arXiv subjects

Koki Yamane

Publications and source records attributed to Koki Yamane.

12 recordsLinked to original sources

arXiv2026

A Reproducible and Physically Feasible Dynamic Parameter Identification Framework for a Low-Cost Robot Arm

This paper presents a reproducible and physically feasible dynamic parameter identification framework for CRANE-X7, a low-cost robot arm driven by modular smart actuators. To improve practical identifiability, products of inertia are removed according to approximate link symmetry, reducing the rigid-body model from 65 to 39 base parameters. Identification motions are hand-designed from structured single-joint and adjacent-joint primitives under practical joint-range limits. The proposed pipeline combines preprocessing, inverse-dynamics-regressor-based ordinary least squares (OLS), conditional semidefinite-programming (SDP) projection for feasibility recovery, and closed-loop input error (CLIE) refinement. Candidate solutions from 40 structured trajectories are analyzed in a common principal component analysis (PCA) space to select a statistically central representative model. Because statistical centrality alone does not ensure physical acceptability, the selected model is finally screened by an all-pose positive-definiteness audit of the inertia matrix and, when necessary, corrected by a localized post-CLIE SDP rescue step. Experiments show that the parameter cloud becomes progressively more concentrated from OLS to SDP and CLIE, while the final accepted model preserves high predictive accuracy on held-out validation motions. These results demonstrate a practical route to statistically coherent and physically feasible dynamic models for low-cost robot platforms.

cs.RO↗

arXiv2026

Refinement of Accelerated Demonstrations via Incremental Iterative Reference Learning Control for Fast Contact-Rich Imitation Learning

Fast execution of contact-rich manipulation is critical for practical deployment, yet providing fast demonstrations for imitation learning (IL) remains challenging: humans cannot demonstrate at high speed, and naively accelerating demonstrations alters contact dynamics and induces large tracking errors. We present a method to autonomously refine time-accelerated demonstrations by repurposing Iterative Reference Learning Control (IRLC) to iteratively update the reference trajectory from observed tracking errors. However, applying IRLC directly at high speed tends to produce larger early-iteration errors and less stable transients. To address this issue, we propose Incremental Iterative Reference Learning Control (I2RLC), which gradually increases the speed while updating the reference, yielding high-fidelity trajectories. We validate on real-robot whiteboard erasing and peg-in-hole tasks using a teleoperation setup with a compliance-controlled follower and a 3D-printed haptic leader. Both IRLC and I2RLC achieve up to 10x faster demonstrations with reduced tracking error; moreover, I2RLC improves spatial similarity to the original trajectories by 22.5% on average over IRLC across three tasks and multiple speeds (3x-10x). We then use the refined trajectories to train IL policies; the resulting policies execute faster than the demonstrations and achieve 100% success rates in the peg-in-hole task at both seen and unseen positions, with I2RLC-trained policies exhibiting lower contact forces than those trained on IRLC-refined demonstrations. These results indicate that gradual speed scheduling coupled with reference adaptation provides a practical path to fast, contact-rich IL.

cs.RO↗

arXiv2025

Decoupled Scaling 4ch Bilateral Control on the Cartesian coordinate by 6-DoF Manipulator using Rotation Matrix

Four-channel bilateral control is a method for achieving remote control with force feedback and adjustment operability by synchronizing the positions and forces of two manipulators. This is expected to significantly improve the operability of the remote control in contact-rich tasks. Among these, 4-channel bilateral control on the Cartesian coordinate system is advantageous owing to its suitability for manipulators with different structures and because it allows the dynamics in the Cartesian coordinate system to be adjusted by adjusting the control parameters, thus achieving intuitive operability for humans. This paper proposes a 4-channel bilateral control method that achieves the desired dynamics by decoupling each dimension in the Cartesian coordinate system regardless of the scaling factor.

cs.RO↗

arXiv2025

Design and Experimental Validation of Sensorless 4-Channel Bilateral Teleoperation for Low-Cost Manipulators

Teleoperation of low-cost manipulators is attracting increasing attention as a practical means of collecting demonstration data for imitation learning. However, most existing low-cost systems rely on unilateral position control without force feedback, while implementing force-feedback bilateral teleoperation is difficult because low-cost manipulators typically have low-resolution encoders and no joint torque sensors. This paper presents a sensorless 4-channel bilateral teleoperation framework that integrates identified nonlinear dynamics compensation with a disturbance-observer-based velocity and external-force estimation scheme. By interpreting the observer structure in the frequency domain, we clarify the coupling between the velocity- and external-force-estimation bandwidths and derive practical tuning guidelines based on the damping ratio and a single cutoff frequency. Real-robot experiments, including force-sensor comparison and teleoperation tasks, demonstrate that the proposed framework provides practically useful force estimates and enables stable teleoperation in high-speed and contact-rich scenarios under low-cost hardware constraints. As an application, imitation-learning experiments demonstrate that incorporating estimated force information into demonstrations improves task success rates in the tested contact-rich manipulation tasks.

cs.RO↗

arXiv2025

Motion Generation for Food Topping Challenge 2024: Serving Salmon Roe Bowl and Picking Fried Chicken

Although robots have been introduced in many industries, food production robots are yet to be widely employed because the food industry requires not only delicate movements to handle food but also complex movements that adapt to the environment. Force control is important for handling delicate objects such as food. In addition, achieving complex movements is possible by making robot motions based on human teachings. Four-channel bilateral control is proposed, which enables the simultaneous teaching of position and force information. Moreover, methods have been developed to reproduce motions obtained through human teachings and generate adaptive motions using learning. We demonstrated the effectiveness of these methods for food handling tasks in the Food Topping Challenge at the 2024 IEEE International Conference on Robotics and Automation (ICRA 2024). For the task of serving salmon roe on rice, we achieved the best performance because of the high reproducibility and quick motion of the proposed method. Further, for the task of picking fried chicken, we successfully picked the most pieces of fried chicken among all participating teams. This paper describes the implementation and performance of these methods.

cs.RO↗

arXiv2024

Variable-Speed Teaching-Playback as Real-World Data Augmentation for Imitation Learning

Because imitation learning relies on human demonstrations in hard-to-simulate settings, the inclusion of force control in this method has resulted in a shortage of training data, even with a simple change in speed. Although the field of data augmentation has addressed the lack of data, conventional methods of data augmentation for robot manipulation are limited to simulation-based methods or downsampling for position control. This paper proposes a novel method of data augmentation that is applicable to force control and preserves the advantages of real-world datasets. We applied teaching-playback at variable speeds as real-world data augmentation to increase both the quantity and quality of environmental reactions at variable speeds. An experiment was conducted on bilateral control-based imitation learning using a method of imitation learning equipped with position-force control. We evaluated the effect of real-world data augmentation on two tasks, pick-and-place and wiping, at variable speeds, each from two human demonstrations at fixed speed. The results showed a maximum 55% increase in success rate from a simple change in speed of real-world reactions and improved accuracy along the duration/frequency command by gathering environmental reactions at variable speeds.

cs.RO↗

arXiv2024

Four-Axis Adaptive Fingers Hand for Object Insertion: FAAF Hand

Robots operating in the real world face significant but unavoidable issues in object localization that must be dealt with. A typical approach to address this is the addition of compliance mechanisms to hardware to absorb and compensate for some of these errors. However, for fine-grained manipulation tasks, the location and choice of appropriate compliance mechanisms are critical for success. For objects to be inserted in a target site on a flat surface, the object must first be successfully aligned with the opening of the slot, as well as correctly oriented along its central axis, before it can be inserted. We developed the Four-Axis Adaptive Finger Hand (FAAF hand) that is equipped with fingers that can passively adapt in four axes (x, y, z, yaw) enabling it to perform insertion tasks including lid fitting in the presence of significant localization errors. Furthermore, this adaptivity allows the use of simple control methods without requiring contact sensors or other devices. Our results confirm the ability of the FAAF hand on challenging insertion tasks of square and triangle-shaped pegs (or prisms) and placing of container lids in the presence of position errors in all directions and rotational error along the object's central axis, using a simple control scheme.

cs.RO↗

arXiv2024

SAID-NeRF: Segmentation-AIDed NeRF for Depth Completion of Transparent Objects

Acquiring accurate depth information of transparent objects using off-the-shelf RGB-D cameras is a well-known challenge in Computer Vision and Robotics. Depth estimation/completion methods are typically employed and trained on datasets with quality depth labels acquired from either simulation, additional sensors or specialized data collection setups and known 3d models. However, acquiring reliable depth information for datasets at scale is not straightforward, limiting training scalability and generalization. Neural Radiance Fields (NeRFs) are learning-free approaches and have demonstrated wide success in novel view synthesis and shape recovery. However, heuristics and controlled environments (lights, backgrounds, etc) are often required to accurately capture specular surfaces. In this paper, we propose using Visual Foundation Models (VFMs) for segmentation in a zero-shot, label-free way to guide the NeRF reconstruction process for these objects via the simultaneous reconstruction of semantic fields and extensions to increase robustness. Our proposed method Segmentation-AIDed NeRF (SAID-NeRF) shows significant performance on depth completion datasets for transparent objects and robotic grasping.

cs.RO↗

arXiv2024

Loss Function Considering Dead Zone for Neural Networks

It is important to reveal the inverse dynamics of manipulators to improve control performance of model-based control. Neural networks (NNs) are promising techniques to represent complicated inverse dynamics while they require a large amount of motion data. However, motion data in dead zones of actuators is not suitable for training models decreasing the number of useful training data. In this study, based on the fact that the manipulator joint does not work irrespective of input torque in dead zones, we propose a new loss function that considers only errors of joints not in dead zones. The proposed method enables to increase in the amount of motion data available for training and the accuracy of the inverse dynamics computation. Experiments on actual equipment using a three-degree-of-freedom (DOF) manipulator showed higher accuracy than conventional methods. We also confirmed and discussed the behavior of the model of the proposed method in dead zones.

cs.RO↗

arXiv2024

Imitation Learning Inputting Image Feature to Each Layer of Neural Network

Imitation learning enables robots to learn and replicate human behavior from training data. Recent advances in machine learning enable end-to-end learning approaches that directly process high-dimensional observation data, such as images. However, these approaches face a critical challenge when processing data from multiple modalities, inadvertently ignoring data with a lower correlation to the desired output, especially when using short sampling periods. This paper presents a useful method to address this challenge, which amplifies the influence of data with a relatively low correlation to the output by inputting the data into each neural network layer. The proposed approach effectively incorporates diverse data sources into the learning process. Through experiments using a simple pick-and-place operation with raw images and joint information as input, significant improvements in success rates are demonstrated even when dealing with data from short sampling periods.

cs.RO↗

arXiv2023

Soft and Rigid Object Grasping With Cross-Structure Hand Using Bilateral Control-Based Imitation Learning

Object grasping is an important ability required for various robot tasks. In particular, tasks that require precise force adjustments during operation, such as grasping an unknown object or using a grasped tool, are difficult for humans to program in advance. Recently, AI-based algorithms that can imitate human force skills have been actively explored as a solution. In particular, bilateral control-based imitation learning achieves human-level motion speeds with environmental adaptability, only requiring human demonstration and without programming. However, owing to hardware limitations, its grasping performance remains limited, and tasks that involves grasping various objects are yet to be achieved. Here, we developed a cross-structure hand to grasp various objects. We experimentally demonstrated that the integration of bilateral control-based imitation learning and the cross-structure hand is effective for grasping various objects and harnessing tools.

cs.RO↗

arXiv2023

Precise Well-plate Placing Utilizing Contact During Sliding with Tactile-based Pose Estimation for Laboratory Automation

Micro well-plates are an apparatus commonly used in chemical and biological experiments that are a few centimeters thick and contain wells or divets. In this paper, we aim to solve the task of placing the well-plate onto a well-plate holder (referred to as holder). This task is challenging due to the holder's raised grooves being a few millimeters in height, with a clearance of less than 1 mm between the well-plate and holder, thus requiring precise control during placing. Our placing task has the following challenges: 1) The holder's detected pose is uncertain; 2) the required accuracy is at the millimeter to sub-millimeter level due to the raised groove's shallow height and small clearance; 3) the holder is not fixed to a desk and is susceptible to movement from external forces. To address these challenges, we developed methods including a) using tactile sensors for accurate pose estimation of the grasped well-plate to handle issue (1); b) sliding the well-plate onto the target holder while maintaining contact with the holder's groove and estimating its orientation for accurate alignment. This allows for high precision control (addressing issue (2)) and prevents displacement of the holder during placement (addressing issue (3)). We demonstrate a high success rate for the well-plate placing task, even under noisy observation of the holder's pose.

cs.RO↗