arXiv subjects

Kevin M. Daniels

Publications and source records attributed to Kevin M. Daniels.

10 recordsLinked to original sources

arXiv2026

Controllable Growth and Characterization of α- and β-phase MnSe by Chemical Vapor Deposition

Manganese selenide (MnSe) is a promising air-stable two-dimensional magnetic semiconductor for which theory predicts robust ferromagnetism in monolayers with Curie temperatures approaching 250 K. However, the crystallographic phases and magnetic properties of thin-film MnSe grown by scalable methods remain poorly understood. Here, we demonstrate the controllable growth of $α$- and $β$-phase MnSe on C-face sapphire using a three-zone chemical vapor deposition process with elemental Se and ${MnCl_{2}}$ precursors in an $Ar/{H_{2}}$ atmosphere. Using Raman spectroscopy, atomic force microscopy, scanning electron microscopy, and X-ray photoelectron spectroscopy, we show that our process yields phase-pure $α$-MnSe nanorods and $β$-MnSe triangular flakes with lateral sizes up to 20 $μm$ and thicknesses of 15-30 nm. Low-temperature photoluminescence of the $β$-phase films reveals a bandgap of approximately 2.0 eV. Systematic variation of growth parameters shows that precursor vapor pressure, rather than ${H_{2}}$ partial pressure, is the dominant factor controlling lateral flake size. Vibrating-sample magnetometry measurements reveal a $N{é}el$ temperature of 53 K in the $β$-phase films, providing clear evidence of antiferromagnetism in the multilayer regime and establishing MnSe as a tunable platform for 2D spintronic and optoelectronic devices.

cond-mat.mtrl-sci↗

arXiv2023

Quasi-free-standing AA-stacked bilayer graphene induced by calcium intercalation of the graphene-silicon carbide interface

We study quasi-freestanding bilayer graphene on silicon carbide intercalated by calcium. The intercalation, and subsequent changes to the system, were investigated by low-energy electron diffraction, angle-resolved photoemission spectroscopy (ARPES) and density-functional theory (DFT). Calcium is found to intercalate only at the graphene-SiC interface, completely displacing the hydrogen terminating SiC. As a consequence, the system becomes highly n-doped. Comparison to DFT calculations shows that the band dispersion, as determined by ARPES, deviates from the band structure expected for Bernal-stacked bilayer graphene. Instead, the electronic structure closely matches AA-stacked bilayer graphene on Ca-terminated SiC, indicating a spontaneous transition from AB- to AA-stacked bilayer graphene following calcium intercalation of the underlying graphene-SiC interface.

cond-mat.mtrl-sci↗

arXiv2023

Increasing the Rate of Magnesium Intercalation Underneath Epitaxial Graphene on 6H-SiC(0001)

Magnesium intercalated 'quasi-freestanding' bilayer graphene on 6H-SiC(0001) (Mg-QFSBLG) has many favorable properties (e.g., highly n-type doped, relatively stable in ambient conditions). However, intercalation of Mg underneath monolayer graphene is challenging, requiring multiple intercalation steps. Here, we overcome these challenges and subsequently increase the rate of Mg intercalation by laser patterning (ablating) the graphene to form micron-sized discontinuities. We then use low energy electron diffraction to verify Mg-intercalation and conversion to Mg-QFSBLG, and X-ray photoelectron spectroscopy to determine the Mg intercalation rate for patterned and non-patterned samples. By modeling Mg intercalation with the Verhulst equation, we find that the intercalation rate increase for the patterned sample is 4.5$\pm$1.7. Since the edge length of the patterned sample is $\approx$5.2 times that of the non-patterned sample, the model implies that the increased intercalation rate is proportional to the increase in edge length. Moreover, Mg intercalation likely begins at graphene discontinuities in pristine samples (not step edges or flat terraces), where the 2D-like crystal growth of Mg-silicide proceeds. Our laser patterning technique may enable the rapid intercalation of other atomic or molecular species, thereby expanding upon the library of intercalants used to modify the characteristics of graphene, or other 2D materials and heterostructures.

cond-mat.mtrl-sci↗

arXiv2023

Strong transient magnetic fields induced by THz-driven plasmons in graphene disks

Strong circularly polarized excitation opens up the possibility to generate and control effective magnetic fields in solid state systems, e.g., via the optical inverse Faraday effect or the phonon inverse Faraday effect. While these effects rely on material properties that can be tailored only to a limited degree, plasmonic resonances can be fully controlled by choosing proper dimensions and carrier concentrations. Plasmon resonances provide new degrees of freedom that can be used to tune or enhance the light-induced magnetic field in engineered metamaterials. Here we employ graphene disks to demonstrate light-induced transient magnetic fields from a plasmonic circular current with extremely high efficiency. The effective magnetic field at the plasmon resonance frequency of the graphene disks (3.5 THz) is evidenced by a strong (~1°) ultrafast Faraday rotation (~ 20 ps). In accordance with reference measurements and simulations, we estimated the strength of the induced magnetic field to be on the order of 0.7 T under a moderate pump fluence of about 440 nJ cm-2.

cond-mat.mes-hall↗

arXiv2020

Magnesium-intercalated graphene on SiC: highly n-doped air-stable bilayer graphene at extreme displacement fields

We use angle-resolved photoemission spectroscopy to investigate the electronic structure of bilayer graphene at high n-doping and extreme displacement fields, created by intercalating epitaxial monolayer graphene on silicon carbide with magnesium to form quasi-freestanding bilayer graphene on magnesium-terminated silicon carbide. Angle-resolved photoemission spectroscopy reveals that upon magnesium intercalation, the single massless Dirac band of epitaxial monolayer graphene is transformed into the characteristic massive double-band Dirac spectrum of quasi-freestanding bilayer graphene. Analysis of the spectrum using a simple tight binding model indicates that magnesium intercalation results in an n-type doping of 2.1 $\times$ 10$^{14}$ cm$^{-2}$, creates an extremely high displacement field of 2.6 V/nm, opening a considerable gap of 0.36 eV at the Dirac point. This is further confirmed by density-functional theory calculations for quasi-freestanding bilayer graphene on magnesium-terminated silicon carbide, which show a similar doping level, displacement field and bandgap. Finally, magnesium-intercalated samples are surprisingly robust to ambient conditions; no significant changes in the electronic structure are observed after 30 minutes exposure in air.

cond-mat.mes-hall↗

arXiv2020

Freestanding n-Doped Graphene via Intercalation of Calcium and Magnesium into the Buffer Layer - SiC(0001) Interface

The intercalation of epitaxial graphene on SiC(0001) with Ca has been studied extensively, yet precisely where the Ca resides remains elusive. Furthermore, the intercalation of Mg underneath epitaxial graphene on SiC(0001) has not been reported. Here, we use low energy electron diffraction, x-ray photoelectron spectroscopy, secondary electron cut-off photoemission and scanning tunneling microscopy to elucidate the physical and electronic structure of both Ca- and Mg-intercalated epitaxial graphene on 6H-SiC(0001). We find that Ca intercalates underneath the buffer layer and bonds to the Si-terminated SiC surface, breaking the C-Si bonds of the buffer layer i.e. 'freestanding' the buffer layer to form Ca-intercalated quasi-freestanding bilayer graphene (Ca-QFSBLG). The situation is similar for the Mg-intercalation of epitaxial graphene on SiC(0001), where an ordered Mg-terminated reconstruction at the SiC surface and Mg bonds to the Si-terminated SiC surface are formed, resulting in Mg-intercalated quasi-freestanding bilayer graphene (Mg-QFSBLG). Ca-intercalation underneath the buffer layer has not been considered in previous studies of Ca-intercalated epitaxial graphene. Furthermore, we find no evidence that either Ca or Mg intercalates between graphene layers. However, we do find that both Ca-QFSBLG and Mg-QFSBLG exhibit very low workfunctions of 3.68 and 3.78 eV, respectively, indicating high n-type doping. Upon exposure to ambient conditions, we find Ca-QFSBLG degrades rapidly, whereas Mg-QFSBLG remains remarkably stable.

cond-mat.mtrl-sci↗

arXiv2015

Hybrid Metal-Graphene Plasmons for Tunable Terahertz Technology

Among its many outstanding properties, graphene supports terahertz surface plasma waves -- sub-wavelength charge density oscillations connected with electromagnetic fields that are tightly localized near the surface[1,2]. When these waves are confined to finite-sized graphene, plasmon resonances emerge that are characterized by alternating charge accumulation at the opposing edges of the graphene. The resonant frequency of such a structure depends on both the size and the surface charge density, and can be electrically tuned throughout the terahertz range by applying a gate voltage[3,4]. The promise of tunable graphene THz plasmonics has yet to be fulfilled, however, because most proposed optoelectronic devices including detectors, filters, and modulators[5-10] desire near total modulation of the absorption or transmission, and require electrical contacts to the graphene -- constraints that are difficult to meet using existing plasmonic structures. We report here a new class of plasmon resonance that occurs in a hybrid graphene-metal structure. The sub-wavelength metal contacts form a capacitive grid for accumulating charge, while the narrow interleaved graphene channels, to first order, serves as a tunable inductive medium, thereby forming a structure that is resonantly-matched to an incident terahertz wave. We experimentally demonstrate resonant absorption near the theoretical maximum in readily-available, large-area graphene, ideal for THz detectors and tunable absorbers. We further predict that the use of high mobility graphene will allow resonant THz transmission near 100%, realizing a tunable THz filter or modulator. The structure is strongly coupled to incident THz radiation, and solves a fundamental problem of how to incorporate a tunable plasmonic channel into a device with electrical contacts.

cond-mat.mes-hall↗

arXiv2014

Revealing the electronic band structure of trilayer graphene on SiC: An angle-resolved photoemission study

In recent times, trilayer graphene has attracted wide attention owing to its stacking and electric field dependent electronic properties. However, a direct and well-resolved experimental visualization of its band structure has not yet been reported. In this work, we present angle resolved photoemission spectroscopy (ARPES) data which show with high resolution the electronic band structure of trilayer graphene obtained on α-SiC(0001) and β-SiC(111) via hydrogen intercalation. Electronic bands obtained from tight-binding calculations are fitted to the experimental data to extract the interatomic hopping parameters for Bernal and rhombohedral stacked trilayers. Low energy electron microscopy (LEEM) measurements demonstrate that the trilayer domains extend over areas of tens of square micrometers, suggesting the feasibility of exploiting this material in electronic and photonic devices. Furthermore, our results suggest that on SiC substrates the occurrence of rhombohedral stacked trilayer is significantly higher than in natural bulk graphite.

cond-mat.mtrl-sci↗

arXiv2010

Graphene to Graphane: Novel Electrochemical Conversion

A novel electrochemical means to generate atomic hydrogen, simplifying the synthesis and controllability of graphane formation on graphene is presented. High quality, vacuum grown epitaxial graphene (EG) was used as starting material for graphane conversion. A home-built electrochemical cell with Pt wire and exposed graphene as the anode and cathode, respectively, was used to attract H+ ions to react with the exposed graphene. Cyclic voltammetry of the cell revealed the potential of the conversion reaction as well as oxidation and reduction peaks, suggesting the possibility of electrochemically reversible hydrogenation. A sharp increase in D peak in the Raman spectra of EG, increase of D/G ratio, introduction of a peak at ~2930 cm-1 and respective peak shifts as well as a sharp increase in resistance showed the successful hydrogenation of EG. This conversion was distinguished from lattice damage by thermal reversal back to graphene at 1000°C.

physics.chem-ph↗

arXiv2010

Morphology Characterization of Argon-Mediated Epitaxial Graphene on C-face SiC

Epitaxial graphene layers were grown on the C-face of 4H- and 6H-SiC using an argon-mediated growth process. Variations in growth temperature and pressure were found to dramatically affect the morphological properties of the layers. The presence of argon during growth slowed the rate of graphene formation on the C-face and led to the observation of islanding. The similarity in the morphology of the islands and continuous films indicated that island nucleation and coalescence is the growth mechanism for C-face graphene.

cond-mat.mtrl-sci↗