arXiv subjects

Kostya

Publications and source records attributed to Kostya.

6 recordsLinked to original sources

arXiv2023

Conformal TiO$_2$ aerogel-like films by plasma deposition: from omniphobic antireflective coatings to perovskite solar cells photoelectrodes

The ability to control porosity in oxide thin films is one of the key factors that determine their properties. Despite the abundance of dry processes for the synthesis of oxide porous layers, the high porosity range is typically achieved by spin-coating-based wet chemical methods. Besides, special techniques such as supercritical drying are required to replace the pore liquid with air while maintaining the porous network. In this study, we propose a new method for the fabrication of ultra-porous titanium dioxide thin films at room or mild temperatures (T lower or equal to 120 degrees Celsius) by the sequential process involving plasma deposition and etching. These films are conformal to the substrate topography even for high-aspect-ratio substrates and show percolated porosity values above 85 percent that are comparable to advanced aerogels. The films deposited at room temperature are amorphous. However, they become partly crystalline at slightly higher temperatures presenting a distribution of anatase clusters embedded in the sponge-like structure. Surprisingly, the porous structure remains after annealing the films at 450 degrees Celsius in air, which increases the fraction of the embedded anatase nanocrystals. The films are antireflective, omniphobic, and photoactive becoming super-hydrophilic subjected to UV light irradiation The supported percolated nanoporous structure can be used as an electron-conducting electrode in perovskite solar cells. The properties of the cells depend on the aerogel film thickness reaching efficiencies close to those of commercial mesoporous anatase electrodes. This generic solvent-free synthesis is scalable and is applicable to ultra-high porous conformal oxides of different compositions with potential applications in photonics, optoelectronics, energy storage, and controlled wetting.

physics.app-ph↗

arXiv2023

Paper-based ZnO self-powered sensors and nanogenerators by plasma technology

Nanogenerators and self-powered nanosensors have shown the potential to power low-consumption electronics and human-machine interfaces, but their practical implementation requires reliable, environmentally friendly and scalable, processes for manufacturing and processing. This article presents a plasma synthesis approach for the fabrication of piezoelectric nanogenerators (PENGs) and self-powered sensors on paper substrates. Polycrystalline ZnO nanocolumnar thin films are deposited by plasma-enhanced chemical vapour deposition on common paper supports using a microwave electron cyclotron resonance reactor working at room temperature yielding high growth rates and low structural and interfacial stresses. Applying Kinetic Monte Carlo simulation, we elucidate the basic shadowing mechanism behind the characteristic microstructure and porosity of the ZnO thin films, relating them to an enhanced piezoelectric response to periodic and random inputs. The piezoelectric devices are assembled by embedding the ZnO films in PMMA and using Au electrodes in two different configurations: laterally and vertically contacted devices. We present the response of the laterally connected devices as a force sensor for low-frequency events with different answers to the applied force depending on the impedance circuit, i.e. load values range, a behaviour that is theoretically analyzed. The vertical devices reach power densities as high as 80 nW/cm2 with a mean power output of 20 nW/cm2. We analyze their actual-scenario performance by activation with a fan and handwriting. Overall, this work demonstrates the advantages of implementing plasma deposition for piezoelectric films to develop robust, flexible, stretchable, and enhanced-performance nanogenerators and self-powered piezoelectric sensors compatible with inexpensive and recyclable supports

physics.app-ph↗

arXiv2022

Plasma-Electric Field Controlled Growth of Oriented Graphene for Energy Storage Applications

Graphene is well known to grow as flat sheets aligned with the growth substrate. Oriented graphene structures typically normal to the substrate have recently gained major attention. Most often, normal orientation is achieved in plasma-assisted growth and is believed to be due to plasma induced in-built electric field, which is usually oriented normal to the substrate. This work focuses on the effect of in-built electric field on growth direction, morphology, interconnectedness, and physical properties of various configurations of graphene structures and reveals the unique dependence of these features on electric field orientation. It is shown that tilting of growth substrates from parallel to normal direction with respect to the direction of inbuilt plasma electric field leads to the morphological transitions from flat graphene structure, to oriented individual graphene sheets and then interconnected three-dimensional networks of oriented graphene sheets. The revealed transition of the growth orientation leads to change in wetting nature, types of defect in graphitic structures as well as affects their charge storage capacity when used as supercapacitor electrodes. This simple and versatile approach opens new opportunities for the production of potentially large batches of differently oriented and structured graphene sheets in one production run.

cond-mat.mtrl-sci↗

arXiv2022

Nanoparticle-enhanced Multifunctional Nanocarbons as Metal-ion Battery and Capacitor Anodes and Supercapacitor Electrodes -- Review

As renewable energy is becoming a critical energy source to meet the global demand, electrochemical energy storage devices become indispensable for the efficient energy storage and reliable supply. The electrode material is the key factor determining the energy storage capacity and the power delivery of the devices. Carbon-based materials are emerging as a viable candidate for electrodes, yet their low energy densities impede the development of advanced energy storage materials. Nanoparticle decoration of the carbon structures is one of the most promising and easy-to-implement a strategy to enhance the charge-storage performance of carbon-based electrodes. Decoration by nanoparticles of metals, metal oxides, nitrides, carbides, phosphides, chalcogenides, and bimetallic components lead to significant enhancements in the structural and electronic properties, pore refinement, charge storage, and charge transfer kinetics of both pristine and doped carbon structures, thereby making their performance promising for next-generation energy storage devices. This review covers the state-of-art nanoparticle decorated nanocarbons for battery, supercapacitor, and metal-ion capacitor applications. A critical analysis of the elemental composition, structure, associated physico-chemical properties and performance relationships of nanoparticle-decorated nanocarbon electrodes is provided as well to inform the future development of the next generation of advanced energy storage materials, devices, and systems.

physics.app-ph↗

arXiv2021

Low Temperature Plasma for Biology, Hygiene, and Medicine: Perspective and Roadmap

Plasma, the fourth and most pervasive state of matter in the visible universe, is a fascinating medium that is connected to the beginning of our universe itself. Man-made plasmas are at the core of many technological advances that include the fabrication of semiconductor devices, which enabled the modern computer and communication revolutions. The introduction of low temperature, atmospheric pressure plasmas to the biomedical field has ushered a new revolution in the healthcare arena that promises to introduce plasma-based therapies to combat some thorny and long-standing medical challenges. This paper presents an overview of where research is at today and discusses innovative concepts and approaches to overcome present challenges and take the field to the next level. It is written by a team of experts who took an in-depth look at the various biomedical applications, made critical analysis, and proposed ideas and concepts that should help the research community focus their efforts on clear and practical steps necessary to keep the field advancing for decades to come.

physics.med-ph↗

arXiv2008

Controlling electronic and adiabatic isolation of quantum dots from the substrate: An ionization-energy theoretic study

Recent controversy on the quantum dots dephasing mechanisms (between pure and inelastic) is re-examined by isolating the quantum dots from their substrate by using the appropriate limits of the ionization energy theory and the quantum adiabatic theorem. When the phonons in the quantum dots are isolated adiabatically from the phonons in the substrate, the elastic or pure dephasing becomes the dominant mechanism. On the other hand, for the case where the phonons from the substrate are non-adiabatically coupled to the quantum dots, the inelastic dephasing process takes over. This switch-over is due to different elemental composition in quantum dots as compared to its substrate. We also provide unambiguous analyses as to understand why GaAs/AlGaAs quantum dots may only have pure dephasing while InAs/GaAs quantum dots give rise to the inelastic dephasing as the dominant mechanism. Our study accentuates the importance of the elemental composition (of both quantum dots and substrate) in evaluating the dephasing mechanisms of quantum dots.

cond-mat.mes-hall↗