arXiv subjects

Konstantinos Moustakas

Publications and source records attributed to Konstantinos Moustakas.

30 records · Page 2Linked to original sources

arXiv2022

cMinMax: A Fast Algorithm to Find the Corners of an N-dimensional Convex Polytope

During the last years, the emerging field of Augmented & Virtual Reality (AR-VR) has seen tremendousgrowth. At the same time there is a trend to develop low cost high-quality AR systems where computing poweris in demand. Feature points are extensively used in these real-time frame-rate and 3D applications, thereforeefficient high-speed feature detectors are necessary. Corners are such special features and often are used as thefirst step in the marker alignment in Augmented Reality (AR). Corners are also used in image registration andrecognition, tracking, SLAM, robot path finding and 2D or 3D object detection and retrieval. Therefore thereis a large number of corner detection algorithms but most of them are too computationally intensive for use inreal-time applications of any complexity. Many times the border of the image is a convex polygon. For thisspecial, but quite common case, we have developed a specific algorithm, cMinMax. The proposed algorithmis faster, approximately by a factor of 5 compared to the widely used Harris Corner Detection algorithm. Inaddition is highly parallelizable. The algorithm is suitable for the fast registration of markers in augmentedreality systems and in applications where a computationally efficient real time feature detector is necessary.The algorithm can also be extended to N-dimensional polyhedrons.

cs.CV↗

arXiv2022

SHREC 2021: Classification in cryo-electron tomograms

Cryo-electron tomography (cryo-ET) is an imaging technique that allows three-dimensional visualization of macro-molecular assemblies under near-native conditions. Cryo-ET comes with a number of challenges, mainly low signal-to-noise and inability to obtain images from all angles. Computational methods are key to analyze cryo-electron tomograms. To promote innovation in computational methods, we generate a novel simulated dataset to benchmark different methods of localization and classification of biological macromolecules in tomograms. Our publicly available dataset contains ten tomographic reconstructions of simulated cell-like volumes. Each volume contains twelve different types of complexes, varying in size, function and structure. In this paper, we have evaluated seven different methods of finding and classifying proteins. Seven research groups present results obtained with learning-based methods and trained on the simulated dataset, as well as a baseline template matching (TM), a traditional method widely used in cryo-ET research. We show that learning-based approaches can achieve notably better localization and classification performance than TM. We also experimentally confirm that there is a negative relationship between particle size and performance for all methods.

eess.IV↗

arXiv2021

Fast mesh denoising with data driven normal filtering using deep variational autoencoders

Recent advances in 3D scanning technology have enabled the deployment of 3D models in various industrial applications like digital twins, remote inspection and reverse engineering. Despite their evolving performance, 3D scanners, still introduce noise and artifacts in the acquired dense models. In this work, we propose a fast and robust denoising method for dense 3D scanned industrial models. The proposed approach employs conditional variational autoencoders to effectively filter face normals. Training and inference are performed in a sliding patch setup reducing the size of the required training data and execution times. We conducted extensive evaluation studies using 3D scanned and CAD models. The results verify plausible denoising outcomes, demonstrating similar or higher reconstruction accuracy, compared to other state-of-the-art approaches. Specifically, for 3D models with more than 1e4 faces, the presented pipeline is twice as fast as methods with equivalent reconstruction error.

cs.CV↗

arXiv2021

Fast Spatio-temporal Compression of Dynamic 3D Meshes

3D representations of highly deformable 3D models, such as dynamic 3D meshes, have recently become very popular due to their wide applicability in various domains. This trend inevitably leads to a demand for storage and transmission of voluminous data sets, making the need for the design of a robust and reliable compression scheme a necessity. In this work, we present an approach for dynamic 3D mesh compression, that effectively exploits the spatio-temporal coherence of animated sequences, achieving low compression ratios without noticeably affecting the visual quality of the animation. We show that, on contrary to mainstream approaches that either exploit spatial (e.g., spectral coding) or temporal redundancies (e.g., PCA-based method), the proposed scheme, achieves increased efficiency, by projecting the differential coordinates sequence to the subspace of the covariance of the point trajectories. An extensive evaluation study, using different dynamic 3D models, highlights the benefits of the proposed approach in terms of both execution time and reconstruction quality, providing extremely low bit-per-vertex per-frame (bpvf) rates.

eess.SP↗

arXiv2021

SHREC 2021: Retrieval and classification of protein surfaces equipped with physical and chemical properties

This paper presents the methods that have participated in the SHREC 2021 contest on retrieval and classification of protein surfaces on the basis of their geometry and physicochemical properties. The goal of the contest is to assess the capability of different computational approaches to identify different conformations of the same protein, or the presence of common sub-parts, starting from a set of molecular surfaces. We addressed two problems: defining the similarity solely based on the surface geometry or with the inclusion of physicochemical information, such as electrostatic potential, amino acid hydrophobicity, and the presence of hydrogen bond donors and acceptors. Retrieval and classification performances, with respect to the single protein or the existence of common sub-sequences, are analysed according to a number of information retrieval indicators.

q-bio.BM↗

arXiv2021

Empowering cyberphysical systems of systems with intelligence

Cyber Physical Systems have been going into a transition phase from individual systems to a collecttives of systems that collaborate in order to achieve a highly complex cause, realizing a system of systems approach. The automotive domain has been making a transition to the system of system approach aiming to provide a series of emergent functionality like traffic management, collaborative car fleet management or large-scale automotive adaptation to physical environment thus providing significant environmental benefits (e.g air pollution reduction) and achieving significant societal impact. Similarly, large infrastructure domains, are evolving into global, highly integrated cyber-physical systems of systems covering all parts of the value chain. In practice, there are significant challenges in CPSoS applicability and usability to be addressed, i.e. even a small CPSoS such as a car consists several subsystems Decentralization of CPSoS appoints tasks to individual CPSs within the System of Systems. CPSoSs are heterogenous systems. They comprise of various, autonomous, CPSs, each one of them having unique performance capabilities, criticality level, priorities and pursued goals. all CPSs must also harmonically pursue system-based achievements and collaborate in order to make system-of-system based decisions and implement the CPSoS functionality. This survey will provide a comprehensive review on current best practices in connected cyberphysical systems. The basis of our investigation is a dual layer architecture encompassing a perception layer and a behavioral layer. Perception algorithms with respect to scene understanding (object detection and tracking, pose estimation), localization mapping and path planning are thoroughly investigated. Behavioural part focuses on decision making and human in the loop control.

eess.SY↗

arXiv2020

Enhancing an eco-driving gamification platform through wearable and vehicle sensor data integration

As road transportation has been identified as a major contributor of environmental pollution, motivating individuals to adopt a more eco-friendly driving style could have a substantial ecological as well as financial benefit. With gamification being an effective tool towards guiding targeted behavioural changes, the development of realistic frameworks delivering a high end user experience, becomes a topic of active research. This paper presents a series of enhancements introduced to an eco-driving gamification platform by the integration of additional wearable and vehicle-oriented sensing data sources, leading to a much more realistic evaluation of the context of a driving session.

cs.DC↗

arXiv2020

DMAPS Monopix developments in large and small electrode designs

LF-Monopix1 and TJ-Monopix1 are depleted monolithic active pixel sensors (DMAPS) in 150 nm LFoundry and 180 nm TowerJazz CMOS technologies respectively. They are designed for usage in high-rate and high-radiation environments such as the ATLAS Inner Tracker at the High-Luminosity Large Hadron Collider (HL-LHC). Both chips are read out using a column-drain readout architecture. LF-Monopix1 follows a design with large charge collection electrode where readout electronics are placed inside. Generally, this offers a homogeneous electrical field in the sensor and short drift distances. TJ-Monopix1 employs a small charge collection electrode with readout electronics separated from the electrode and an additional n-type implant to achieve full depletion of the sensitive volume. This approach offers a low sensor capacitance and therefore low noise and is typically implemented with small pixel size. Both detectors have been characterized before and after irradiation using lab tests and particle beams.

physics.ins-det↗

arXiv2020

3D Augmented Reality Tangible User Interface using Commodity Hardware

During the last years, the emerging field of Augmented and Virtual Reality (AR-VR) has seen tremendous growth. An interface that has also become very popular for the AR systems is the tangible interface or passive-haptic interface. Specifically, an interface where users can manipulate digital information with input devices that are physical objects. This work presents a low cost Augmented Reality system with a tangible interface that offers interaction between the real and the virtual world. The system estimates in real-time the 3D position of a small colored ball (input device), it maps it to the 3D virtual world and then uses it to control the AR application that runs in a mobile device. Using the 3D position of our "input" device, it allows us to implement more complicated interactivity compared to a 2D input device. Finally, we present a simple, fast and robust algorithm that can estimate the corners of a convex quadrangle. The proposed algorithm is suitable for the fast registration of markers and significantly improves performance compared to the state of the art.

cs.HC↗

arXiv2019

The Monopix chips: Depleted monolithic active pixel sensors with a column-drain read-out architecture for the ATLAS Inner Tracker upgrade

Two different depleted monolithic CMOS active pixel sensor (DMAPS) prototypes with a fully synchronous column-drain read-out architecture were designed and tested: LF-Monopix and TJ-Monopix. These chips are part of a R&D effort towards a suitable implementation of a CMOS DMAPS for the HL-LHC ATLAS Inner Tracker. LF-Monopix was developed using a 150nm CMOS process on a highly resistive substrate (>2 k$Ω\,$cm), while TJ-Monopix was fabricated using a modified 180 nm CMOS process with a 1 k$Ω\,$cm epi-layer for depletion. The chips differ in their front-end design, biasing scheme, pixel pitch, dimensions of the collecting electrode relative to the pixel size (large and small electrode design, respectively) and the placement of read-out electronics within such electrode. Both chips were operational after thinning down to 100 $\mathrmμ$m and additional back-side processing in LF-Monopix for total bulk depletion. The results in this work include measurements of their leakage current, noise, threshold dispersion, response to minimum ionizing particles and efficiency in test beam campaigns. In addition, the outcome from measurements after irradiation with neutrons up to a dose of $1\times10^{15}\,\mathrm{n_{eq} / cm}^{2}$ and its implications for future designs are discussed.

physics.ins-det↗

arXiv2018

Block-Based Spectral Processing of Static and Dynamic 3D Meshes using Orthogonal Iterations

Spectral methods are widely used in geometry processing of 3D models. They rely on the projection of the mesh geometry on the basis defined by the eigenvectors of the graph Laplacian operator, becoming computationally prohibitive as the density of the models increases. In this paper, we propose a novel approach for supporting fast and efficient spectral processing of dense 3D meshes, ideally suited for real-time compression and denoising scenarios. To achieve that, we apply the problem of tracking graph Laplacian eigenspaces via orthogonal iterations, exploiting potential spectral coherence between adjacent parts. To avoid perceptual distortions when a fixed number of eigenvectors is used for all the individual parts, we propose a flexible solution that automatically identifies the optimal subspace size for satisfying a given reconstruction quality constraint. Extensive simulations carried out with different 3D meshes in compression and denoising setups, showed that the proposed schemes are very fast alternatives of SVD based spectral processing while achieving at the same time similar or even better reconstruction quality. More importantly, the proposed approach can be employed by several other state-of-the-art denoising methods as a preprocessing step, optimizing both their reconstruction quality and their computational complexity.

eess.SP↗

arXiv2018

An Open-Source OpenSim Oculomotor Model for Kinematics and Dynamics Simulation

Physics-based modeling and dynamic simulation of human eye movements has significant implications for improving our understanding of the oculomotor system and treating various visuomotor disorders. We introduce an open-source biomechanical model of the human eye that can be used for kinematics and dynamics analysis. This model is based on the passive pulley hypothesis, constructed based on the data reported in literature regarding physiological measurements of the human eye and made publicly available. The model is implemented in OpenSim, which is an open-source framework for modeling and simulation of musculoskeletal systems. The model incorporates an eye globe, orbital suspension tissues and six extraocular muscles. The excitation and activation patterns for a variety of targets can be calculated using the proposed closed-loop fixation controller that drives the model to perform saccadic movements in a forward dynamics manner. The controller minimizes the error between the desired saccadic trajectory and the predicted movement. Consequently, this model enables the investigation muscle activation patterns during static fixation and analyze the dynamics of eye movements.

physics.bio-ph↗