arXiv subjects

Kerrianne Harrington

Publications and source records attributed to Kerrianne Harrington.

14 recordsLinked to original sources

arXiv2025

Tunable megawatt-scale sub-20 fs visible pulses from a fiber laser source

Ultrafast laser pulses that are both tunable in wavelength and very short in duration are essential tools in fields ranging from biomedical imaging to ultrafast spectroscopy. While resonant dispersive-wave emission in gas-filled hollow-core fibers is a powerful technique for generating such pulses, it has traditionally required complex and expensive pump laser systems. In this work, we present a more compact and accessible alternative that combines gain-managed nonlinear amplification with resonant dispersive-wave emission. Our system produces sub-20 femtosecond pulses tunable from 400 nm to beyond 700 nm, with energies up to 39 nJ and peak powers exceeding 2 MW, operating at a 4.8 MHz repetition rate. This compact and efficient laser source opens new avenues for deploying resonant dispersive-wave-based technologies for broader scientific and industrial applications.

physics.optics↗

arXiv2025

Highly multi-mode anti-resonant hollow core fibres

We report the characterisation of anti-resonant hollow core optical fibres guiding at least 50 spatial modes in the infrared. Their propagation losses were measured to be between 0.1 and 0.2 dB/m from 1000 to 1500 nm wavelength, with bend losses of less than 3 dB/turn for bend radii of 7.5 cm despite core radii greater than 60 times the guided wavelengths.

physics.optics↗

arXiv2024

Resonance-free deep ultraviolet to near infrared supercontinuum generation in a hollow-core antiresonant fibre

Supercontinuum generation in the ultraviolet spectral region is challenging in solid-core optical fibres due to solarization and photodarkening. Antiresonant hollow-core fibres have overcome this limitation and have been shown to guide ultraviolet light at sufficient intensity for ultraviolet spectral broadening through nonlinear optics in the filling gas. However, their ultraviolet guidance is usually limited by discontinuities caused by the presence of high-loss resonance bands. In this paper, we report on resonance-free supercontinuum generation spanning from the deep ultraviolet to the near infrared achieved through modulation instability in an argon-filled antiresonant hollow-core fibre. The fibre was directly fabricated using the stack-and-draw method with a wall thickness of approximately 90 nm, enabling continuous spectral coverage from the deep ultraviolet to the near infrared. We also report numerical simulations to investigate the supercontinuum bandwidth and the factors limiting it, finding that the overall dispersion landscape, and associated group-velocity matching of cross-phase modulation interactions, is the dominant constraint on spectral extension.

physics.optics↗

arXiv2024

Multi-core anti-resonant hollow core fibre

We report the fabrication and characterisation of a multi-core anti-resonant hollow core fibre with low inter-core coupling. The optical losses were 0.03 and 0.08 dB/m at 620 and 1000 nm respectively, while the novel structure provides new insights into hollow core fibre design and fabrication.

physics.optics↗

arXiv2024

Optical absorption spectrum reveals gaseous chlorine in anti-resonant hollow core fibres

We have observed unexpected spectral attenuation of ultraviolet light in freshly drawn hollow core optical fibres. When the fibre ends are left open to atmosphere, this loss feature dissipates over time. The loss matches the absorption spectrum of gaseous (molecular) chlorine and, given enough time, the transmission spectrum of the fibre recovers to that expected from the morphological structure of the fibre. Our measurements indicate an initial chlorine concentration of 0.45 $μ$ mol/cm$^{3}$ in the hollow core, equivalent to 1.1 mol% Cl$_{2}$ at atmospheric pressure.

physics.optics↗

arXiv2024

Microstructured optical fibres for quantum applications: perspective

Recent progress in the development and applications of microstructured optical fibres for quantum technologies is summarised. The optical nonlinearity of solid-core and gas-filled hollow-core fibres provides a valuable medium for the generation of quantum resource states, as well as for quantum frequency conversion between the operating wavelengths of existing quantum photonic material architectures. The low loss, low latency and low dispersion of hollow-core fibres make these fibres particularly attractive for both short- and long-distance links in quantum networks. Hollow-core fibres also promise to replace free-space optical components in a wide range of atomic experiments.

quant-ph↗

arXiv2024

Guidance of ultraviolet light down to 190 nm in a hollow-core optical fibre

We report an anti-resonant hollow core fibre with ultraviolet transmission down to 190 nm, covering the entire UV-A, UV-B and much of the UV-C band. Guidance from 190 - 400 nm is achieved apart for a narrow high loss resonance band at 245 - 265 nm. The minimum attenuation is 0.13 dB/m at 235 nm and 0.16 dB/m at 325 nm. With an inscribed core diameter of ~ 12 $μ$m, the fibre's bend loss at 325 nm was 0.22 dB per turn for a bend radius of 3 cm at 325 nm.

physics.optics↗

arXiv2024

Low-loss, compact, fibre-integrated cell for quantum memories

We present a low-loss, compact, hollow core optical fibre (HCF) cell integrated with single mode fibre (SMF). The cell is designed to be filled with atomic vapour and used as a component in photonic quantum technologies, with applications in quantum memory and optical switching. We achieve a total insertion loss of 0.6(2) dB at 780 nm wavelength via graded index fibre to ensure efficient mode matching coupled with anti-reflection coatings to minimise loss at the SMF-HCF interfaces. We also present numerical modelling of these interfaces, which can be undertaken efficiently without the need for finite element simulation. We encapsulate the HCF core by coupling to the SMF inside a support capillary, enhancing durability and facilitating seamless integration into existing fibre platforms.

quant-ph↗

arXiv2023

Controlling and scripting laboratory hardware with open-source, intuitive interfaces: OpenFlexure Voice Control and OpenFlexure Blockly

Making user interaction with laboratory equipment more convenient and intuitive should promote experimental work and help researchers to complete their tasks efficiently. The most common form of interaction in current instrumentation is either direct tactile, with buttons and knobs, or interfaced through a computer, using a mouse and keyboard. Scripting is another function typical of smart and automated laboratory equipment, yet users are currently required to learn bespoke programming languages and libraries for individual pieces of equipment. In this paper, we present two open-source, novel and intuitive ways of interacting with and scripting laboratory equipment. We choose the OpenFlexure family of microscopes as our exemplar, due to their open-source nature and smart control system. Firstly, we demonstrate 'OpenFlexure Voice Control' to enable users to control the microscope hands-free. Secondly, we present 'OpenFlexure Blockly' which uses the Blockly Visual Programming Language to enable users to easily create scripts for the microscope, using a drag and drop web interface. We explain the design choices when developing these tools, and discuss more typical use cases and more general applications.

physics.ins-det↗

arXiv2022

All-fibre wavefront sensor

We report on a tapered three-core optical fibre that can be used as a tip-tilt wavefront sensor. In this device, a coupled region of a few millimetres at the sensing tip of the fibre converts fragile phase information from an incoming wavefront into robust intensity information within each of the cores. The intensity information can be easily converted to linear wavefront error over small ranges, making it ideal for closed loop systems. The sensor uses minimal information to infer tip-tilt and is compatible with remote detector arrays. We explore its application within adaptive optics and present a validation case to show its applicability to astronomy.

astro-ph.IM↗

arXiv2022

DV-QKD Coexistence With 1.6 Tbps Classical Channels Over Hollow Core Fibre

The feasibility of coexisting a quantum channel with carrier-grade classical optical channels over Hollow Core Nested Antiresonant Nodeless Fibre (HC-NANF) is experimentally explored for the first time in terms of achievable quantum bit error rate (QBER), secret key rate (SKR) as well as classical signal bit error rates (BER). A coexistence transmission of 1.6 Tbps is achieved for the classical channels simultaneously with a quantum channel over a 2 km-long HC-NANF with a total coexistence power of 0 dBm. To find the best and worst wavelength position for the classical channels, we simulated different classical channels bands with different spacing between the quantum and classical channels considering the crosstalk generated from both Raman scattering and four-wave-mixing (FWM) on the quantum channel. Following our simulation, we numerically estimate the best (Raman spectrum dip) and worst locations (Raman spectrum peak) of the classical channel with respect to its impact on the performance on the quantum channel in terms of SKR and QBER. We further implemented a testbed to experimentally test both single mode fibre (SMF) and HC-NANF in the best and worst-case scenarios. In the best-case scenario, the spacing between quantum and classical is 200 GHz (1.6 nm) with 50 GHz (0.4 nm) spacing between each classical channel. The SKR was preserved without any noticeable changes when coexisting the quantum channel with eight classical channels at 0 dBm total coexistence power in HC-NANF compared to a significant drop of 73% when using SMF at -24 dBm total coexistence power which is 250 times lower than the power used in HC-NANF. In the worst-case scenario using the same powers, and with 1 THz (8 nm) spacing between quantum and classical channels, the SKR dropped 10% using the HC-NANF, whereas in the SMF the SKR plummeted to zero.

quant-ph↗

arXiv2020

Focal-ratio-degradation (FRD) mitigation in a multimode fiber link using mode-selective photonic lanterns

We present a new way to mitigate focal-ratio degradation (FRD) when using optical fibers to transport multimode light. Our approach exploits a custom multicore fiber (MCF) with six dissimilar cores that are single mode at ~1550 nm wavelength and minimally coupled over 7 m. We fabricated adiabatic mode-selective photonic lanterns (PLs) at each end of the MCF to create a fiber link with multimode ports, the PLs coupling each spatial mode of the multimode ports to a specific core of the MCF and vice versa. The PL-MCF-PL link exhibits superior FRD behavior compared to a conventional multimode fiber that also supports 6 modes, because it inhibits the transfer of light from lower-order modes to higher-order modes. These results open up a potentially powerful new approach to mitigate FRD in multimode fiber links, with particular applications in astronomical instruments.

physics.optics↗

arXiv2019

The OpenFlexure Block Stage: Sub-100 nm fibre alignment with a monolithic plastic flexure stage

As 3D printers become more widely available, researchers are able to rapidly produce components that may have previously taken weeks to have machined. The resulting plastic components, having high surface roughness, are often not suitable for high-precision optomechanics. However, by playing to the strengths of 3D printing---namely the ability to print complex internal geometries---it is possible to design monolithic mechanisms that do not rely on tight integration of high-precision parts. Here we present a motorised monolithic 3D-printed plastic flexure stage with sub-100 nm resolution, that can perform automated optical fibre alignment.

physics.ins-det↗

arXiv2018

High fidelity fibre-based physiological sensing deep in tissue

Physiological sensing deep in tissue, remains a clinical challenge. Here a flexible miniaturised sensing optrode providing a platform to perform minimally invasive in vivo in situ measurements is reported. Silica microspheres covalently coupled with a high density of ratiometrically configured fluorophores were deposited into etched pits on the distal end of a 150 micron diameter multicore optical fibre. With this platform, multiplexed photonic measurements of pH and oxygen concentration with high precision in the distal alveolar space of the lung is reported. We demonstrated the phenomenon that high-density deposition of carboxyfluorescein covalently coupled to silica microspheres shows an inverse shift in fluorescence in response to varying pH. This platform delivered fast and accurate measurements, near instantaneous response time, no photobleaching, immunity to power fluctuations and a flexible architecture for addition of multiple sensors.

physics.med-ph↗