arXiv subjects

Klaus Koepernik

Publications and source records attributed to Klaus Koepernik.

At least 37 records · Page 2Linked to original sources

arXiv2016

Magnetism, spin texture and in-gap states: Atomic specialization at the surface of oxygen-deficient SrTiO$_3$

Motivated by recent spin- and angular-resolved photoemission (SARPES) measurements performed on the two-dimensional electronic states confined near the (001) surface of SrTiO$_3$ in the presence of oxygen vacancies, we explore their spin structure by means of ab initio density functional theory (DFT) calculations of slabs. Relativistic nonmagnetic DFT calculations display Rashba-like spin winding with a splitting of a few meV and when surface magnetism on the Ti ions is in- cluded, bands become spin-split with an energy difference ~100 meV at the $Γ$ point, consistent with SARPES findings. While magnetism tends to suppress the effects of the relativistic Rashba interaction, signatures of it are still clearly visible in terms of complex spin textures. Furthermore, we observe an atomic specialization phenomenon, namely, two types of electronic contributions: one is from Ti atoms neighboring the oxygen vacancies that acquire rather large magnetic moments and mostly create in-gap states; another comes from the partly polarized t$_{2g}$ itinerant electrons of Ti atoms lying further away from the oxygen vacancy, which form the two-dimensional electron system and are responsible for the Rashba spin winding and the spin splitting at the Fermi surface.

cond-mat.str-el↗

arXiv2016

Electronic Structure of the Dark Surface of the Weak Topological Insulator Bi14Rh3I9

The compound Bi14Rh3I9 consists of ionic stacks of intermetallic [(Bi4Rh)3I]2+ and insulating [Bi2I8]2- layers and has been identified to be a weak topological insulator. Scanning tunneling microscopy revealed the robust edge states at all step edges of the cationic layer as a topological fingerprint. However, these edge states are found 0.25 eV below the Fermi level which is an obstacle for transport experiments. Here, we address this obstacle by comparing results of density functional slab calculations with scanning tunneling spectroscopy and angle-resolved photoemission spectroscopy. We show that the n-type doping of the intermetallic layer is intrinsically caused by the polar surface and is well screened towards the bulk. In contrast, the anionic "spacer" layer shows a gap at the Fermi level, both, on the surface and in the bulk, i.e. it is not surface-doped due to iodine desorption. The well screened surface dipole implies that a buried edge state, probably already below a single spacer layer, is located at the Fermi level. Consequently, a multilayer step covered by a spacer layer could provide access to the transport properties of the topological edge states. In addition, we find a lateral electronic modulation of the topologically non-trivial surface layer which is traced back to the coupling with the underlying zigzag chain structure of the spacer layer.

cond-mat.mtrl-sci↗

arXiv2015

Correlation between topological band character and chemical bonding in a $\mathbf{Bi_{14}Rh_{3}I_{9}}$-based family of insulators

Recently the presence of topologically protected edge-states in Bi$_{14}$Rh$_3$I$_9$ was confirmed by scanning tunnelling microscopy consolidating this compound as a weak 3D topological insulator (TI). Here, we present a density-functional-theory-based study on a family of TIs derived from the Bi$_{14}$Rh$_3$I$_9$ parent structure via substitution of Ru, Pd, Os, Ir and Pt for Rh. Comparative analysis of the band-structures throughout the entire series is done by means of a unified minimalistic tight-binding model that evinces strong similarity between the quantum-spin-Hall (QSH) layer in Bi$_{14}$Rh$_3$I$_9$ and graphene in terms of $p_z$-molecular orbitals. Topologically non-trivial energy gaps are found for the Ir-, Rh-, Pt- and Pd-based systems, whereas the Os- and Ru-systems remain trivial. Furthermore, the energy position of the metal $d$-band centre is identified as the parameter which governs the evolution of the topological character of the band structure through the whole family of TIs. The $d$-band position is shown to correlate with the chemical bonding within the QSH layers, thus revealing how the chemical nature of the constituents affects the topological band character.

cond-mat.mtrl-sci↗

arXiv2015

Metastable cubic and tetragonal phases of transition metals predicted by density-functional theory

By means of density-functional calculations, we systematically investigated 24 transition metals for possible metastable phases in body-centered tetragonal structure (bct), including face-centered cubic (fcc) and body-centered cubic (bcc) geometries. A total of 36 structures not coinciding with equilibrium phases were found to minimize the total energy for the bct degrees of freedom. Among these, the fcc structures of Sc, Ti, Co, Y, Zr, Tc, Ru, Hf, Re, and Os, and bct Zr with $c/a=0.82$ were found to be metastable according to their computed phonon spectra. Eight of these predicted phases are not known from the respective pressure-temperature phase diagrams. Possible ways to stabilize the predicted metastable phases are illustrated.

cond-mat.mtrl-sci↗

arXiv2015

Orbital control of effective dimensionality: from spin-orbital fractionalization to confinement in the anisotropic ladder system CaCu2O3

Fractionalization of an electronic quasiparticle into spin, charge and orbital parts is a fundamental and characteristic property of interacting electrons in one dimension. However, real materials are never strictly one-dimensional and the fractionalization phenomena are hard to observe. Here we studied the spin and orbital excitations of the anisotropic ladder material CaCu2O3, whose electronic structure is not one-dimensional. Combining high-resolution resonant inelastic x-ray scattering experiments with theoretical model calculations we show that: (i) spin-orbital fractionalization occurs in CaCu2O3 along the leg direction x through the xz orbital channel as in a 1D system; and (ii) no fractionalization is observed for the xy orbital, which extends in both leg and rung direction, contrary to a 1D system. We conclude that the directional character of the orbital hopping can select different degrees of dimensionality. Using additional model calculations, we show that spin-orbital separation is generally far more robust than the spin-charge separation. This is not only due to the already mentioned selection realized by the orbital hopping, but also due to the fact that spinons are faster than the orbitons.

cond-mat.str-el↗

arXiv2015

Prediction of first-order martensitic transitions in strained epitaxial films

Coherent epitaxial growth allows to produce crystalline films with strained structures which are unstable in the bulk. Thereby, the relationship between the lattice parameters of the overlayer in the interface plane, $(a,b)$, and its minimum-energy out-of-plane lattice parameter, $c_{\text{min}}(a,b)$, need not be continuous. This general statement is proven by examples of total energy calculations. As a consequence, $c_{\text{min}}$, which is determined by the choice of the substrate, and $c_{\text{min}}$-dependent intrinsic properties of the overlayer cannot always be tuned in a continuous way as one may aim to do by means of strained epitaxy. Employing the model of the epitaxial Bain path we predict that such discontinuities occur in films of the elements V, Nb, Ru, La, Os, and Ir. The abrupt change of $c_{\text{min}}$ can be exploited to switch properties specific to the overlayer material. This is demonstrated for the example of the superconducting critical temperature of a V film which we predict to jump by 20% at a discontinuity of $c_{\text{min}}$

cond-mat.mtrl-sci↗

arXiv2015

Sub-nm wide electron channels protected by topology

Helical locking of spin and momentum and prohibited backscattering are the key properties of topologically protected states. They are expected to enable novel types of information processing such as spintronics by providing pure spin currents, or fault tolerant quantum computation by using the Majorana fermions at interfaces of topological states with superconductors. So far, the required helical conduction channels used to realize Majorana fermions are generated through application of an axial magnetic field to conventional semiconductor nanowires. Avoiding the magnetic field enhances the possibilities for circuit design significantly. Here, we show that sub-nanometer wide electron channels with natural helicity are present at surface step-edges of the recently discovered topological insulator Bi14Rh3I9. Scanning tunneling spectroscopy reveals the electron channels to be continuous in both energy and space within a large band gap of 200 meV, thereby, evidencing its non-trivial topology. The absence of these channels in the closely related, but topologically trivial insulator Bi13Pt3I7 corroborates the channels' topological nature. The backscatter-free electron channels are a direct consequence of Bi14Rh3I9's structure, a stack of 2D topologically insulating, graphene-like planes separated by trivial insulators. We demonstrate that the surface of Bi14Rh3I9 can be engraved using an atomic force microscope, allowing networks of protected channels to be patterned with nm precision.

cond-mat.mes-hall↗

arXiv2015

Emergence of quasi-one-dimensional physics in Mo$_3$S$_7$(dmit)$_3$, a nearly-isotropic three-dimensional molecular crystal

We report density functional theory calculations for Mo$_3$S$_7$(dmit)$_3$. We derive an ab initio tight-binding model from overlaps of Wannier orbitals; finding a layered model with interlayer hopping terms $\sim3/4$ the size of the in-plane terms. The in-plane Hamiltonian interpolates the kagomé and honeycomb lattices. It supports states localized to dodecahedral rings within the plane, which populate one-dimensional (1D) bands and lead to a quasi-1D spin-one model on a layered honeycomb lattice once interactions are included. Two lines of Dirac cones also cross the Fermi energy.

cond-mat.str-el↗

arXiv2015

SmO thin films: a flexible route to correlated flat bands with nontrivial topology

Using density functional theory based calculations, we show that the correlated mixed-valent compound SmO is a 3D strongly topological semi-metal as a result of a 4$f$-5$d$ band inversion at the X point. The [001] surface Bloch spectral density reveals two weakly interacting Dirac cones that are quasi-degenerate at the M_bar-point and another single Dirac cone at the Gamma_bar-point. We also show that the topological non-triviality in SmO is very robust and prevails for a wide range of lattice parameters, making it an ideal candidate to investigate topological nontrivial correlated flat bands in thin-film form. Moreover, the electron filling is tunable by strain. In addition, we find conditions for which the inversion is of the 4f-6s type, making SmO to be a rather unique system. The similarities of the crystal symmetry and the lattice constant of SmO to the well studied ferromagnetic semiconductor EuO, makes SmO/EuO thin film interfaces an excellent contender towards realizing the quantum anomalous Hall effect in a strongly correlated electron system.

cond-mat.str-el↗

arXiv2013

Stacked topological insulator built from bismuth-based graphene sheet analogues

Commonly materials are classified as either electrical conductors or insulators. The theoretical discovery of topological insulators (TIs) in 2005 has fundamentally challenged this dichotomy. In a TI, spin-orbit interaction generates a non-trivial topology of the electronic band-structure dictating that its bulk is perfectly insulating, while its surface is fully conducting. The first TI candidate material put forward -graphene- is of limited practical use since its weak spin-orbit interactions produce a band-gap of ~0.01K. Recent reinvestigation of Bi2Se3 and Bi2Te3, however, have firmly categorized these materials as strong three-dimensional TI's. We have synthesized the first bulk material belonging to an entirely different, weak, topological class, built from stacks of two-dimensional TI's: Bi14Rh3I9. Its Bi-Rh sheets are graphene analogs, but with a honeycomb net composed of RhBi8-cubes rather than carbon atoms. The strong bismuth-related spin-orbit interaction renders each graphene-like layer a TI with a 2400K band-gap.

cond-mat.mtrl-sci↗

arXiv2012

Nuclear magnetic resonance at up to 10.1 Giga-Pascal pressure detects an electronic topological transition in aluminum metal

High-sensitivity $^{27}$Al nuclear magnetic resonance (NMR) measurements of aluminum metal under hydrostatic pressure of up to 10.1 GPa reveal an unexpected negative curvature in the pressure-dependence of the electronic density of states measured through shift and relaxation, which violates free electron behavior. A careful analysis of the Fermiology of aluminum shows that pressure induces an electronic topological transition (Lifshitz transition) that is responsible for the measured change in the density of states. The experiments also reveal a sudden increase in the NMR linewidth above 4.2 GPa from quadrupole interaction, which is not in agreement with the metal's cubic symmetry.

cond-mat.mtrl-sci↗

arXiv2012

Highly anisotropic magnetic states of Co dimers bound to graphene-vacancies

The adsorption behavior and the magnetic states of cobalt atoms and dimers on single vacancies in a graphene sheet are investigated by means of relativistic density functional calculations. It is found that local magnetic moments are formed in both cases, despite strong chemical binding. Of particular interest are kinetically stable isomers with two cobalt atoms attached to the same side of the graphene sheet. Magnetic bi-stability with an anisotropy barrier of about 50 meV is possible in this geometry. The feasibility of its preparation is discussed.

cond-mat.mtrl-sci↗

arXiv2012

Electronic and Thermoelectric Properties of RuIn_{3-x}A_{x} (A = Sn, Zn)

Recently, we reported [M. Wagner et al., J. Mater. Res. 26, 1886 (2011)] transport measurements on the semiconducting intermetallic system RuIn3 and its substitution derivatives RuIn_{3-x}A_{x} (A = Sn, Zn). Higher values of the thermoelectric figure of merit (zT = 0.45) compared to the parent compound were achieved by chemical substitution. Here, using density functional theory based calculations, we report on the microscopic picture behind the measured phenomenon. We show in detail that the electronic structure of the substitution variants of the intermetallic system RuIn_{3-x}A_{x} (A = Sn, Zn) changes in a rigid-band like fashion. This behavior makes possible the fine tuning of the substitution concentration to take advantage of the sharp peak-like features in the density of states of the semiconducting parent compound. Trends in the transport properties calculated using the semi-classical Boltzmann transport equations within the constant scattering time approximation are in good agreement with the former experimental results for RuIn_{3-x}Sn_{x}. Based on the calculated thermopower for the p-doped systems, we reinvestigated the Zn-substituted derivative and obtained ZnO-free RuIn_{3-x}Zn_{x}. The new experimental results are consistent with the calculated trend in thermopower and yield large zT value of 0.8.

cond-mat.mtrl-sci↗

arXiv2011

Orbital order and magnetism of FeNCN

Based on density functional calculations, we report on the orbital order and microscopic magnetic model of FeNCN, a prototype compound for orbital-only models. Despite having a similar energy scale, the spin and orbital degrees of freedom in FeNCN are only weakly coupled. The ground-state configuration features the doubly occupied d_{3z^2-r^2} (a1g) orbital and four singly-occupied d orbitals resulting in the spin S=2 on the Fe+2 atoms, whereas alternative (Eg') configurations are about 75 meV/f.u. higher in energy. Calculated exchange couplings and band gap are in good agreement with the available experimental data. Experimental effects arising from possible orbital excitations are discussed.

cond-mat.str-el↗

arXiv2011

Symmetry preserving lattice collapse in tetragonal SrFe_(2-x)Ru_xAs_2 (x = 0, 0.2) -- a combined experimental and theoretical study

In a joint experimental and theoretical study, we investigate the isostructural collapse from the ambient pressure tetragonal phase to a collapsed tetragonal phase for non-superconducting metallic SrFe2As2 and SrFe_1.8Ru_0.2As_2. The crystallographic details have been studied using X-ray powder diffraction up to 20 GPa pressure in a diamond anvil cell. The structural phase transition occurs at 10 GPa and 9 GPa for SrFe2As2 and SrFe_1.8Ru_0.2As_2, respectively. The changes in the unit cell dimensions are highly anisotropic with a continuous decrease of the c lattice parameter with pressure, while the a-axis length increases until the transition to a collapsed tetragonal phase and then continues to decrease. Across the phase transition, we observe a volume reduction of 5% and 4% for SrFe2As2 and SrFe_1.8Ru_0.2As_2, respectively. We are able to discern that Ru substitution on the Fe-site acts like `chemical pressure' to the system. Density-functional theory-based calculations of the electronic structure and electron localizability indicator are consistent with the experimental observations. Detailed analysis of the electronic structure in k-space and real space reveals As 4pz interlayer bond formation as the driving force of the c/a collapse with a change in the As-As bond length of about 0.35ang.

cond-mat.mtrl-sci↗

arXiv2011

The effect of chemical disorder on the magnetic anisotropy of strained Fe-Co films

Strained Fe-Co films have recently been demonstrated to exhibit a large magnetocrystalline anisotropy (MCA) and thus to be of potential interest as magnetic storage material. Here, we show by means of density-functional (DF) calculations, that chemical order can remarkably enhance the MCA. We also investigate the effect of relaxation perpendicular to the applied strain and evaluate the strain energy as a function of Co concentration and substrate lattice parameter. On this basis, favourable preparation routes for films with a large perpendicular anisotropy are suggested.

cond-mat.mtrl-sci↗

arXiv2010

CoIr-carbon complexes with magnetic anisotropies larger than 0.2 eV: a density-functional-theory prediction

We report a density-functional study of the heteronuclear CoIr dimer adsorbed on benzene or graphene. In either case CoIr prefers an upright position above the center of a carbon hexagon with the Co atom next to it. The Ir atom stays away from the carbon ring and thus preserves its free-atom-like properties. This results in a very large magnetic anisotropy of more than 0.2 eV per dimer. So high a value should suffice for long-term data storage at the temperature of liquid nitrogen.

cond-mat.mes-hall↗

arXiv2010

Existence, character and origin of surface-related bands in the high temperature iron pnictide superconductor BaFe_{2-x}Co_{x}As_{2}

Low energy electron diffraction (LEED) experiments, LEED simulations and finite slab density functional calculations are combined to study the cleavage surface of Co doped BaFe_{2-x}Co_{x}As_{2} (x = 0.1, 0.17). We demonstrate that the energy dependence of the LEED data can only be understood from a terminating 1/2 Ba layer accompanied by distortions of the underlying As-Fe_2-As block. As a result, surface related Fe 3d states are present in the electronic structure, which we identify in angle resolved photoemission experiments. The close proximity of the surface-related states to the bulk bands inevitably leads to broadening of the ARPES signals, which excludes the use of the BaFe_{2-x}Co_{x}As_{2} system for accurate determination of self-energies using ARPES.

cond-mat.supr-con↗