arXiv subjects

Klemens Hammerer

Publications and source records attributed to Klemens Hammerer.

At least 73 records · Page 4Linked to original sources

arXiv2017

Quantum back action evading measurement of motion in a negative mass reference frame

Quantum mechanics dictates that a continuous measurement of the position of an object imposes a random back action perturbation on its momentum. This randomness translates with time into position uncertainty, thus leading to the well known uncertainty on the measurement of motion. Here we demonstrate that the quantum back action on a macroscopic mechanical oscillator measured in the reference frame of an atomic spin oscillator can be evaded. The collective quantum measurement on this novel hybrid system of two distant and disparate oscillators is performed with light. The mechanical oscillator is a drum mode of a millimeter size dielectric membrane and the spin oscillator is an atomic ensemble in a magnetic field. The spin oriented along the field corresponds to an energetically inverted spin population and realizes an effective negative mass oscillator, while the opposite orientation corresponds to a positive mass oscillator. The quantum back action is evaded in the negative mass setting and is enhanced in the positive mass case. The hybrid quantum system presented here paves the road to entanglement generation and distant quantum communication between mechanical and spin systems and to sensing of force, motion and gravity beyond the standard quantum limit.

quant-ph↗

arXiv2016

Open-system many-body dynamics through interferometric measurements and feedback

Light-matter interfaces enable the generation of entangled states of light and matter which can be exploited to steer the quantum state of matter through measurement of light and feedback. Here we consider continuous-time, interferometric homodyne measurements of light on an array of light-matter interfaces followed by local feedback acting on each material system individually. While the systems are physically non-interacting, the feedback master equation we derive describes driven-dissipative, interacting many-body quantum dynamics, and comprises pairwise Hamiltonian interactions and collective jump operators. We characterize the general class of driven-dissipative many body systems which can be engineered in this way, and derive necessary conditions on models supporting non-trivial quantum dynamics beyond what can be generated by local operations and classical communication. We provide specific examples of models which allow for the creation of stationary many-particle entanglement, and the emulation of dissipative Ising models. Since the interaction between the systems is mediated via feedback only, there is no intrinsic limit on the range or geometry of the interaction, making the scheme quite versatile.

quant-ph↗

arXiv2016

Nonlinear Quantum Optics in Optomechanical Nanoscale Waveguides

We explore the possibility of achieving a significant nonlinear phase shift among photons propagating in nanoscale waveguides exploiting interactions among photons that are mediated by vibrational modes and induced through Stimulated Brillouin Scattering (SBS). We introduce a configuration that allows slowing down the photons by several orders of magnitude via SBS involving sound waves and two pump fields. We extract the conditions for maintaining vanishing amplitude gain or loss for slowly propagating photons while keeping the influence of thermal phonons to the minimum. The nonlinear phase among two counter-propagating photons can be used to realize a deterministic phase gate.

quant-ph↗

arXiv2016

Synchronization of Active Atomic Clocks via Quantum and Classical Channels

Superradiant lasers based on atomic ensembles exhibiting ultra-narrow optical transitions can emit light of unprecedented spectral purity and may serve as active atomic clocks. We consider two frequency-detuned active atomic clocks, which are coupled in a cascaded setup, i.e. as master & slave lasers, and study the synchronization of the slave to the master clock. In a setup where both atomic ensembles are coupled to a common cavity mode such synchronization phenomena have been predicted by Xu et al. [Phys. Rev. Lett. 113, 154101 (2014)] and experimentally observed by Weiner et al. [arXiv:1503.06464 (2015)]. Here we demonstrate that synchronization still occurs in cascaded setups but exhibits distinctly different phase diagrams. We study the characteristics of synchronization in comparison to the case of coupling through a common cavity. We also consider synchronization through a classical channel where light of the master laser is measured phase sensitively and the slave laser is injection locked by feedback and compare to the results achievable by coupling through quantum channels.

quant-ph↗

arXiv2016

Optomechanical Multi-Mode Hamiltonian for Nanophotonic Waveguides

We develop a systematic method for deriving a quantum optical multi-mode Hamiltonian for the interaction of photons and phonons in nanophotonic dielectric materials by applying perturbation theory to the electromagnetic Hamiltonian. The Hamiltonian covers radiation pressure and electrostrictive interactions on equal footing. As a paradigmatic example, we apply our method to a cylindrical nanoscale waveguide, and derive a Hamiltonian description of Brillouin quantum optomechanics. We show analytically that in nanoscale waveguides radiation pressure dominates over electrostriction, in agreement with recent experiments. The calculated photon-phonon coupling parameters are used to infer gain parameters of Stokes Brillouin scattering in good agreement with experimental observations.

quant-ph↗

arXiv2016

Measurement-Induced Long-Distance Entanglement of Superconducting Qubits using Optomechanical Transducers

Although superconducting systems provide a promising platform for quantum computing, their networking poses a challenge as they cannot be interfaced to light---the medium used to send quantum signals through channels at room temperature. We show that mechanical oscillators can mediated such coupling and light can be used to measure the joint state of two distant qubits. The measurement provides information on the total spin of the two qubits such that entangled qubit states can be postselected. Entanglement generation is possible without ground-state cooling of the mechanical oscillators for systems with optomechanical cooperativity moderately larger than unity; in addition, our setup tolerates a substantial transmission loss. The approach is scalable to generation of multipartite entanglement and represents a crucial step towards quantum networks with superconducting circuits.

quant-ph↗

arXiv2016

Quantum Feedback Cooling of a Mechanical Oscillator Using Variational Measurements:Tweaking Heisenberg's Microscope

We revisit the problem of preparing a mechanical oscillator in the vicinity of its quantum-mechanical ground state by means of feedback cooling based on continuous optical detection of the oscillator position. In the parameter regime relevant to ground state cooling, the optical back-action and imprecision noise set the bottleneck of achievable cooling and must be carefully balanced. This can be achieved by adapting the phase of the local oscillator in the homodyne detection realizing a so-called variational measurement. The trade-off between accurate position measurement and minimal disturbance can be understood in terms of Heisenberg's microscope and becomes particularly relevant when the measurement and feedback processes happen to be fast within the quantum coherence time of the system to be cooled. This corresponds to the regime of large quantum cooperativity $C_{\text{q}}\gtrsim1$, which was achieved in recent experiments on feedback cooling. Our method provides a simple path to further pushing the limits of current state-of-the-art experiments in quantum optomechanics.

quant-ph↗

arXiv2016

Generalized analysis of quantum noise and dynamic back-action in signal-recycled Michelson-type laser interferometers

We analyze the radiation pressure induced interaction of mirror motion and light fields in Michelson-type interferometers used for the detection of gravitational waves and for fundamental research in table-top quantum optomechanical experiments, focusing on the asymmetric regime with a (slightly) unbalanced beamsplitter and a (small) offset from the dark port. This regime, as it was shown recently, provides new interesting features, in particular a stable optical spring and optical cooling on cavity resonance. We show that generally the nature of optomechanical coupling in Michelson-type interferometers does not fit into the standard dispersive/dissipative dichotomy. In particular, a symmetric Michelson interferometer with signal-recycling but without power-recycling cavity is characterized by a purely dissipative optomechanical coupling; only in the presence of asymmetry, additional dispersive coupling arises. In gravitational waves detectors possessing signal- and power-recycling cavities, yet another, "coherent" type of optomechanical coupling takes place. We develop here a generalized framework for the analysis of asymmetric Michelson-type interferometers which also covers the possibility of the injection of carrier light into both ports of the interferometer. Using this framework, we analyze in depth the "anomalous" features of the Michelson-Sagnac interferometer which where discussed and observed experimentally in previous works [1-3].

quant-ph↗

arXiv2016

Quantum Algorithmic Readout in Multi-Ion Clocks

Optical clocks based on ensembles of trapped ions offer the perspective of record frequency uncertainty with good short-term stability. Most suitable atomic species lack closed transitions for fast detection such that the clock signal has to be read out indirectly through transferring the quantum state of clock ions to co-trapped logic ions by means of quantum logic operations. For ensembles of clock ions existing methods for quantum logic readout require a linear overhead in either time or the number of logic ions. Here we report a quantum algorithmic readout whose overhead scales logarithmically with the number of clock ions in both of these respects. We show that the readout algorithm can be implemented with a single application of a multi-species quantum gate, which we describe in detail for a crystal of Aluminum and Calcium ions.

physics.atom-ph↗

arXiv2015

Violation of Bell's Inequality in Electromechanics

Opto- and electromechanical systems offer an effective platform to test quantum theory and its predictions at macroscopic scales. To date, all experiments presuppose the validity of quantum mechanics, but could in principle be described by a hypothetical local statistical theory. Here we suggest a Bell test using the electromechanical Einstein-Podolski-Rosen entangled state recently generated by Palomaki et al., which would rule out any local and realistic explanation of the measured data without assuming the validity of quantum mechanics at macroscopic scales. It additionally provides a device-independent way to verify electromechanical entanglement. The parameter regime required for our scheme has been demonstrated or is within reach of current experiments.

quant-ph↗

arXiv2015

Optimal state estimation for cavity optomechanical systems

We demonstrate optimal state estimation for a cavity optomechanical system through Kalman filtering. By taking into account nontrivial experimental noise sources, such as colored laser noise and spurious mechanical modes, we implement a realistic state-space model. This allows us to obtain the conditional system state, i.e., conditioned on previous measurements, with minimal least-square estimation error. We apply this method for estimating the mechanical state, as well as optomechanical correlations both in the weak and strong coupling regime. The application of the Kalman filter is an important next step for achieving real-time optimal (classical and quantum) control of cavity optomechanical systems.

quant-ph↗

arXiv2015

Adiabatic Elimination of Gaussian Subsystems from Quantum Dynamics under Continuous Measurement

An ever broader range of physical platforms provides the possibility to study and engineer quantum dynamics under continuous measurements. In many experimental arrangements the system of interest is monitored by means of an ancillary device, whose sole purpose is to transduce the signal from the system to the measurement apparatus. Here, we present a method of adiabatic elimination when the transducer consists of an arbitrary number of bosonic modes with Gaussian dynamics while the measured object can be any quantum system. Crucially, our approach can cope with the highly relevant case of finite temperature of the transducer, which is not easily achieved with other methods. We show that this approach provides a significant improvement in the readout of superconducting qubits in circuit QED already for a few thermal excitations, and admits to adiabatically eliminate optomechanical transducers.

quant-ph↗

arXiv2015

Entanglement-enhanced time-continuous quantum control in optomechanics

The cavity-optomechanical radiation pressure interaction provides the means to create entanglement between a mechanical oscillator and an electromagnetic field interacting with it. Here we show how we can utilize this entanglement within the framework of time-continuous quantum control, in order to engineer the quantum state of the mechanical system. Specifically, we analyze how to prepare a low-entropy mechanical state by (measurement-based) feedback cooling operated in the blue detuned regime, the creation of bipartite mechanical entanglement via time-continuous entanglement swapping, and preparation of a squeezed mechanical state by time-continuous teleportation. The protocols presented here are feasible in optomechanical systems exhibiting a cooperativity larger than 1.

quant-ph↗

arXiv2015

Sub-Poissonian Phonon Lasing in Three-Mode Optomechanics

We propose to use the resonant enhancement of the parametric instability in an optomechanical system of two optical modes coupled to a mechanical oscillator to prepare mechanical states with sub-Poissonian phonon statistics. Strong single photon coupling is not required. The requirements regarding sideband resolution, circulating cavity power and environmental temperature are in reach with state of the art parameters of optomechanical crystals. Phonon antibunching can be verfied in a Hanburry-Brown-Twiss measurement on the output field of the optomechanical cavity.

quant-ph↗

arXiv2015

Observation of generalized optomechanical coupling and cooling on cavity resonance

Optomechanical coupling between a light field and the motion of a cavity mirror via radiation pressure plays an important role for the exploration of macroscopic quantum physics and for the detection of gravitational waves (GWs). It has been used to cool mechanical oscillators into their quantum ground states and has been considered to boost the sensitivity of GW detectors, e.g. via the optical spring effect. Here, we present the experimental characterization of generalized, that is, dispersive and dissipative optomechanical coupling, with a macroscopic (1.5mm)^2-sized silicon nitride (SiN) membrane in a cavity-enhanced Michelson-type interferometer. We report for the first time strong optomechanical cooling based on dissipative coupling, even on cavity resonance, in excellent agreement with theory. Our result will allow for new experimental regimes in macroscopic quantum physics and GW detection.

quant-ph↗

arXiv2015

Hybrid Mechanical Systems

We discuss hybrid systems in which a mechanical oscillator is coupled to another (microscopic) quantum system, such as trapped atoms or ions, solid-state spin qubits, or superconducting devices. We summarize and compare different coupling schemes and describe first experimental implementations. Hybrid mechanical systems enable new approaches to quantum control of mechanical objects, precision sensing, and quantum information processing.

quant-ph↗

arXiv2014

Optomechanical sensing of spontaneous wave-function collapse

Quantum experiments with nanomechanical oscillators are regarded as a testbed for hypothetical modifications of the Schrödinger equation, which predict a breakdown of the superposition principle and induce classical behavior at the macro-scale. It is generally believed that the sensitivity to these unconventional effects grows with the mass of the mechanical quantum system. Here we show that the opposite is the case for optomechanical systems in the presence of generic noise sources, such as thermal and measurement noise. We determine conditions for distinguishing these decoherence processes from possible collapse-induced decoherence in continuous optomechanical force measurements.

quant-ph↗

arXiv2014

Trajectories without quantum uncertainties

A common knowledge suggests that trajectories of particles in quantum mechanics always have quantum uncertainties. These quantum uncertainties set by the Heisenberg uncertainty principle limit precision of measurements of fields and forces, and ultimately give rise to the standard quantum limit in metrology. With the rapid developments of sensitivity of measurements these limits have been approached in various types of measurements including measurements of fields and acceleration. Here we show that a quantum trajectory of one system measured relatively to the other "reference system" with an effective negative mass can be quantum uncertainty--free. The method crucially relies on the generation of an Einstein-Podolsky-Rosen entangled state of two objects, one of which has an effective negative mass. From a practical perspective these ideas open the way towards force and acceleration measurements at new levels of sensitivity far below the standard quantum limit.

quant-ph↗