arXiv subjects

Keunhan Park

Publications and source records attributed to Keunhan Park.

8 recordsLinked to original sources

arXiv2022

Role of Acoustic Phonon Transport in Near- to Asperity-Contact Heat Transfer

Acoustic phonon transport is revealed as a potential radiation-to-conduction transition mechanism for single-digit nanometer vacuum gaps. To show this, we measure heat transfer from a feedback-controlled platinum nanoheater to a laterally oscillating silicon tip as the tip-nanoheater vacuum gap distance is precisely controlled from a single-digit nanometer down to bulk contact in a high-vacuum shear force microscope. The measured thermal conductance shows a gap dependence of $d^{-5.7\pm1.1}$ in the near-contact regime, which is in good agreement with acoustic phonon transport modeling based on the atomistic Green's function framework. The obtained experimental and theoretical results suggest that acoustic phonon transport across a nanoscale vacuum gap can be the dominant heat transfer mechanism in the near- and asperity-contact regimes and can potentially be controlled by an external force stimuli.

cond-mat.mes-hall↗

arXiv2022

Revisiting the Figure of Merit of Concentrated Solar Power Receivers

The figure of merit (FOM) is a widely used metric to characterize the performance of concentrated solar power (CSP) receivers by comparing the amount of solar thermal energy retained by the receiver to the incident concentrated solar radiation. However, the FOM is a strong function of the concentration factor and receiver temperature, thus direct comparison of FOM values measured under disparate operating conditions is inappropriate. To remedy this problem, the present study proposes a new metric called the receiver effectiveness calculated by normalizing the actual FOM with its theoretical maximum. The receiver effectiveness can be employed for comparing receiver performances regardless of their operating conditions, and can be treated as more-like the second law efficiency of thermodynamics. In addition, a theoretical limit of the CSP plant efficiency is also examined by combining the maximum FOM and the Carnot efficiency for different concentration factors and receiver temperatures. The calculated maximum CSP plant efficiency clearly indicate that optimizing FOM does not always lead to a better CSP plant performance. Along with the FOM, the proposed receiver effectiveness and maximum CSP system efficiency should be considered as complementary metrics to evaluate the performance of the CSP system.

physics.app-ph↗

arXiv2022

Characterization of Commercial Thermoelectric Modules for Precision Heat FLux Measurement

In this article, we present a cost-effective approach to the precision measurement of heat flux using commercial thermoelectric modules (TEMs). Two different methods of measuring heat flux with TEMs are investigated, namely passive mode based on the Seebeck effect and active mode based on the Peltier effect. For both modes, a TEM as a heat fluxmeter is calibrated to show a linear relation between the voltage across the TEM and the heat flow rate from 0 to 100 mW. While both modes exhibit sufficiently high sensitivities suitable for low heat flow measurement, active mode is shown to be $\sim$7 times more sensitive than passive mode. From the speculation on the origin of the measurement uncertainty, we propose a dual TEM scheme by operating the top TEM in passive mode while its bottom temperature maintains constant by the feedback-controlled bottom TEM. The dual-TEM scheme can suppress the sensitivity uncertainty by up to 4 times when compared to the single-TEM passive mode by stabilizing the bottom temperature. The response time of a 1.5 cm $\times$ 1.5 cm TEM is measured to be 8.90 $\pm$ 0.97 seconds for heating and 10.83 $\pm$ 0.65 seconds for cooling, which is slower than commercial heat fluxmeters but still fast enough to measure heat flux with a time resolution on the order of 10 seconds. We believe that the obtained results can facilitate the use of a commercial TEM for heat flux measurement in various thermal experiments

physics.ins-det↗

arXiv2021

First-principles calculations of phonon transport across a vacuum gap

Phonon transport across a vacuum gap separating intrinsic silicon crystals is predicted via the atomistic Green's function method combined with first-principles calculations of all interatomic force constants. The overlap of electron wave functions in the vacuum gap generates weak covalent interaction between the silicon surfaces, thus creating a pathway for phonons. Phonon transport, dominated by acoustic modes, exceeds near-field radiation for vacuum gaps smaller than ~ 1 nm. The first-principles-based approach proposed in this work is critical to accurately quantify the contribution of phonon transport to heat transfer in the extreme near field.

cond-mat.mes-hall↗

arXiv2021

Extreme Near-Field Heat Transfer Between Gold Surfaces

Extreme near-field heat transfer between metallic surfaces is a subject of debate as the state-of-the-art theory and experiments are in disagreement on the energy carriers driving heat transport. In an effort to elucidate the physics of extreme near-field heat transfer between metallic surfaces, this Letter presents a comprehensive model combining radiation, acoustic phonon and electron transport across sub-10-nm vacuum gaps. The results obtained for gold surfaces show that in the absence of bias voltage, acoustic phonon transport is dominant for vacuum gaps smaller than ~2 nm. The application of a bias voltage significantly affects the dominant energy carriers as it increases the phonon contribution mediated by the long-range Coulomb force and the electron contribution due to a lower potential barrier. For a bias voltage of 0.6 V, acoustic phonon transport becomes dominant at a vacuum gap of 5 nm, whereas electron tunneling dominates at sub-1-nm vacuum gaps. The comparison of the theory against experimental data from the literature suggests that well-controlled measurements between metallic surfaces are needed to quantify the contributions of acoustic phonon and electron as a function of the bias voltage.

cond-mat.mes-hall↗

arXiv2020

Comprehensive Energy Balance Analysis of Photon-Enhanced Thermionic Power Generation Considering Concentrated Solar Absorption Distribution

The present article reports a comprehensive energy balance analysis of a photon-enhanced thermionic emission (PETE) device when it is used for concentrated solar power (CSP) generation. To this end, we consider a realistic PETE device composed of a boron-doped silicon emitter on glass and a phosphorus-doped diamond collector on tungsten separated by the inter-electrode vacuum gap. Depth-dependent spectral solar absorption and its photovoltaic and photothermal energy conversion processes are rigorously calculated to predict the PETE power output and energy conversion efficiency. Our calculation predicts that when optimized, the power output of the considered PETE device can reach 1.6 W/cm$^2$ with the energy conversion efficiency of $\sim$18 \% for 100$\times$ solar concentration, which is substantially lower than those predicted in previous works under ideal conditions. In addition, the photon-enhancement ratio is lower than 10 and decreases with the increasing solar concentration due to the photothermal heating of the emitter, suggesting that PETE may be an adequate energy conversion process for low-to-medium CSP below $\sim$100$\times$ concentration. These observations signify the importance of a rigorous energy balance analysis based on spectral and spatial solar absorption distribution for the accurate prediction of PETE power generation.

physics.app-ph↗

arXiv2019

Revisiting Submicron-Gap Thermionic Power Generation Based on Comprehensive Charge and Thermal Transport Modeling

Over the past years, thermionic energy conversion (TEC) with a reduced inter-electrode vacuum gap has been studied as an effective way to mitigate a large potential barrier due to space charge accumulation. However, existing theoretical models do not fully consider the fundamental aspects of thermionic emission when the inter-electrode gap shrinks to the nanoscale, which results in underestimation of thermionic power generation for such small gaps. The present work addresses this challenge by comprehensively modeling charge and thermal transport processes with specific consideration of nanoscale gap effects, such as image charge perturbation, electron tunneling, and near-field thermal radiation. Carefully conducted energy balance analysis reveals that if optimized, submicron-gap TEC can excel the micron-gap counterpart with $\sim$4 times the power output and ~5-10 % higher energy conversion efficiency. Moreover, the high-temperature collector of the submicron-gap TEC, which is due to thermionic and near-field radiative heat transfer, allows the addition of a bottom-cycle heat engine to further enhance the power and efficiency when combined. Electric field concentration due to engineered surface roughness is also examined as a potential approach to produce an additional increase in power generation. We believe that the present work provides a theoretical framework for submicron-gap thermionic power generation as a promising energy recycling scheme for high-quality heat sources.

physics.app-ph↗

arXiv2017

Near-Field Enhanced Thermionic Energy Conversion for Renewable Energy Recycling

This article proposes a new energy harvesting concept that greatly enhances thermionic power generation with high e ciency by exploiting the near- field enhancement of thermal radiation. The proposed near-field enhanced thermionic energy conversion (NETEC) system is uniquely configured with a low-bandgap semiconductor cathode separated from a thermal emitter with a subwavelength gap distance, such that a significant amount of electrons can be photoexcited by near-field thermal radiation to contribute to the enhancement of thermionic current density. We theoretically demonstrate that the NETEC system can generate electric power at a significantly lower temperature than the standard thermionic generator, and the energy conver- sion e ciency can exceed 40%. The obtained results reveal that near-field photoexcitation can enhance the thermionic power output by more than 10 times, making this hybrid system attractive for renewable energy recycling.

cond-mat.mes-hall↗