arXiv subjects

Kenji Nishimoto

Publications and source records attributed to Kenji Nishimoto.

9 recordsLinked to original sources

arXiv2026

Photonic-crystal microresonator-based LiDAR engine

Self-injection-locked (SIL) narrow-linewidth lasers based on high-Q microresonators are promising sources for frequency-modulated continuous-wave (FMCW) LiDAR, but the SIL mechanism as well as its key characteristics such as the frequency sweep range and the noise performance are often determined by uncontrolled backscattering in the resonator. Here, we investigate a tunable SIL laser based on a corrugated photonic-crystal (PhC) microresonator in which the feedback strength is set by design. Numerical and experimental results show that stronger SIL feedback expands the sweep range accessible through resonator modulation while also impacting the phase-noise and linewidth during sweeping, revealing a trade-off between frequency tunability and noise performance. Using CMOS-compatible microheater tuning (sub-1 V driving voltage), we demonstrate linearized up- and down-chirps with 224 THz/s over approximately 3 GHz and, in a proof-of-concept ranging experiment, measure a 10 m fiber length with a standard deviation below 3 mm. These results establish PhC microresonators with engineered SIL feedback as robust, compact, CMOS-compatible LiDAR engines.

physics.optics↗

arXiv2025

Beyond 350 GHz: Single-channel 112 Gbps photonic wireless transmission at 560 GHz using soliton microcombs

Sixth-generation (6G) back-haul links will require terahertz (THz) carriers above 350 GHz to escape the congested 300 GHz band and support >100 Gbps data rates. Photonic THz transmitters have so far remained below 350 GHz because high-frequency photomixing suffers from phase noise and power limits. Here we demonstrate single-channel wireless transmission at 560 GHz using a fibre-packaged silicon-nitride soliton microcomb as a compact, low-phase-noise optical reference. A high numerical aperture, UV-bonded fibre interface sustains soliton operation for more than 24 hours with 1 W pump power. We phase-lock two distributed-feedback lasers (DFBs) to adjacent comb lines and photomix them in a high-power uni-travelling-carrier photodiode, generating a 560 GHz carrier that bears in-phase and quadrature modulation. We achieve hard-decision forward-error-correction-qualified quadrature phase-shift keying and 16-quadrature amplitude modulation (16QAM) transmissions at 42 and 28 GBaud, respectively, attaining a record 112 Gbps data rate at 560 GHz. Relative to free-running DFBs, microcomb-locked photomixing cuts carrier linewidth and improves 16QAM error-vector magnitude. The results establish soliton microcombs as compact and scalable frequency references for >100 Gbps sub-THz links and chart a path toward compact 6 G back-haul radios.

physics.optics↗

arXiv2025

Self-cooling, blue-detuned dissipative Kerr microresonator soliton comb

Dissipative Kerr solitons (DKSs) generated in high-Q microresonators driven by continuous-wave (CW) lasers provide chip-scale optical frequency combs composed of mutually coherent CW lines. However, their small mode volume makes them highly susceptible to thermal fluctuations, and the resulting thermo-refractive noise (TRN) perturbs the repetition rate $f_{\rm rep}$. Here, we experimentally demonstrate a blue-detuned DKS in a coupled-ring microresonator. By employing avoided-mode-crossing (AMX)-induced dispersion engineering at the pump mode, DKSs are generated even when the pump laser is tuned to the higher-frequency (blue) side of the resonance. In this regime, the pump laser not only seeds DKS formation but also serves as a cooling laser for the thermally sensitive pumped mode. We observe a self-cooling effect that reduces the phase noise of $f_{\rm rep}$ by up to 14.5 dB, while achieving a pump-to-comb conversion efficiency as high as 37 %. These results establish blue-detuned DKSs as a thermally robust and power-efficient solution for integrated microcomb systems, eliminating the need for auxiliary lasers.

physics.optics↗

arXiv2025

Direct fiber-coupled soliton microcomb system with enhanced stability and reproducibility via high numerical-aperture polarization-maintaining single-mode fibers and temperature control

We propose a compact and robust system architecture for soliton microcomb generation, based on two key techniques: direct fiber coupling using high numerical-aperture polarization-maintaining single-mode fibers (high-NA PMFs) and active temperature control of the microresonator. These complementary strategies address two major challenges in microcomb implementation: environmental sensitivity and resonance instability. Building on prior work using single-mode fiber (SMF)-based direct coupling, which demonstrated device miniaturization and partial suppression of thermal drift in coupling efficiency, our PMF-based approach offers enhanced thermal stability and significantly greater robustness to environmental disturbances such as temperature fluctuations and vibration. In our system, precision alignment using microscopes or multi-axis stages is no longer required, enabling a simplified optical setup and stable long-term operation. The direct coupling scheme achieved a coupling efficiency of 57.7% and maintained soliton operation for over 24 hours under external perturbations. In parallel, active temperature control of the microresonator was quantitatively evaluated, reducing the wavelength variation of the pump and auxiliary lasers by 79% and 97%, respectively. This stability enables reproducible soliton generation even in thermally dynamic environments. Comparative experiments with SMF-based direct coupling and lensed-SMF-based free-space coupling systems confirmed the superior performance of the PMF-based design in terms of coupling stability, soliton lifetime, and immunity to environmental noise. The architecture developed in this study lays a strong foundation for future integration into compact modules, paving the way for portable and robust microcomb sources in real-world photonic systems.

physics.optics↗

arXiv2023

Wireless data transmission in a 560-GHz band using low-phase-noise terahertz wave generated by photomixing of a pair of distributed feedback lasers injection-locking to Kerr micro-resonator soliton comb

The demand for higher data rates in next-generation mobile wireless communication systems (6G) has led to significant interest in terahertz (THz) waves as a high-frequency, broad modulation bandwidth carrier wave. In this study, we propose and demonstrate a wireless data transfer in the 560-GHz band using low-phase-noise THz waves generated by photomixing of a pair of distributed feedback lasers injection-locking to Kerr micro-resonator soliton comb. Experimental results showed near-error-free on-off keying (OOK) data transfer at 1 Gbit/s in the 560-GHz band, with a Q-factor of 6.23, surpassing the error-free limit. Also, modulation formats of binary phase shift keying (BPSK) and quadrature phase shift keying (QPSK) were successfully used, showing clear constellation diagrams and relatively low root mean squared error vector magnitude (rms EVM) values of 23.9% and 23.6%, respectively. Moreover, data transfer at 0.4 Gbit/s in 16 quadrature amplitude modulation (16QAM) demonstrated clear isolated symbols and achieved a low rms EVM value of 8.1%, complying with the IEEE 802.15.3d standard amendment. These demonstrations highlight the potential of using injection-locked DFB lasers with the Kerr micro-resonator soliton comb to achieve high-quality, high-speed wireless data transfer in the 560-GHz band. These findings contribute significantly to the advancement of wireless communication technology in the THz frequency range and pave the way for the realization of 6G wireless communication systems.

physics.optics↗

arXiv2023

Terahertz wireless communication at 560-GHz band using Kerr micro-resonator soliton comb

Terahertz (THz) waves have attracted attention as carrier waves for next-generation wireless communications (6G). Electronic THz emitters are widely used in current mobile communications; however, they may face technical limitations in 6G with upper-frequency limits. We demonstrate wireless communication in a 560-GHz band by using a photonic THz emitter based on photomixing of a 560-GHz-spacing soliton microcomb in a uni-travelling carrier photodiode together with a THz receiver of Schottky barrier diode. The on-off keying data transfer with 2-Gbit/s achieves a Q-factor of 3.4, thus, satisfying the limit of forward error correction.

physics.optics↗

arXiv2022

Low phase noise THz generation from a fiber-referenced Kerr microresonator soliton comb

THz oscillators generated via frequency-multiplication of microwaves are facing difficulty in achieving low phase noise. Photonics-based techniques, in which optical two tones are translated to a THz wave through opto-electronic conversion, are promising if the relative phase noise between the two tones is well suppressed. Here, a THz ($\approx$ 560 GHz) wave with a low phase noise is provided by a frequency-stabilized, dissipative Kerr microresonator soliton comb. The repetition frequency of the comb is stabilized to a long fiber in a two-wavelength delayed self-heterodyne interferometer, significantly reducing the phase noise of the THz wave. A measurement technique to characterize the phase noise of the THz wave beyond the limit of a frequency-multiplied microwave is also demonstrated, showing the superior phase noise of the THz wave to any other photonic THz oscillators (> 300 GHz).

physics.optics↗

arXiv2021

Thermal control of Kerr microresonator soliton comb via an optical sideband

We report the thermal control of a dissipative Kerr microresonator soliton comb via an optical sideband generated from an electro-optic modulator. Same as the previous reports using an independent auxiliary laser, our sideband-based (S-B) auxiliary light also enables to access a stable soliton comb and to reduce the phase noise of the soliton comb, greatly simplifying the setup with an auxiliary laser. More importantly, because of the intrinsically high frequency/phase correlation between the pump and S-B auxiliary light, the detuning between the pump and resonance frequency is automatically almost fixed, allowing the 18 times larger "effective"soliton existence range than the conventional method using an independent auxiliary laser, as well as the scanning of the soliton comb of more than 10 GHz without using microheaters.

physics.optics↗

arXiv2021

Generation of a microresonator soliton comb via current modulation of a DFB laser

Dissipative Kerr-microresonator soliton combs (hereafter called soliton combs) has been rapidly progressing as compact frequency combs. Comb mode scanning of the soliton combs with a large range and fast speed is of paramount importance for applications such as LiDAR and spectroscopy, requiring large and rapid frequency scanning of a pump continuous-wave (CW) laser as well as resonance frequency of a microresonator. Here, we demonstrate the generation of a soliton comb by a distributed feedback (DFB) laser toward the comb mode scanning with a large range and fast speed. Compared with conventional pump CW lasers (i.e. external cavity diode lasers: ECDLs), DFB lasers can be frequency-scanned more largely and rapidly without mode-hopping. In addition, because of the fast scan speed of the DFB laser, a single soliton comb is generated simply by controlling the injection current of the DFB laser, greatly simplifying the system without having any additional optical modulators such as a carrier-suppressed single-sideband modulator (CS-SSB modulator), acousto-optic modulator (AOM), and auxiliary CW laser.

physics.ins-det↗