Searcharxiv⌕ Search

arXiv subjects

Koji Mori

Publications and source records attributed to Koji Mori.

At least 37 records · Page 2Linked to original sources

XRISM forecast for the Coma cluster: stormy, with a steep power spectrum

The XRISM Resolve microcalorimeter array measured the velocities of hot intracluster gas at two positions in the Coma galaxy cluster: 3'x3' squares at the center and at 6' (170 kpc) to the south. We find the line-of-sight velocity dispersions in those regions to be sigma_z=208+-12 km/s and 202+-24 km/s, respectively. The central value corresponds to a 3D Mach number of M=0.24+-0.015 and the ratio of the kinetic pressure of small-scale motions to thermal pressure in the intracluster plasma of only 3.1+-0.4%, at the lower end of predictions from cosmological simulations for merging clusters like Coma, and similar to that observed in the cool core of the relaxed cluster A2029. Meanwhile, the gas in both regions exhibits high line-of-sight velocity differences from the mean velocity of the cluster galaxies, Delta v_z=450+-15 km/s and 730+-30 km/s, respectively. A small contribution from an additional gas velocity component, consistent with the cluster optical mean, is detected along a sightline near the cluster center. The combination of the observed velocity dispersions and bulk velocities is not described by a Kolmogorov velocity power spectrum of steady-state turbulence; instead, the data imply a much steeper effective slope (i.e., relatively more power at larger linear scales). This may indicate either a very large dissipation scale resulting in the suppression of small-scale motions, or a transient dynamic state of the cluster, where large-scale gas flows generated by an ongoing merger have not yet cascaded down to small scales.

astro-ph.HE↗

Measuring the asymmetric expansion of the Fe ejecta of Cassiopeia A with XRISM/Resolve

The expansion structure of supernova remnants (SNRs) is important for understanding not only how heavy elements are distributed into space, but also how supernovae explode. The ejecta expansion structure of the young core-collapse SNR Cas A is investigated, with Doppler parameter mapping of the Fe-K complex by the Resolve microcalorimeter onboard the X-ray Imaging and Spectroscopy Mission, XRISM. It is found that the Fe ejecta are blueshifted in the southeast (SE) and redshifted in the northwest (NW), indicating an incomplete shell structure, similar to the intermediate mass elements (IMEs), such as Si and S. The Fe has a velocity shift of $\sim1400$ km~s$^{-1}$ in the NW and $\sim2160$ km~s$^{-1}$ in the SE region, with the error range of a few 100s km~s$^{-1}$. These values are consistent with those for the IMEs in the NW region, whereas larger than those for the IMEs in the SE region, although the large error region prevented us from concluding which component has significantly higher velocity. The line broadening is larger in the center with values of $\sim$2000--3000~km~s$^{-1}$, and smaller near the edges of the remnant. The radial profiles of the Doppler shift and broadening of the IMEs and Fe indicate that the Fe ejecta may expand asymmetrically as IME ejacta, although the large error regions do not allow us to conclude it. Moreover, we see little bulk Doppler broadening of the Fe lines in the northeastern jet region whereas the IME lines exhibit significant broadening. No such narrow lines are detected in the NW region. These findings suggest an asymmetric expansion of the ejecta potentially driven by large-scale asymmetries originating from the supernova explosion. This interpretation aligns with the large-scale asymmetries predicted by models of neutrino-driven supernova explosions.

astro-ph.HE↗

In-orbit Performance of the Soft X-ray Imaging Telescope Xtend aboard XRISM

We present a summary of the in-orbit performance of the soft X-ray imaging telescope Xtend onboard the XRISM mission, based on in-flight observation data, including first-light celestial objects, calibration sources, and results from the cross-calibration campaign with other currently-operating X-ray observatories. XRISM/Xtend has a large field of view of $38.5'\times38.5'$, covering an energy range of 0.4--13 keV, as demonstrated by the first-light observation of the galaxy cluster Abell 2319. It also features an energy resolution of 170--180 eV at 6 keV, which meets the mission requirement and enables to resolve He-like and H-like Fe K$α$ lines. Throughout the observation during the performance verification phase, we confirm that two issues identified in SXI onboard the previous Hitomi mission -- light leakage and crosstalk events -- are addressed and suppressed in the case of Xtend. A joint cross-calibration observation of the bright quasar 3C273 results in an effective area measured to be $\sim420$ cm$^{2}$@1.5 keV and $\sim310$ cm$^{2}$@6.0 keV, which matches values obtained in ground tests. We also continuously monitor the health of Xtend by analyzing overclocking data, calibration source spectra, and day-Earth observations: the readout noise is stable and low, and contamination is negligible even one year after launch. A low background level compared to other major X-ray instruments onboard satellites, combined with the largest grasp ($Ω_{\rm eff}\sim60$ ${\rm cm^2~degree^2}$) of Xtend, will not only support Resolve analysis, but also enable significant scientific results on its own. This includes near future follow-up observations and transient searches in the context of time-domain and multi-messenger astrophysics.

astro-ph.IM↗

New CCD Driving Technique to Suppress Anomalous Charge Intrusion from Outside the Imaging Area for Soft X-ray Imager of Xtend onboard XRISM

The Soft X-ray Imager (SXI) is an X-ray CCD camera of the Xtend system onboard the X-Ray Imaging and Spectroscopy Mission (XRISM), which was successfully launched on September 7, 2023 (JST). During ground cooling tests of the CCDs in 2020/2021, using the flight-model detector housing, electronic boards, and a mechanical cooler, we encountered an unexpected issue. Anomalous charges appeared outside the imaging area of the CCDs and intruded into the imaging area, causing pulse heights to stick to the maximum value over a wide region. Although this issue has not occurred in subsequent tests or in orbit so far, it could seriously affect the imaging and spectroscopic performance of the SXI if it were to happen in the future. Through experiments with non-flight-model detector components, we successfully reproduced the issue and identified that the anomalous charges intrude via the potential structure created by the charge injection electrode at the top of the imaging area. To prevent anomalous charge intrusion and maintain imaging and spectroscopic performance that satisfies the requirements, even if this issue occurs in orbit, we developed a new CCD driving technique. This technique is different from the normal operation in terms of potential structure and its changes during imaging and charge injection. In this paper, we report an overview of the anomalous charge issue, the related potential structures, the development of the new CCD driving technique to prevent the issue, the imaging and spectroscopic performance of the new technique, and the results of experiments to investigate the cause of anomalous charges.

astro-ph.IM↗

Initial operations of the Soft X-ray Imager onboard XRISM

XRISM (X-Ray Imaging and Spectroscopy Mission) is an astronomical satellite with the capability of high-resolution spectroscopy with the X-ray microcalorimeter, Resolve, and wide field-of-view imaging with the CCD camera, Xtend. Xtend consists of the mirror assembly (XMA: X-ray Mirror Assembly) and detector (SXI: Soft X-ray Imager). The SXI is composed of CCDs, analog and digital electronics, and a mechanical cooler. After the successful launch on September 6th, 2023 (UT) and subsequent critical operations, the mission instruments were turned on and set up. The CCDs have been kept at the designed operating temperature of $-110^\circ$C after the electronics and cooling system were successfully set up. During the initial operation phase, which continued for more than a month after the critical operations, we verified the observation procedure, stability of the cooling system, all the observation options with different imaging areas and/or timing resolutions, and time-tagged and automated operations including those for South Atlantic Anomaly passages. We optimized the operation procedure and observation parameters including the cooler settings, imaging areas for the small window modes, and event selection algorithm. We summarize our policy and procedure of the initial operations for the SXI. We also report on a couple of issues we faced during the initial operations and lessons learned from them.

astro-ph.IM↗

Soft X-ray Imager of the Xtend system onboard XRISM

The Soft X-ray Imager (SXI) is the X-ray charge-coupled device (CCD) camera for the soft X-ray imaging telescope Xtend installed on the X-ray Imaging and Spectroscopy Mission (XRISM), which was adopted as a recovery mission for the Hitomi X-ray satellite and was successfully launched on 2023 September 7 (JST). In order to maximize the science output of XRISM, we set the requirements for Xtend and find that the CCD set employed in the Hitomi/SXI or similar, i.e., a $2 \times 2$ array of back-illuminated CCDs with a $200~μ$m-thick depletion layer, would be practically best among available choices, when used in combination with the X-ray mirror assembly. We design the XRISM/SXI, based on the Hitomi/SXI, to have a wide field of view of $38' \times 38'$ in the $0.4-13$ keV energy range. We incorporated several significant improvements from the Hitomi/SXI into the CCD chip design to enhance the optical-light blocking capability and to increase the cosmic-ray tolerance, reducing the degradation of charge-transfer efficiency in orbit. By the time of the launch of XRISM, the imaging and spectroscopic capabilities of the SXI has been extensively studied in on-ground experiments with the full flight-model configuration or equivalent setups and confirmed to meet the requirements. The optical blocking capability, the cooling and temperature control performance, and the transmissivity and quantum efficiency to incident X-rays of the CCDs are also all confirmed to meet the requirements. Thus, we successfully complete the pre-flight development of the SXI for XRISM.

astro-ph.IM↗

A detailed study on spectroscopic performance of SOI pixel detector with a pinned depleted diode structure for X-ray astronomy

We have been developing silicon-on-insulator (SOI) pixel detectors with a pinned depleted diode (PDD) structure, named "XRPIX", for X-ray astronomy. In our previous study, we successfully optimized the design of the PDD structure, achieving both the suppression of large leakage current and satisfactory X-ray spectroscopic performance. Here, we report a detailed study on the X-ray spectroscopic performance of the XRPIX with the optimized PDD structure. The data were obtained at $-60^\circ\mathrm{C}$ with the "event-driven readout mode", in which only a triggering pixel and its surroundings are read out. The energy resolutions in full width at half maximum at 6.4 keV are $178\pm1$ eV and $291\pm1$ eV for single-pixel and all-pixel event spectra, respectively. The all-pixel events include charge-sharing pixel events as well as the single-pixel events. These values are the best achieved in the history of our development. We argue that the gain non-linearity in the low energy side due to excessive charge injection to the charge-sensitive amplifier is a major factor to limit the current spectroscopic performance. Optimization of the amount of the charge injection is expected to lead to further improvement in the spectroscopic performance of XRPIX, especially for the all-pixel event spectrum.

astro-ph.IM↗

Feasibility study of upper atmosphere density measurement on the ISS by observations of the CXB transmitted through the Earth rim

Measurements of the upper atmosphere at ~100 km are important to investigate climate change, space weather forecasting, and the interaction between the Sun and the Earth. Atmospheric occultations of cosmic X-ray sources are an effective technique to measure the neutral density in the upper atmosphere. We are developing the instrument SUIM dedicated to continuous observations of atmospheric occultations. SUIM will be mounted on a platform on the exterior of the International Space Station for six months and pointed at the Earth's rim to observe atmospheric absorption of the cosmic X-ray background (CXB). In this paper, we conducted a feasibility study of SUIM by estimating the CXB statistics and the fraction of the non-X-ray background (NXB) in the observed data. The estimated CXB statistics are enough to evaluate the atmospheric absorption of CXB for every 15 km of altitude. On the other hand, the NXB will be dominant in the X-ray spectra of SUIM. Assuming that the NXB per detection area of SUIM is comparable to that of the soft X-ray Imager onboard Hitomi, the NXB level will be much higher than the CXB one and account for ~80% of the total SUIM spectra.

astro-ph.IM↗

SUIM project: measuring the upper atmosphere from the ISS by observations of the CXB transmitted through the Earth rim

The upper atmosphere at the altitude of 60-110 km, the mesosphere and lower thermosphere (MLT), has the least observational data of all atmospheres due to the difficulties of in-situ observations. Previous studies demonstrated that atmospheric occultation of cosmic X-ray sources is an effective technique to investigate the MLT. Aiming to measure the atmospheric density of the MLT continuously, we are developing an X-ray camera, "Soipix for observing Upper atmosphere as Iss experiment Mission (SUIM)", dedicated to atmospheric observations. SUIM will be installed on the exposed area of the International Space Station (ISS) and face the ram direction of the ISS to point toward the Earth rim. Observing the cosmic X-ray background (CXB) transmitted through the atmosphere, we will measure the absorption column density via spectroscopy and thus obtain the density of the upper atmosphere. The X-ray camera is composed of a slit collimator and two X-ray SOI-CMOS pixel sensors (SOIPIX), and will stand on its own and make observations, controlled by a CPU-embedded FPGA "Zynq". We plan to install the SUIM payload on the ISS in 2025 during the solar maximum. In this paper, we report the overview and the development status of this project.

astro-ph.IM↗

Status of Xtend telescope onboard X-Ray Imaging and Spectroscopy Mission (XRISM)

Xtend is one of the two telescopes onboard the X-ray imaging and spectroscopy mission (XRISM), which was launched on September 7th, 2023. Xtend comprises the Soft X-ray Imager (SXI), an X-ray CCD camera, and the X-ray Mirror Assembly (XMA), a thin-foil-nested conically approximated Wolter-I optics. A large field of view of $38^{\prime}\times38^{\prime}$ over the energy range from 0.4 to 13 keV is realized by the combination of the SXI and XMA with a focal length of 5.6 m. The SXI employs four P-channel, back-illuminated type CCDs with a thick depletion layer of 200 $μ$m. The four CCD chips are arranged in a 2$\times$2 grid and cooled down to $-110$ $^{\circ}$C with a single-stage Stirling cooler. Before the launch of XRISM, we conducted a month-long spacecraft thermal vacuum test. The performance verification of the SXI was successfully carried out in a course of multiple thermal cycles of the spacecraft. About a month after the launch of XRISM, the SXI was carefully activated and the soundness of its functionality was checked by a step-by-step process. Commissioning observations followed the initial operation. We here present pre- and post-launch results verifying the Xtend performance. All the in-orbit performances are consistent with those measured on ground and satisfy the mission requirement. Extensive calibration studies are ongoing.

astro-ph.IM↗

Probing Shocked Ejecta in SN 1987A with XRISM-Resolve: the effects of the gate valve closed

Supernova (SN) 1987A is widely regarded as an excellent candidate for leveraging the capabilities of the freshly launched XRISM satellite. Recent researches indicate that the X-ray emission from SN 1987A will increasingly originate from its ejecta in the years to come. In a previous study, we thoroughly examined the proficiency of XRISM-Resolve in identifying signatures of shocked ejecta in SN 1987A, synthesizing the XRISM-Resolve spectrum based on a state-of-the-art magneto-hydrodynamic simulation. However, following the satellite's launch, a technical issue arose with the XRISM instrument's gate valve, which failed to open, thereby affecting observations with the Resolve spectrometer. Here, we update our analysis, reevaluating our diagnostic approach under the assumption that the gate valve remains closed. We find that, even with the reduced instrumental capabilities, it will be possible to pinpoint the ejecta contribution through the study of the line profiles in the XRISM-Resolve spectrum of SN 1987A.

astro-ph.HE↗

Evaluation of the X-ray SOI pixel detector with the on-chip ADC

XRPIX is the monolithic X-ray SOI (silicon-on-insulator) pixel detector, which has a time resolution better than 10 $\rmμ$s as well as a high detection efficiency for X-rays above 10 keV. XRPIX is planned to be installed on future X-ray satellites. To mount on satellites, it is essential that the ADC (analog-to-digital converter) be implemented on the detector because such peripheral circuits must be as compact as possible to achieve a large imaging area in the limited space in satellites. Thus, we developed a new XRPIX device with the on-chip ADC, and evaluated its performances. As the results, the integral non-linearity was evaluated to be 6 LSB (least significant bit), equivalent to 36 eV. The differential non-linearity was less than 0.7 LSB, and input noise from the on-chip ADC was 5~$\rm{e^{-}}$. Also, we evaluated end-to-end performance including the sensor part as well as the on-chip ADC. As the results, energy resolution at 5.9 keV was 294 $\rm{\pm}$ 4 eV in full-width at half maximum for the best pixel.

astro-ph.IM↗

Mapping thermal emission in the synchrotron-dominated SNRs 330.2+1.0, 3C58, and RX J1713.7-3946

Since the discovery of synchrotron X-ray emission from the shell of the supernova remnant (SNR) SN 1006, multiple observations from Chandra and XMM-Newton have shown that many young SNRs produce synchrotron emission in X-rays. Among those, a few peculiar SNRs have their X-ray emission largely dominated by synchrotron radiation, showing no or only faint traces of thermal emission. In this paper, we report our mapping of the thermal emission in three emblematic synchrotron-dominated SNRs: G330.2+1.0, 3C58, and RX J1713.7-3946. We used a blind source separation method able to retrieve faint components from X-ray data in the form of Chandra and XMM-Newton observations. The thermal candidates disentangled by the algorithm were then used to select regions of extraction. We then analyzed the extracted spectra to assess their physical nature. We conclude that the components retrieved by the algorithm indeed represent the spatial distribution of the thermal emission in G330.2+1.0 and 3C58, and a likely thermal candidate in RX J1713.7-3946. Our findings confirm and expand on past studies.

astro-ph.HE↗

Hitomi-HXT deconvolution imaging of the Crab Nebula dazzled by the Crab pulsar

We develop a new deconvolution method to improve the angular resolution of the Crab Nebula image taken by the Hitomi HXT. Here, we extend the Richardson-Lucy method by introducing two components for the nebula and the Crab pulsar with regularization for smoothness and flux, respectively, and deconvolving multi-pulse-phase images simultaneously. The deconvolved nebular image at the lowest energy band of 3.6--15 keV looks consistent with the Chandra X-ray image. Above 15 keV, we confirm that the NuSTAR's findings that the nebula size decreases in higher energy bands. We find that the north-east side of the nebula becomes dark in higher energy bands. Our deconvolution method can be applicable for any telescope images of faint diffuse objects containing a bright point source.

astro-ph.HE↗

Design study and spectroscopic performance of SOI pixel detector with a pinned depleted diode structure for X-ray astronomy

We have been developing silicon-on-insulator (SOI) pixel detectors with a pinned depleted diode (PDD) structure, named "XRPIX", for X-ray astronomy. The PDD structure is formed in a thick p-type substrate, to which high negative voltage is applied to make it fully depleted. A pinned p-well is introduced at the backside of the insulator layer to reduce a dark current generation at the Si-SiO$_{2}$ interface and to fix the back-gate voltage of the SOI transistors. An n-well is further introduced between the p-well and the substrate to make a potential barrier between them and suppress a leakage current. An optimization study on the n-well dopant concentration is necessary because a higher dopant concentration could result in a higher potential barrier but also in a larger sense-node capacitance leading to a lower spectroscopic performance, and vice versa. Based on a device simulation, we fabricated five candidate chips having different n-well dopant concentrations. We successfully found out the best n-well design, which suppressed a large leakage current and showed satisfactory X-ray spectroscopic performance. Too low and too high n-well dopant concentration chips showed a large leakage current and degraded X-ray spectroscopic performance, respectively. We also found that the dependency of X-ray spectroscopic performance on the n-well dopant concentration can be largely explained by the difference in sense-node capacitance.

astro-ph.IM↗

Probing Shocked Ejecta in SN 1987A: A novel diagnostic approach using XRISM-Resolve

Supernova (SN) 1987A is one of the best candidates to exploit the capabilities of the freshly launched XRISM satellite. This celestial object offers the unique opportunity to study the evolution of a SN into a young supernova remnant. To date, the X-ray emission has been dominated by the shocked circumstellar medium (CSM), with no shocked ejecta firmly detected. However, recent studies provide compelling evidence that in the forthcoming years the X-ray emission from SN 1987A will increasingly stem from the ejecta. Our aim is to assess the proficiency of XRISM-Resolve high resolution spectrometer in pinpointing signatures of the shocked ejecta in SN 1987A. Taking advantage of a self consistent state-of-art magneto-hydrodynamic simulation that describes the evolution from SN 1987A to its remnant, we synthesized the XRISM-Resolve spectrum of SN 1987A, as it would be collected in the allocated observation during the performance verification phase, which is foreseen for 2024. Our predictions clearly show the leading role of shocked ejecta in shaping the profile of the emission lines. The Doppler broadening associated with the bulk motion along the line of sight of the rapidly expanding ejecta is shown to increase the line widths well above the values observed so far. The quantitative comparison between our synthetic spectra and the XRISM spectra will enable us to establish a strong connection between the broadened line emission and the freshly shocked ejecta. This, in turn, will allow us to retrieve the ejecta dynamics and chemical composition from the X-ray emission.

astro-ph.HE↗

Radiation-Induced Degradation Mechanism of X-ray SOI Pixel Sensors with Pinned Depleted Diode Structure

The X-ray Silicon-On-Insulator (SOI) pixel sensor named XRPIX has been developed for the future X-ray astronomical satellite FORCE. XRPIX is capable of a wide-band X-ray imaging spectroscopy from below 1 keV to a few tens of keV with a good timing resolution of a few tens of $μ$s. However, it had a major issue with its radiation tolerance to the total ionizing dose (TID) effect because of its thick buried oxide layer due to the SOI structure. Although new device structures introducing pinned depleted diodes dramatically improved radiation tolerance, it remained unknown how radiation effects degrade the sensor performance. Thus, this paper reports the results of a study of the degradation mechanism of XRPIX due to radiation using device simulations. In particular, mechanisms of increases in dark current and readout noise are investigated by simulation, taking into account the positive charge accumulation in the oxide layer and the increase in the surface recombination velocity at the interface between the sensor layer and the oxide layer. As a result, it is found that the depletion of the buried p-well at the interface increases the dark current, and that the increase in the sense-node capacitance increases the readout noise.

astro-ph.IM↗

Xtend, the Soft X-ray Imaging Telescope for the X-ray Imaging and Spectroscopy Mission (XRISM)

Xtend is a soft X-ray imaging telescope developed for the X-Ray Imaging and Spectroscopy Mission (XRISM). XRISM is scheduled to be launched in the Japanese fiscal year 2022. Xtend consists of the Soft X-ray Imager (SXI), an X-ray CCD camera, and the X-ray Mirror Assembly (XMA), a thin-foil-nested conically approximated Wolter-I optics. The SXI uses the P-channel, back-illuminated type CCD with an imaging area size of 31 mm on a side. The four CCD chips are arranged in a 2$\times$2 grid and can be cooled down to $-120$ $^{\circ}$C with a single-stage Stirling cooler. The XMA nests thin aluminum foils coated with gold in a confocal way with an outer diameter of 45~cm. A pre-collimator is installed in front of the X-ray mirror for the reduction of the stray light. Combining the SXI and XMA with a focal length of 5.6m, a field of view of $38^{\prime}\times38^{\prime}$ over the energy range from 0.4 to 13 keV is realized. We have completed the fabrication of the flight model of both SXI and XMA. The performance verification has been successfully conducted in a series of sub-system level tests. We also carried out on-ground calibration measurements and the data analysis is ongoing.

astro-ph.IM↗