SearcharxivSearch

arXiv subjects

Kevin Denis

Publications and source records attributed to Kevin Denis.

15 recordsLinked to original sources

A Measurement of the Largest-Scale CMB E-mode Polarization with CLASS

We present measurements of large-scale cosmic microwave background (CMB) E-mode polarization from the Cosmology Large Angular Scale Surveyor (CLASS) 90 GHz data. Using 115 det-yr of observations collected through 2024 with a variable-delay polarization modulator, we achieved a polarization sensitivity of $78\,\mathrm{\mu K\,arcmin}$, comparable to Planck at similar frequencies (100 and 143 GHz). The analysis demonstrates effective mitigation of systematic errors and addresses challenges to large-angular-scale power recovery posed by time-domain filtering in maximum-likelihood map-making. A novel implementation of the pixel-space transfer matrix is introduced, which enables efficient filtering simulations and bias correction in the power spectrum using the quadratic cross-spectrum estimator. Overall, we achieved an unbiased time-domain filtering correction to recover the largest angular scale polarization, with the only power deficit, arising from map-making non-linearity, being characterized as less than $3\%$. Through cross-correlation with Planck, we detected the cosmic reionization at $99.4\%$ significance and measured the reionization optical depth $\tau=0.053^{+0.018}_{-0.019}$, marking the first ground-based attempt at such a measurement. At intermediate angular scales ($\ell>30$), our results, both independently and in cross-correlation with Planck, remain fully consistent with Planck's measurements.

astro-ph.CO

Metal-Mesh Linear Variable Filter for Far-Infrared Wavelengths

Future far-infrared (IR) observatories require compact and cost efficient optical linear variable bandpass filters (LVBFs) to define their instrument spectral bands. We have designed novel far-IR LVBFs that consist of metal-mesh bandpass filters comprised of a gold film with cross-slots of varying sizes along a silicon (Si) substrate with anti-reflection (AR) coatings. We present our work on the simulated and measured transmission of non-AR coated and AR coated LVBFs for bandpass peaks from wavelengths of 24 to 36 $\mu$m with a resolving power ($R=\lambda_0/\Delta\lambda$) of R$\approx$6 for non-AR coated LVBFs and R$\approx$4 for AR coated LVBFs. We also present a method to decrease the effects of out-of-band high frequency transmission exhibited by metal-mesh filters by depositing a thin layer of hydrogenated amorphous silicon (a-Si:H) on the metal-mesh of the LVBF. We have fabricated and measured the LVBFs at room temperature and cryogenic temperatures (5 K). We measure a high peak transmission of $\sim$80-90 \% for the AR coated LVBF at 5 K and demonstrate that the a-Si:H LVBF is a promising method to address out-of-band high frequency transmission.

astro-ph.IM

Cross-Slot Metal-Mesh Bandpass Filters for Far-Infrared Astronomy

The far-infrared (IR) region is rich with information needed to characterize interstellar dust and to investigate the cold outer planets of the solar system and their icy moons. The proposed sub-orbital observatory the Balloon Experiment for Galactic INfrared Science (BEGINS) will utilize cryogenic instruments to map spectral energy distributions (SEDs) of interstellar dust in the Cygnus molecular cloud complex. A future high priority flagship mission Uranus Orbiter and Probe carrying a net flux radiometer (NFR) will study the in situ heat flux of the icy giants atmosphere to 10 bar pressure. These instruments require far-IR filters to define the instrument spectral bandwidths. Our ultimate goal is to define the instrument bands of BEGINS and the NFR with linear-variable filters (LVFs) and discrete-variable filters (DVFs). The LVFs and DVFs will be made of metal mesh band-pass filters (MMBF) comprised of a 100 nm thick gold film with cross-shaped slots of varying sizes along a silicon (Si) substrate with cyclic olefin copolymer (COC) anti-reflection (AR) coatings. We present our progress towards LVFs and DVFs with simulated and measured transmission of a room temperature, non-AR coated, single-band 44 $\mu$m MMBF filter. We have successfully fabricated, measured, and modeled a non-AR coated, room temperature 44 $\mu$m MMBF. The transmission at room temperature and non-AR coated was measured to be 27\% with a resolving power of 11. When COC-AR coated on both sides the transmission is expected to increase to 69\% with a resolving power of 10.

astro-ph.IM

Monolithic Kilopixel Silicon Microlens Arrays for Future Far-Infrared Observatories

Future far-infrared astrophysics observatories will require focal plane arrays containing thousands of ultra-sensitive, superconducting detectors, each of which needs to be optically coupled to the telescope. At longer wavelengths, many approaches have been developed including feedhorn arrays and macroscopic arrays of lenslets. However, with wavelengths as short as 25 microns, optical coupling in the far-infrared remains challenging. In this paper, we present a novel approach for fabricating far-infrared monolithic silicon microlens arrays using grayscale lithography and deep reactive ion etching. The design, fabrication, and characterization of the microlens arrays are discussed. We compare the designed and fabricated lens profile, and calculate that the fabricated lenses will achieve 84% encircled power for the designed detector, which is only 3% less than the designed performance. We also present methods developed for anti-reflection coating microlens arrays and for a silicon-to-silicon die bonding process to hybridize microlens arrays with detector arrays.

astro-ph.IM

CLASS Data Pipeline and Maps for 40 GHz Observations through 2022

The Cosmology Large Angular Scale Surveyor (CLASS) is a telescope array that observes the cosmic microwave background over 75\% of the sky from the Atacama Desert, Chile, at frequency bands centered near 40, 90, 150, and 220~GHz. This paper describes the CLASS data pipeline and maps for 40~GHz observations conducted from August 2016 to May 2022. We demonstrate how well the CLASS survey strategy, with rapid ($\sim10\,\mathrm{Hz}$) front-end modulation, recovers the large-scale Galactic polarization signal from the ground: the mapping transfer function recovers $\sim75$\% of $EE$, $BB$, and $VV$ power at $\ell=20$ and $\sim45$\% at $\ell=10$. We present linear and circular polarization maps over 75\% of the sky. Simulations based on the data imply the maps have a white noise level of $110\,\mathrm{\mu K\, arcmin}$ and correlated noise component rising at low-$\ell$ as $\ell^{-2.2}$. The transfer-function-corrected low-$\ell$ component is comparable to the white noise at the angular knee frequencies of $\ell\approx16$ (linear polarization) and $\ell\approx12$ (circular polarization). Finally, we present simulations of the level at which expected sources of systematic error bias the measurements, finding sub-percent bias for the $\Lambda\mathrm{CDM}$ $EE$ power spectra. Bias from $E$-to-$B$ leakage due to the data reduction pipeline and polarization angle uncertainty approaches the expected level for an $r=0.01$ $BB$ power spectrum. Improvements to the instrument calibration and the data pipeline will decrease this bias.

astro-ph.CO

Calibration of Transition-edge Sensor (TES) Bolometer Arrays with Application to CLASS

The current and future cosmic microwave background (CMB) experiments fielding kilo-pixel arrays of transition-edge sensor (TES) bolometers require accurate and robust gain calibration methods. We simplify and refactor the standard TES model to directly relate the detector responsivity calibration and optical time constant to the measured TES current $I$ and the applied bias current $I_{\mathrm{b}}$. The calibration method developed for the Cosmology Large Angular Scale Surveyor (CLASS) TES bolometer arrays relies on current versus voltage ($I$-$V$) measurements acquired daily prior to CMB observations. By binning Q-band (40GHz) $I$-$V$ measurements by optical loading, we find that the gain calibration median standard error within a bin is 0.3%. We test the accuracy of this "$I$-$V$ bin" detector calibration method by using the Moon as a photometric standard. The ratio of measured Moon amplitudes between detector pairs sharing the same feedhorn indicates a TES calibration error of 0.5%. We also find that for the CLASS Q-band TES array, calibrating the response of individual detectors based solely on the applied TES bias current accurately corrects TES gain variations across time but introduces a bias in the TES calibration from data counts to power units. Since the TES current bias value is set and recorded before every observation, this calibration method can always be applied to raw TES data and is not subject to $I$-$V$ data quality or processing errors.

astro-ph.IM

The CLASS 150/220 GHz Polarimeter Array: Design, Assembly, and Characterization

We report on the development of a polarization-sensitive dichroic (150/220 GHz) detector array for the Cosmology Large Angular Scale Surveyor (CLASS) delivered to the telescope site in June 2019. In concert with existing 40 and 90 GHz telescopes, the 150/220 GHz telescope will make observations of the cosmic microwave background over large angular scales aimed at measuring the primordial B-mode signal, the optical depth to reionization, and other fundamental physics and cosmology. The 150/220 GHz focal plane array consists of three detector modules with 1020 transition edge sensor (TES) bolometers in total. Each dual-polarization pixel on the focal plane contains four bolometers to measure the two linear polarization states at 150 and 220 GHz. Light is coupled through a planar orthomode transducer (OMT) fed by a smooth-walled feedhorn array made from an aluminum-silicon alloy (CE7). In this work, we discuss the design, assembly, and in-lab characterization of the 150/220 GHz detector array. The detectors are photon-noise limited, and we estimate the total array noise-equivalent power (NEP) to be 2.5 and 4 aW$\sqrt{\mathrm{s}}$ for 150 and 220 GHz arrays, respectively.

astro-ph.IM

Two-year Cosmology Large Angular Scale Surveyor (CLASS) Observations: A Measurement of Circular Polarization at 40 GHz

We report circular polarization measurements from the first two years of observation with the 40 GHz polarimeter of the Cosmology Large Angular Scale Surveyor (CLASS). CLASS is conducting a multi-frequency survey covering 75% of the sky from the Atacama Desert designed to measure the cosmic microwave background (CMB) linear E and B polarization on angular scales $1^\circ \lesssim θ\leq 90^\circ$, corresponding to a multipole range of $2 \leq \ell \lesssim 200$. The modulation technology enabling measurements of linear polarization at the largest angular scales from the ground, the Variable-delay Polarization Modulator, is uniquely designed to provide explicit sensitivity to circular polarization (Stokes $V$). We present a first detection of circularly polarized atmospheric emission at 40 GHz that is well described by a dipole with an amplitude of $124\pm4\,\mathrm{μK}$ when observed at an elevation of $45^\circ$, and discuss its potential impact as a foreground to CMB experiments. Filtering the atmospheric component, CLASS places a 95% C.L. upper limit of $0.4\,\mathrm{μK}^2$ to $13.5\,\mathrm{μK}^2$ on $\ell(\ell+1)C_\ell^{VV}/(2π)$ between $1 \leq \ell \leq 120$, representing a two-orders-of-magnitude improvement over previous limits.

astro-ph.CO

On-sky performance of the CLASS Q-band telescope

The Cosmology Large Angular Scale Surveyor (CLASS) is mapping the polarization of the Cosmic Microwave Background (CMB) at large angular scales ($2<\ell\lesssim200$) in search of a primordial gravitational wave B-mode signal down to a tensor-to-scalar ratio of $r \approx 0.01$. The same data set will provide a near sample-variance-limited measurement of the optical depth to reionization. Between June 2016 and March 2018, CLASS completed the largest ground-based Q-band CMB survey to date, covering over 31 000~square-degrees (75% of the sky), with an instantaneous array noise-equivalent temperature (NET) sensitivity of $32~μ\mbox{K}_{cmb}\sqrt{\mbox{s}}$. We demonstrate that the detector optical loading ($1.6~\mbox{pW}$) and noise-equivalent power ($19~\mbox{aW}\sqrt{\mbox{s}}$) match the expected noise model dominated by photon bunching noise. We derive a $13.1\pm0.3~\mbox{K/pW}$ calibration to antenna temperature based on Moon observations, which translates to an optical efficiency of $0.48\pm0.04$ and a $27~\mbox{K}$ system noise temperature. Finally, we report a Tau A flux density of $308\pm11~\mbox{Jy}$ at $38.4\pm0.2~\mbox{GHz}$, consistent with the WMAP Tau A time-dependent spectral flux density model.

astro-ph.IM

The Cosmology Large Angular Scale Surveyor Receiver Design

The Cosmology Large Angular Scale Surveyor consists of four instruments performing a CMB polarization survey. Currently, the 40 GHz and first 90 GHz instruments are deployed and observing, with the second 90 GHz and a multichroic 150/220 GHz instrument to follow. The receiver is a central component of each instrument's design and functionality. This paper describes the CLASS receiver design, using the first 90 GHz receiver as a primary reference. Cryogenic cooling and filters maintain a cold, low-noise environment for the detectors. We have achieved receiver detector temperatures below 50 mK in the 40 GHz instrument for 85% of the initial 1.5 years of operation, and observed in-band efficiency that is consistent with pre-deployment estimates. At 90 GHz, less than 26% of in-band power is lost to the filters and lenses in the receiver, allowing for high optical efficiency. We discuss the mounting scheme for the filters and lenses, the alignment of the cold optics and detectors, stray light control, and magnetic shielding.

astro-ph.IM

Design and characterization of the Cosmology Large Angular Scale Surveyor (CLASS) 93 GHz focal plane

The Cosmology Large Angular Scale Surveyor (CLASS) aims to detect and characterize the primordial B-mode signal and make a sample-variance-limited measurement of the optical depth to reionization. CLASS is a ground-based, multi-frequency microwave polarimeter that surveys 70% of the microwave sky every day from the Atacama Desert. The focal plane detector arrays of all CLASS telescopes contain smooth-walled feedhorns that couple to transition-edge sensor (TES) bolometers through symmetric planar orthomode transducer (OMT) antennas. These low noise polarization-sensitive detector arrays are fabricated on mono-crystalline silicon wafers to maintain TES uniformity and optimize optical efficiency throughout the wafer. In this paper, we discuss the design and characterization of the first CLASS 93 GHz detector array. We measure the dark parameters, bandpass, and noise spectra of the detectors and report that the detectors are photon-noise limited. With current array yield of 82%, we estimate the total array noise-equivalent power (NEP) to be 2.1 aW$\sqrt[]{\mathrm{s}}$.

astro-ph.IM

Variable-delay Polarization Modulators for the CLASS Telescopes

The search for inflationary primordial gravitational waves and the measurement of the optical depth to reionization, both through their imprint on the large angular scale correlations in the polarization of the cosmic microwave background (CMB), has created the need for high sensitivity measurements of polarization across large fractions of the sky at millimeter wavelengths. These measurements are subject to instrumental and atmospheric $1/f$ noise, which has motivated the development of polarization modulators to facilitate the rejection of these large systematic effects. Variable-delay polarization modulators (VPMs) are used in the Cosmology Large Angular Scale Surveyor (CLASS) telescopes as the first element in the optical chain to rapidly modulate the incoming polarization. VPMs consist of a linearly polarizing wire grid in front of a movable flat mirror. Varying the distance between the grid and the mirror produces a changing phase shift between polarization states parallel and perpendicular to the grid which modulates Stokes U (linear polarization at $45^\circ$) and Stokes V (circular polarization). The CLASS telescopes have VPMs as the first optical element from the sky; this simultaneously allows a lock-in style polarization measurement and the separation of sky polarization from any instrumental polarization further along in the optical path. The Q-band CLASS VPM was the first VPM to begin observing the CMB full time, starting in the Spring of 2016. The first W-band CLASS VPM was installed in the Spring of 2018.

astro-ph.IM

The Cosmology Large Angular Scale Surveyor

The Cosmology Large Angular Scale Surveyor (CLASS) is a four telescope array designed to characterize relic primordial gravitational waves from inflation and the optical depth to reionization through a measurement of the polarized cosmic microwave background (CMB) on the largest angular scales. The frequencies of the four CLASS telescopes, one at 38 GHz, two at 93 GHz, and one dichroic system at 145/217 GHz, are chosen to avoid spectral regions of high atmospheric emission and span the minimum of the polarized Galactic foregrounds: synchrotron emission at lower frequencies and dust emission at higher frequencies. Low-noise transition edge sensor detectors and a rapid front-end polarization modulator provide a unique combination of high sensitivity, stability, and control of systematics. The CLASS site, at 5200 m in the Chilean Atacama desert, allows for daily mapping of up to 70\% of the sky and enables the characterization of CMB polarization at the largest angular scales. Using this combination of a broad frequency range, large sky coverage, control over systematics, and high sensitivity, CLASS will observe the reionization and recombination peaks of the CMB E- and B-mode power spectra. CLASS will make a cosmic variance limited measurement of the optical depth to reionization and will measure or place upper limits on the tensor-to-scalar ratio, $r$, down to a level of 0.01 (95\% C.L.).

astro-ph.IM

The Cosmology Large Angular Scale Surveyor (CLASS): 38 GHz detector array of bolometric polarimeters

The Cosmology Large Angular Scale Surveyor (CLASS) experiment aims to map the polarization of the Cosmic Microwave Background (CMB) at angular scales larger than a few degrees. Operating from Cerro Toco in the Atacama Desert of Chile, it will observe over 65% of the sky at 38, 93, 148, and 217 GHz. In this paper we discuss the design, construction, and characterization of the CLASS 38 GHz detector focal plane, the first ever Q-band bolometric polarimeter array.

astro-ph.IM

CLASS: The Cosmology Large Angular Scale Surveyor

The Cosmology Large Angular Scale Surveyor (CLASS) is an experiment to measure the signature of a gravita-tional-wave background from inflation in the polarization of the cosmic microwave background (CMB). CLASS is a multi-frequency array of four telescopes operating from a high-altitude site in the Atacama Desert in Chile. CLASS will survey 70\% of the sky in four frequency bands centered at 38, 93, 148, and 217 GHz, which are chosen to straddle the Galactic-foreground minimum while avoiding strong atmospheric emission lines. This broad frequency coverage ensures that CLASS can distinguish Galactic emission from the CMB. The sky fraction of the CLASS survey will allow the full shape of the primordial B-mode power spectrum to be characterized, including the signal from reionization at low $\ell$. Its unique combination of large sky coverage, control of systematic errors, and high sensitivity will allow CLASS to measure or place upper limits on the tensor-to-scalar ratio at a level of $r=0.01$ and make a cosmic-variance-limited measurement of the optical depth to the surface of last scattering, $τ$.

astro-ph.IM