arXiv subjects

Kiryung Lee

Publications and source records attributed to Kiryung Lee.

At least 37 records · Page 2Linked to original sources

arXiv2017

Blind Gain and Phase Calibration via Sparse Spectral Methods

Blind gain and phase calibration (BGPC) is a bilinear inverse problem involving the determination of unknown gains and phases of the sensing system, and the unknown signal, jointly. BGPC arises in numerous applications, e.g., blind albedo estimation in inverse rendering, synthetic aperture radar autofocus, and sensor array auto-calibration. In some cases, sparse structure in the unknown signal alleviates the ill-posedness of BGPC. Recently there has been renewed interest in solutions to BGPC with careful analysis of error bounds. In this paper, we formulate BGPC as an eigenvalue/eigenvector problem, and propose to solve it via power iteration, or in the sparsity or joint sparsity case, via truncated power iteration. Under certain assumptions, the unknown gains, phases, and the unknown signal can be recovered simultaneously. Numerical experiments show that power iteration algorithms work not only in the regime predicted by our main results, but also in regimes where theoretical analysis is limited. We also show that our power iteration algorithms for BGPC compare favorably with competing algorithms in adversarial conditions, e.g., with noisy measurement or with a bad initial estimate.

cs.IT↗

arXiv2017

Fast and guaranteed blind multichannel deconvolution under a bilinear system model

We consider the multichannel blind deconvolution problem where we observe the output of multiple channels that are all excited with the same unknown input. From these observations, we wish to estimate the impulse responses of each of the channels. We show that this problem is well-posed if the channels follow a bilinear model where the ensemble of channel responses is modeled as lying in a low-dimensional subspace but with each channel modulated by an independent gain. Under this model, we show how the channel estimates can be found by minimizing a quadratic functional over a non-convex set. We analyze two methods for solving this non-convex program, and provide performance guarantees for each. The first is a method of alternating eigenvectors that breaks the program down into a series of eigenvalue problems. The second is a truncated power iteration, which can roughly be interpreted as a method for finding the largest eigenvector of a symmetric matrix with the additional constraint that it adheres to our bilinear model. As with most non-convex optimization algorithms, the performance of both of these algorithms is highly dependent on having a good starting point. We show how such a starting point can be constructed from the channel measurements. Our performance guarantees are non-asymptotic, and provide a sufficient condition on the number of samples observed per channel in order to guarantee channel estimates of a certain accuracy. Our analysis uses a model with a "generic" subspace that is drawn at random, and we show the performance bounds hold with high probability. Mathematically, the key estimates are derived by quantifying how well the eigenvectors of certain random matrices approximate the eigenvectors of their mean. We also present a series of numerical results demonstrating that the empirical performance is consistent with the presented theory.

math.NA↗

arXiv2017

Spectral Methods for Passive Imaging: Non-asymptotic Performance and Robustness

We study the problem of passive imaging through convolutive channels. A scene is illuminated with an unknown, unstructured source, and the measured response is the convolution of this source with multiple channel responses, each of which is time-limited. Spectral methods based on the commutativity of convolution, first proposed and analyzed in the 1990s, provide an elegant mathematical framework for attacking this problem. However, these now classical methods are very sensitive to noise, especially when working from relatively small sample sizes. In this paper, we show that a linear subspace model on the coefficients of the impulse responses of the channels can make this problem well-posed. We derive non-asymptotic error bounds for the generic subspace model by analyzing the spectral gap of the cross-correlation matrix of the channels relative to the perturbation introduced by noise. Numerical results show that this modified spectral method offers significant improvements over the classical method and outperforms other competing methods for multichannel blind deconvolution.

cs.IT↗

arXiv2017

Unified Theory for Recovery of Sparse Signals in a General Transform Domain

Compressed sensing provided a data-acquisition paradigm for sparse signals. Remarkably, it has been shown that practical algorithms provide robust recovery from noisy linear measurements acquired at a near optimal sampling rate. In many real-world applications, a signal of interest is typically sparse not in the canonical basis but in a certain transform domain, such as wavelets or the finite difference. The theory of compressed sensing was extended to the analysis sparsity model but known extensions are limited to specific choices of sensing matrix and sparsifying transform. In this paper, we propose a unified theory for robust recovery of sparse signals in a general transform domain by convex programming. In particular, our results apply to general acquisition and sparsity models and show how the number of measurements for recovery depends on properties of measurement and sparsifying transforms. Moreover, we also provide extensions of our results to the scenarios where the atoms in the transform has varying incoherence parameters and the unknown signal exhibits a structured sparsity pattern. In particular, for the partial Fourier recovery of sparse signals over a circulant transform, our main results suggest a uniformly random sampling. Numerical results demonstrate that the variable density random sampling by our main results provides superior recovery performance over known sampling strategies.

cs.IT↗

arXiv2017

Generalized notions of sparsity and restricted isometry property. Part I: A unified framework

The restricted isometry property (RIP) is an integral tool in the analysis of various inverse problems with sparsity models. Motivated by the applications of compressed sensing and dimensionality reduction of low-rank tensors, we propose generalized notions of sparsity and provide a unified framework for the corresponding RIP, in particular when combined with isotropic group actions. Our results extend an approach by Rudelson and Vershynin to a much broader context including commutative and noncommutative function spaces. Moreover, our Banach space notion of sparsity applies to affine group actions. The generalized approach in particular applies to high order tensor products.

stat.ML↗

arXiv2017

Generalized notions of sparsity and restricted isometry property. Part II: Applications

The restricted isometry property (RIP) is a universal tool for data recovery. We explore the implication of the RIP in the framework of generalized sparsity and group measurements introduced in the Part I paper. It turns out that for a given measurement instrument the number of measurements for RIP can be improved by optimizing over families of Banach spaces. Second, we investigate the preservation of difference of two sparse vectors, which is not trivial in generalized models. Third, we extend the RIP of partial Fourier measurements at optimal scaling of number of measurements with random sign to far more general group structured measurements. Lastly, we also obtain RIP in infinite dimension in the context of Fourier measurement concepts with sparsity naturally replaced by smoothness assumptions.

stat.ML↗

arXiv2016

Compressive Sampling using Annihilating Filter-based Low-Rank Interpolation

While the recent theory of compressed sensing provides an opportunity to overcome the Nyquist limit in recovering sparse signals, a solution approach usually takes a form of inverse problem of the unknown signal, which is crucially dependent on specific signal representation. In this paper, we propose a drastically different two-step Fourier compressive sampling framework in continuous domain that can be implemented as a measurement domain interpolation, after which a signal reconstruction can be done using classical analytic reconstruction methods. The main idea is originated from the fundamental duality between the sparsity in the primary space and the low-rankness of a structured matrix in the spectral domain, which shows that a low-rank interpolator in the spectral domain can enjoy all the benefit of sparse recovery with performance guarantees. Most notably, the proposed low-rank interpolation approach can be regarded as a generalization of recent spectral compressed sensing to recover large class of finite rate of innovations (FRI) signals at near optimal sampling rate. Moreover, for the case of cardinal representation, we can show that the proposed low-rank interpolation will benefit from inherent regularization and the optimal incoherence parameter. Using the powerful dual certificates and golfing scheme, we show that the new framework still achieves the near-optimal sampling rate for general class of FRI signal recovery, and the sampling rate can be further reduced for the class of cardinal splines. Numerical results using various type of FRI signals confirmed that the proposed low-rank interpolation approach has significant better phase transition than the conventional CS approaches.

cs.IT↗

arXiv2016

Near Optimal Compressed Sensing of a Class of Sparse Low-Rank Matrices via Sparse Power Factorization

Compressed sensing of simultaneously sparse and low-rank matrices enables recovery of sparse signals from a few linear measurements of their bilinear form. One important question is how many measurements are needed for a stable reconstruction in the presence of measurement noise. Unlike conventional compressed sensing for sparse vectors, where convex relaxation via the $\ell_1$-norm achieves near optimal performance, for compressed sensing of sparse low-rank matrices, it has been shown recently Oymak et al. that convex programmings using the nuclear norm and the mixed norm are highly suboptimal even in the noise-free scenario. We propose an alternating minimization algorithm called sparse power factorization (SPF) for compressed sensing of sparse rank-one matrices. For a class of signals whose sparse representation coefficients are fast-decaying, SPF achieves stable recovery of the rank-1 matrix formed by their outer product and requires number of measurements within a logarithmic factor of the information-theoretic fundamental limit. For the recovery of general sparse low-rank matrices, we propose subspace-concatenated SPF (SCSPF), which has analogous near optimal performance guarantees to SPF in the rank-1 case. Numerical results show that SPF and SCSPF empirically outperform convex programmings using the best known combinations of mixed norm and nuclear norm.

cs.IT↗

arXiv2015

Identifiability and Stability in Blind Deconvolution under Minimal Assumptions

Blind deconvolution (BD) arises in many applications. Without assumptions on the signal and the filter, BD does not admit a unique solution. In practice, subspace or sparsity assumptions have shown the ability to reduce the search space and yield the unique solution. However, existing theoretical analysis on uniqueness in BD is rather limited. In an earlier paper, we provided the first algebraic sample complexities for BD that hold for almost all bases or frames. We showed that for BD of a pair of vectors in $\mathbb{C}^n$, with subspace constraints of dimensions $m_1$ and $m_2$, respectively, a sample complexity of $n\geq m_1m_2$ is sufficient. This result is suboptimal, since the number of degrees of freedom is merely $m_1+m_2-1$. We provided analogus results, with similar suboptimality, for BD with sparsity or mixed subspace and sparsity constraints. In this paper, taking advantage of the recent progress on the information-theoretic limits of unique low-rank matrix recovery, we finally bridge this gap, and derive an optimal sample complexity result for BD with generic bases or frames. We show that for BD of an arbitrary pair (resp. all pairs) of vectors in $\mathbb{C}^n$, with sparsity constraints of sparsity levels $s_1$ and $s_2$, a sample complexity of $n > s_1+s_2$ (resp. $n > 2(s_1+s_2)$) is sufficient. We also present analogous results for BD with subspace constraints or mixed constraints, with the subspace dimension replacing the sparsity level. Last but not least, in all the above scenarios, if the bases or frames follow a probabilistic distribution specified in the paper, the recovery is not only unique, but also stable against small perturbations in the measurements, under the same sample complexities.

cs.IT↗

arXiv2015

Optimal Sample Complexity for Blind Gain and Phase Calibration

Blind gain and phase calibration (BGPC) is a structured bilinear inverse problem, which arises in many applications, including inverse rendering in computational relighting (albedo estimation with unknown lighting), blind phase and gain calibration in sensor array processing, and multichannel blind deconvolution. The fundamental question of the uniqueness of the solutions to such problems has been addressed only recently. In a previous paper, we proposed studying the identifiability in bilinear inverse problems up to transformation groups. In particular, we studied several special cases of blind gain and phase calibration, including the cases of subspace and joint sparsity models on the signals, and gave sufficient and necessary conditions for identifiability up to certain transformation groups. However, there were gaps between the sample complexities in the sufficient conditions and the necessary conditions. In this paper, under a mild assumption that the signals and models are generic, we bridge the gaps by deriving tight sufficient conditions with optimal sample complexities.

cs.IT↗

arXiv2015

RIP-like Properties in Subsampled Blind Deconvolution

We derive near optimal performance guarantees for subsampled blind deconvolution. Blind deconvolution is an ill-posed bilinear inverse problem and additional subsampling makes the problem even more challenging. Sparsity and spectral flatness priors on unknown signals are introduced to overcome these difficulties. While being crucial for deriving desired near optimal performance guarantees, unlike the sparsity prior with a nice union-of-subspaces structure, the spectral flatness prior corresponds to a nonconvex cone structure, which is not preserved by elementary set operations. This prohibits the operator arising in subsampled blind deconvolution from satisfying the standard restricted isometry property (RIP) at near optimal sample complexity, which motivated us to study other RIP-like properties. Combined with the performance guarantees derived using these RIP-like properties in a companion paper, we show that subsampled blind deconvolution is provably solved at near optimal sample complexity by a practical algorithm.

cs.IT↗

arXiv2015

Blind Recovery of Sparse Signals from Subsampled Convolution

Subsampled blind deconvolution is the recovery of two unknown signals from samples of their convolution. To overcome the ill-posedness of this problem, solutions based on priors tailored to specific application have been developed in practical applications. In particular, sparsity models have provided promising priors. However, in spite of empirical success of these methods in many applications, existing analyses are rather limited in two main ways: by disparity between the theoretical assumptions on the signal and/or measurement model versus practical setups; or by failure to provide a performance guarantee for parameter values within the optimal regime defined by the information theoretic limits. In particular, it has been shown that a naive sparsity model is not a strong enough prior for identifiability in the blind deconvolution problem. Instead, in addition to sparsity, we adopt a conic constraint, which enforces spectral flatness of the signals. Under this prior, we provide an iterative algorithm that achieves guaranteed performance in blind deconvolution at near optimal sample complexity. Numerical results show the empirical performance of the iterative algorithm agrees with the performance guarantee.

cs.IT↗

arXiv2015

Identifiability in Blind Deconvolution with Subspace or Sparsity Constraints

Blind deconvolution (BD), the resolution of a signal and a filter given their convolution, arises in many applications. Without further constraints, BD is ill-posed. In practice, subspace or sparsity constraints have been imposed to reduce the search space, and have shown some empirical success. However, existing theoretical analysis on uniqueness in BD is rather limited. As an effort to address the still mysterious question, we derive sufficient conditions under which two vectors can be uniquely identified from their circular convolution, subject to subspace or sparsity constraints. These sufficient conditions provide the first algebraic sample complexities for BD. We first derive a sufficient condition that applies to almost all bases or frames. For blind deconvolution of vectors in $\mathbb{C}^n$, with two subspace constraints of dimensions $m_1$ and $m_2$, the required sample complexity is $n\geq m_1m_2$. Then we impose a sub-band structure on one basis, and derive a sufficient condition that involves a relaxed sample complexity $n\geq m_1+m_2-1$, which we show to be optimal. We present the extensions of these results to BD with sparsity constraints or mixed constraints, with the sparsity level replacing the subspace dimension. The cost for the unknown support in this case is an extra factor of 2 in the sample complexity.

cs.IT↗

arXiv2015

A Unified Framework for Identifiability Analysis in Bilinear Inverse Problems with Applications to Subspace and Sparsity Models

Bilinear inverse problems (BIPs), the resolution of two vectors given their image under a bilinear mapping, arise in many applications. Without further constraints, BIPs are usually ill-posed. In practice, properties of natural signals are exploited to solve BIPs. For example, subspace constraints or sparsity constraints are imposed to reduce the search space. These approaches have shown some success in practice. However, there are few results on uniqueness in BIPs. For most BIPs, the fundamental question of under what condition the problem admits a unique solution, is yet to be answered. For example, blind gain and phase calibration (BGPC) is a structured bilinear inverse problem, which arises in many applications, including inverse rendering in computational relighting (albedo estimation with unknown lighting), blind phase and gain calibration in sensor array processing, and multichannel blind deconvolution (MBD). It is interesting to study the uniqueness of such problems. In this paper, we define identifiability of a BIP up to a group of transformations. We derive necessary and sufficient conditions for such identifiability, i.e., the conditions under which the solutions can be uniquely determined up to the transformation group. Applying these results to BGPC, we derive sufficient conditions for unique recovery under several scenarios, including subspace, joint sparsity, and sparsity models. For BGPC with joint sparsity or sparsity constraints, we develop a procedure to compute the relevant transformation groups. We also give necessary conditions in the form of tight lower bounds on sample complexities, and demonstrate the tightness of these bounds by numerical experiments. The results for BGPC not only demonstrate the application of the proposed general framework for identifiability analysis, but are also of interest in their own right.

cs.IT↗

arXiv2012

Oblique Pursuits for Compressed Sensing

Compressed sensing is a new data acquisition paradigm enabling universal, simple, and reduced-cost acquisition, by exploiting a sparse signal model. Most notably, recovery of the signal by computationally efficient algorithms is guaranteed for certain randomized acquisition systems. However, there is a discrepancy between the theoretical guarantees and practical applications. In applications, including Fourier imaging in various modalities, the measurements are acquired by inner products with vectors selected randomly (sampled) from a frame. Currently available guarantees are derived using a so-called restricted isometry property (RIP), which has only been shown to hold under ideal assumptions. For example, the sampling from the frame needs to be independent and identically distributed with the uniform distribution, and the frame must be tight. In practice though, one or more of the ideal assumptions is typically violated and none of the existing guarantees applies. Motivated by this discrepancy, we propose two related changes in the existing framework: (i) a generalized RIP called the restricted biorthogonality property (RBOP); and (ii) correspondingly modified versions of existing greedy pursuit algorithms, which we call oblique pursuits. Oblique pursuits are guaranteed using the RBOP without requiring ideal assumptions; hence, the guarantees apply to practical acquisition schemes. Numerical results show that oblique pursuits also perform competitively with, or sometimes better than their conventional counterparts.

cs.IT↗

arXiv2011

Subspace Methods for Joint Sparse Recovery

We propose robust and efficient algorithms for the joint sparse recovery problem in compressed sensing, which simultaneously recover the supports of jointly sparse signals from their multiple measurement vectors obtained through a common sensing matrix. In a favorable situation, the unknown matrix, which consists of the jointly sparse signals, has linearly independent nonzero rows. In this case, the MUSIC (MUltiple SIgnal Classification) algorithm, originally proposed by Schmidt for the direction of arrival problem in sensor array processing and later proposed and analyzed for joint sparse recovery by Feng and Bresler, provides a guarantee with the minimum number of measurements. We focus instead on the unfavorable but practically significant case of rank-defect or ill-conditioning. This situation arises with limited number of measurement vectors, or with highly correlated signal components. In this case MUSIC fails, and in practice none of the existing methods can consistently approach the fundamental limit. We propose subspace-augmented MUSIC (SA-MUSIC), which improves on MUSIC so that the support is reliably recovered under such unfavorable conditions. Combined with subspace-based greedy algorithms also proposed and analyzed in this paper, SA-MUSIC provides a computationally efficient algorithm with a performance guarantee. The performance guarantees are given in terms of a version of restricted isometry property. In particular, we also present a non-asymptotic perturbation analysis of the signal subspace estimation that has been missing in the previous study of MUSIC.

cs.IT↗

arXiv2009

ADMiRA: Atomic Decomposition for Minimum Rank Approximation

We address the inverse problem that arises in compressed sensing of a low-rank matrix. Our approach is to pose the inverse problem as an approximation problem with a specified target rank of the solution. A simple search over the target rank then provides the minimum rank solution satisfying a prescribed data approximation bound. We propose an atomic decomposition that provides an analogy between parsimonious representations of a sparse vector and a low-rank matrix. Efficient greedy algorithms to solve the inverse problem for the vector case are extended to the matrix case through this atomic decomposition. In particular, we propose an efficient and guaranteed algorithm named ADMiRA that extends CoSaMP, its analogue for the vector case. The performance guarantee is given in terms of the rank-restricted isometry property and bounds both the number of iterations and the error in the approximate solution for the general case where the solution is approximately low-rank and the measurements are noisy. With a sparse measurement operator such as the one arising in the matrix completion problem, the computation in ADMiRA is linear in the number of measurements. The numerical experiments for the matrix completion problem show that, although the measurement operator in this case does not satisfy the rank-restricted isometry property, ADMiRA is a competitive algorithm for matrix completion.

math.NA↗

arXiv2009

Efficient and Guaranteed Rank Minimization by Atomic Decomposition

Recht, Fazel, and Parrilo provided an analogy between rank minimization and $\ell_0$-norm minimization. Subject to the rank-restricted isometry property, nuclear norm minimization is a guaranteed algorithm for rank minimization. The resulting semidefinite formulation is a convex problem but in practice the algorithms for it do not scale well to large instances. Instead, we explore missing terms in the analogy and propose a new algorithm which is computationally efficient and also has a performance guarantee. The algorithm is based on the atomic decomposition of the matrix variable and extends the idea in the CoSaMP algorithm for $\ell_0$-norm minimization. Combined with the recent fast low rank approximation of matrices based on randomization, the proposed algorithm can efficiently handle large scale rank minimization problems.

math.NA↗