arXiv subjects

Ki Youl Yang

Publications and source records attributed to Ki Youl Yang.

29 records · Page 2Linked to original sources

arXiv2017

Bridging ultra-high-Q devices and photonic circuits

Optical microcavities are essential in numerous technologies and scientific disciplines. However, their application in many areas relies exclusively upon discrete microcavities in order to satisfy challenging combinations of ultra-low-loss performance (high cavity-Q-factor) and cavity design requirements. Indeed, finding a microfabrication bridge connecting ultra-high-Q device functions with micro and nanophotonic circuits has been a long-term priority of the microcavity field. Here, an integrated ridge resonator having a record Q factor over 200 million is presented. Its ultra-low-loss and flexible cavity design brings performance that has been the exclusive domain of discrete silica and crytalline microcavity devices to integrated systems. Two distinctly different devices are demonstrated: soliton sources with electronic repetition rates and high-coherence Brillouin lasers. This multi-device capability and performance from a single integrated cavity platform represents a critical advance for future nanophotonic circuits and systems.

physics.optics↗

arXiv2017

An Integrated-Photonics Optical-Frequency Synthesizer

Integrated-photonics microchips now enable a range of advanced functionalities for high-coherence applications such as data transmission, highly optimized physical sensors, and harnessing quantum states, but with cost, efficiency, and portability much beyond tabletop experiments. Through high-volume semiconductor processing built around advanced materials there exists an opportunity for integrated devices to impact applications cutting across disciplines of basic science and technology. Here we show how to synthesize the absolute frequency of a lightwave signal, using integrated photonics to implement lasers, system interconnects, and nonlinear frequency comb generation. The laser frequency output of our synthesizer is programmed by a microwave clock across 4 THz near 1550 nm with 1 Hz resolution and traceability to the SI second. This is accomplished with a heterogeneously integrated III/V-Si tunable laser, which is guided by dual dissipative-Kerr-soliton frequency combs fabricated on silicon chips. Through out-of-loop measurements of the phase-coherent, microwave-to-optical link, we verify that the fractional-frequency instability of the integrated photonics synthesizer matches the $7.0*10^{-13}$ reference-clock instability for a 1 second acquisition, and constrain any synthesis error to $7.7*10^{-15}$ while stepping the synthesizer across the telecommunication C band. Any application of an optical frequency source would be enabled by the precision optical synthesis presented here. Building on the ubiquitous capability in the microwave domain, our results demonstrate a first path to synthesis with integrated photonics, leveraging low-cost, low-power, and compact features that will be critical for its widespread use.

physics.app-ph↗

arXiv2017

Counter-propagating solitons in microresonators

Solitons occur in many physical systems when a nonlinearity compensates wave dispersion. Their recent formation in microresonators opens a new research direction for nonlinear optical physics and provides a platform for miniaturization of spectroscopy and frequency metrology systems. These microresonator solitons orbit around a closed waveguide path and produce a repetitive output pulse stream at a rate set by the round-trip time. In this work counter-propagating solitons that simultaneously orbit in an opposing sense (clockwise/counter-clockwise) are studied. Despite sharing the same spatial mode family, their round-trip times can be precisely and independently controlled. Furthermore, a state is possible in which both the relative optical phase and relative repetition rates of the distinct soliton streams are locked. This state allows a single resonator to produce dual-soliton frequency-comb streams having different repetition rates, but with high relative coherence useful in both spectroscopy and laser ranging systems.

physics.optics↗

arXiv2016

Single-mode dispersive waves and soliton microcomb dynamics

Dissipative Kerr solitons are self-sustaining optical wavepackets in resonators. They use the Kerr nonlinearity to both compensate dispersion and to offset optical loss. Besides providing insights into nonlinear resonator physics, they can be applied in frequency metrology, precision clocks, and spectroscopy. Like other optical solitons, the dissipative Kerr soliton can radiate power in the form of a dispersive wave through a process that is the optical analogue of Cherenkov radiation. Dispersive waves typically consist of an ensemble of optical modes. A limiting case is demonstrated in which the dispersive wave is concentrated into a single cavity mode. In this limit, its interaction with the soliton is shown to induce bistable behavior in the spectral and temporal properties of the soliton. Also, an operating point of enhanced repetition-rate stability is predicted and observed. The single-mode dispersive wave can therefore provide quiet states of soliton comb operation useful in many applications.

physics.optics↗

arXiv2016

Microresonator Soliton Dual-Comb Spectroscopy

Rapid characterization of optical and vibrational spectra with high resolution can identify species in cluttered environments and is important for assays and early alerts. In this regard, dual-comb spectroscopy has emerged as a powerful approach to acquire nearly instantaneous Raman and optical spectra with unprecedented resolution. Spectra are generated directly in the electrical domain and avoid bulky mechanical spectrometers. Recently, a miniature soliton-based comb has emerged that can potentially transfer the dual-comb method to a chip platform. Unlike earlier microcombs, these new devices achieve high-coherence, pulsed mode locking. They generate broad, reproducible spectral envelopes, which is essential for dual-comb spectroscopy. Here, dual-comb spectroscopy is demonstrated using these devices. This work shows the potential for integrated, high signal-to-noise spectroscopy with fast acquisition rates.

physics.optics↗

arXiv2016

Stokes Soliton in Optical Microcavities

Solitons are wavepackets that resist dispersion through a self-induced potential well. They are studied in many fields, but are especially well known in optics on account of the relative ease of their formation and control in optical fiber waveguides. Besides their many interesting properties, solitons are important to optical continuum generation, in mode-locked lasers and have been considered as a natural way to convey data over great distances. Recently, solitons have been realized in microcavities thereby bringing the power of microfabrication methods to future applications. This work reports a soliton not previously observed in optical systems, the Stokes soliton. The Stokes soliton forms and regenerates by optimizing its Raman interaction in space and time within an optical-potential well shared with another soliton. The Stokes and the initial soliton belong to distinct transverse mode families and benefit from a form of soliton trapping that is new to microcavities and soliton lasers in general. The discovery of a new optical soliton can impact work in other areas of photonics including nonlinear optics and spectroscopy.

physics.optics↗

arXiv2016

Spatial-mode-interaction-induced dispersive-waves and their active tuning in microresonators

The nonlinear propagation of optical pulses in dielectric waveguides and resonators provides a laboratory to investigate a wide range of remarkable interactions. Many of the resulting phenomena find applications in optical systems. One example is dispersive wave generation, the optical analog of Cherenkov radiation. These waves have an essential role in fiber spectral broadeners that are routinely used in spectrocopy and metrology. Dispersive waves form when a soliton pulse begins to radiate power as a result of higher-order dispersion. Recently, dispersive wave generation in microcavities has been reported by phase matching the waves to dissipative Kerr cavity (DKC) solitons. Here, it is shown that spatial mode interactions within a microcavity can also be used to induce dispersive waves. These interactions are normally avoided altogether in DKC soliton generation. The soliton self frequency shift is also shown to induce fine tuning control of the dispersive wave frequency. Both this mechanism and spatial mode interactions provide a new method to spectrally control these important waves.

physics.optics↗

arXiv2015

Phase Coherent Link of an Atomic Clock to a Self-Referenced Microresonator Frequency Comb

The counting and control of optical cycles of light has become common with modelocked laser frequency combs. But even with advances in laser technology, modelocked laser combs remain bulk-component devices that are hand-assembled. In contrast, a frequency comb based on the Kerr-nonlinearity in a dielectric microresonator will enable frequency comb functionality in a micro-fabricated and chip-integrated package suitable for use in a wide-range of environments. Such an advance will significantly impact fields ranging from spectroscopy and trace gas sensing, to astronomy, communications, atomic time keeping and photonic data processing. Yet in spite of the remarkable progress shown over the past years, microresonator frequency combs ("microcombs") have still been without the key function of direct f-2f self-referencing and phase-coherent frequency control that will be critical for enabling their full potential. Here we realize these missing elements using a low-noise 16.4 GHz silicon chip microcomb that is coherently broadened from its initial 1550 nm wavelength and subsequently f-2f self-referenced and phase-stabilized to an atomic clock. With this advance, we not only realize the highest repetition rate octave-span frequency comb ever achieved, but we highlight the low-noise microcomb properties that support highest atomic clock limited frequency stability.

physics.optics↗

arXiv2015

Generation of high-stability solitons at microwave rates on a silicon chip

Because they coherently link radio/microwave-rate electrical signals with optical-rate signals derived from lasers and atomic transitions, frequency combs are having a remarkably broad impact on science and technology. Integrating these systems on a photonic chip would revolutionize instrumentation, time keeping, spectroscopy, navigation and potentially create new mass-market applications. A key element of such a system-on-a-chip will be a mode-locked comb that can be self-referenced. The recent demonstration of soliton pulses from a microresonator has placed this goal within reach. However, to provide the requisite link between microwave and optical rate signals soliton generation must occur within the bandwidth of electronic devices. So far this is possible in crytalline devices, but not chip-based devices. Here, a monolithic comb that generates electronic-rate soliton pulses is demonstrated.

physics.optics↗

arXiv2015

Broadband dispersion engineered microresonator on-a-chip

Control of dispersion in fibre optical waveguides is of critical importance to optical fibre communications systems and more recently for continuum generation from the ultraviolet to the mid-infrared. The wavelength at which the group velocity dispersion crosses zero can be set by varying fibre core diameter or index step. Moreover, sophisticated methods to manipulate higher-order dispersion so as shape and even flatten dispersion over wide bandwidths are possible using multi-cladding fibre. Here we introduce design and fabrication techniques that allow analogous dispersion control in chip-integrated optical microresonators, and thereby demonstrate higher-order, wide-bandwidth dispersion control over an octave of spectrum. Importantly, the fabrication method we employ for dispersion control simultaneously permits optical Q factors above 100 million, which is critical for efficient operation of nonlinear optical oscillators. Dispersion control in high Q systems has taken on greater importance in recent years with increased interest in chip-integrable optical frequency combs.

physics.optics↗

arXiv2011

Ultra-high-Q wedge-resonator on a silicon chip

Ultra-high-Q optical resonators are being studied across a wide range of research subjects including quantum information, nonlinear optics, cavity optomechanics, and telecommunications. Here, we demonstrate a new, resonator on-a-chip with a record Q factor of 875 million, surpassing even microtoroids. Significantly, these devices avoid a highly specialized processing step that has made it difficult to integrate microtoroids with other photonic devices and to also precisely control their size. Thus, these devices not only set a new benchmark for Q factor on a chip, but also provide, for the first time, full compatibility of this important device class with conventional semiconductor processing. This feature will greatly expand the possible kinds of system on a chip functions enabled by ultra-high-Q devices.

physics.optics↗