHz of locking bandwidth and 200 mrad of residual phase noise. A characterization of the whole scheme is provided showing the limits of the electrical actuation which we bypassed using the optical actuation. Both comb degrees of freedom can be locked by performing electrical injection locking of the repetition rate in parallel. However, we show that the QCL acts as a fast near-infrared light detector such that injection locking can also be achieved through modulation of the near-infrared light. These results on the coherent control of a quantum cascade laser frequency comb are particularly interesting for coherent averaging in dual-comb spectroscopy and for mid-infrared frequency comb applications requiring high spectral purity.

physics.optics↗

High-Resolution Quantum Cascade Laser Dual-Comb Spectroscopy in the Mid-Infrared with Absolute Frequency Referencing

Quantum cascade laser (QCL) frequency combs have revolutionized mid-infrared (MIR) spectroscopy by their high brightness and fast temporal resolution, and are a promising technology for fully-integrated and cost-effective sensors. As for other integrated comb sources such as micro-combs and interband cascade laser, QCLs have a comb spacing of several GHz, which is adequate for measurements of wide absorbing structures, typically found in liquid or solid samples. However, high-resolution gas-phase spectra require spectral interleaving and frequency calibration. We developed a frequency calibration scheme for fast interleaved measurements with combs featuring multi-GHz spacing. We then demonstrate dual-comb spectroscopy with 600 kHz accuracy in single-shot 54-ms measurements over 40 cm$^{-1}$ using two QCLs at 7.8 $\mathrmμ$m. This work is an important contribution towards fast fingerprinting of complex molecular mixtures in the MIR. Moreover, the calibration scheme could be used with micro-combs for spectroscopy and ranging, both in comb-swept and comb-calibrated setups.

physics.optics↗