arXiv subjects

Kevin F. McCarty

Publications and source records attributed to Kevin F. McCarty.

At least 19 recordsLinked to original sources

arXiv2015

Real-time observation of epitaxial graphene domain reorientation

Graphene films grown by vapor deposition tend to be polycrystalline due to the nucleation and growth of islands with different in-plane orientations. Here, using low-energy electron microscopy, we find that micron-sized graphene islands on Ir(111) rotate to a preferred orientation during thermal annealing. We observe three alignment mechanisms: the simultaneous growth of aligned domains and dissolution of rotated domains, i.e., "ripening"; domain-boundary motion within islands; and continuous lattice-rotation of entire domains. By measuring the relative growth velocity of domains during ripening, we estimate that the driving force for alignment is on the order of 0.1 meV per C atom and increases with rotation angle. A simple model of the orientation-dependent energy associated with the moiré corrugation of the graphene sheet due to local variations in the graphene-substrate interaction reproduces the results. This work suggests new strategies for improving the van der Waals epitaxy of 2D materials.

cond-mat.mtrl-sci↗

arXiv2014

Influence of lattice orientation on growth and structure of graphene on Cu(001)

We have used low-energy electron microscopy and diffraction to examine the significance of lattice orientation in graphene growth on Cu(001). Individual graphene domains undergo anisotropic growth on the Cu surface, and develop into lens shapes with their long axes roughly aligned with the Cu<100> in-plane directions. The long axis of a lens-shaped domain is only rarely oriented along a C<11> direction, suggesting that carbon attachment at "zigzag" graphene island edges is unfavorable. A kink-mediated adatom attachment process is consistent with the behavior observed here and reported in the literature. The details of the ridged moire pattern formed by the superposition of the graphene lattice on the (001) Cu surface also evolve with the graphene lattice orientation, and are predicted well by a simple geometric model. Managing the kink-mediated growth mode of graphene on Cu(001) will be necessary for the continued improvement of this graphene synthesis technique.

cond-mat.mtrl-sci↗

arXiv2013

Order-disorder phase transition on the (100) surface of magnetite

Using low-energy electron diffraction, we show that the room-temperature $(\sqrt{2}\times\sqrt{2})R45^\circ$ reconstruction of Fe$_3$O$_4$(100) reversibly disorders at $\sim$450 $^\circ$C. Short-range order persists above the transition, suggesting that the transition is second order and Ising-like. We interpret the transition in terms of a model in which sub-surface Fe$^{3+}$ is replaced by Fe$^{2+}$ as the temperature is raised. This model reproduces the structure of antiphase boundaries previously observed with STM as well as the continuous nature of the transition. To account for the observed transition temperature, the energy cost of each charge rearrangement is 82 meV.

cond-mat.mtrl-sci↗

arXiv2013

Room Temperature In-plane <100> Magnetic Easy Axis for Fe3O4/SrTiO3(001):Nb Grown by Infrared PLD

We examine the magnetic easy-axis directions of stoichiometric magnetite films grown on SrTiO3:Nb by infrared pulsed-laser deposition. Spin-polarized low-energy electron microscopy reveals that the individual magnetic domains are magnetized along the in-plane <100> film directions. Magneto-optical Kerr effect measurements show that the maxima of the remanence and coercivity are also along in-plane <100> film directions. This easy-axis orientation differs from bulk magnetite and films prepared by other techniques, establishing that the magnetic anisotropy can be tuned by film growth.

cond-mat.mtrl-sci↗

arXiv2013

Real-space study of the growth of magnesium on ruthenium

The growth of magnesium on ruthenium has been studied by low-energy electron microscopy (LEEM) and scanning tunneling microscopy (STM). In LEEM, a layer-by-layer growth is observed except in the first monolayer, where the completion of the first layer in inferred by a clear peak in electron reflectivity. Desorption from the films is readily observable at 400 K. Real-space STM and low-energy electron diffraction confirm that sub-monolayer coverage presents a moiré pattern with a 1.2 nm periodicity, which evolves with further Mg deposition by compressing the Mg layer to a 2.2 nm periodicity. Layer-by-layer growth is followed in LEEM up to 10 ML. On films several ML thick a substantial density of stacking faults are observed by dark-field imaging on large terraces of the substrate, while screw dislocations appear in the stepped areas. The latter are suggested to result from the mismatch in heights of the Mg and Ru steps. Quantum size effect oscillations in the reflected LEEM intensity are observed as a function of thickness, indicating an abrupt Mg/Ru interface.

cond-mat.mtrl-sci↗

arXiv2013

Valence Band Circular Dichroism in non-magnetic Ag/Ru(0001) at normal emission

For the non-magnetic system of Ag films on Ru(0001), we have measured the circular dichroism of photoelectrons emitted along the surface normal, the geometry typically used in photoemission electron microscopy (PEEM). Photoemission spectra were acquired from micrometer-sized regions having uniformly thick Ag films on a single, atomically flat Ru terrace. For a single Ag layer, we find a circular dichroism that exceeds 6% at the d-derived band region around 4.5 eV binding energy. The dichroism decreases as the Ag film thickness increases to three atomic layers. We discuss the origin of the circular dichroism in terms of the symmetry lowering that can occur even in normal emission.

cond-mat.mes-hall↗

arXiv2013

Initial Stages of FeO Growth on Ru(0001)

We study how FeO wüstite films on Ru(0001) grow by oxygen-assisted molecular beam epitaxy at elevated temperatures (800-900 K). The nucleation and growth of FeO islands are observed in real time by low-energy electron microscopy (LEEM). When the growth is performed in an oxygen pressure of 10-6 Torr, the islands are of bilayer thickness (Fe-O-Fe-O). In contrast, under a pressure of 10-8 Torr, the islands are a single FeO layer thick. We propose that the film thickness is controlled by the concentration of oxygen adsorbed on the Ru. More specifically, when monolayer growth increases the adsorbed oxygen concentration above a limiting value, its growth is suppressed. Increasing the temperature at a fixed oxygen pressure decreases the density of FeO islands. However, the nucleation density is not a monotonic function of oxygen pressure.

cond-mat.mtrl-sci↗

arXiv2012

Growth from Below: Bilayer Graphene on Copper by Chemical Vapor Deposition

We evaluate how a second graphene layer forms and grows on Cu foils during chemical vapor deposition (CVD). Low-energy electron diffraction and microscopy is used to reveal that the second layer nucleates and grows next to the substrate, i.e., under a graphene layer. This underlayer mechanism can facilitate the synthesis of uniform single-layer films but presents challenges for growing uniform bilayer films by CVD. We also show that the buried and overlying layers have the same edge termination.

cond-mat.mtrl-sci↗

arXiv2012

Extraordinary epitaxial alignment of graphene islands on Au(111)

Pristine, single-crystalline graphene displays a unique collection of remarkable electronic properties that arise from its two-dimensional, honeycomb structure. Using in-situ low-energy electron microscopy, we show that when deposited on the (111) surface of Au carbon forms such a structure. The resulting monolayer, epitaxial film is formed by the coalescence of dendritic graphene islands that nucleate at a high density. Over 95% of these islands can be identically aligned with respect to each other and to the Au substrate. Remarkably, the dominant island orientation is not the better lattice-matched 30^{\circ} rotated orientation but instead one in which the graphene [01] and Au [011] in-plane directions are parallel. The epitaxial graphene film is only weakly coupled to the Au surface, which maintains its reconstruction under the slightly p-type doped graphene. The linear electronic dispersion characteristic of free-standing graphene is retained regardless of orientation. That a weakly interacting, non-lattice matched substrate is able to lock graphene into a particular orientation is surprising. This ability, however, makes Au(111) a promising substrate for the growth of single crystalline graphene films.

cond-mat.mtrl-sci↗

arXiv2012

Viable thermionic emission from graphene-covered metals

Thermionic emission from monolayer graphene grown on representative transition metals, Ir and Ru, is characterized by low-energy electron microscopy (LEEM). Work functions were determined from the temperature dependence of the emission current and from the electron energy spectrum of emitted electrons. The high-temperature work function of the strongly interacting system graphene/Ru(0001) is sufficiently low, 3.3 \pm 0.1 eV, to have technological potential for large-area emitters that are spatially uniform, efficient, and chemically inert. The thermionic work functions of the less strongly interacting system graphene/Ir(111) are over 1 eV larger and vary substantially (0.4 eV) between graphene orientations rotated by 30°.

cond-mat.mtrl-sci↗

arXiv2012

Graphene/Au(111) interaction studied by scanning tunneling microscopy

We have used scanning tunneling microscopy to study the structure of graphene islands on Au(111) grown by deposition of elemental carbon at 950°C. Consistent with low-energy electron microscopic observations, we find that the graphene islands have dendritic shapes. The islands tend to cover depressed regions of the Au surface, suggesting that Au is displaced as the graphene grows. If small tunneling currents are used, it is possible to image simultaneously the graphene/Au moiré and the Au herringbone reconstruction, which forms underneath the graphene on cooling from the growth temperature. The delicate herringbone structure and its periodicity remain unchanged from the bare Au surface. Using a Frenkel-Kontorova model we deduce that this striking observation is consistent with an attraction between graphene and Au of less than 13 meV per C atom. Raman spectroscopy supports this weak interaction. However, at the tunneling currents necessary for atomic resolution image of graphene, the Au reconstruction is altered, implying influential tip-sample interactions and a mobile Au surface beneath the graphene.

cond-mat.mtrl-sci↗

arXiv2012

Hydrogen-induced reversible spin-reorientation transition and magnetic stripe domain phase in bilayer Co on Ru(0001)

Imaging the change in the magnetization vector in real time by spin-polarized low-energy electron microscopy, we observed a hydrogen-induced, reversible spin-reorientation transition in a cobalt bilayer on Ru(0001). Initially, hydrogen sorption reduces the size of out-of-plane magnetic domains and leads to the formation of a magnetic stripe domain pattern, which can be understood as a consequence of reducing the out-of-plane magnetic anisotropy. Further hydrogen sorption induces a transition to an in-plane easy-axis. Desorbing the hydrogen by heating the film to 400 K recovers the original out-of-plane magnetization. By means of ab-initio calculations we determine that the origin of the transition is the local effect of the hybridization of the hydrogen orbital and the orbitals of the Co atoms bonded to the absorbed hydrogen.

cond-mat.mtrl-sci↗

arXiv2011

Magnetism in nanometer-thick magnetite

The oldest known magnetic material, magnetite, is of current interest for use in spintronics as a thin film. An open question is how thin can magnetite films be and still retain the robust ferrimagnetism required for many applications. We have grown one-nanometer-thick magnetite crystals and characterized them in situ by electron and photoelectron microscopies including selected-area x-ray circular dichroism. Well-defined magnetic patterns are observed in individual nano-crystals up to at least 520 K, establishing the retention of ferrimagnetism in magnetite two-unit-cells thick.

cond-mat.mes-hall↗

arXiv2011

Electronic structure of graphene on single crystal copper substrates

The electronic structure of graphene on Cu(111) and Cu(100) single crystals is investigated using low energy electron microscopy, low energy electron diffraction and angle resolved photoemission spectroscopy. On both substrates the graphene is rotationally disordered and interactions between the graphene and substrate lead to a shift in the Dirac crossing of $\sim$ -0.3 eV and the opening of a $\sim$ 250 meV gap. Exposure of the samples to air resulted in intercalation of oxygen under the graphene on Cu(100), which formed a ($\sqrt{2} \times 2\sqrt{2}$)R45$^{\rm o}$ superstructure. The effect of this intercalation on the graphene $π$ bands is to increase the offset of the Dirac crossing ($\sim$ -0.6 eV) and enlarge the gap ($\sim$ 350 meV). No such effect is observed for the graphene on Cu(111) sample, with the surface state at $Γ$ not showing the gap associated with a surface superstructure. The graphene film is found to protect the surface state from air exposure, with no change in the effective mass observed.

cond-mat.mes-hall↗

arXiv2011

Three-Fold Diffraction Symmetry in Epitaxial Graphene and the SiC Substrate

The crystallographic symmetries and spatial distribution of stacking domains in graphene films on SiC have been studied by low energy electron diffraction (LEED) and dark field imaging in a low energy electron microscope (LEEM). We find that the graphene diffraction spots from 2 and 3 atomic layers of graphene have 3-fold symmetry consistent with AB (Bernal) stacking of the layers. On the contrary, graphene diffraction spots from the buffer layer and monolayer graphene have apparent 6-fold symmetry, although the 3-fold nature of the satellite spots indicates a more complex periodicity in the graphene sheets.

cond-mat.mtrl-sci↗

arXiv2010

In-plane orientation effects on the electronic structure, stability and Raman scattering of monolayer graphene on Ir(111)

We employ angle-resolved photoemission spectroscopy (ARPES) to investigate the electronic structures of two rotational variants of epitaxial, single-layer graphene on Ir(111). As grown, the more-abundant R0 variant is nearly charge-neutral, with strong hybridization between graphene and Ir bands near the Fermi level. The graphene Fermi surface and its replicas exactly coincide with Van Hove singularities in the Ir Fermi surface. Sublattice symmetry breaking introduces a small gap-inducing potential at the Dirac crossing, which is revealed by n-doping the graphene using K atoms. The energy gaps between main and replica bands (originating from the moiré interference pattern between graphene and Ir lattices) is shown to be non-uniform along the mini- zone boundary due to hybridization with Ir bands. An electronically mediated interaction is proposed to account for the stability of the R0 variant. The variant rotated 30° in-plane, R30, is p-doped as grown and K doping reveals no band gap at the Dirac crossing. No replica bands are found in ARPES measurements. Raman spectra from the R30 variant exhibit the characteristic phonon modes of graphene, while R0 spectra are featureless. These results show that the film/substrate interaction changes from chemisorption (R0) to physisorption (R30) with in-plane orientation. Finally, graphene-covered Ir has a work function lower than the clean substrate but higher than graphite.

cond-mat.mtrl-sci↗

arXiv2010

Measuring individual overpotentials in an operating solid-oxide electrochemical cell

We use photo-electrons as a non-contact probe to measure local electrical potentials in a solid-oxide electrochemical cell. We characterize the cell in operando at near-ambient pressure using spatially-resolved X-ray photoemission spectroscopy. The overpotentials at the interfaces between the Ni and Pt electrodes and the yttria-stabilized zirconia (YSZ) electrolyte are directly measured. The method is validated using electrochemical impedance spectroscopy. Using the overpotentials, which characterize the cell's inefficiencies, we compare without ambiguity the electro-catalytic efficiencies of Ni and Pt, finding that on Ni H_2O splitting proceeds more rapidly than H2 oxidation, while on Pt, H2 oxidation proceeds more rapidly than H2O splitting.

physics.chem-ph↗

arXiv2010

Oxidation of graphene on metals

We use low-energy electron microscopy to investigate how graphene is removed from Ru(0001) and Ir(111) by reaction with oxygen. We find two mechanisms on Ru(0001). At short times, oxygen reacts with carbon monomers on the surrounding Ru surface, decreasing their concentration below the equilibrium value. This undersaturation causes a flux of carbon from graphene to the monomer gas. In this initial mechanism, graphene is etched at a rate that is given precisely by the same non-linear dependence on carbon monomer concentration that governs growth. Thus, during both growth and etching, carbon attaches and detaches to graphene as clusters of several carbon atoms. At later times, etching accelerates. We present evidence that this process involves intercalated oxygen, which destabilizes graphene. On Ir, this mechanism creates observable holes. It also occurs mostly quickly near wrinkles in the graphene islands, depends on the orientation of the graphene with respect to the Ir substrate, and, in contrast to the first mechanism, can increase the density of carbon monomers. We also observe that both layers of bilayer graphene islands on Ir etch together, not sequentially.

cond-mat.mtrl-sci↗