Searcharxiv⌕ Search

arXiv subjects

Keumkyung Kuk

Publications and source records attributed to Keumkyung Kuk.

4 recordsLinked to original sources

Model-free stiffness measurement of microscale soft contacts by far-field traction force microscopy

The microscale stiffness of soft materials governs their contact mechanics, adhesion and friction, yet it is surprisingly difficult to measure. Micro or nanoindentation is typically used, but extracting stiffness from these measurements requires using contact mechanics models (e.g. JKR), whose assumptions often break down for soft adhesive contacts. Here, we introduce far-field traction force microscopy (FF-TFM) to extract stiffness without using any contact model. We drag a colloidal probe mounted on an atomic-force microscope across a soft surface, measuring the friction force while imaging the displacements of fluorescent tracers on the substrate. Far from the contact, in the elastic limit, these lateral displacements depend solely on the friction force and the substrate stiffness, and fitting them with the point-force solution thus gives the substrate's Young's modulus directly. We successfully match bulk rheology moduli with FF-TFM for six different silicone elastomers, where JKR fits to indentation data underestimate moduli by as much as 40\% of their bulk values. Our approach also enables tracking how the probe slips across the surface. We find that soft contacts can "pre-slip" with no detectable signature in the force signal, unlike stiffer contacts. FF-TFM thus offers a contact-model-free route to measuring microscale stiffness and slip behavior in soft materials.

cond-mat.soft↗

Drying of Soft Colloidal Films

Thin films made of deformable micro- and nano-units, such as biological membranes, polymer interfaces, and particle-laden liquid surfaces, exhibit a complex behavior during drying, with consequences for various applications like wound healing, coating technologies, and additive manufacturing. Studying the drying dynamics and structural changes of soft colloidal films thus holds the potential to yield valuable insights to achieve improvements for applications. In this study, we employ interfacial monolayers of core-shell microgels with varying degrees of softness as model systems and investigate their drying behavior on differently modified solid substrates (hydrophobic vs. hydrophilic). By leveraging on video microscopy, particle tracking, and thin film interference, we shed light on the interplay between microgel adhesion to solid surfaces and the immersion capillary forces that arise in the thin liquid film. We discovered that a dried replica of the interfacial microstructure can be more accurately achieved on a hydrophobic substrate relative to a hydrophilic one, particularly when employing softer colloids as opposed to harder counterparts. These observations are qualitatively supported by experiments with a thin film pressure balance which allows mimicking and controlling the drying process and by computer simulations with coarse-grained models.

cond-mat.soft↗

Compression of colloidal monolayers at liquid interfaces: in situ vs. ex situ investigation

The assembly of colloidal particles at liquid/liquid or air/liquid interfaces is a versatile procedure to create microstructured monolayers and study their behavior under compression. When combined with soft and deformable particles such as microgels, compression is used to tune not only the interparticle distance but also the underlying microstructure of the monolayer. So far, the great majority of studies on microgel-laden interfaces is conducted ex situ after transfer to solid substrates, for example, via Langmuir-Blodgett deposition. This type of analysis relies on the stringent assumption that the microstructure is conserved during transfer and subsequent drying. In this work, we couple a Langmuir trough to a custom-built small-angle light scattering setup to monitor colloidal monolayers in situ during compression. By comparing the results with ex situ and in situ microscopy measurements, we conclude that Langmuir-Blodgett deposition can alter the structural properties of the colloidal monolayers significantly.

cond-mat.soft↗

Micron-sized silica-PNIPAM core-shell microgels with tunable shell-to-core ratio

Micron-sized hard core-soft shell hybrid microgels are promising model systems for studies of soft matter as they enable in-situ optical investigations and their structures/morphologies can be engineered with a great variety. Yet, protocols that yield micron-sized core-shell microgels with a tailorable shell-to-core size ratio are rarely available. In this work, we report on the one-pot synthesis protocol for micron-sized silica-poly(N-isopropylacrylamide) core-shell microgels that has excellent control over the shell-to-core ratio. Small-angle light scattering and microscopy of 2- and 3-dimensional assemblies of the synthesized microgels confirm that the produced microgels are monodisperse and suitable for optical investigation even at high packing fractions.

cond-mat.soft↗