arXiv subjects

Klaus Wehrle

Publications and source records attributed to Klaus Wehrle.

At least 19 recordsLinked to original sources

arXiv2026

Quantum Technologies and Edge Devices in Electrical Grids: Opportunities, Challenges, and Future Directions

In modern power systems, edge devices serve as local hubs that collect data, perform on-site computing, sense electrical parameters, execute control actions, and communicate with neighboring edge devices as part of the larger grid. However, as the number of monitored nodes and control loops grows, traditional edge devices face serious limits. They can become overloaded by complex signal processing and decision tasks, causing delays and higher energy use. Standard sensors hit a noise floor that prevents them from detecting miniature changes, making it harder to spot early signs of faults or instability. Meanwhile, conventional communication links struggle with bandwidth limits, security risks, and rising encryption demands, which together slow down and weaken the transfer of critical grid information. Quantum technologies have the potential to overcome these challenges. Quantum computers can deliver exponential speed-ups for optimization and machine-learning tasks that ordinary processors cannot handle. Quantum sensors can sense signals with atomic precision, giving edge devices a more precise view of grid dynamics. Quantum communication techniques, including quantum key distribution, offer methods to achieve information-theoretic security and ensure that information arrives quickly and without tampering. We explore how quantum technologies can be integrated into edge devices, highlighting both opportunities and challenges.

eess.SY↗

arXiv2026

Supporting Artifact Evaluation with LLMs: A Study with Published Security Research Papers

Artifact Evaluation (AE) is essential for ensuring the transparency and reliability of research, closing the gap between exploratory work and real-world deployment is particularly important in cybersecurity, particularly in IoT and CPSs, where large-scale, heterogeneous, and privacy-sensitive data meet safety-critical actuation. Yet, manual reproducibility checks are time-consuming and do not scale with growing submission volumes. In this work, we demonstrate that Large Language Models (LLMs) can provide powerful support for AE tasks: (i) text-based reproducibility rating, (ii) autonomous sandboxed execution environment preparation, and (iii) assessment of methodological pitfalls. Our reproducibility-assessment toolkit yields an accuracy of over 72% and autonomously sets up execution environments for 28% of runnable cybersecurity artifacts. Our automated pitfall assessment detects seven prevalent pitfalls with high accuracy ($F_1$ > 92%). Hence, the toolkit significantly reduces reviewer effort and, when integrated into established AE processes, could incentivize authors to submit higher-quality and more reproducible artifacts. IoT, CPS, and cybersecurity conferences and workshops may integrate the toolkit into their peer-review processes to support reviewers' decisions on awarding artifact badges, improving the overall sustainability of the process.

cs.CR↗

arXiv2025

MAC Aggregation over Lossy Channels in DTLS 1.3

Aggregating Message Authentication Codes (MACs) promises to save valuable bandwidth in resource-constrained environments. The idea is simple: Instead of appending an authentication tag to each message in a communication stream, the integrity protection of multiple messages is aggregated into a single tag. Recent studies postulate, e.g., based on simulations, that these benefits also spread to wireless, and thus lossy, scenarios despite each lost packet typically resulting in the loss of integrity protection information for multiple messages. In this paper, we investigate these claims in a real deployment. Therefore, we first design a MAC aggregation extension for the Datagram Transport Layer Security (DTLS) 1.3 protocol. Afterward, we extensively evaluate the performance of MAC aggregation on a complete communication protocol stack on embedded hardware. We find that MAC aggregation can indeed increase goodput by up to 50% and save up to 17% of energy expenditure for the transmission of short messages, even in lossy channels.

cs.CR↗

arXiv2025

In-Situ Model Validation for Continuous Processes Using In-Network Computing

The advancing industrial digitalization enables evolved process control schemes that rely on accurate models learned through data-driven approaches. While they provide high control performance and are robust to smaller deviations, a larger change in process behavior can pose significant challenges, in the worst case even leading to a damaged process plant. Hence, it is important to frequently assess the fit between the model and the actual process behavior. As the number of controlled processes and associated data volumes increase, the need for lightweight and fast reacting assessment solutions also increases. In this paper, we propose CIVIC, an in-network computing-based solution for Continuous In-situ Validation of Industrial Control models. In short, CIVIC monitors relevant process variables and detects different process states through comparison with a priori knowledge about the desired process behavior. This detection can then be leveraged to, e.g., shut down the process or trigger a reconfiguration. We prototype CIVIC on an Intel Tofino-based switch and apply it to a lab-scale water treatment plant. Our results show that we can achieve a high detection accuracy, proving that such monitoring systems are feasible and sensible.

cs.NI↗

arXiv2025

CAIBA: Multicast Source Authentication for CAN Through Reactive Bit Flipping

Controller Area Networks (CANs) are the backbone for reliable intra-vehicular communication. Recent cyberattacks have, however, exposed the weaknesses of CAN, which was designed without any security considerations in the 1980s. Current efforts to retrofit security via intrusion detection or message authentication codes are insufficient to fully secure CAN as they cannot adequately protect against masquerading attacks, where a compromised communication device, a so-called electronic control units, imitates another device. To remedy this situation, multicast source authentication is required to reliably identify the senders of messages. In this paper, we present CAIBA, a novel multicast source authentication scheme specifically designed for communication buses like CAN. CAIBA relies on an authenticator overwriting authentication tags on-the-fly, such that a receiver only reads a valid tag if not only the integrity of a message but also its source can be verified. To integrate CAIBA into CAN, we devise a special message authentication scheme and a reactive bit overwriting mechanism. We achieve interoperability with legacy CAN devices, while protecting receivers implementing the AUTOSAR SecOC standard against masquerading attacks without communication overhead or verification delays.

cs.CR↗

arXiv2024

Unconsidered Installations: Discovering IoT Deployments in the IPv6 Internet

Internet-wide studies provide extremely valuable insight into how operators manage their Internet of Things (IoT) deployments in reality and often reveal grievances, e.g., significant security issues. However, while IoT devices often use IPv6, past studies resorted to comprehensively scan the IPv4 address space. To fully understand how the IoT and all its services and devices is operated, including IPv6-reachable deployments is inevitable-although scanning the entire IPv6 address space is infeasible. In this paper, we close this gap and examine how to best discover IPv6-reachable IoT deployments. To this end, we propose a methodology that allows combining various IPv6 scan direction approaches to understand the findability and prevalence of IPv6-reachable IoT deployments. Using three sources of active IPv6 addresses and eleven address generators, we discovered 6658 IoT deployments. We derive that the available address sources are a good starting point for finding IoT deployments. Additionally, we show that using two address generators is sufficient to cover most found deployments and save time as well as resources. Assessing the security of the deployments, we surprisingly find similar issues as in the IPv4 Internet, although IPv6 deployments might be newer and generally more up-to-date: Only 39% of deployments have access control in place and only 6.2% make use of TLS inviting attackers, e.g., to eavesdrop sensitive data.

cs.NI↗

arXiv2024

Deployment Challenges of Industrial Intrusion Detection Systems

With the escalating threats posed by cyberattacks on Industrial Control Systems (ICSs), the development of customized Industrial Intrusion Detection Systems (IIDSs) received significant attention in research. While existing literature proposes effective IIDS solutions evaluated in controlled environments, their deployment in real-world industrial settings poses several challenges. This paper highlights two critical yet often overlooked aspects that significantly impact their practical deployment, i.e., the need for sufficient amounts of data to train the IIDS models and the challenges associated with finding suitable hyperparameters, especially for IIDSs training only on genuine ICS data. Through empirical experiments conducted on multiple state-of-the-art IIDSs and diverse datasets, we establish the criticality of these issues in deploying IIDSs. Our findings show the necessity of extensive malicious training data for supervised IIDSs, which can be impractical considering the complexity of recording and labeling attacks in actual industrial environments. Furthermore, while other IIDSs circumvent the previous issue by requiring only benign training data, these can suffer from the difficulty of setting appropriate hyperparameters, which likewise can diminish their performance. By shedding light on these challenges, we aim to enhance the understanding of the limitations and considerations necessary for deploying effective cybersecurity solutions in ICSs, which might be one reason why IIDSs see few deployments.

cs.CR↗

arXiv2023

When and How to Aggregate Message Authentication Codes on Lossy Channels?

Aggregation of message authentication codes (MACs) is a proven and efficient method to preserve valuable bandwidth in resource-constrained environments: Instead of appending a long authentication tag to each message, the integrity protection of multiple messages is aggregated into a single tag. However, while such aggregation saves bandwidth, a single lost message typically means that authentication information for multiple messages cannot be verified anymore. With the significant increase of bandwidth-constrained lossy communication, as applications shift towards wireless channels, it thus becomes paramount to study the impact of packet loss on the diverse MAC aggregation schemes proposed over the past 15 years to assess when and how to aggregate message authentication. Therefore, we empirically study all relevant MAC aggregation schemes in the context of lossy channels, investigating achievable goodput improvements, the resulting verification delays, processing overhead, and resilience to denial-of-service attacks. Our analysis shows the importance of carefully choosing and configuring MAC aggregation, as selecting and correctly parameterizing the right scheme can, e.g., improve goodput by 39% to 444%, depending on the scenario. However, since no aggregation scheme performs best in all scenarios, we provide guidelines for network operators to select optimal schemes and parameterizations suiting specific network settings.

cs.CR↗

arXiv2023

Madtls: Fine-grained Middlebox-aware End-to-end Security for Industrial Communication

Industrial control systems increasingly rely on middlebox functionality such as intrusion detection or in-network processing. However, traditional end-to-end security protocols interfere with the necessary access to in-flight data. While recent work on middlebox-aware end-to-end security protocols for the traditional Internet promises to address the dilemma between end-to-end security guarantees and middleboxes, the current state-of-the-art lacks critical features for industrial communication. Most importantly, industrial settings require fine-grained access control for middleboxes to truly operate in a least-privilege mode. Likewise, advanced applications even require that middleboxes can inject specific messages (e.g., emergency shutdowns). Meanwhile, industrial scenarios often expose tight latency and bandwidth constraints not found in the traditional Internet. As the current state-of-the-art misses critical features, we propose Middlebox-aware DTLS (Madtls), a middlebox-aware end-to-end security protocol specifically tailored to the needs of industrial networks. Madtls provides bit-level read and write access control of middleboxes to communicated data with minimal bandwidth and processing overhead, even on constrained hardware.

cs.CR↗

arXiv2023

SoK: Evaluations in Industrial Intrusion Detection Research

Industrial systems are increasingly threatened by cyberattacks with potentially disastrous consequences. To counter such attacks, industrial intrusion detection systems strive to timely uncover even the most sophisticated breaches. Due to its criticality for society, this fast-growing field attracts researchers from diverse backgrounds, resulting in 130 new detection approaches in 2021 alone. This huge momentum facilitates the exploration of diverse promising paths but likewise risks fragmenting the research landscape and burying promising progress. Consequently, it needs sound and comprehensible evaluations to mitigate this risk and catalyze efforts into sustainable scientific progress with real-world applicability. In this paper, we therefore systematically analyze the evaluation methodologies of this field to understand the current state of industrial intrusion detection research. Our analysis of 609 publications shows that the rapid growth of this research field has positive and negative consequences. While we observe an increased use of public datasets, publications still only evaluate 1.3 datasets on average, and frequently used benchmarking metrics are ambiguous. At the same time, the adoption of newly developed benchmarking metrics sees little advancement. Finally, our systematic analysis enables us to provide actionable recommendations for all actors involved and thus bring the entire research field forward.

cs.CR↗

arXiv2023

Reputation Systems for Supply Chains: The Challenge of Achieving Privacy Preservation

Consumers frequently interact with reputation systems to rate products, services, and deliveries. While past research extensively studied different conceptual approaches to realize such systems securely and privacy-preservingly, these concepts are not yet in use in business-to-business environments. In this paper, (1) we thus outline which specific challenges privacy-cautious stakeholders in volatile supply chain networks introduce, (2) give an overview of the diverse landscape of privacy-preserving reputation systems and their properties, and (3) based on well-established concepts from supply chain information systems and cryptography, we further propose an initial concept that accounts for the aforementioned challenges by utilizing fully homomorphic encryption. For future work, we identify the need of evaluating whether novel systems address the supply chain-specific privacy and confidentiality needs.

cs.CR↗

arXiv2023

Does It Spin? On the Adoption and Use of QUIC's Spin Bit

Encrypted QUIC traffic complicates network management as traditional transport layer semantics can no longer be used for RTT or packet loss measurements. Addressing this challenge, QUIC includes an optional, carefully designed mechanism: the spin bit. While its capabilities have already been studied in test settings, its real-world usefulness and adoption are unknown. In this paper, we thus investigate the spin bit's deployment and utility on the web. Analyzing our long-term measurements of more than 200M domains, we find that the spin bit is enabled on ~10% of those with QUIC support and for ~50% / 60% of the underlying IPv4 / IPv6 hosts. The support is mainly driven by medium-sized cloud providers while most hyperscalers do not implement it. Assessing the utility of spin bit RTT measurements, the theoretical issue of reordering does not significantly manifest in our study and the spin bit provides accurate estimates for around 30.5% of connections using the mechanism, but drastically overestimates the RTT for another 51.7%. Overall, we conclude that the spin bit, even though an optional feature, indeed sees use in the wild and is able to provide reasonable RTT estimates for a solid share of QUIC connections, but requires solutions for making its measurements more robust.

cs.NI↗

arXiv2023

An Interdisciplinary Survey on Information Flows in Supply Chains

Supply chains form the backbone of modern economies and therefore require reliable information flows. In practice, however, supply chains face severe technical challenges, especially regarding security and privacy. In this work, we consolidate studies from supply chain management, information systems, and computer science from 2010-2021 in an interdisciplinary meta-survey to make this topic holistically accessible to interdisciplinary research. In particular, we identify a significant potential for computer scientists to remedy technical challenges and improve the robustness of information flows. We subsequently present a concise information flow-focused taxonomy for supply chains before discussing future research directions to provide possible entry points.

cs.CR↗

arXiv2023

ECN with QUIC: Challenges in the Wild

TCP and QUIC can both leverage ECN to avoid congestion loss and its retransmission overhead. However, both protocols require support of their remote endpoints and it took two decades since the initial standardization of ECN for TCP to reach 80% ECN support and more in the wild. In contrast, the QUIC standard mandates ECN support, but there are notable ambiguities that make it unclear if and how ECN can actually be used with QUIC on the Internet. Hence, in this paper, we analyze ECN support with QUIC in the wild: We conduct repeated measurements on more than 180M domains to identify HTTP/3 websites and analyze the underlying QUIC connections w.r.t. ECN support. We only find 20% of QUIC hosts, providing 6% of HTTP/3 websites, to mirror client ECN codepoints. Yet, mirroring ECN is only half of what is required for ECN with QUIC, as QUIC validates mirrored ECN codepoints to detect network impairments: We observe that less than 2% of QUIC hosts, providing less than 0.3% of HTTP/3 websites, pass this validation. We identify possible root causes in content providers not supporting ECN via QUIC and network impairments hindering ECN. We thus also characterize ECN with QUIC distributedly to traverse other paths and discuss our results w.r.t. QUIC and ECN innovations beyond QUIC.

cs.NI↗

arXiv2023

Poster: Accountable Processing of Reported Street Problems

Municipalities increasingly depend on citizens to file digital reports about issues such as potholes or illegal trash dumps to improve their response time. However, the responsible authorities may be incentivized to ignore certain reports, e.g., when addressing them inflicts high costs. In this work, we explore the applicability of blockchain technology to hold authorities accountable regarding filed reports. Our initial assessment indicates that our approach can be extended to benefit citizens and authorities in the future.

cs.CR↗

arXiv2023

Secrets Revealed in Container Images: An Internet-wide Study on Occurrence and Impact

Containerization allows bundling applications and their dependencies into a single image. The containerization framework Docker eases the use of this concept and enables sharing images publicly, gaining high momentum. However, it can lead to users creating and sharing images that include private keys or API secrets-either by mistake or out of negligence. This leakage impairs the creator's security and that of everyone using the image. Yet, the extent of this practice and how to counteract it remains unclear. In this paper, we analyze 337,171 images from Docker Hub and 8,076 other private registries unveiling that 8.5% of images indeed include secrets. Specifically, we find 52,107 private keys and 3,158 leaked API secrets, both opening a large attack surface, i.e., putting authentication and confidentiality of privacy-sensitive data at stake and even allow active attacks. We further document that those leaked keys are used in the wild: While we discovered 1,060 certificates relying on compromised keys being issued by public certificate authorities, based on further active Internet measurements, we find 275,269 TLS and SSH hosts using leaked private keys for authentication. To counteract this issue, we discuss how our methodology can be used to prevent secret leakage and reuse.

cs.CR↗

arXiv2023

Evolving the Digital Industrial Infrastructure for Production: Steps Taken and the Road Ahead

The Internet of Production (IoP) leverages concepts such as digital shadows, data lakes, and a World Wide Lab (WWL) to advance today's production. Consequently, it requires a technical infrastructure that can support the agile deployment of these concepts and corresponding high-level applications, which, e.g., demand the processing of massive data in motion and at rest. As such, key research aspects are the support for low-latency control loops, concepts on scalable data stream processing, deployable information security, and semantically rich and efficient long-term storage. In particular, such an infrastructure cannot continue to be limited to machines and sensors, but additionally needs to encompass networked environments: production cells, edge computing, and location-independent cloud infrastructures. Finally, in light of the envisioned WWL, i.e., the interconnection of production sites, the technical infrastructure must be advanced to support secure and privacy-preserving industrial collaboration. To evolve today's production sites and lay the infrastructural foundation for the IoP, we identify five broad streams of research: (1) adapting data and stream processing to heterogeneous data from distributed sources, (2) ensuring data interoperability between systems and production sites, (3) exchanging and sharing data with different stakeholders, (4) network security approaches addressing the risks of increasing interconnectivity, and (5) security architectures to enable secure and privacy-preserving industrial collaboration. With our research, we evolve the underlying infrastructure from isolated, sparsely networked production sites toward an architecture that supports high-level applications and sophisticated digital shadows while facilitating the transition toward a WWL.

cs.NI↗

arXiv2022

Missed Opportunities: Measuring the Untapped TLS Support in the Industrial Internet of Things

The ongoing trend to move industrial appliances from previously isolated networks to the Internet requires fundamental changes in security to uphold secure and safe operation. Consequently, to ensure end-to-end secure communication and authentication, (i) traditional industrial protocols, e.g., Modbus, are retrofitted with TLS support, and (ii) modern protocols, e.g., MQTT, are directly designed to use TLS. To understand whether these changes indeed lead to secure Industrial Internet of Things deployments, i.e., using TLS-based protocols, which are configured according to security best practices, we perform an Internet-wide security assessment of ten industrial protocols covering the complete IPv4 address space. Our results show that both, retrofitted existing protocols and newly developed secure alternatives, are barely noticeable in the wild. While we find that new protocols have a higher TLS adoption rate than traditional protocols (7.2% vs. 0.4%), the overall adoption of TLS is comparably low (6.5% of hosts). Thus, most industrial deployments (934,736 hosts) are insecurely connected to the Internet. Furthermore, we identify that 42% of hosts with TLS support (26,665 hosts) show security deficits, e.g., missing access control. Finally, we show that support in configuring systems securely, e.g., via configuration templates, is promising to strengthen security.

cs.CR↗