arXiv subjects

Koji Yoshimura

Publications and source records attributed to Koji Yoshimura.

At least 19 recordsLinked to original sources

arXiv2026

Control of emission interval and timing in triggered periodic superradiance

To achieve more controllable development of coherence in solids, we investigated the effect of a trigger laser tuned to the superradiance transition wavelength on periodic superradiance observed in an Er:YSO crystal. For period control, applying the trigger laser reduced both the superradiance period and its variance, demonstrating enhanced controllability of coherence development dynamics. As the trigger laser power increased, both the period and the number of emitted superradiance photons decreased while maintaining a proportional relationship. This behavior is explained by a reduced superradiance threshold under a constant excitation rate and is reproduced by numerical simulations based on the Maxwell-Bloch equations. For timing control, we found that superradiance could be triggered even when the excitation laser alone was insufficient. This enabled us to control the emission timing of superradiance using short trigger pulses and provided a device capable of generating superradiance at desired timing.

physics.atom-ph↗

arXiv2025

Laser M\"ossbauer spectroscopy of ^{229}Th

M\"ossbauer spectroscopy is widely used in biochemistry, geology, and solid-state physics to obtain structural information on materials. Here, we extend this technique into the optical range using a vacuum ultraviolet laser to probe the low-energy nuclear transitions of thorium-229, doped in calcium fluoride crystals. We discover four distinct doping sites for the thorium ions, determine the characteristic electric field gradients emerging in the interaction with the host crystal, and identify the microscopic structure of the two dominant configurations. Site-selective laser excitation allows to study the isomeric state lifetime and laser-induced quenching for all sites. This laser-based M\"ossbauer spectroscopy provides a powerful probe of the nuclear environment, yielding foundational data for designing future solid-state nuclear clocks.

nucl-ex↗

arXiv2025

A cryogenic buffer gas beam source with in-situ ablation target replacement

The design and performance of a cryogenic buffer gas beam (CBGB) source with a load-lock system is presented. The ACME III electron electric dipole moment (eEDM) search experiment uses this source to produce a beam of cold, slow thorium monoxide (ThO) molecules. A key feature of the apparatus is its capability to replace ablation targets without interrupting vacuum or cryogenic conditions, increasing the average signal in the eEDM search. The source produces approximately $1.3 \times 10^{11}$ ground-state ThO molecules per pulse, with a rotational temperature of $4.8$ K, molecular beam solid angle of $0.31$ sr, and forward velocity of $200$ m/s. These parameters match the performance of traditional sources that require time-consuming thermal cycles for target replacement. A long-term yield improvement of about 40% is achieved when the load-lock system is used to replace targets biweekly.

physics.atom-ph↗

arXiv2025

X-ray-induced quenching of the $^{229}$Th clock isomer in CaF$_2$

Thorium-229 has the lowest nuclear-excited state (an isomer state) at approximately 8.356 eV, making it excitable with tabletop vacuum-ultraviolet lasers. Despite the recent success of laser excitation, the isomer quenching inside the solid-state environment remains unresolved. In this letter, we present experiments investigating X-ray-induced isomer quenching in the CaF$_2$ host, focusing on the effects of X-ray flux and temperature on the lifetime and yield of the isomer state. Our studies reveal a correlation between isomer production, isomer lifetime during irradiation, and post-irradiation afterglow of the target crystal across different temperatures, highlighting a strong relationship between isomer quenching and color-center dynamics. We developed a model to interpret the isomer quenching and the crystal's luminescence.

cond-mat.mtrl-sci↗

arXiv2024

Analytical and numerical studies of periodic superradiance

We conduct a theoretical study to understand the periodic superradiance observed in an Er:YSO crystal. First, we construct a model based on the Maxwell-Bloch equations for a reduced level system, a pair of superradiance states and a population reservoir state. Analysis of the eigenvalues of the linearized differential equations shows that periodic superradiance can be realized only for certain parameters. We also derive two-variable equations consisting of the coherence and population difference between the two superradiance states, which contain the essential feature of the periodic superradiance. The two-variable equations clarify a mathematical structure of this periodic phenomenon and give analytical forms of the period, pulse duration, and number of emitted photons. Our model successfully reproduces the periodic behavior, but the actual experimental parameters are found to be outside the parameter region for the periodic superradiance. This result implies that some other mechanism(s) is required. As one example, assuming that the field decay rate varies with the electric field, the periodic superradiance can be reproduced even under the actual experimental condition.

physics.atom-ph↗

arXiv2024

A method to detect the VUV photons from cooled $^{229}$Th:CaF$_2$ crystals

Thorium-229, with its exceptionally low-energy nuclear excited state, is a key candidate for developing nuclear clocks. $^{229}$Th-doped CaF$_2$ crystals, benefiting from calcium fluoride's wide band gap, show great promise as solid-state nuclear clock materials. These crystals are excited by vacuum ultraviolet (VUV) lasers, which over time cause radiation damage. Cooling the crystals can mitigate this damage but introduces a challenge: photoabsorption. This occurs when residual gas molecules condense on the crystal surface, absorbing VUV photons and deteriorating detection efficiency. To solve this, we developed a cooling technique using a copper shield to surround the crystal, acting as a cold trap. This prevents ice-layer formation, even at temperatures below $-100\,^\circ$C, preserving high VUV photon detection efficiency. Our study detailed the experimental cooling setup and demonstrated the effectiveness of the copper shield in maintaining crystal performance, a critical improvement for future solid-state nuclear clocks operating at cryogenic temperatures.

physics.ins-det↗

arXiv2024

Controlling $^{229}$Th isomeric state population in a VUV transparent crystal

The radioisotope Th-229 is renowned for its extraordinarily low-energy, long-lived nuclear first-excited state. This isomeric state can be excited by VUV lasers and the transition from the ground state has been proposed as a reference transition for ultra-precise nuclear clocks. Such nuclear clocks will find multiple applications, ranging from fundamental physics studies to practical implementations. Recent investigations extracted valuable constraints on the nuclear transition energy and lifetime, populating the isomer in stochastic nuclear decay of U-233 or Ac-229. However, to assess the feasibility and performance of the (solid-state) nuclear clock concept, time-controlled excitation and depopulation of the $^{229}$Th isomer together with time-resolved monitoring of the radiative decay are imperative. Here we report the population of the $^{229}$Th isomeric state through resonant X-ray pumping and detection of the radiative decay in a VUV transparent $^{229}$Th-doped CaF$_2$ crystal. The decay half-life is measured to $447\pm 25$ s, with a transition wavelength of $148.18 \pm 0.42$ nm and a radiative decay fraction consistent with unity. Furthermore, we report a new ``X-ray quenching'' effect which allows to de-populate the isomer on demand and effectively reduce the half-life by at least a factor 50. Such controlled quenching can be used to significantly speed up the interrogation cycle in future nuclear clock schemes. Our results show that full control over the $^{229}$Th nuclear isomer population can be achieved in a crystal environment. In particular, non-radiative decay processes that might lead to a broadening of the isomer transition linewidth are negligible, paving the way for the development of a compact and robust solid-state nuclear clock. Further studies are needed to reveal the underlying physical mechanism of the X-ray quenching effect.

nucl-ex↗

arXiv2023

Periodic super-radiance in Er:YSO crystal

We observed periodic optical pulses from an Er:YSO crystal during irradiating with an continuous-wave excitation laser. We refer to this new phenomenon as "periodic super-radiance". This periodicity can be understood qualitatively by a simple model, in which a cyclic process of a continuous supply of population inversion and a sudden burst of super-radiance is repeated. The excitation power dependences of peak interval and the pulse area can be interpreted with our simple model. In addition, the linewidth of super-radiance is much narrower than an inhomogeneous broadening in a crystal. This result suggests that only Er3+ ions in a specific environment are involved in super-radiance.

physics.atom-ph↗

arXiv2022

Community Engagement Frontier

This is the summary report of the Community Engagement Frontier for the Snowmass 2021 study of the future of particle physics. The report discusses a number of general issues of importance to the particle physics community, including (1) the relation of universities, national laboratories, and industry, (2) career paths for scientists engaged in particle physics, (3) diversity, equity, and inclusion, (4) physics education, (5) public education and outreach, (6) engagement with the government and public policy, and (7) the environmental and social impacts of particle physics.

physics.soc-ph↗

arXiv2022

High-sensitivity low-noise photodetector using large-area silicon photomultiplier

The application of silicon photomultiplier (SiPM) technology for weak-light detection at a single photon level has expanded thanks to its better photon detection efficiency in comparison to a conventional photomultiplier tube (PMT). SiPMs with large detection area have recently become commercially available, enabling applications where the photon flux is low both temporarily and spatially. On the other hand, several drawbacks exist in the usage of SiPMs such as a higher dark count rate, many readout channels, slow response time, and optical crosstalk; therefore, users need to carefully consider the trade-offs. This work presents a SiPM-embedded compact large-area photon detection module. Various techniques are adopted to overcome the disadvantages of SiPMs so that it can be generally utilized as an upgrade from a PMT. A simple cooling component and recently developed optical crosstalk suppression method are adopted to reduce the noise which is more serious for larger-area SiPMs. A dedicated readout circuit increases the response frequency and reduces the number of readout channels. We favorably compare this design with a conventional PMT and obtain both higher photon detection efficiency and larger-area acceptance.

physics.ins-det↗

arXiv2022

Summary Report Topical Group on Application and Industry Community Engagement Frontier Snowmass 2021

HEP community leads and operates cutting-edge experiments for the DOE Office of Science which have challenging sensing, data processing, and computing requirements that far surpass typical industrial applications. To make necessary progress in the energy, material, and fundamental sciences, development of novel technologies is often required to enable these advanced detector and accelerator programs. Our capabilities include efficient co-design, which is a prerequisite to enable the deployment of advanced techniques in a scientific setting where development spans from rapid prototyping to robust and reliable production scale. This applies across the design spectrum from the low level fabrication techniques to the high level software development. It underpins the requirement for a holistic approach of innovation that accelerates the cycle of technology development and deployment. The challenges set by the next generation of experiments requires a collaborative approach between academia, industry and national labs. Just a single stakeholder will be unable to deliver the technologies required for the success of the scientific goals. Tools and techniques developed for High Energy Physics (HEP) research can accelerate scientific discovery more broadly across DOE Office of Science and other federal initiatives and also benefit industry applications.

physics.soc-ph↗

arXiv2022

Programs Enabling Deep Technology Transfer from National Labs

To maximize the technology transfer potential, it is important to create an ecosystem for the inventors to adapt the technologies developed for basic science to successful commercial ventures. In this white paper we present a brief overview of technology transfer programs at high energy physics (HEP) laboratories with a focus on the programs at Fermilab and KEK, and identify opportunities and recommendations for increasing partnerships and commercialization at HEP-centric laboratories.

physics.soc-ph↗

arXiv2021

Suppression of the optical crosstalk in a multi-channel silicon photomultiplier array

We propose and study a method of optical crosstalk suppression for silicon photomultipliers (SiPMs) using optical filters. We demonstrate that attaching absorptive visible bandpass filters to the SiPM can substantially reduce the optical crosstalk. Measurements suggest that the absorption of near infrared light is important to achieve this suppression. The proposed technique can be easily applied to suppress the optical crosstalk in SiPMs in cases where filtering near infrared light is compatible with the application.

physics.ins-det↗

arXiv2020

Absolute X-ray energy measurement using a high-accuracy angle encoder

This paper presents an absolute X-ray photon energy measurement method that uses a Bond diffractometer. The proposed system enables the prompt and rapid in-situ measurement of photon energies in a wide energy range. The diffractometer uses a reference silicon single crystal plate and a highly accurate angle encoder called SelfA. We evaluate the performance of the system by repeatedly measuring the energy of the first excited state of the potassium-40 nuclide. The excitation energy is determined as 29829.39(6) eV. It is one order of magnitude more precise than the previous measurement. The estimated uncertainty of the photon energy measurement was 0.7 ppm as a standard deviation and the maximum observed deviation was 2 ppm.

physics.ins-det↗

arXiv2019

Development of a measurement system enabling the reconstruction of gamma-ray time spectra by simultaneous recording of energy and time information

We developed a measurement system that enables the reconstruction of γ-ray time spectra in cascade decay schemes. As this system records all the time and energy information of γ-rays, reconstruction is possible after the measurement. Therefore, the energy regions for the γ-ray identification can be optimized in complicated cascade decay schemes. Moreover, in this system we can record data with time-dependent parameters of external perturbations, such as applied magnetic fields, and consequently we can investigate the correlations and responses of γ-rays to the perturbation. This property fulfills the demands required for quantum information research with γ-rays.

physics.ins-det↗

arXiv2019

X-ray pumping of the Th-229 nuclear clock isomer

Thorium-229 is a unique case in nuclear physics: it presents a metastable first excited state Th-229m, just a few electronvolts above the nuclear ground state. This so-called isomer is accessible by VUV lasers, which allows transferring the amazing precision of atomic laser spectroscopy to nuclear physics. Being able to manipulate the Th-229 nuclear states at will opens up a multitude of prospects, from studies of the fundamental interactions in physics to applications as a compact and robust nuclear clock. However, direct optical excitation of the isomer or its radiative decay back to the ground state has not yet been observed, and a series of key nuclear structure parameters such as the exact energies and half-lives of the low-lying nuclear levels of Th-229 are yet unknown. Here we present the first active optical pumping into Th-229m. Our scheme employs narrow-band 29 keV synchrotron radiation to resonantly excite the second excited state, which then predominantly decays into the isomer. We determine the resonance energy with 0.07 eV accuracy, measure a half-life of 82.2 ps, an excitation linewidth of 1.70 neV, and extract the branching ratio of the second excited state into the ground and isomeric state respectively. These measurements allow us to re-evaluate gamma spectroscopy data that have been collected over 40~years.

nucl-ex↗

arXiv2019

Coherent two-photon emission from hydrogen molecules excited by counter-propagating laser pulses

We observed two-photon emission signals from the first vibrationally excited state of parahydrogen gas excited coherently by counter-propagating laser pulses. A single narrow-linewidth laser source was used to excite the parahydrogen molecules and induce the two-photon emission process. We measured how the signal energy depended on the detuning, target gas pressure, and input pulse energies. These results are qualitatively consistent with those obtained by numerical simulations based on the Maxwell-Bloch equations with one spatial dimension and one temporal dimension. This study of two-photon emission with counter-propagating injection is an important step toward neutrino mass spectroscopy.

physics.atom-ph↗

arXiv2018

Geometry-dependent spectra and coherent-transient measurement of nearly degenerate four-wave mixing using two-photon resonance

We study nearly degenerate four-wave mixing using a two-photon-allowed vibrational transition of parahydrogen. A signal photon is generated by a trigger photon and coherence among parahydrogen, which is prepared by two counterpropagating pump pulses. The dependence of the signal pulse energy on the trigger frequency are investigated. The measured spectra vary depending on the geometry. They shift depending on the direction of the signal pulse and on the small angle formed by the counterpropagating pump pulses. Furthermore, the dependence of signal pulse energy on the incident time of the trigger pulse is investigated. The measured signal pulse energy is high if the trigger pulse is slightly delayed with respect to the pump pulses. We demonstrate that these geometry-dependent spectra and coherent-transient response can be explained by using simple models.

physics.atom-ph↗