Searcharxiv⌕ Search

arXiv subjects

Kiran Kuchi

Publications and source records attributed to Kiran Kuchi.

12 recordsLinked to original sources
arXiv2024

Orthogonal Time Frequency Multiplexing (OTFDM): A Novel Waveform Targeted for IMT-2030

The rapid evolution of the International Mobile Telecommunications (IMT) landscape has prompted the International Telecommunications Union Working Party 5D (ITU WP5D) to outline the framework for IMT-2030 and beyond. This next-generation initiative seeks to meet the diverse demands of future networks, with key objectives including hyper-low latency, enhanced energy efficiency, and robust support for high mobility. Current 5th generation (5G) technologies employ waveforms like Orthogonal Frequency Division Multiplexing (OFDM) and Discrete Fourier Transform Spread Orthogonal Frequency Division Multiplexing (DFT-s-OFDM). However, these waveforms are insufficient to fully meet the stringent requirements of next-generation communication systems. This paper introduces a novel waveform, Orthogonal Time Frequency Division Multiplexing (OTFDM), designed to address the limitations of existing waveforms. OTFDM achieves ultra-low latency by enabling single-shot transmission of data and Reference Signals (RS) within a single symbol. Furthermore, OTFDM supports high mobility with improved resilience to Doppler shifts and enhances power amplifier efficiency through its low Peak-to-Average Power Ratio (PAPR) characteristics. The proposed waveform incorporates advanced signal processing techniques, including time-frequency multiplexing and frequency domain spectrum shaping, to mitigate inter-symbol interference (ISI). These techniques enable accurate per-symbol channel estimation, thus supporting higher-order modulations even at higher user speeds. Extensive simulations validate the efficacy of OTFDM, demonstrating its capability to support user speeds up to 500 Km/h with minimal RS overhead. This paper explores the technical aspects of OTFDM and discusses its potential implications for the next-generation wireless communication systems.

eess.SP↗
arXiv2023

Optimizing the Placement and Beamforming of RIS in Cellular Networks: A System-Level Modeling Perspective

In this letter, we present in detail the system-level modeling of reconfigurable intelligent surface (RIS)-assisted cellular systems by considering a 3-dimensional channel model between base station, RIS, and user. We prove that the optimal placement of RIS to achieve wider coverage is exactly opposite to the base station, under the constraint of single RIS in each sector. We propose a novel beamforming design for RIS-assisted cellular systems and derive the achievable sum rate in the presence of ideal, discrete, and random phase shifters at RIS. Through extensive system-level evaluations, we then show that the proposed beamforming design achieves significant improvements as compared to the state-of-the-art algorithms.

cs.IT↗
arXiv2019

Low PAPR Reference Signal Transceiver Design for 3GPP 5G NR Uplink

Low peak-to-average-power ratio (PAPR) transmissions significantly improve the cell coverage as they enable high power transmissions without saturating the power amplifier. A new modulation scheme, namely, pi/2-BPSK was introduced in the Rel-15 3GPP 5G NR specifications to support low PAPR transmissions using the DFT-spread-OFDM waveform in the uplink transmissions. To enable data demodulation using this modulation scheme, Zadoff-Chu sequences are used as reference signals. However, the PAPR of Zadoff-Chu sequences is higher when compared to the pi/2-BPSK data. Therefore, even though the data transmissions have low PAPR, the high PAPR of the reference signal limits the cell coverage in the uplink of Rel-15 3GPP 5G NR design. In this paper we propose a transceiver design which minimizes the PAPR of the reference signals to avoid the aforementioned issues. We show via simulations that the proposed architecture results in more than 2 dB PAPR reduction when compared to the existing design. In addition, when multiple stream transmission is supported, we show that PAPR of the reference signal transmission remains the same for any stream (also referred to as baseband antenna port in 3GPP terminology) when the proposed transceiver design is employed, which is not the case for the current 3GPP 5G NR design

eess.SP↗
arXiv2019

A Novel Beamformed Control Channel Design for LTE with Full Dimension-MIMO

The Full Dimension-MIMO (FD-MIMO) technology is capable of achieving huge improvements in network throughput with simultaneous connectivity of a large number of mobile wireless devices, unmanned aerial vehicles, and the Internet of Things (IoT). In FD-MIMO, with a large number of antennae at the base station and the ability to perform beamforming, the capacity of the physical downlink shared channel (PDSCH) has increased a lot. However, the current specifications of the 3rd Generation Partnership Project (3GPP) does not allow the base station to perform beamforming techniques for the physical downlink control channel (PDCCH), and hence, PDCCH has neither the capacity nor the coverage of PDSCH. Therefore, PDCCH capacity will still limit the performance of a network as it dictates the number of users that can be scheduled at a given time instant. In Release 11, 3GPP introduced enhanced PDCCH (EPDCCH) to increase the PDCCH capacity at the cost of sacrificing the PDSCH resources. The problem of enhancing the PDCCH capacity within the available control channel resources has not been addressed yet in the literature. Hence, in this paper, we propose a novel beamformed PDCCH (BF-PDCCH) design which is aligned to the 3GPP specifications and requires simple software changes at the base station. We rely on the sounding reference signals transmitted in the uplink to decide the best beam for a user and ingeniously schedule the users in PDCCH. We perform system level simulations to evaluate the performance of the proposed design and show that the proposed BF-PDCCH achieves larger network throughput when compared with the current state of art algorithms, PDCCH and EPDCCH schemes.

eess.SP↗
arXiv2018

Streaming Video QoE Modeling and Prediction: A Long Short-Term Memory Approach

HTTP based adaptive video streaming has become a popular choice of streaming due to the reliable transmission and the flexibility offered to adapt to varying network conditions. However, due to rate adaptation in adaptive streaming, the quality of the videos at the client keeps varying with time depending on the end-to-end network conditions. Further, varying network conditions can lead to the video client running out of playback content resulting in rebuffering events. These factors affect the user satisfaction and cause degradation of the user quality of experience (QoE). It is important to quantify the perceptual QoE of the streaming video users and monitor the same in a continuous manner so that the QoE degradation can be minimized. However, the continuous evaluation of QoE is challenging as it is determined by complex dynamic interactions among the QoE influencing factors. Towards this end, we present LSTM-QoE, a recurrent neural network based QoE prediction model using a Long Short-Term Memory (LSTM) network. The LSTM-QoE is a network of cascaded LSTM blocks to capture the nonlinearities and the complex temporal dependencies involved in the time varying QoE. Based on an evaluation over several publicly available continuous QoE databases, we demonstrate that the LSTM-QoE has the capability to model the QoE dynamics effectively. We compare the proposed model with the state-of-the-art QoE prediction models and show that it provides superior performance across these databases. Further, we discuss the state space perspective for the LSTM-QoE and show the efficacy of the state space modeling approaches for QoE prediction.

cs.MM↗
arXiv2018

Modeling Continuous Video QoE Evolution: A State Space Approach

A rapid increase in the video traffic together with an increasing demand for higher quality videos has put a significant load on content delivery networks in the recent years. Due to the relatively limited delivery infrastructure, the video users in HTTP streaming often encounter dynamically varying quality over time due to rate adaptation, while the delays in video packet arrivals result in rebuffering events. The user quality-of-experience (QoE) degrades and varies with time because of these factors. Thus, it is imperative to monitor the QoE continuously in order to minimize these degradations and deliver an optimized QoE to the users. Towards this end, we propose a nonlinear state space model for efficiently and effectively predicting the user QoE on a continuous time basis. The QoE prediction using the proposed approach relies on a state space that is defined by a set of carefully chosen time varying QoE determining features. An evaluation of the proposed approach conducted on two publicly available continuous QoE databases shows a superior QoE prediction performance over the state-of-the-art QoE modeling approaches. The evaluation results also demonstrate the efficacy of the selected features and the model order employed for predicting the QoE. Finally, we show that the proposed model is completely state controllable and observable, so that the potential of state space modeling approaches can be exploited for further improving QoE prediction.

cs.MM↗
arXiv2015

Performance of Cloud Radio Networks

Cloud radio networks coordinate transmission among base stations (BSs) to reduce the interference effects, particularly for the cell-edge users. In this paper, we analyze the performance of a cloud network with static clustering where geographically close BSs form a cloud network of cooperating BSs. Because, of finite cooperation, the interference in a practical cloud radio cannot be removed and in this paper, the distance based interference is taken into account in the analysis. In particular, we consider centralized zero forcing equalizer and dirty paper precoding for cancelling the interference. Bounds are developed on the signal-to-interference ratio distribution and achievable rate with full and limited channel feedback from the cluster users. The adverse effect of finite clusters on the achievable rate is quantified. We show that, the number of cooperating BSs is more crucial than the cluster area when full channel state information form the cluster is available for precoding. Also, we study the impact of limiting the channel state information on the achievable rate. We show that even with a practically feasible feedback of about five to six channel states from each user, significant gain in mean rate and cell edge rate compared to conventional cellular systems can be obtained.

cs.IT↗
arXiv2014

Performance of PZF and MMSE Receivers in Cellular Networks with Multi-User Spatial Multiplexing

This paper characterizes the performance of cellular networks employing multiple antenna open-loop spatial multiplexing techniques. We use a stochastic geometric framework to model distance depended inter cell interference. Using this framework, we analyze the coverage and rate using two linear receivers, namely, partial zero-forcing (PZF) and minimum-mean-square-estimation (MMSE) receivers. Analytical expressions are obtained for coverage and rate distribution that are suitable for fast numerical computation. In the case of the PZF receiver, we show that it is not optimal to utilize all the receive antenna for canceling interference. With $α$ as the path loss exponent, $N_t$ transmit antenna, $N_r$ receive antenna, we show that it is optimal to use $N_t\left\lceil\left(1-\frac{2}α\right) \left( \frac{N_r}{N_t} -\frac{1}{2}\right)\right\rceil$ receive antennas for interference cancellation and the remaining antennas for signal enhancement (array gain). For both PZF and MMSE receivers, we observe that increasing the number of data streams provides an improvement in the mean data rate with diminishing returns. Also transmitting $N_r$ streams is not optimal in terms of the mean sum rate. We observe that increasing the SM rate with a PZF receiver always degrades the cell edge data rate while the performance with MMSE receiver is nearly independent of the SM rate.

cs.IT↗
arXiv2013

Performance Limits of a Cloud Radio

Cooperation in a cellular network is seen as a key technique in managing other cell interference to observe a gain in achievable rate. In this paper, we present the achievable rate regions for a cloud radio network using a sub-optimal zero forcing equalizer with dirty paper precoding. We show that when complete channel state information is available at the cloud, rates close to those achievable with total interference cancellation can be achieved. With mean capacity gains, of up to 2 fold over the conventional cellular network in both uplink and downlink, this precoding scheme shows great promise for implementation in a cloud radio network. To simplify the analysis, we use a stochastic geometric framework based of Poisson point processes instead of the traditional grid based cellular network model. We also study the impact of limiting the channel state information and geographical clustering to limit the cloud size on the achievable rate. We have observed that using this zero forcing-dirty paper coding technique, the adverse effect of inter-cluster interference can be minimized thereby transforming an interference limited network into a noise limited network as experienced by an average user in the network for low operating signal-to-noise-ratios. However, for higher signal-to-noise-ratios, both the average achievable rate and cell-edge achievable rate saturate as observed in literature. As the implementation of dirty paper coding is practically not feasible, we present a practical design of a cloud radio network using cloud a minimum mean square equalizer for processing the uplink streams and use Tomlinson-Harashima precoder as a sub-optimal substitute for a dirty paper precoder in downlink.

cs.IT↗
arXiv2013

Exploiting Spatial Interference Alignment and Opportunistic Scheduling in the Downlink of Interference Limited Systems

In this paper we analyze the performance of single stream and multi-stream spatial multiplexing (SM) systems employing opportunistic scheduling in the presence of interference. In the proposed downlink framework, every active user reports the post-processing signal-to-interference-plus-noise-power-ratio (post-SINR) or the receiver specific mutual information (MI) to its own transmitter using a feedback channel. The combination of scheduling and multi-antenna receiver processing leads to substantial interference suppression gain. Specifically, we show that opportunistic scheduling exploits spatial interference alignment (SIA) property inherent to a multi-user system for effective interference mitigation. We obtain bounds for the outage probability and the sum outage capacity for single stream and multi stream SM employing real or complex encoding for a symmetric interference channel model. The techniques considered in this paper are optimal in different operating regimes. We show that the sum outage capacity can be maximized by reducing the SM rate to a value less than the maximum allowed value. The optimum SM rate depends on the number of interferers and the number of available active users. In particular, we show that the generalized multi-user SM (MU SM) method employing real-valued encoding provides a performance that is either comparable, or significantly higher than that of MU SM employing complex encoding. A combination of analysis and simulation is used to describe the trade-off between the multiplexing rate and sum outage capacity for different antenna configurations.

cs.IT↗
arXiv2013

Limiting Performance of Conventional and Widely Linear DFT-precoded-OFDM Receivers in Wideband Frequency Selective Channels

This paper describes the limiting behavior of linear and decision feedback equalizers (DFEs) in single/multiple antenna systems employing real/complex-valued modulation alphabets. The wideband frequency selective channel is modeled using a Rayleigh fading channel model with infinite number of time domain channel taps. Using this model, we show that the considered equalizers offer a fixed post signal-to-noise-ratio (post-SNR) at the equalizer output that is close to the matched filter bound (MFB). General expressions for the post-SNR are obtained for zero-forcing (ZF) based conventional receivers as well as for the case of receivers employing widely linear (WL) processing. Simulation is used to study the bit error rate (BER) performance of both MMSE and ZF based receivers. Results show that the considered receivers advantageously exploit the rich frequency selective channel to mitigate both fading and inter-symbol-interference (ISI) while offering a performance comparable to the MFB.

cs.IT↗