arXiv subjects

Kensei Terashima

Publications and source records attributed to Kensei Terashima.

At least 37 records · Page 2Linked to original sources

arXiv2022

Effect of Non-stoichiometry on Magnetocaloric Properties of HoB2 Gas-Atomized Particles

We fabricate gas-atomized particles by inductively melting electrode rods of HoB2-x (x = -0.3, 0, 0.3, and 1.0) and investigate the effect of non-stoichiometry on the phase fraction, microstructure, and physical properties. Shifting the stoichiometric ratio of the electrode rod to the B (Ho)-rich side increases HoB4 (Ho) phase in the resulting atomized particles. Even if the atomized particles contain 15-20 weight percent (wt.%) of the impurity phase, the influence of which on the physical properties is less severe: the maximum value of the magnetic entropy change is only reduced by 10% compared to HoB2.0 particles. We further find that the ductile Ho phase exists so as to fill the space between the brittle HoB2 phases in the atomized particles, which may be beneficial to the mechanical properties of the particles. Our findings suggest that it would be better to use the Ho-rich electrode rods than the stoichiometric ones to produce HoB2-x particles with more suitable properties as a magnetic refrigerant for magnetic refrigeration systems.

cond-mat.mtrl-sci↗

arXiv2022

Magnetocaloric particles of the Laves phase compound HoAl2 prepared by electrode induction melting gas atomization

Processing magnetocaloric materials into magnetic refrigerant particles is an essential issue in developing high-performance magnetic refrigerators. Here, we succeed in stably producing magnetocaloric particles of the promising material HoAl2 by a newly devised method based on electrode induction melting gas atomization process. The particle size range is on the order of submillimeter, which is suitable for practical refrigeration systems. The resulting particles with less contamination have good morphological, magnetic, and magnetocaloric properties: (i) almost spherical shapes with few internal pores, (ii) a sharp ferromagnetic transition around 30 K, and (iii) a large magnetocaloric effect comparable to the bulk counterpart. These features suggest the HoAl$_{2}$ gas-atomized particles have the potential of use as a magnetic refrigerant. The presented method can be applied not only to HoAl2 but also to other brittle magnetocaloric materials with high melting points, facilitating the production of various magnetic refrigerants needed to develop magnetic refrigerators for hydrogen liquefaction.

cond-mat.mtrl-sci↗

arXiv2022

Gas-atomized particles of giant magnetocaloric compound HoB2 for magnetic hydrogen liquefiers

The processing of promising magnetocaloric materials into spheres is one of the important issues on developing high-performance magnetic refrigeration systems. In the present study, we achieved in producing spherical particles of a giant magnetocaloric compound HoB2 by a crucible-free gas atomization process, despite its high melting point of 2350 C. The particle size distribution ranges from 100 to 710 micrometers centered at 212-355 micrometers with the highest yield of 14-20wt% of total melted electrode, which is suitable for magnetic refrigeration systems. The majority of the resulting particles are mostly spherical with no contamination during the processing, while unique microstructures are observed on the surface and inside. These spherical particles exhibit sharp magnetic transitions and huge magnetic entropy change of 0.34 J cm^{-3} K^{-1} for a magnetic field change of 5 T at 15.5 K. The high sphericality and the high magnetocaloric performance suggest that the HoB2 gas-atomized particles have good potential as magnetic refrigerants for use in magnetic refrigerators for hydrogen liquefaction.

cond-mat.mtrl-sci↗

arXiv2022

Adiabatic temperature change in ErAl2/metal PIT wires: A practical method for estimating the magnetocaloric response of magnetocaloric composites

We report the adiabatic temperature change in ErAl2 magnetocaloric wires fabricated by a powder-in-tube (PIT) process. The adiabatic temperature change of the PIT wires is found to be determined by not only the volume fraction of ErAl2 core but also the magnitude relationship between the specific heat of the ErAl2 core and the metal sheath. We propose a quantitative analysis method for calculating the temperature and core volume fraction dependence of adiabatic temperature change in the PIT wire, whose formula is applicable to also various magnetocaloric composites, useful to estimate the magnetocaloric response prior to fabrication.

cond-mat.mtrl-sci↗

arXiv2022

Lattice Anharmonicity in BiS2-Based Layered Superconductor RE(O,F)BiS2 (RE = La, Ce, Pr, Nd)

We studied Grüneisen parameter (γG) to investigate lattice anharmonicity in a layered BiS2-based superconductor system REO1-xFxBiS2 (RE = La, Ce, Pr, Nd), where in-plane chemical pressure was tuned by substituting the RE elements. With increasing in-plane chemical pressure, bulk modulus remarkably increases, and a high γG is observed for RE = Nd. The dependence of γG on in-plane chemical pressure exhibits a good correlation with Tc, and a higher Tc is achieved when γG is large for RE = Nd. In addition, γG shows a slight decrease by a decrease of F concentration (x) in REO1-xFxBiS2. Our results show that the anharmonic vibration of Bi along the c-axis is present in REO1-xFxBiS2, and the enhancement of the anharmonicity is positively linked to superconducting Tc and pairing mechanisms.

cond-mat.supr-con↗

arXiv2022

High-pressure synthesis of superconducting Sn$_{3}$S$_{4}$ using diamond anvil cell with boron-doped diamond heater

High-pressure techniques open exploration of functional materials in broad research fields. An established diamond anvil cell with a boron-doped diamond heater and transport measurement terminals has performed the high-pressure synthesis of a cubic Sn$_{3}$S$_{4}$ superconductor. X-ray diffraction and Raman spectroscopy reveal that the Sn$_{3}$S$_{4}$ phase is stable in the pressure range of P>5 GPa in a decompression process. Transport measurement terminals in the diamond anvil cell detect a metallic nature and superconductivity in the synthesized Sn$_{3}$S$_{4}$ with a maximum onset transition temperature of 13.3 K at 5.6 GPa. The observed pressure-T$_{c}$ relationship is consistent with that from the first-principles calculation. The observation of superconductivity in Sn$_{3}$S$_{4}$ opens further materials exploration under high temperature and pressure conditions.

cond-mat.supr-con↗

arXiv2021

Protonation-induced discrete superconducting phases in bulk FeSe single crystals

The superconducting transition temperature, $T_{\rm{c}}$, of FeSe can be significantly enhanced several-fold by applying pressure, electron doping, intercalating spacing layer, and reducing dimensionality. Various ordered electronic phases, such as nematicity and spin density waves, have also been observed accompanying high-$T_{\rm{c}}$ superconductivity. Investigation on the evolution of the electronic structure with $T_{\rm{c}}$ is essential to understanding electronic behavior and high-$T_{\rm{c}}$ superconductivity in FeSe and its derived superconductors. In this report, we have found a series of discrete superconducting phases, with a maximum $T_{\rm{c}}$ up to 44 K, in H$^+$-intercalated FeSe single crystals using an ionic liquid gating method. Accompanied with the increase of $T_{\rm{c}}$, suppression of the nematic phase and evolution from non-Fermi-liquid to Fermi-liquid behavior was observed. An abrupt change in the Fermi surface topology was proposed to explain the discrete superconducting phases. A band structure that favors the high-$T_{\rm{c}}$ superconducting phase was also revealed.

cond-mat.supr-con↗

arXiv2021

XERUS: An open-source tool for quick XRD phase identification and refinement automation

Analysis of XRD diffraction patterns is one of the keystones of materials science and materials research. With the advancement of data-driven methods for materials design, candidate materials can be quickly screened for the study of a desired physical property. Efficient methods to automatically analyze and identify phases present in a given pattern, are paramount for the success of this new paradigm. To aid this process, the open source python package Xray Estimation and Refinement Using Similarity (XERUS) for semi-automatic/automatic phase identification is presented. XERUS takes advantages of open crystal structure databases, not relying on proprietary databases, to obtain crystal structures on the fly, being then chemical space agnostic. By wrapping around GSASII, it can automatically simulate patterns and calculate similarity measures used for phase identification. Our approach is simple and quick but also applicable to multiphase identification, by coupling the similarity calculations with quick refinements followed by an iterative peak removal process. XERUS is shown in action in four different experimental datasets and also it is benchmarked against a recently proposed deep learning method for a mixture dataset covering the Li-Mn-O-F chemical space. XERUS will be freely available on https://www.github.com/pedrobcst/Xerus/

cond-mat.mtrl-sci↗

arXiv2021

Pressure-induced superconductivity in TiGeTe$_{6}$

Layered ternary transition-metal chalcogenides have been focused as a vein of exploration for superconductors. In this study, TiGeTe$_{6}$ single crystals were synthesized and characterized by structural and valence state analyses and electrical transport measurements. The transport properties were measured under various pressures up to 71 GPa. The activation energy gets smaller as the applied pressure increases, and a signature of a pressure-induced metallization was observed under around 8.4 GPa. Under 13 GPa, pressure-induced superconductivity was discovered in this compound for the first time, with successive drops at 3 K and 6 K in the resistance, indicating the presence of multiple superconducting transitions. The superconducting transition temperature kept increasing as we further applied the pressure to the TiGeTe$_{6}$ single crystal in the performed pressure range, reaching as high as 8.1 K under 71 GPa.

cond-mat.supr-con↗

arXiv2021

SuperMat: Construction of a linked annotated dataset from superconductors-related publications

A growing number of papers are published in the area of superconducting materials science. However, novel text and data mining (TDM) processes are still needed to efficiently access and exploit this accumulated knowledge, paving the way towards data-driven materials design. Herein, we present SuperMat (Superconductor Materials), an annotated corpus of linked data derived from scientific publications on superconductors, which comprises 142 articles, 16052 entities, and 1398 links that are characterised into six categories: the names, classes, and properties of materials; links to their respective superconducting critical temperature (Tc); and parametric conditions such as applied pressure or measurement methods. The construction of SuperMat resulted from a fruitful collaboration between computer scientists and material scientists, and its high quality is ensured through validation by domain experts. The quality of the annotation guidelines was ensured by satisfactory Inter Annotator Agreement (IAA) between the annotators and the domain experts. SuperMat includes the dataset, annotation guidelines, and annotation support tools that use automatic suggestions to help minimise human errors.

cond-mat.supr-con↗

arXiv2020

THz emission from a Bi2Sr2CaCu2O8+δ cross-whisker junction

Cuprate superconductor Bi2Sr2CaCu2O8+δ (BSCCO) has been a promising candidate of a coherent, continuous, and compact THz light source owing to its intrinsic Josephson junction inside the crystal structure. In this paper, we utilized BSCCO cross-whisker junctions to produce THz emitter device using the whisker crystals which can be easily obtained compared with single crystals. As a result, we have successfully observed the emission from the cross-whisker intrinsic Josephson junction, with frequency of ~0.7 THz. Our findings might enlarge the applicability of BSCCO superconductors for the THz emission source.

cond-mat.supr-con↗

arXiv2020

Enhancement of giant refrigerant capacity in Ho$_{1-x}$Gd$_{x}$B$_{2}$ alloys (0.1 $\leq$ x $\leq$ 0.4)

Intending to optimize the giant magnetocaloric properties of HoB$_{2}$, we synthesized and magnetocalorically characterized Ho$_{1-x}$Gd$_{x}$B$_{2}$(0.1 $\leq$ x $\leq$ 0.4) alloys. We found out that Gd enters stoichiometrically and randomly into the Ho site, leading to a Vegard-type structural change. The addition of spherical S$^{7/2}$ Gd$^{3+}$ moments prompts an enhancement in Curie temperature, a reduction in peak value of the magnetic entropy change while still being relatively high, and a broadening of the magnetic entropy change curves. The overall influence is a relatively high refrigerant capacity and relative cooling power, and an extension of the thermal working range to higher temperatures; thus, electing Ho$_{1-x}$Gd$_{x}$B$_{2}$(as potential candidates for cryogenic refrigeration applications.

cond-mat.mtrl-sci↗

arXiv2020

Electrical transport measurements for superconducting sulfur hydrides using boron-doped diamond electrodes on beveled diamond anvil

A diamond anvil cell (DAC) which can generate extremely high pressure of multi-megabar is promising tool to develop a further physics such a high-transition temperature superconductivity. However, electrical transport measurements, which is one of the most important properties of such functional materials, using the DAC is quite difficult because the sample space is very small and a deformation of electrodes under extreme condition. In this study, we fabricated a boron-doped diamond micro-electrode and an undoped diamond insulation on a beveled culet surface of the diamond anvil. By using the developed DAC, we demonstrated the electrical transport measurements for sulfur hydride H$_2$S which known as a pressure-induced high-transition temperature superconducting H$_3$S at high pressure. The measurements were successfully conducted under high pressure up to 192 GPa, and then a multi-step superconducting transition composed from pure sulfur and some kinds of surfer hydrides, which is possible HS$_2$, was observed with zero resistance.

cond-mat.supr-con↗

arXiv2020

Effect of Dy substitution in the giant magnetocaloric properties of HoB$_{2}$

Recently, a massive magnetocaloric effect near the liquefaction temperature of hydrogen has been reported in the ferromagnetic material HoB$_{2}$. Here we investigate the effects of Dy substitution in the magnetocaloric properties of Ho$_{1-x}$Dy$_{x}$B$_{2}$ alloys ($\textit{x}$ = 0, 0.3, 0.5, 0.7, 1.0). We find that the Curie temperature ($\textit{T}$$_{C}$) gradually increases upon Dy substitution, while the magnitude of the magnetic entropy change |$Δ\textit{S}_{M}$| at $\textit{T}$ = $\textit{T}_{C}$ decreases from 0.35 to 0.15 J cm$^{-3}$ K$^{-1}$ for a field change of 5 T. Due to the presence of two magnetic transitions in these alloys, despite the change in the peak magnitude of |$Δ\textit{S}_{M}$|, the refrigerant capacity ($\textit{RC}$) and refrigerant cooling power ($\textit{RCP}$) remains almost constant in all doping range, which as large as 5.5 J cm$^{-3}$ and 7.0 J cm$^{-3}$ for a field change of 5 T. These results imply that this series of alloys could be an exciting candidate for magnetic refrigeration in the temperature range between 10-50 K.

cond-mat.mtrl-sci↗

arXiv2020

Demonstration of Electric Double Layer Gating under High Pressure by the Development of Field-Effect Diamond Anvil Cell

We have developed an approach to control the carrier density in various material under high pressure by the combination of an electric double layer transistor (EDLT) with a diamond anvil cell (DAC). In this study, this EDLT-DAC was applied to a Bi thin film, and here we report the field-effect under high pressure in the material. Our EDLT-DAC is a promising device for exploring unknown physical phenomena such as high transition-temperature superconductivity (HTS).

cond-mat.mtrl-sci↗

arXiv2020

Machine Learning Guided Discovery of Gigantic Magnetocaloric Effect in HoB$_{2}$ Near Hydrogen Liquefaction Temperature

Magnetic refrigeration exploits the magnetocaloric effect which is the entropy change upon application and removal of magnetic fields in materials, providing an alternate path for refrigeration other than the conventional gas cycles. While intensive research has uncovered a vast number of magnetic materials which exhibits large magnetocaloric effect, these properties for a large number of compounds still remain unknown. To explore new functional materials in this unknown space, machine learning is used as a guide for selecting materials which could exhibit large magnetocaloric effect. By this approach, HoB$_{2}$ is singled out, synthesized and its magnetocaloric properties are evaluated, leading to the experimental discovery of gigantic magnetic entropy change 40.1 J kg$^{-1}$ K$^{-1}$ (0.35 J cm$^{-3}$ K$^{-1}$) for a field change of 5 T in the vicinity of a ferromagnetic second-order phase transition with a Curie temperature of 15 K. This is the highest value reported so far, to our knowledge, near the hydrogen liquefaction temperature thus it is a highly suitable material for hydrogen liquefaction and low temperature magnetic cooling applications.

cond-mat.mtrl-sci↗

arXiv2020

Magnetic entropy change of ErAl2 magnetocaloric wires fabricated by a powder-in-tube method

We report the fabrication of ErAl2 magnetocaloric wires by a powder-in-tube method (PIT) and the evaluation of magnetic entropy change through magnetization measurements. The magnetic entropy change of ErAl2 PIT wires exhibits similar behavior to the bulk counterpart, while its magnitude is reduced by the decrease in the volume fraction of ErAl2 due to the surrounding non-magnetic sheaths. We find that another effect reduces the magnetic entropy change of the ErAl2 PIT wires around the Curie temperature, and discuss its possible origin in terms of a correlation between magnetic properties of ErAl2 and mechanical properties of sheath material.

cond-mat.mtrl-sci↗

arXiv2019

μ-PES Studies on TiNCl and Quasi-two-dimensional Superconductor Na-intercalated TiNCl

Electron-doped TiNCl is a superconductor, for which exotic mechanisms of the superconductivity have been discussed. However, difficulty in preparing large single-phase samples has prevented the direct observation of its electronic structure and how that changes with electron doping. In this study, micro-photoemission spectroscopy (μ-PES) was used to reveal the electronic structures of TiNCl and Na-intercalated TiNCl (Na-TiNCl). Comparison of Ti 2p core-level spectra shows the enhancement of a spectral feature in Na-TiNCl that suggests an increase in its metallic character. This indicates the introduction of electron carriers to the TiNCl layers. Although the overall valence band electronic structure of parent TiNCl could be reproduced by first-principle calculations, that of Na-TiNCl showed a marked deviation from the rigid band model near the Fermi level (EF). The spectral shape observed near EF of Na-TiNCl was found to be similar to a result in early transition metal oxides that has been attributed to the effect of strong electron correlation. The present study also demonstrated the usefulness of μ-PES to obtain reliable electronic structure data for samples that are difficult to make at large sizes.

cond-mat.supr-con↗