Searcharxiv⌕ Search

arXiv subjects

Kerri Cahoy

Publications and source records attributed to Kerri Cahoy.

At least 19 recordsLinked to original sources

STarlight Acquisition and Reflection toward Interferometry (STARI) mission

We introduce the NASA-funded mission STARI (STarlight Acquisition and Reflection toward Interferometry), a two-spacecraft technology demonstrator for future long-baseline interferometers. STARI will perform, to our knowledge, the first in-space transfer of starlight between free-flying spacecraft, a critical step toward long-baseline space interferometry. Two propulsive 8U CubeSats in low Earth orbit will fly in formation with separations up to 200 m: one relays a narrow stellar beam to the other, where an off-axis parabola reimages it into a single-mode fiber. Using differential GNSS, visible LED beacons, and fast-steering mirrors in closed-loop control, we aim to sustain diffraction-limited, high-throughput fiber coupling during formation flight. STARI, targeting launch in 2029, is designed to mature key technologies needed for future mission concepts such as the Large Interferometer for Exoplanets (LIFE), which would seek atmospheric biomarkers on nearby Earth-like exoplanets.

astro-ph.IM↗

A Modular Open-Source Python Framework for Small Satellite Attitude Determination and Control

Advanced attitude determination and control (ADCS) techniques can be difficult for small satellite teams to adopt: tightly coupled implementations require substantial code changes to evaluate different actuators, sensors, orbits, mission goals, and control laws. Existing tools often emphasize orbit mechanics or flight software rather than closed-loop ADCS. This paper presents an open-source, modular ADCS framework in pure Python for rapid development, repeatable testing, and flight-oriented integration across heterogeneous spacecraft. The package supports torque- and command-level control, bound-respecting allocation, and full- and reduced-attitude objectives. Interchangeable estimation, control, planning, and actuator/sensor modules are reconfigured through configuration changes. Integrated simulation includes attitude and orbit propagation, sensor and actuator bias and noise, and environmental disturbances. An actuator-aware planner supports underactuated architectures, while hardware-in-the-loop (HIL) capability enables testing on mission-representative computers. Case studies include a 3U CubeSat with three magnetorquers and one reaction wheel, a magnetorquer-only 1U, and a 6U with three reaction wheels and thrusters. These demonstrate actuator and sensor failures, full- and reduced-attitude goals, and momentum management. HIL testing on a Raspberry Pi uses the same package. Adapting a published control law to a new actuator configuration requires fewer than five lines of configuration changes. The framework underpins flight software for an Earth-observing CubeSat with visible and long-wave infrared imagers, three magnetorquers, and one reaction wheel, without star trackers or propulsion.

eess.SY↗

Trajectory-Planning Attitude Control System for Satellites with Magnetic Attitude Control and One Reaction Wheel

Selecting attitude actuators for spacecraft in low earth orbit (LEO) often involves a trade between reaction wheels and magnetorquers. Reaction wheels generally have higher size, weight and power as well as cost, compared with magnetorquers, but have performance advantages. We consider a hybrid system relying on a single reaction wheel and three magnetorquers, using a trajectory planning control method that focuses on meeting pointing goals and minimizing the need to desaturate the reaction wheel. The use of planning allows for intelligent use of the reaction wheel and accommodates time-changing goals and orbit-varying magnetic fields. Preliminary results show trajectories with fractional-degree-accuracy, as well as management of reaction wheel momentum and avoidance of stiction. We also compare to a magnetorquer-only planning-based control system and show better convergence and faster slews.

math.OC↗

Focal plane modal estimation of high-order wavefront drifts on coronagraphic testbeds

The upcoming Habitable Worlds Observatory (HWO) requires precise wavefront stability over long observation periods to directly image Exo-Earths, which are 10 orders of magnitude dimmer than their host star. Dark zone maintenance (DZM) has been proposed as a focal plane high-order wavefront sensing and control (HOWFSC) strategy to mitigate thermal and mechanical instabilities that cause slow-evolving high-order wavefront drifts, which ultimately degrade contrast. Here we present a modal dark zone maintenance (MDZM) algorithm that uses an Extended Kalman Filter (EKF) to estimate the drifting wavefront modes in the basis of the deformable mirror (DM) actuators used for control. The estimator derives information across the entire focal plane from probe-pair images, addressing deficiencies of DZM, and directly obtains a DM command, eliminating the need for Electric Field Conjugation (EFC) and its regularization parameter. MDZM has been demonstrated in simulation and in hardware on the Decadal Survey Testbed (DST) at NASA JPL. These experiments have maintained a normalized intensity (NI) of $\sim 3 \times 10^{-10}$ for over 36 hours, and have reduced the gap to the photon-derived theoretical bounds compared to DZM. MDZM also provides an estimate of naturally occurring drift on the testbed, offering potential system identification capabilities. To evaluate the robustness of MDZM, a parameter scan is conducted on DST, spanning exposure times and drift rates. Additionally, realistic observing scenarios for HWO will involve broadband images with a 20% bandwidth, rather than the 2.5% narrowband images previously used in MDZM testbed demonstrations. Therefore, we tested MDZM in simulation using broadband sensing images with a 10% bandwidth, using the FALCO software package with a model based on DST, and compared its performance against MDZM runs using narrowband images.

astro-ph.IM↗

Modal estimation of high-order wavefront drifts on coronagraphic testbeds for high-contrast direct imaging of exoplanets

Long-term wavefront stability will be critical for the upcoming Habitable Worlds Observatory which aims to directly image exo-Earths. Mechanical and thermal instabilities induce slow, high-order wavefront errors which can degrade the contrast and in turn, the scientific yield of the observatory. Dark zone maintenance (DZM) has been proposed as a high-order wavefront sensing and control strategy to maintain contrast despite wavefront error drifts. This approach uses an Extended Kalman Filter (EKF) to estimate the electric field at each pixel in the dark zone of the science camera. However, relying on individual pixel information to estimate wavefront errors can discard information stored in the underlying wavefront. This is a fundamental limitation on the best achieved contrast compared to the model based theoretical bounds derived from photon noise. An alternative EKF can incorporate more holistic information by estimating the drifting wavefront modes present in the system. In this work we analyze the performance of this Modal EKF on the High-contrast Imager for Complex Aperture Telescopes (HiCAT) simulator at the Space Telescope Science Institute. A parameter scan is performed across key variables: deformable mirror (DM) drift, the direct photon rate at the telescope aperture governing the mean number of photons in the dark zone (DZ), and the dither magnitude used to provide phase diversity. While prior studies explored a range of dither magnitudes, this work introduces a covariance-based approach within the Extended Kalman Filter (EKF) framework to optimally determine the probe magnitude required. Results from the modal EKF demonstrate a 15-fold improvement in contrast relative to the single-pixel DZM experiments, reducing the gap to within a factor of 2-3 of the theoretical bounds.

astro-ph.IM↗

A Multi-Agent Feedback System for Detecting and Describing News Events in Satellite Imagery

Changes in satellite imagery often occur over multiple time steps. Despite the emergence of bi-temporal change captioning datasets, there is a lack of multi-temporal event captioning datasets (at least two images per sequence) in remote sensing. This gap exists because (1) searching for visible events in satellite imagery and (2) labeling multi-temporal sequences require significant time and labor. To address these challenges, we present SkyScraper, an iterative multi-agent workflow that geocodes news articles and synthesizes captions for corresponding satellite image sequences. Our experiments show that SkyScraper successfully finds 5x more events than traditional geocoding methods, demonstrating that agentic feedback is an effective strategy for surfacing new multi-temporal events in satellite imagery. We apply our framework to a large database of global news articles, curating a new multi-temporal captioning dataset with 5,000 sequences. By automatically identifying imagery related to news events, our work also supports journalism and reporting efforts.

cs.CV↗

Differentiable Satellite Constellation Configuration via Relaxed Coverage and Revisit Objectives

Satellite constellation design requires optimizing orbital parameters across multiple satellites to maximize mission specific metrics. For many types of mission, it is desirable to maximize coverage and minimize revisit gaps over ground targets. Existing approaches to constellation design either restrict the design space to symmetric parametric families such as Walker constellations, or rely on metaheuristic methods that require significant compute and many iterations. Gradient-based optimization has been considered intractable due to the non-differentiability of coverage and revisit metrics, which involve binary visibility indicators and discrete max operations. We introduce four continuous relaxations: soft sigmoid visibility, noisy-OR multi-satellite aggregation, leaky integrator revisit gap tracking, and LogSumExp soft-maximum, which when composed with the $\partial$SGP4 differentiable orbit propagator, yield a fully differentiable pipeline from orbital elements to mission-level objectives. We show that this scheme can recover Walker-Delta geometry from irregular initializations, and discovers elliptical Molniya-like orbits with apogee dwell over extreme latitudes from only gradients. Compared to simulated annealing (SA), genetic algorithm (GA), and differential evolution (DE) baselines, our gradient-based method recovers Walker-equivalent geometry within ${\sim}750$ evaluations, whereas the three black-box baselines plateau at with significantly worse revisit even with roughly four times the evaluation budget.

cs.RO↗

Leveraging Photometry for Deconfusion of Directly Imaged Multi-Planet Systems

Future missions, including the Habitable Worlds Observatory, will aim to image Earth-like exoplanets around Sun-like stars in reflected light. Determining whether an exoplanet is in the habitable zone of its star may be difficult in multi-planet systems when the observer does not know in advance which detection corresponds to which planet. This "confusion" problem will be a concern for future missions due to the high occurrence rate of multi-planet systems, and will be exacerbated by lack of prior knowledge about planets' orbital parameters or characteristics. We address the exoplanet confusion problem by applying a photometry model to update an orbit ranking scheme for a "deconfuser" tool . This helps to account for phase variation of planets throughout their orbits. We demonstrate the updated ranking scheme as a proof-of-concept on a subset of known to be confused simulated multi-planet systems among three inclination groupings (low, medium, and high). We find that incorporating photometry improves correctly interpreting previously confused orbits in more than half of these particularly challenging cases. These results emphasize that photometry is useful for orbit discrimination and deconfusion of directly imaged multi-planet systems, providing a framework for including photometry alongside astrometry when fitting orbits to detections.

astro-ph.EP↗

SATMO: a Multi-Planet Thermal Analysis Tool for CubeSat Missions

The expansion of commercial launch capabilities has significantly increased opportunities for interplanetary small satellite (SmallSat) missions. As researchers plan for more missions beyond Earth, there is a demand for accessible tools that help better predict and understand the thermal effects on their spacecraft in orbital environments around Earth and other bodies. While commercial thermal analysis tools offer high-fidelity modeling capabilities and results, they are often expensive and require extensive training to be used effectively. This paper details a framework for a user-friendly Satellite Thermal Model (SATMO) to support the early stages of space mission planning for CubeSats orbiting Earth and other Solar System bodies. SATMO is an open-source, MATLAB-based, six-node thermal analysis program designed for satellites in low-altitude circular orbits. Although SATMO requires a MATLAB license -- typically inexpensive or institutionally provided in academic settings -- it remains substantially more accessible than professional thermal analysis software. SATMO requires an internet connection for some features but does not rely on additional MATLAB toolboxes. The SATMO modeling approach is validated with the space industry standard Thermal Desktop software, with temperatures comparable to within 1.17$^\circ$C for a 10 cm $\times$ 10 cm $\times$ 10 cm CubeSat in various configurations, orbiting around primary bodies including Earth, Venus, and Mars. An example use case of SATMO is presented with a Mars-orbiting CubeSat to demonstrate its functionalities and the outputs available to users. SATMO offers increased accessibility to satellite thermal modeling for the research community, enabling quick thermal trade studies and interplanetary mission plans.

astro-ph.IM↗

A parameter scan of dark zone maintenance for high-contrast imaging of exoplanets using theoretical and experimental implementations

Maintaining wavefront stability while directly imaging exoplanets over long exposure times is an ongoing problem in the field of high-contrast imaging. Robust and efficient high-order wavefront sensing and control systems are required for maintaining wavefront stability to counteract mechanical and thermal instabilities. Dark zone maintenance (DZM) has been proposed to address quasi-static optical aberrations and maintain high levels of contrast for coronagraphic space telescopes. To further experimentally test this approach for future missions, such as the Habitable Worlds Observatory, this paper quantifies the differences between the theoretical closed-loop contrast bounds and DZM performance on the High-contrast Imager for Complex Aperture Telescopes(HiCAT) testbed. The quantification of DZM is achieved by traversing important parameters of the system, specifically the total direct photon rate entering the aperture of the instrument, ranging from $1.85 \times 10^6$ to $1.85 \times 10^8$ photons per second, and the wavefront error drift rate, ranging from $σ_{drift}$ = 0.3 - 3 $nm/\sqrt{iteration}$, injected via the deformable mirror actuators. This is tested on the HiCAT testbed by injecting random walk drifts using two Boston Micromachines kilo deformable mirrors (DMs). The parameter scan is run on the HiCAT simulator and the HiCAT testbed where the corresponding results are compared to the model-based theoretical contrast bounds to analyze discrepancies. The results indicate an approximate one and a half order of magnitude difference between the theoretical bounds and testbed results.

astro-ph.IM↗

Measuring and Mitigating Hallucinations in Vision-Language Dataset Generation for Remote Sensing

Vision language models have achieved impressive results across various fields. However, adoption in remote sensing remains limited, largely due to the scarcity of paired image-text data. To bridge this gap, synthetic caption generation has gained interest, traditionally relying on rule-based methods that use metadata or bounding boxes. While these approaches provide some description, they often lack the depth needed to capture complex wide-area scenes. Large language models (LLMs) offer a promising alternative for generating more descriptive captions, yet they can produce generic outputs and are prone to hallucination. In this paper, we propose a new method to enhance vision-language datasets for remote sensing by integrating maps as external data sources, enabling the generation of detailed, context-rich captions. Additionally, we present methods to measure and mitigate hallucinations in LLM-generated text. We introduce fMoW-mm, a multimodal dataset incorporating satellite imagery, maps, metadata, and text annotations. We demonstrate its effectiveness for automatic target recognition in few-shot settings, achieving superior performance compared to other vision-language remote sensing datasets.

cs.CV↗

STARI: STarlight Acquisition and Reflection toward Interferometry

We present the concept for STARI: STarlight Acquisition and Reflection toward Interferometry. If launched, STARI will be the first mission to control a 3-D CubeSat formation to the few mm-level, reflect starlight over 10s to 100s of meters from one spacecraft to another, control tip-tilt with sub-arcsecond stability, and validate end-to-end performance by injecting light into a single-mode fiber. While STARI is not an interferometer, the mission will advance the Technology Readiness Levels of the essential subsystems needed for a space interferometer in the near future.

astro-ph.IM↗

Optical modeling for the evaluation of HOWFSC on embedded processors

The correction of quasi-static wavefront errors within a coronagraphic optical system will be a key challenge to overcome in order to directly image exoplanets in reflected light. These quasi-static errors are caused by mid to high-order surface errors on the optical elements as a result of manufacturing processes. Using high-order wavefront sensing and control (HOWFSC) techniques that do not introduce non-common path aberrations, the quasi-static errors can be corrected within the desired region of interest designated as the dark hole. For the future Habitable Worlds Observatory (HWO), HOWFSC algorithms will be key to attaining the desired contrasts. To simulate the performance of HOWFSC with space rated processors, optical models for a 6 m class space-borne observatory and a coronagraph have been developed. Phenomena such as the Talbot effect and beamwalk are included in the simulations using combinations of ray-based modeling and end-to-end propagation techniques. After integrating the optical models with the embedded processors, simulations with realistic computation times can be performed to understand the computational hardware performance that will be needed to maintain the desired contrasts. Here, the details of the optical models are presented along with the HOWFSC methods utilized. Initial results of the HOWFSC methods are also included as a demonstration of how system drifts will degrade the contrast and require dark hole maintenance.

astro-ph.IM↗

The AEROS ocean observation mission and its CubeSat pathfinder

AEROS aims to develop a nanosatellite as a precursor of a future system of systems, which will include assets and capabilities of both new and existing platforms operating in the Ocean and Space, equipped with state-of-the-art sensors and technologies, all connected through a communication network linked to a data gathering, processing and dissemination system. This constellation leverages scientific and economic synergies emerging from New Space and the opportunities in prospecting, monitoring, and valuing the Ocean in a sustainable manner, addressing the demand for improved spatial, temporal, and spectral coverage in areas such as coastal ecosystems management and climate change assessment and mitigation. Currently, novel sensors and systems, including a miniaturized hyperspectral imager and a flexible software-defined communication system, are being developed and integrated into a new versatile satellite structure, supported by an innovative on-board software. Additional sensors, like the LoRaWAN protocol and a wider field of view RGB camera, are under study. To cope with data needs, a Data Analysis Centre, including a cloud-based data and telemetry dashboard and a back-end layer, to receive and process acquired and ingested data, is being implemented to provide tailored-to-use remote sensing products for a wide range of applications for private and institutional stakeholders.

physics.ao-ph↗

AEROS: Oceanographic Hyperspectral Imaging and Argos-Tracking CubeSat

AEROS is a 3U CubeSat pathfinder toward a future ocean-observing constellation, targeting the Portuguese Atlantic region. AEROS features a miniaturized, high-resolution Hyperspectral Imager (HSI), a 5MP RGB camera, and a Software Defined Radio (SDR). The sensor generated data will be processed and aggregated for end-users in a new web-based Data Analysis Center (DAC). The HSI has 150 spectrally contiguous bands covering visible to near-infrared with 10 nm bandwidth. The HSI collects ocean color data to support studies of oceanographic characteristics known to influence the spatio-temporal distribution and movement behavior of marine organisms. Usage of an SDR expands AEROS's operational and communication range and allows for remote reconfiguration. The SDR receives, demodulates, and retransmits short duration messages, from sources including tagged marine organisms, autonomous vehicles, subsurface floats, and buoys. The future DAC will collect, store, process, and analyze acquired data, taking advantage of its ability to disseminate data across the stakeholders and the scientific network. Correlation of animal-borne Argos platform locations and oceanographic data will advance fisheries management, ecosystem-based management, monitoring of marine protected areas, and bio-oceanographic research in the face of a rapidly changing environment. For example, correlation of oceanographic data collected by the HSI, geolocated with supplementary images from the RGB camera and fish locations, will provide researchers with near real-time estimates of essential oceanographic variables within areas selected by species of interest.

physics.ao-ph↗

Information-theoretical Limits of Recursive Estimation and Closed-loop Control in High-contrast Imaging

A lower bound on unbiased estimates of wavefront errors (WFE) is presented for the linear regime of small perturbation and active control of a high-contrast region (dark hole). Analytical approximations and algorithms for computing the closed-loop covariance of the WFE modes are provided for discrete- and continuous-time linear WFE dynamics. Our analysis applies to both image-plane and non-common-path wavefront sensing (WFS) with Poisson-distributed measurements and noise sources (i.e., photon-counting mode). Under this assumption, we show that recursive estimation benefits from infinitesimally short exposure times, is more accurate than batch estimation and, for high-order WFE drift dynamical processes, scales better than batch estimation with amplitude and star brightness. These newly-derived contrast scaling laws are a generalization of previously known theoretical and numerical results for turbulence-driven Adaptive Optics. For space-based coronagraphs, we propose a scheme for combining models of WFE drift, low-order non-common-path WFS (LOWFS) and high-order image-plane WFS (HOWFS) into closed-loop contrast estimates. We also analyze the impact of residual low-order WFE, sensor noise, and other sources incoherent with the star, on closed-loop dark-hole maintenance and the resulting contrast. As an application example, our model suggests that the Roman Space Telescope might operate in a regime that is dominated by incoherent sources rather than WFE drift, where the WFE drift can be actively rejected throughout the observations with residuals significantly dimmer than the incoherent sources. The models proposed in this paper make possible the assessment of the closed-loop contrast of coronagraphs with combined LOWFS and HOWFS capabilities, and thus help estimate WFE stability requirements of future instruments.

astro-ph.IM↗

The Versatile CubeSat Telescope: Going to Large Apertures in Small Spacecraft

The design of a CubeSat telescope for academic research purposes must balance complicated optical and structural designs with cost to maximize performance in extreme environments. Increasing the CubeSat size (eg. 6U to 12U) will increase the potential optical performance, but the cost will increase in kind. Recent developments in diamond-turning have increased the accessibility of aspheric aluminum mirrors, enabling a cost-effective regime of well-corrected nanosatellite telescopes. We present an all-aluminum versatile CubeSat telescope (VCT) platform that optimizes performance, cost, and schedule at a relatively large 95 mm aperture and 0.4 degree diffraction limited full field of view stablized by MEMS fine-steering modules. This study features a new design tool that permits easy characterization of performance degradation as a function of spacecraft thermal and structural disturbances. We will present details including the trade between on- and off-axis implementations of the VCT, thermal stability requirements and finite-element analysis, and launch survival considerations. The VCT is suitable for a range of CubeSat borne applications, which provides an affordable platform for astronomy, Earth-imaging, and optical communications.

astro-ph.IM↗

Point Source Localization with a Planar Optical Phased Array Compressive Sensor

Compressive sensing has been used to demonstrate scene reconstruction and source localization in a wide variety of devices. To date, optical compressive sensors have not been able to achieve significant volume reduction relative to conventional optics of equivalent angular resolution. Here, we adapt silicon-photonic optical phased array technology to demonstrate, to our knowledge, the first application of compressive imaging in a photonic-integrated device. Our novel sensor consists of an $8\times 8$ grid of grating couplers with a spacing of $100~μ$m. Path-matched waveguides route to a single multimode interferometer (MMI), which mixes and randomizes the signals into 64 outputs to be used for compressed sensing. Our device is fully passive, having no need for phase shifters, as measurement matrix calibration makes the measurements robust to phase errors. For testing, we use an Amplified Spontaneous Emission (ASE) source with a bandwidth of 40 nm, centered at 1545 nm. We demonstrate simultaneous multi-point (2 sources demonstrated in this work) brightness recovery and localization with better than 10 arcsecond precision in a sub-millimeter thick form-factor. We achieve a single source recovery rate higher than 99.9\% using 10 of the 64 outputs, and a 90\% recovery rate with only 6 outputs, 10 times fewer than the 64 needed for conventional imaging. This planar optical phased array compressive sensor is well-suited for imaging sparse scenes in applications constrained by form factor, volume, or high-cost detectors, with the potential to revolutionize endoscopy, beam locators, and LIDAR.

physics.app-ph↗