arXiv subjects

Kevin Musick

Publications and source records attributed to Kevin Musick.

4 recordsLinked to original sources

arXiv2026

Characterization of Hydroxyls in Surface Oxide of Superconducting Tantalum and Their Mitigation in Quantum Circuits

Recently, tantalum (Ta) has gained attention in superconducting quantum circuits due to the longer coherence times achieved when replacing niobium (Nb) in capacitor pads. Previous literature shows that surface oxides that form upon ambient exposure on superconducting metals such as Ta, Al, and Nb host two-level system (TLS) defects, which are a leading source of microwave loss and decoherence. While the surface oxides of Nb and Al have been extensively studied, Ta oxides remain less well understood. Using secondary ion mass spectrometry of alpha-Ta films deposited at 300 mm wafer scale, we show for the first time that hydroxyls accumulate in the Ta suboxide region above the underlying Ta. Angle-resolved X-ray photoelectron spectroscopy shows that the surface region is dominated by Ta2O5, with sub-stoichiometric TaOx present in between the Ta2O5 and underlying Ta. The thickness of the tantalum oxide is confirmed by transmission electron microscopy. We demonstrate that [OH] incorporation can be suppressed by replacing the native oxide with an oxide formed during chemical mechanical planarization of alpha-Ta films. Our findings support the hypothesis that TLS defects are non-uniform within the oxide thickness and suggest hydroxyls as a probable molecular origin of these loss channels. Furthermore, we show the feasibility of plasma nitridization as a method to decrease hydroxyl loading on alpha-Ta surfaces. The modulation of hydroxyl content through surface engineering of alpha-Ta can enable the fabrication of more robust, high-coherence superconducting quantum circuits by addressing a potential TLS source.

cond-mat.supr-con↗

arXiv2026

Temperature-Dependent Dielectric Function of Tantalum Nitride Formed by Atomic Layer Deposition for Tunnel Barriers in Josephson Junctions

We report the dielectric functions of insulating tantalum nitride (TaN) films, deposited using atomic layer deposition (ALD) on 300 mm Si/SiO2 substrates, to demonstrate their suitability as tunnel barriers in tantalum-based Josephson junctions (JJ) for superconducting quantum circuits. The temperature-dependent ellipsometric angles were measured using ALD TaN films with nominal thicknesses of 13 nm and 25 nm at an incidence angle of 70 degrees, across photon energy ranges of 0.03 eV to 0.7 eV (80-300 K) and 0.5 eV to 6.5 eV (80-600 K). This data was used to develop a dispersion model for insulating ALD TaN films that incorporates a Tauc-Lorentz oscillator with a band gap of 1.5-1.8 eV to model the interband optical transitions. The extracted dielectric function of ALD TaN films shows an insulating behavior (mid-infrared transparency) at all temperatures and for both film thicknesses tested. ALD TaN does not exhibit infrared absorption due to free carriers, even at elevated temperatures, demonstrating its insulating nature, which is required for the tunnel barrier of the JJ in quantum applications. The results of transmission electron microscopy, including selected area electron diffraction, and X-ray diffraction are also discussed. Sputter depth-profile X-ray photoelectron spectroscopy (XPS) shows an N/Ta ratio of ~1.2 throughout the film. The lower band gap, low roughness, and thermal stability of ALD TaN compared to AlOx suggest the possibility of fabricating JJs with thicker barriers while achieving critical current densities required for qubits, better control of thickness and composition, reduced topography, and resistance to aging.

cond-mat.supr-con↗

arXiv2025

Ta-based Josephson junctions using insulating ALD TaN tunnel barriers

Josephson junctions form the core circuit element in superconducting quantum computing circuits, single flux quantum digital logic circuits, and sensing devices such as SQUIDs. Aluminum oxide has typically been used as the tunnel barrier. Its formation by exposure to low oxygen pressures at room temperature for short periods of time makes it susceptible to aging and limits the thermal budget of downstream processes. In this paper, we report the first demonstration of {\alpha}-Ta/insulating TaN/a-Ta superconductor/insulator/superconductor Josephson junctions fabricated on 300 mm wafers using CMOS-compatible processes. The junctions were fabricated on high-resistivity silicon substrates using standard processes available at 300 mm scale, including 193 nm optical lithography, ALD of TaN in a cluster tool, and chemical mechanical planarization to enable highly planar interfaces. Junction areas ranging from 0.03 um2 to 9 um2 with ALD TaN thickness between 2 nm and 7 nm were characterized. A critical current density of 76 uA/um2 was observed in junctions using 4 nm ALD TaN in the tunnel barrier. The dependence of Jc on ALD TaN layer thickness is analyzed, and the influence of junction geometry, packaging, and temperature on I-V characteristics is discussed. Junctions were retested after a period of 4 months to quantify junction aging. The potential of this novel material system and a 300 mm superconducting junction process flow to fabricate thermally and environmentally stable junctions is discussed. The vision of a Superconducting Quantum Process Design Kit for a Multi-Project Wafer program to enable rapid development and proliferation of superconducting quantum and digital digital logic systems is presented. This work represents the first step towards establishing such a Quantum Foundry, providing access to high quality qubits and single-flux quantum logic circuits at 300 mm wafer scale.

cond-mat.supr-con↗

arXiv2024

Oxidation Kinetics of Superconducting Niobium and a-Tantalum in Atmosphere at Short and Intermediate Time Scales

The integration of superconducting niobium and tantalum into superconducting quantum devices has been increasingly explored over the past few years. Recent developments have shown that two-level-systems (TLS) in the surface oxides of these superconducting films are a leading source of decoherence in quantum circuits, and understanding the surface oxidation kinetics of these materials is key to enabling scalability of these technologies. We analyze the nature of atmospheric oxidation of both niobium and a-tantalum surfaces at time scales relevant to fabrication, from sub-minute to two-week atmospheric exposure, employing a combination of x-ray photoelectron spectroscopy and transmission electron microscopy to monitor the growth of the surface oxides. The oxidation kinetics are modeled according to the Cabrera-Mott model of surface oxidation, and the model growth parameters are reported for both films. Our results indicate that niobium surface oxidation follows a consistent regime of inverse logarithmic growth for the entire time scale of the study, whereas a-Ta surface oxidation shows a clear transition between two inverse logarithmic growth regimes at time t = 1 hour, associated with the re-coordination of the surface oxide as determined by x-ray photoelectron spectroscopy analysis. Our findings provide a more complete understanding of the differences in atmospheric surface oxidation between Nb and a-Ta, particularly at short time scales, paving the way for the development of more robust fabrication control for quantum computing architectures.

cond-mat.supr-con↗