arXiv subjects

Klaus-J. Boller

Publications and source records attributed to Klaus-J. Boller.

At least 19 recordsLinked to original sources

arXiv2024

Chip-integrated extended-cavity mode-locked laser in the visible

Mode-locked lasers are of interest for applications such as biological imaging, non-linear frequency conversion, and single-photon generation. In the infrared, chip-integrated mode-locked lasers have been demonstrated through integration of laser diodes with low-loss photonic circuits. However additional challenges, such as a higher propagation loss and smaller alignment tolerances have prevented the realization of such lasers in the visible range. Here, we demonstrate the first chip-integrated mode-locked diode laser in the visible using an integrated photonic circuit for cavity extension. Based on a gallium arsenide gain chip and a low-loss silicon nitride feedback circuit, the laser is passively mode-locked using a saturable absorber implemented by focused ion beam milling. At a center wavelength of 642 nm, the laser shows an average output power of 3.4 mW, with a spectral bandwidth of 1.5 nm at a repetition rate of 7.84 GHz.

physics.optics↗

arXiv2024

High-power and narrow-linewidth laser on thin-film lithium niobate enabled by photonic wire bonding

Thin-film lithium niobate (TFLN) has emerged as a promising platform for the realization of high performance chip-scale optical systems, spanning a range of applications from optical communications to microwave photonics. Such applications rely on the integration of multiple components onto a single platform. However, while many of these components have already been demonstrated on the TFLN platform, to date, a major bottleneck of the platform is the existence of a tunable, high-power, and narrow-linewidth on-chip laser. Here, we address this problem using photonic wire bonding to integrate optical amplifiers with a thin-film lithium niobate feedback circuit, and demonstrate an extended cavity diode laser yielding high on-chip power of 78 mW, side mode suppression larger than 60 dB and wide wavelength tunability over 43 nm. The laser frequency stability over short timescales shows an ultra-narrow intrinsic linewidth of 550 Hz. Long-term recordings indicate a high passive stability of the photonic wire bonded laser with 58 hours of mode-hop-free operation, with a trend in the frequency drift of only 4.4 MHz/h. This work verifies photonic wire bonding as a viable integration solution for high performance on-chip lasers, opening the path to system level upscaling and Watt-level output powers.

physics.optics↗

arXiv2024

Widely-tunable and narrow-linewidth hybrid-integrated diode laser at 637 nm

We present hybrid-integrated extended cavity diode lasers tunable around 637 nm, with a gain-wide spectral coverage of 8 nm. This tuning range allows addressing the zero-phonon line of nitrogen vacancy centers and includes the wavelength of HeNe lasers (633 nm). The lasers provide wide mode-hop free tuning up to 97 GHz and a narrow intrinsic linewidth down to 10 kHz. The maximum output power is 2.5 mW in a single-mode fiber, corresponding to an on-chip power of 4.0 mW. Full integration and packaging in a standard housing with fiber pigtails provide high intrinsic stability and will enable integration into complex optical systems.

physics.optics↗

arXiv2023

Long-term absolute frequency stabilization of a hybrid-integrated InP-Si3N4 diode laser

Hybrid integrated diode lasers based on combining semiconductor optical amplifiers with low-loss Si3N4-based feedback circuits enable great laser performance for advanced photonic circuits. In particular, using high-Q Si3N4 ring resonators for frequency-selective feedback provides wide spectral coverage, mode-hop free tuning, and high frequency stability on short timescales, showing as ultra-narrow intrinsic linewidths. However, many applications also require long-term stability, which can be provided by locking the laser frequency to a suitable reference. We present the stabilization of a hybrid-integrated laser, which is widely tunable around the central wavelength of 1550 nm, to a fiber-based optical frequency discriminator (OFD) and to an acetylene absorption line. By locking the laser to the OFD, the laser's fractional frequency stability is improved down to 2.1$\cdot$10$^{-12}$ over an averaging time of 0.5 ms. For absolute stability over longer times of several days, we successfully lock the laser frequency to an acetylene absorption line. This limits the frequency deviations of the laser to a range of less than 12 MHz over 5 days.

physics.optics↗

arXiv2022

Ultra-Efficient On-Chip Supercontinuum Generation from Sign-Alternating-Dispersion Waveguides

Fully integrated supercontinuum sources on-chip are critical to enabling applications such as portable and mechanically-stable medical imaging devices, chemical sensing and LiDAR. However, the low-efficiency of current supercontinuum generation schemes prevent full on-chip integration. In this letter, we present a scheme where the input energy requirements for integrated supercontinuum generation is drastically lowered by orders of magnitude, for bandwidth generation of the order of 500 to 1000 nm. Through sign-alternating the dispersion in a CMOS compatible silicon nitride waveguide, we achieve an efficiency enhancement by factors reaching 3800. We show that the pulse energy requirement for large bandwidth supercontinuum generation at high spectral energy (e.g., 1/e level) is lowered from nanojoules to 6 picojoules. The lowered pulse energy requirements enables that chip-integrated laser sources, such as mode-locked heterogeneously or hybrid integrated diode lasers, can be used as a pump source, enabling fully integrated on-chip high-bandwidth supercontinuum sources.

physics.optics↗

arXiv2022

Fully on-chip photonic turnkey quantum source for entangled qubit/qudit state generation

Integrated photonics has recently become a leading platform for the realization and processing of optical entangled quantum states in compact, robust and scalable chip formats with applications in long-distance quantum-secured communication, quantum-accelerated information processing and non-classical metrology. However, the quantum light sources developed so far have relied on external bulky excitation lasers making them impractical, not reproducible prototype devices, hindering scalability and the transfer out of the lab into real-world applications. Here we demonstrate a fully integrated quantum light source, which overcomes these challenges through the combined integration of a laser cavity, a highly efficient tunable noise suppression filter ($> 55$ dB) exploiting the Vernier effect and a nonlinear microring for entangled photon pair generation through spontaneous four-wave mixing. The hybrid quantum source employs an electrically-pumped InP gain section and a Si$_3$N$_4$ low-loss microring filter system, and demonstrates high performance parameters, i.e., a pair emission over four resonant modes in the telecom band (bandwidth $\sim 1$ THz), and a remarkable pair detection rate of $\sim 620$ Hz at a high coincidence-to-accidental ratio of $\sim 80$. The source directly creates high-dimensional frequency-bin entangled quantum states (qubits/qudits), verified by quantum interference measurements with visibilities up to $96\%$ (violating Bell-inequality) and by density matrix reconstruction through state tomography showing fidelities of up to $99\%$. Our approach, leveraging a hybrid photonic platform, enables commercial-viable, low-cost, compact, light-weight, and field-deployable entangled quantum sources, quintessential for practical, out-of-lab applications, e.g., in quantum processors and quantum satellite communications systems.

physics.optics↗

arXiv2021

Toward integrated synchronously pumped optical parametric oscillators in silicon nitride

We present a tunable, hybrid waveguide-fiber optical parametric oscillator (OPO) synchronously pumped by an ultra-fast fiber laser exploiting four-wave mixing (FWM) generated in silicon nitride waveguides. Parametric oscillation results in a 35 dB enhancement of the idler spectral power density in comparison to spontaneous FWM, with the ability of wide wavelength tuning over 86 nm in the O-band. Measurements of the oscillation threshold and the efficiency of the feedback loop reveal how an integration of the OPO on a single silicon nitride chip can be accomplished at standard repetition rates of pump lasers in the order of 100 MHz.

physics.optics↗

arXiv2021

A hybrid-integrated diode laser in the visible spectral range

Generating visible light with wide tunability and high coherence based on photonic integrated circuits is of high interest for applications in biophotonics, precision metrology and quantum technology. Here we present the first demonstration of a hybrid-integrated diode laser in the visible spectral range. Using an AlGaInP optical amplifier coupled to a low-loss Si3N4 feedback circuit based on microring resonators, we obtain a spectral coverage of 10.8 nm around 684.4 nm wavelength with up to 4.8 mW output power. The measured intrinsic linewidth is 2.3$\pm$0.2 kHz.

physics.optics↗

arXiv2020

High-purity microwave generation using a dual-frequency hybrid integrated semiconductor-dielectric waveguide laser

We present an integrated semiconductor-dielectric hybrid dual-frequency laser operating in the 1.5 $μ$m wavelength range for microwave and terahertz (THz) generation. Generating a microwave beat frequency near 11 GHz, we observe a record-narrow intrinsic linewidth as low as about 2 kHz. This is realized by hybrid integration of a single diode amplifier based on indium phosphide (InP) with a long, low-loss silicon nitride (Si$_3$N$_4$) feedback circuit to extend the cavity photon lifetime, resulting in a cavity optical roundtrip length of about 30 cm on a chip. Simultaneous lasing at two frequencies is enabled by introducing an external control parameter for balancing the feedback from two tunable, frequency-selective Vernier mirrors on the Si$_3$N$_4$ chip. Each frequency can be tuned with a wavelength coverage of about 80 nm, potentially allowing for the generation of a broad range of frequencies in the microwave range up to the THz range.

physics.app-ph↗

arXiv2020

Ultra-narrow linewidth hybrid integrated semiconductor laser

We demonstrate a hybrid integrated and widely tunable diode laser with an intrinsic linewidth as narrow as 40 Hz, achieved with a single roundtrip through a low-loss feedback circuit that extends the cavity length to 0.5 meter on a chip. Employing solely dielectrics for single-roundtrip, single-mode resolved feedback filtering enables linewidth narrowing with increasing laser power, without limitations through nonlinear loss. We achieve single-frequency oscillation with up to 23 mW fiber coupled output power, 70-nm wide spectral coverage in the 1.55 $μ$m wavelength range with 3 mW output, and obtain more than 60 dB side mode suppression. Such properties and options for further linewidth narrowing render the approach of high interest for direct integration in photonic circuits serving microwave photonics, coherent communications, sensing and metrology with highest resolution.

physics.optics↗

arXiv2019

Ring resonator enhanced mode-hop-free wavelength tuning of an integrated extended-cavity laser

Extending the cavity length of diode lasers with feedback from Bragg structures and ring resonators is highly effective for obtaining ultra-narrow laser linewidths. However, cavity length extension also decreases the free-spectral range of the cavity. This reduces the wavelength range of continuous laser tuning that can be achieved with a given phase shift of an intracavity phase tuning element. We present a method that increases the range of continuous tuning to that of a short equivalent laser cavity, while maintaining the ultra-narrow linewidth of a long cavity. Using a single-frequency hybrid integrated InP-Si3N4 diode laser with 120 nm coverage around 1540 nm, with a maximum output of 24 mW and lowest intrinsic linewidth of 2.2 kHz, we demonstrate a six-fold increased continuous and mode-hop-free tuning range of 0.22 nm (28 GHz) as compared to the free-spectral range of the laser cavity.

physics.optics↗

arXiv2019

Hybrid integrated semiconductor lasers with silicon nitride feedback circuits

Hybrid integrated semiconductor laser sources offering extremely narrow spectral linewidth as well as compatibility for embedding into integrated photonic circuits are of high importance for a wide range of applications. We present an overview on our recently developed hybrid-integrated diode lasers with feedback from low-loss silicon nitride (Si3N4 in SiO2) circuits, to provide sub-100-Hz-level intrinsic linewidths, up to 120 nm spectral coverage around 1.55 um wavelength, and an output power above 100 mW. We show dual-wavelength operation, dual-gain operation, laser frequency comb generation, and present work towards realizing a visible-light hybrid integrated diode laser.

physics.optics↗

arXiv2019

Supercontinuum generation in media with sign-alternated dispersion

When an ultrafast optical pulse with high intensity is propagating through transparent material a supercontinuum can be coherently generated by self-phase modulation, which is essential to many photonic applications in fibers and integrated waveguides. However, the presence of dispersion causes stagnation of spectral broadening past a certain propagation length, requiring an increased input peak power for further broadening. We present a concept to drive supercontinuum generation with significantly lower input power by counteracting spectral stagnation via alternating the sign of group velocity dispersion along the propagation. We demonstrate the effect experimentally in dispersion alternating fiber in excellent agreement with modeling, revealing almost an order of magnitude reduced peak power compared to uniform dispersion. Calculations reveal a similar power reduction also with integrated optical waveguides, simultaneously with a significant increase of flat bandwidth, which is important for on-chip broadband photonics.

physics.optics↗

arXiv2019

Surface acoustic waves for acousto-optic modulation in buried silicon nitride waveguides

We theoretically investigate the use of Rayleigh surface acoustic waves (SAWs) for refractive index modulation in optical waveguides consisting of amorphous dielectrics. Considering low-loss Si$_3$N$_4$ waveguides with a standard core cross section of 4.4$\times$0.03 $μ$m$^2$ size, buried 8 $μ$m deep in a SiO$_2$ cladding we compare surface acoustic wave generation in various different geometries via a piezo-active, lead zirconate titanate film placed on top of the surface and driven via an interdigitized transducer (IDT). Using numerical solutions of the acoustic and optical wave equations, we determine the strain distribution of the SAW under resonant excitation. From the overlap of the acoustic strain field with the optical mode field we calculate and maximize the attainable amplitude of index modulation in the waveguide. For the example of a near-infrared wavelength of 840 nm, a maximum shift in relative effective refractive index of 0.7x10$^{-3}$ was obtained for TE polarized light, using an IDT period of 30 - 35 $μ$m, a film thickness of 2.5 - 3.5 $μ$m, and an IDT voltage of 10 V. For these parameters, the resonant frequency is in the range 70 - 85 MHz. The maximum shift increases to 1.2x10$^{-3}$, with a corresponding resonant frequency of 87 MHz, when the height of the cladding above the core is reduced to 3 $μ$m. The relative index change is about 300-times higher than in previous work based on non-resonant proximity piezo-actuation, and the modulation frequency is about 200-times higher. Exploiting the maximum relative index change of 1.2$\times$10$^{-3}$ in a low-loss balanced Mach-Zehnder modulator should allow full-contrast modulation in devices as short as 120 $μ$m (half-wave voltage length product = 0.24 Vcm).

physics.optics↗

arXiv2017

Photo-induced second-order nonlinearity in stoichiometric silicon nitride waveguides

We report the observation of second-harmonic generation in stoichiometric silicon nitride waveguides grown via low-pressure chemical vapour deposition. Quasi-rectangular waveguides with a large cross section were used, with a height of 1 μm and various different widths, from 0.6 to 1.2 μm, and with various lengths from 22 to 74 mm. Using a mode-locked laser delivering 6-ps pulses at 1064 nm wavelength with a repetition rate of 20 MHz, 15% of the incoming power was coupled through the waveguide, making maximum average powers of up to 15 mW available in the waveguide. Second-harmonic output was observed with a delay of minutes to several hours after the initial turn-on of pump radiation, showing a fast growth rate between 10$^{-4}$ to 10$^{-2}$ s$^{-1}$, with the shortest delay and highest growth rate at the highest input power. After this first, initial build-up, the second-harmonic became generated instantly with each new turn-on of the pump laser power. Phase matching was found to be present independent of the used waveguide width, although the latter changes the fundamental and second-harmonic phase velocities. We address the presence of a second-order nonlinearity and phase matching, involving an initial, power-dependent build-up, to the coherent photogalvanic effect. The effect, via the third-order nonlinearity and multiphoton absorption leads to a spatially patterned charge separation, which generates a spatially periodic, semi-permanent, DC-field-induced second-order susceptibility with a period that is appropriate for quasi-phase matching. The maximum measured second-harmonic conversion efficiency amounts to 0.4% in a waveguide with 0.9 x 1 μm$^2$ cross section and 36 mm length, corresponding to 53 μW at 532 nm with 13 mW of IR input coupled into the waveguide. The according $χ^{(2)}$ amounts to 3.7 pm/V, as retrieved from the measured conversion efficiency.

physics.optics↗

arXiv2015

High confinement, high yield Si3N4 waveguides for nonlinear optical application

In this paper we present a novel fabrication technique for silicon nitride (Si3N4) waveguides with a thickness of up to 900 nm, which are suitable for nonlinear optical applications. The fabrication method is based on etching trenches in thermally oxidized silicon and filling the trenches with Si3N4. Using this technique no stress-induced cracks in the Si3N4 layer were observed resulting in a high yield of devices on the wafer. The propagation losses of the obtained waveguides were measured to be as low as 0.4 dB/cm at a wavelength of around 1550 nm.

physics.optics↗

arXiv2013

Integrated CARS Source based on Seeded Four-wave Mixing in Silicon Nitride

We present a theoretical investigation of an integrated nonlinear light source for coherent anti-Stokes Raman scattering (CARS) based on silicon nitride waveguides. Wavelength tunable and temporally synchronized signal and idler pulses are obtained by using seeded four-wave mixing. We find that the calculated input pump power needed for nonlinear wavelength generation is more than one order of magnitude lower than in previously reported approaches based on optical fibers. The tuning range of the wavelength conversion was calculated to be 1418 nm to 1518 nm (idler) and 788 nm to 857 nm (signal), which corresponds to a coverage of vibrational transitions from 2350 cm$^{-1}$ to 2810 cm$^{-1}$. A maximum conversion efficiency of 19.1% at a peak pump power of 300 W was obtained.

physics.optics↗

arXiv2012

A gain-coefficient switched Alexandrite laser

We report on a gain-coefficient switched Alexandrite laser. An electro-optic modulator is used to switch between high and low gain states by making use of the polarization dependent gain of Alexandrite. In gain-coefficient switched mode, the laser produces 85 ns pulses with a pulse energy of 240 mJ at a repetition rate of 5 Hz.

physics.optics↗