SearcharxivSearch

arXiv subjects

Kenneth S. Breuer

Publications and source records attributed to Kenneth S. Breuer.

17 recordsLinked to original sources

A minimal wake-vortex model explains formation flight of flapping birds

Collective patterns of motion emerge across biological taxa: insects swarm, fish school, and birds flock. In particular, many large migratory bird species form distinctly ordered V-shaped formations, which experiments and direct numerical simulations have demonstrated provide substantial energetic benefits during long-distance flight. However, the precise aerodynamic and morphological mechanisms which underlie these benefits remain unclear. In this work, we develop a reduced-order model of the wake-vortex interactions between two flapping birds flying in tandem. The model retains essential unsteady flapping dynamics while remaining computationally tractable. By optimizing over a six-dimensional state space, which comprises the follower's three-dimensional relative position as well as three independent flapping parameters, we identify the energetically optimal leader-follower configuration of northern bald ibises (Geronticus eremita). The predicted optimum agrees quantitatively with live-bird measurements. Because of its simplicity, the model allows for direct interrogation of the physical mechanisms responsible for this optimum. In particular, it isolates precisely how the follower's wing kinematics interact with the leader's wake to enhance aerodynamic efficiency. The model predicts an 11% reduction in total mechanical power for a follower in formation flight -- consistent with experimental estimates -- and shows that this saving arises from reductions in both induced and profile power, dominated by decreased profile power enabled primarily through reduced flapping amplitude and, secondarily, reduced upstroke flexion. These results provide a mechanistic explanation for the structure of V-formations and offer new insight into the aerodynamic principles governing collective flight.

physics.flu-dyn

Flapping Wings Amplify Pitch Stability: Insights from a Robotic Bird

Using a flapping robot in a wind tunnel, we show that flapping faster amplifies existing longitudinal static stability (focusing on the pitch stiffness) and can even make an unstable flier stable. We show that stability for a flapper is not just a function of the static margin, but also the Strouhal number (St). Experimental data from measurements over a wide range of frequencies and wind speeds show good agreement with a quasi-steady blade-element (QSBE) model and a low-order approximation of the QSBE model. The increase in pitch stiffness at higher St can primarily be explained by the increase in the mean effective wind speed. If wingbeat amplitude was allowed to vary, the model suggests that the pitch stiffness would increase with amplitude at high St but decrease with amplitude at low St. Despite using simplified wingbeat kinematics and a restricted analysis of stability, these results provide insight into how altering wingbeat kinematics can affect the passive stability of flying animals and ornithopters.

physics.flu-dyn

Coupled poro-elastic behavior of hyper-elastic membranes

This study investigates the coupled deformation and flow behavior of thin, hyper-elastic, porous membranes subjected to pressure loading. Using bulge test experiments, optical deformation measurements, and flow rate characterization, we analyze the structural and fluid dynamic responses of membranes with varying material stiffness and porosity patterns. A two-parameter Gent model accurately captures the hyper-elastic deformation, and local stretch analysis reveals non-uniform stretch distributions across the membrane. We find that membrane deformation is primarily governed by material stiffness and pressure, independent of porosity. Pore diameter scales linearly with local stretch, leading to a radial gradient of increasing pore size toward the membrane center. Flow rate scaling is characterized using a discharge coefficient, which accounts for both pore area expansion and pressure losses. Together, these results establish a unified framework that links structural deformation and flow performance in flexible porous membranes, providing robust scaling laws for the design of adaptive, bio-inspired flow-regulating systems.

physics.flu-dyn

Optimal Kinematics for Energy Harvesting Using Favorable Wake-Foil Interactions in Tandem Oscillating Hydrofoils

The energy harvesting performance of a pair of oscillating hydrofoil turbines in tandem configuration is experimentally studied to determine the optimal kinematics of the array. By characterizing interactions between the wake produced by the leading foil and the trailing foil, the kinematic configuration required to maximize array power extraction is determined. This is done by prescribing leading foil kinematics that produce specific wake regimes, identified by the maximum effective angle of attack parameter. The kinematics of the trailing foil are allowed to vary significantly from those of the leading foil. The heave and pitch amplitude, inter-foil phase, and foil separation of the trailing foil are varied within each wake regime and the system performance is evaluated. The power extracted by each foil over an oscillation cycle is measured through force and torque measurements. Wake-foil interactions that yield improvements in trailing foil performance are analyzed with time-resolved Particle Image Velocimetry. Constructive and destructive wake-foil interactions are compared, and it was determined that trailing foil performance could be improved by either avoiding interactions with wake vortices or by interacting directly with them. The latter configuration takes advantage of the wake vortex, and does not see power loss during the oscillation cycle. System power from the two foils is maximized when the leading foil is operated at an intermediate maximum angle of attack range, and when the trailing foil avoids collisions with wake vortices. This optimal array configuration sees both foils operating with different kinematics compared to the optimal kinematics for a single oscillating foil.

physics.flu-dyn

Shape-Morphing Dynamics of Soft Compliant Membranes for Drag and Turbulence Modulation

We study the kinematics and dynamics of a highly compliant membrane disk placed head-on in a uniform flow. With increasing flow velocity, the membrane deforms nonlinearly into increasingly parachute-like shapes. These aerodynamically elongated materials exhibit a modified drag law, which is linked to the elastohydrodynamic interactions. We predict the unsteady structural response of the membranes using a nonlinear, aeroelastic model -- in excellent agreement with experimental measurements of deformations and force fluctuations. With simultaneous membrane interface tracking, force measurements and flow tracing, we reveal that a peculiar skewness in the membrane's oscillations triggers turbulence production in the wake, thereby modulating the drag. The present work provides a demonstration of the complex interplay between soft materials and fluid turbulence, leading to new, emergent system properties.

physics.flu-dyn

Wake-foil interactions and energy harvesting efficiency in tandem oscillating foils

Oscillating foils in synchronized pitch/heave motions can be used to harvest hydrokinetic energy. By understanding the wake structure and its correlation with the foil kinematics, predictive models for how foils can operate in array configurations can be developed. To establish a relationship between foil kinematics and wake characteristics, a wide range of kinematics is explored in a two-foil tandem configuration with interfoil spacing from four to nine chord lengths separation and multiple interfoil phases. Using data from experiments and simulations, an in-depth wake analysis is performed and the mean velocity and the turbulent kinetic energy are quantified in the wake. With this energy quantification, the trailing foil efficiency is modified to account for the mean flow in addition to the energy transported by the coherent leading edge vortices (LEVs) shed from the leading foil. With the mean wake velocity, a predictive wake model is able to distinguish three regimes through analyzing trailing foil efficiency profiles and the strength of the primary LEV shed from the leading foil. Dividing the wake into regimes is an insightful way to narrow the range of foil kinematics and configurations and improve the energy harvesting in a two-tandem foil array.

physics.flu-dyn

Nonlinear modeling and characterization of ultrasoft silicone elastomers

We introduce a strain-energy based nonlinear hyper-elastic formulation to model the material properties of ultrasoft dielectric elastomers over a wide range of elastic properties, prestretch, and thicknesses. We build on the uniaxial Gent formulation, and under the conditions of equi-biaxial strain, derive an expression for the bulge deformation versus pressure. A circular bulge test methodology is developed to experimentally measure the mechanical response of the silicone membranes. The Gent model captures both neo-Hookean and strain-stiffening behaviors, and gives predictions which are in agreement with experimental measurements. Membranes with different thinner fractions are characterized over nearly one order of magnitude variation in shear modulus. Stiffer membranes are observed to harden at lower stretch ratios due to the increased fraction of polymer chains in them. The present approach offers a simple and cost-effective procedure for characterizing soft membranes under commonly encountered biaxial deformation conditions.

cond-mat.mtrl-sci

Measuring the viscoelastic behavior of dilute polymer solutions using high-speed statistical particle microrheology

The viscoelastic behavior of polymer solutions is commonly measured using oscillating shear rheometry, however, the accuracy of such methods is limited by the oscillating frequency of the equipment and since the relaxation time of the dilute polymer solutions is short, this requires measurement at very high frequencies. Microrheology has been proposed to overcome this technical challenge. Yet the equipment for resolving the statistics of particle displacements in microrheology is expensive. In this work, we measured the viscoelastic behavior of Methocel solutions at various concentrations using a conventional epi-fluorescence microscope coupled to a high-speed intensified camera. Statistical Particle Tracking is used in analyzing the mean-squared displacement of the dispersive particles. Relaxation times ranging from 0.76 - 9.00 ms and viscoelastic moduli, G' between 11.34 and 3.39 are reported for Methocel solutions of concentrations between 0.063 - 0.5%

physics.flu-dyn

Effects of shear thinning viscosity and viscoelastic stresses on flagellated bacteria motility

The behavior of flagellated bacteria swimming in non-Newtonian media remains an area with contradictory and conflicting results. We report on the behavior of wild-type and smooth-swimming E. coli in Newtonian, shear thinning and viscoelastic media, measuring their trajectories and swimming speed using a three dimensional real-time tracking microscope. We conclude that the speed enhancement in Methocel solution at higher concentration is due to shear-thinning and an analytical model is used to support our experimental result. We argue that shear-induced normal stresses reduce the wobbling behavior during cell swimming but do not significantly affect swimming speed. However, the normal stresses play an important role in decreasing the flagellar bundling time which changes the swimming speed distribution. A dimensionless number, the "Strangulation number" (Str) is proposed and used to characterize this effect.

physics.bio-ph

Changes in the flagellar bundling time account for variations in swimming behavior of flagellated bacteria in viscous media

Although the motility of the flagellated bacteria, Escherichia coli, has been widely studied, the effect of viscosity on swimming speed remains controversial. The swimming mode of wild-type E.coli is often idealized as a "run-and- tumble" sequence in which periods of swimming at a constant speed are randomly interrupted by a sudden change of direction at a very low speed. Using a tracking microscope, we follow cells for extended periods of time in Newtonian liquids of varying viscosity, and find that the swimming behavior of a single cell can exhibit a variety of behaviors including run-and-tumble and "slow-random-walk" in which the cells move at relatively low speed. Although the characteristic swimming speed varies between individuals and in different polymer solutions, we find that the skewness of the speed distribution is solely a function of viscosity and can be used, in concert with the measured average swimming speed, to determine the effective running speed of each cell. We hypothesize that differences in the swimming behavior observed in solutions of different viscosity are due to changes in the flagellar bundling time, which increases as the viscosity rises, due to the lower rotation rate of the flagellar motor. A numerical simulation and the use of Resistive Force theory provide support for this hypothesis.

physics.bio-ph

Propulsion by a Helical Flagellum in a Capillary Tube

We study the microscale propulsion of a rotating helical filament confined by a cylindrical tube, using a boundary-element method for Stokes flow that accounts for helical symmetry. We determine the effect of confinement on swimming speed and power consumption. Except for a small range of tube radii at the tightest confinements, the swimming speed at fixed rotation rate increases monotonically as the confinement becomes tighter. At fixed torque, the swimming speed and power consumption depend only on the geometry of the filament centerline, except at the smallest pitch angles for which the filament thickness plays a role. We find that the `normal' geometry of \textit{Escherichia coli} flagella is optimized for swimming efficiency, independent of the degree of confinement. The efficiency peaks when the arc length of the helix within a pitch matches the circumference of the cylindrical wall. We also show that a swimming helix in a tube induces a net flow of fluid along the tube.

physics.flu-dyn

Helical swimming in Stokes flow using a novel boundary-element method

We apply the boundary-element method to Stokes flows with helical symmetry, such as the flow driven by an immersed rotating helical flagellum. We show that the two-dimensional boundary integral method can be reduced to one dimension using the helical symmetry. The computational cost is thus much reduced while spatial resolution is maintained. We review the robustness of this method by comparing the simulation results with the experimental measurement of the motility of model helical flagella of various ratios of pitch to radius, along with predictions from resistive-force theory and slender-body theory. We also show that the modified boundary integral method provides reliable convergence if the singularities in the kernel of the integral are treated appropriately.

physics.flu-dyn

The motion, stability and breakup of a stretching liquid bridge with a receding contact line

The complex behavior of drop deposition on a hydrophobic surface is considered by looking at a model problem in which the evolution of a constant-volume liquid bridge is studied as the bridge is stretched. The bridge is pinned with a fixed diameter at the upper contact point, but the contact line at the lower attachment point is free to move on a smooth substrate. Experiments indicate that initially, as the bridge is stretched, the lower contact line slowly retreats inwards. However at a critical radius, the bridge becomes unstable, and the contact line accelerates dramatically, moving inwards very quickly. The bridge subsequently pinches off, and a small droplet is left on the substrate. A quasi-static analysis, using the Young-Laplace equation, is used to accurately predict the shape of the bridge during the initial bridge evolution, including the initial onset of the slow contact line retraction. A stability analysis is used to predict the onset of pinch-off, and a one-dimensional dynamical equation, coupled with a Tanner-law for the dynamic contact angle, is used to model the rapid pinch-off behavior. Excellent agreement between numerical predictions and experiments is found throughout the bridge evolution, and the importance of the dynamic contact line model is demonstrated.

cond-mat.soft

Minimal Model for Hydrodynamic Synchronization

Motivated by the observed coordination of nearby beating cilia, we use a scale model experiment to show that hydrodynamic interactions can cause synchronization between rotating paddles driven at constant torque in a very viscous fluid. Synchronization is only observed when the shafts supporting the paddles have some flexibility. The phase difference in the synchronized state depends on the symmetry of the paddles. We use the method of regularized stokeslets to model the paddles and find excellent agreement with the experimental observations. We also use a simple analytic theory based on far-field approximations to derive scaling laws for the synchronization time as a function of paddle separation.

cond-mat.soft

Micron-scale droplet deposition on a hydrophobic surface using a retreating syringe

Droplet deposition onto a hydrophobic surface is studied experimentally and numerically. A wide range of droplet sizes can result from the same syringe, depending strongly on the needle retraction speed. Three regimes are identified according to the motion of the contact line. In Region I, at slow retraction speeds, the contact line expands and large droplets can be achieved. In Region II, at moderate needle speeds, a quasi-cylindrical liquid bridge forms resulting in drops approximately the size of the needle. Finally, at high speeds (Region III), the contact line retracts and droplets much smaller than the syringe diameter are observed. Scaling arguments are presented identifying the dominant mechanisms in each regime. Results from nonlinear numerical simulations agree well with the experiments, although the accuracy of the predictions is limited by inadequate models for the behavior of the dynamic contact angle.

physics.flu-dyn

Shape transition and propulsive force of an elastic rod rotating in a viscous fluid

The deformation of thin rods in a viscous liquid is central to the mechanics of motility in cells ranging from \textit{Escherichia coli} to sperm. Here we use experiments and theory to study the shape transition of a flexible rod rotating in a viscous fluid driven either by constant torque or at constant speed. The rod is tilted relative to the rotation axis. At low applied torque, the rod bends gently and generates small propulsive force. At a critical torque, the rotation speed increases abruptly and the rod forms a helical shape with much greater propulsive force. We find good agreement between theory and experiment.

cond-mat.soft

A macroscopic scale model of bacterial flagellar bundling

Escherichia coli and other bacteria use rotating helical filaments to swim. Each cell typically has about four filaments, which bundle or disperse depending on the sense of motor rotation. To study the bundling process, we built a macroscopic scale model consisting of stepper-motor-driven polymer helices in a tank filled with a high-viscosity silicone oil. The Reynolds number, the ratio of viscous to elastic stresses, and the helix geometry of our experimental model approximately match the corresponding quantities of the full scale E. coli cells. We analyze digital video images of the rotating helices to show that the initial rate of bundling is proportional to the motor frequency and is independent of the characteristic relaxation time of the filament. We also determine which combinations of helix handedness and sense of motor rotation lead to bundling.

cond-mat.soft