arXiv subjects

Khalid Hattar

Publications and source records attributed to Khalid Hattar.

15 recordsLinked to original sources

arXiv2026

Fragmenting Diffusion Pathways Confers Extraordinary Radiation Resistance in Refractory Multicomponent Alloys

The accumulation and growth of vacancy clusters under irradiation is a pivotal degradation mode for structural materials in extreme environments. Even tungsten undergoes rapid defect coarsening compromising its integrity. Here we show a tungsten multicomponent alloy that effectively fragments the vacancy diffusion network, kinetically trapping defects within localized domains. This effect originates from a broad spectrum of migration barriers and substantial vacancy-jump heterogeneity, which drives the interconnectivity of diffusion paths below the percolation threshold. Starving clusters of the necessary vacancy supply, irradiation experiments and atomic-scale defect characterizations confirm negligible defect growth as radiation doses increase by four orders of magnitude. These results provide a fundamental paradigm for percolation-engineered kinetics, offering a predictive pathway for tailoring defect diffusion and discovering inherently radiation-tolerant materials.

cond-mat.mtrl-sci↗

arXiv2024

Revealing the Evolution of Order in Materials Microstructures Using Multi-Modal Computer Vision

The development of high-performance materials for microelectronics, energy storage, and extreme environments depends on our ability to describe and direct property-defining microstructural order. Our present understanding is typically derived from laborious manual analysis of imaging and spectroscopy data, which is difficult to scale, challenging to reproduce, and lacks the ability to reveal latent associations needed for mechanistic models. Here, we demonstrate a multi-modal machine learning (ML) approach to describe order from electron microscopy analysis of the complex oxide La$_{1-x}$Sr$_x$FeO$_3$. We construct a hybrid pipeline based on fully and semi-supervised classification, allowing us to evaluate both the characteristics of each data modality and the value each modality adds to the ensemble. We observe distinct differences in the performance of uni- and multi-modal models, from which we draw general lessons in describing crystal order using computer vision.

cond-mat.mtrl-sci↗

arXiv2024

Structural Properties and Recrystallization Effects in Ion Beam Modified B20-type FeGe Films

Disordered iron germanium (FeGe) has recently garnered interest as a testbed for a variety of magnetic phenomena as well as for use in magnetic memory and logic applications. This is partially owing to its ability to host skyrmions and antiskyrmions -- nanoscale whirlpools of magnetic moments that could serve as information carriers in spintronic devices. In particular, a tunable skyrmion-antiskyrmion system may be created through precise control of the defect landscape in B20-phase FeGe, motivating developing methods to systematically tune disorder in this material and understand the ensuing structural properties. To this end, we investigate a route for modifying magnetic properties in FeGe. Specifically, we irradiate epitaxial B20-phase FeGe films with 2.8 MeV Au$^{4+}$ ions, which creates a dispersion of amorphized regions that may preferentially host antiskyrmions at densities controlled by the irradiation fluence. To further tune the disorder landscape, we conduct a systematic electron diffraction study with in-situ annealing, demonstrating the ability to recrystallize controllable fractions of the material at temperatures ranging from approximately 150$^{\circ}$ C to 250$^{\circ}$C. Finally, we describe the crystallization kinetics using the Johnson-Mehl-Avrami-Kolmogorov model, finding that the growth of crystalline grains is consistent with diffusion-controlled one-to-two dimensional growth with a decreasing nucleation rate.

cond-mat.mtrl-sci↗

arXiv2024

Interfacially enhanced superconductivity in Fe(Te,Se)/Bi4Te3 heterostructures

Realizing topological superconductivity by integrating high-transition-temperature ($T_C$) superconductors with topological insulators can open new paths for quantum computing applications. Here, we report a new approach for increasing the superconducting transition temperature ($T_{C}^{onset}$) by interfacing the unconventional superconductor Fe(Te,Se) with the topological insulator Bi-Te system in the low-Se doping regime, near where superconductivity vanishes in the bulk. The critical finding is that the $T_{C}^{onset}$ of Fe(Te,Se) increases from nominally non-superconducting to as high as 12.5 K when $Bi_2Te_3$ is replaced with the topological phase $Bi_4Te_3$. Interfacing Fe(Te,Se) with $Bi_4Te_3$ is also found to be critical for stabilizing superconductivity in monolayer films where $T_{C}^{onset}$ can be as high as 6 K. Measurements of the electronic and crystalline structure of the $Bi_4Te_3$ layer reveal that a large electron transfer, epitaxial strain, and novel chemical reduction processes are critical factors for the enhancement of superconductivity. This novel route for enhancing $T_C$ in an important epitaxial system provides new insight on the nature of interfacial superconductivity and a platform to identify and utilize new electronic phases.

cond-mat.supr-con↗

arXiv2024

Grain boundary metastability controls irradiation resistance in nanocrystalline metals

Grain boundaries (GBs) in polycrystalline materials are powerful sinks for irradiation defects. While standard theories assume that the sink efficiency of a grain boundary is defined solely by its character before irradiation, recent evidence conclusively shows that the irradiation sink efficiency is a highly dynamic property controlled by the intrinsic metastability of GBs under far-from-equilibrium irradiation conditions. In this paper, we reveal that the denuded (i.e., defect-free) zone, typically the signature of a strong sink, can collapse as irradiation damage accumulates. We propose a radiation damage evolution model that captures this behavior based on the emergence of a series of irradiation defect-enabled metastable GB microstate changes that dynamically alter the ability of the GB to absorb further damage. We show that these microstate changes control further defect absorption and give rise to the formation of a defect network that manifests itself as a net Nye-tensor signal detectable via lattice curvature experiments.

cond-mat.mtrl-sci↗

arXiv2024

Inducing a Tunable Skyrmion-Antiskyrmion System through Ion Beam Modification of FeGe Films

Skyrmions and antiskyrmions are nanoscale swirling textures of magnetic moments formed by chiral interactions between atomic spins in magnetic non-centrosymmetric materials and multilayer films with broken inversion symmetry. These quasiparticles are of interest for use as information carriers in next-generation, low-energy spintronic applications. To develop skyrmion-based memory and logic, we must understand skyrmion-defect interactions with two main goals -- determining how skyrmions navigate intrinsic material defects and determining how to engineer disorder for optimal device operation. Here, we introduce a tunable means of creating a skyrmion-antiskyrmion system by engineering the disorder landscape in FeGe using ion irradiation. Specifically, we irradiate epitaxial B20-phase FeGe films with 2.8 MeV Au$^{4+}$ ions at varying fluences, inducing amorphous regions within the crystalline matrix. Using low-temperature electrical transport and magnetization measurements, we observe a strong topological Hall effect with a double-peak feature that serves as a signature of skyrmions and antiskyrmions. These results are a step towards the development of information storage devices that use skyrmions and anitskyrmions as storage bits and our system may serve as a testbed for theoretically predicted phenomena in skyrmion-antiskyrmion crystals.

cond-mat.mtrl-sci↗

arXiv2023

Ruddlesden-Popper chalcogenides push the limit of mechanical stiffness and glass-like thermal conductivity in single crystals

Insulating materials featuring ultralow thermal conductivity for diverse applications also require robust mechanical properties. Conventional thinking, however, which correlates strong bonding with high atomic-vibration-mediated heat conduction, led to diverse weakly bonded materials that feature ultralow thermal conductivity and low elastic moduli. One must, therefore, search for strongly-bonded single crystals in which heat transport is impeded by other means. Here, we report intrinsic, glass-like, ultralow thermal conductivity and ultrahigh elastic-modulus/thermal-conductivity ratio in single-crystalline Ruddlesden-Popper Ban+1ZrnS3n+1, n = 2,3, which are derivatives of BaZrS3. Their key features are strong anharmonicity and intra-unit-cell rock-salt blocks. The latter produce strongly bonded intrinsic superlattices, impeding heat conduction by broadband reduction of phonon velocities and mean free paths and concomitant strong phonon localization. The present study initiates a paradigm of mechanically stiff phonon glasses.

cond-mat.mtrl-sci↗

arXiv2023

Unsupervised segmentation of irradiation$\unicode{x2010}$induced order$\unicode{x2010}$disorder phase transitions in electron microscopy

We present a method for the unsupervised segmentation of electron microscopy images, which are powerful descriptors of materials and chemical systems. Images are oversegmented into overlapping chips, and similarity graphs are generated from embeddings extracted from a domain$\unicode{x2010}$pretrained convolutional neural network (CNN). The Louvain method for community detection is then applied to perform segmentation. The graph representation provides an intuitive way of presenting the relationship between chips and communities. We demonstrate our method to track irradiation$\unicode{x2010}$induced amorphous fronts in thin films used for catalysis and electronics. This method has potential for "on$\unicode{x2010}$the$\unicode{x2010}$fly" segmentation to guide emerging automated electron microscopes.

cond-mat.mtrl-sci↗

arXiv2023

Alloying Effects on the Microstructure and Properties of Laser Additively Manufactured Tungsten Materials

A large body of literature within the additive manufacturing (AM) community has focused on successfully creating stable tungsten (W) microstructures due to significant interest in its application for extreme environments. However, solidification cracking and additional embrittling features at grain boundaries have resulted in poorly performing microstructures, stymying the application of AM as a manufacturing technique for W. Several alloying strategies, such as ceramic particles and ductile elements, have emerged with the promise to eliminate solidification cracking while simultaneously enhancing stability against recrystallization. In this work, we provide new insights regarding the defects and microstructural features that result from the introduction of ZrC for grain refinement and NiFe as a ductile reinforcement phase - in addition to the resulting thermophysical and mechanical properties. ZrC is shown to promote microstructural stability with increased hardness due to the formation of ZrO2 dispersoids. Conversely, NiFe forms into micron-scale FCC phase regions within a BCC W matrix, producing enhanced toughness relative to pure AM W. A combination of these effects is realized in the WNiFe+ZrC system and demonstrates that complex chemical environments coupled with the tuning of AM microstructures provides an effective pathway for enabling laser AM W materials with enhanced stability and performance.

cond-mat.mtrl-sci↗

arXiv2022

An Accessible Method for Simulating Charged-Particle Optics, with Examples for Transmission Electron Microscopy

The transmission electron microscope (TEM) has become an essential tool for innovation in nanoscience, material science, and biology. Despite these instruments being widely used across both industry and academia, academics may hesitate to propose substantial modifications to the optical setup due to the instrument's significant purchase price, fear of voiding the service contract, or downtime being unacceptable in shared user facilities. For instruments found in industry, similarly the risk-reward balance makes substantive modifications untenable. This limits the development of radically new optical geometries, and with the performance of the TEM largely being dictated by the specification of the objective lens pole-piece, exploring novel designs may be valuable. Alternatively, potential lens designs can be analyzed rapidly and inexpensively using finite element analysis multiphysics simulation packages. Several are available, but here COMSOL Multiphysics was used, which is readily available in many universities. Changes to the geometry or materials of the lens can be investigated without any need to disassemble, reassemble, and realign the TEM column. Here we demonstrate an intuitive and accessible method to simulate charged particle optics using this 'digital twin' approach, with the hope that this encourages new creative and sustainable grassroots innovation in TEM lens design and microscope modification.

physics.ins-det↗

arXiv2021

The dynamic evolution of swelling in nickel concentrated solid solution alloys through in situ property monitoring

Defects and microstructural features spanning the atomic level to the microscale play deterministic roles in the expressed properties of materials. Yet studies of material evolution in response to environmental stimuli most often correlate resulting performance with one dominant microstructural feature only. Here, the dynamic evolution of swelling in a series of Ni-based concentrated solid solution alloys under high-temperature irradiation exposure is observed using continuous, in situ measurements of thermoelastic properties in bulk specimens. Unlike traditional evaluation techniques which account only for volumetric porosity identified using electron microscopy, direct property evaluation provides an integrated response across all defect length scales. In particular, the evolution in elastic properties during swelling is found to depend significantly on the entire size spectrum of defects, from the nano- to meso-scales, some of which are not resolvable in imaging. Observed changes in thermal transport properties depend sensitively on the partitioning of electronic and lattice thermal conductivity. This emerging class of in situ experiments, which directly measure integrated performance in relevant conditions, provides unique insight into material dynamics otherwise unavailable using traditional methods.

cond-mat.mtrl-sci↗

arXiv2021

Percolation of Ion-Irradiation-Induced Disorder in Complex Oxide Interfaces

Mastery of order-disorder processes in highly non-equilibrium nanostructured oxides has significant implications for the development of emerging energy technologies. However, we are presently limited in our ability to quantify and harness these processes at high spatial, chemical, and temporal resolution, particularly in extreme environments. Here we describe the percolation of disorder at the model oxide interface LaMnO$_3$ / SrTiO$_3$, which we visualize during in situ ion irradiation in the transmission electron microscope. We observe the formation of a network of disorder during the initial stages of ion irradiation and track the global progression of the system to full disorder. We couple these measurements with detailed structural and chemical probes, examining possible underlying defect mechanisms responsible for this unique percolative behavior.

cond-mat.mtrl-sci↗

arXiv2020

Solid-state dewetting instability in thermally-stable nanocrystalline binary alloys

Practical applications of nanocrystalline metallic thin films are often limited by instabilities. In addition to grain growth, the thin film itself can become unstable and collapse into islands through solid-state dewetting. Selective alloying can improve nanocrystalline stability, but the impact of this approach on dewetting is not clear. In this study, two alloys that exhibit nanocrystalline thermal stability as ball milled powders are evaluated as thin films. While both alloys demonstrated dewetting behavior following annealing, the severity decreased in more dilute compositions. Ultimately, a balance may be struck between nanocrystalline stability and thin film structural stability by tuning dopant concentration.

cond-mat.mtrl-sci↗

arXiv2019

Amorphous intergranular films mitigate radiation damage in nanocrystalline Cu-Zr

Nanocrystalline metals are promising radiation tolerant materials due to their large interfacial volume fraction, but irradiation-induced grain growth can eventually degrade any improvement in radiation tolerance. Therefore, methods to limit grain growth and simultaneously improve the radiation tolerance of nanocrystalline metals are needed. Amorphous intergranular films are unique grain boundary structures that are predicted to have improved sink efficiencies due to their increased thickness and amorphous structure, while also improving grain size stability. In this study, ball milled nanocrystalline Cu-Zr alloys are heat treated to either have only ordered grain boundaries or to contain amorphous intergranular films distributed within the grain boundary network, and are then subjected to in situ transmission electron microscopy irradiation and ex situ irradiation. Differences in defect density and grain growth due to grain boundary complexion type are then investigated. When amorphous intergranular films are incorporated within the material, fewer and smaller defect clusters are observed while grain growth is also limited, leading to nanocrystalline alloys with improved radiation tolerance.

cond-mat.mtrl-sci↗

arXiv2018

In situ high-cycle fatigue reveals the importance of grain boundary structure in nanocrystalline Cu-Zr

Nanocrystalline metals typically have high fatigue strengths, but low resistance to crack propagation. Amorphous intergranular films are disordered grain boundary complexions that have been shown to delay crack nucleation and slow crack propagation during monotonic loading by diffusing grain boundary strain concentrations, suggesting they may also be beneficial for fatigue properties. To probe this hypothesis, in situ transmission electron microscopy fatigue cycling is performed on Cu-1 at.% Zr thin films thermally treated to have either only ordered grain boundaries or to contain amorphous intergranular films. The sample with only ordered grain boundaries experienced grain coarsening at crack initiation followed by unsteady crack propagation and extensive nanocracking, whereas the sample containing amorphous intergranular films had no grain coarsening at crack initiation followed by steady crack propagation and distributed plastic activity. Microstructural design for control of these behaviors through simple thermal treatments can allow for the improvement of nanocrystalline metal fatigue toughness.

cond-mat.mtrl-sci↗