arXiv subjects

Kosuke Sato

Publications and source records attributed to Kosuke Sato.

At least 37 records · Page 2Linked to original sources

arXiv2025

Comparing XRISM cluster velocity dispersions with predictions from cosmological simulations: are feedback models too ejective?

The dynamics of the intra-cluster medium (ICM), the hot plasma that fills galaxy clusters, are shaped by gravity-driven cluster mergers and feedback from supermassive black holes (SMBH) in the cluster cores. XRISM measurements of ICM velocities in several clusters offer insights into these processes. We compare XRISM measurements for nine galaxy clusters (Virgo, Perseus, Centaurus, Hydra A, PKS\,0745--19, A2029, Coma, A2319, Ophiuchus) with predictions from three state-of-the-art cosmological simulation suites, TNG-Cluster, The Three Hundred Project GADGET-X, and GIZMO-SIMBA, that employ different models of feedback. In cool cores, XRISM reveals systematically lower velocity dispersions than the simulations predict, with all ten measurements below the median simulated values by a factor $1.5-1.7$ on average and all falling within the bottom $10\%$ of the predicted distributions. The observed kinetic-to-total pressure ratio is also lower, with a median value of $2.2\%$, compared to the predicted $5.0-6.5\%$ for the three simulations. Outside the cool cores and in non-cool-core clusters, simulations show better agreement with XRISM measurements, except for the outskirts of the relaxed, cool-core cluster A2029, which exhibits an exceptionally low kinetic pressure support ($<1\%$), with none of the simulated systems in either of the three suites reaching such low levels. The non-cool-core Coma and A2319 exhibit dispersions at the lower end but within the simulated spread. Our comparison suggests that the three numerical models may overestimate the kinetic effects of SMBH feedback in cluster cores. Additional XRISM observations of non-cool-core clusters will clarify if there is a systematic tension in the gravity-dominated regime as well.

astro-ph.GA↗

arXiv2025

Suzaku observations of outskirts of nearby clusters and groups: I. electron density and gas fraction to the virial radius

We present an analysis of Suzaku observations of 14 nearby galaxy clusters and groups (z < 0.06), extending radial coverage out to the virial radius (approximately r200). The sample spans a wide mass range, from M500 about 2x10^13 to 7x10^14 solar masses, and includes well-studied systems such as Coma, Perseus, and Virgo. We carefully modeled all background components, including the soft X-ray foregrounds (the Local Hot Bubble, Milky Way Halo, and super-virial temperature components), the cosmic X-ray background, and the non-X-ray background, and assessed their effects on the derived properties of the intracluster medium (ICM). We constructed radial profiles of emission measure, electron density, and temperature. Temperatures decrease smoothly with radius, typically dropping to about one-third to half of their peak values near r200. For relaxed clusters, the emission measure profiles outside the core regions are well described by a beta model with beta around 0.6-0.7, while groups show slightly flatter slopes of beta around 0.4-0.65. Beyond r2500, electron density profiles follow a power-law decline with a slope close to 2. At r500 and r200, the electron density and the gas mass fraction show a tight correlation with the system mass, except for three clusters with bright subclusters. In massive clusters, the gas fraction increases with radius and approaches the cosmic baryon fraction near r200. In contrast, lower-mass systems exhibit gas fractions of around 0.1 at r200. The observed mass dependence of gas fractions suggests that feedback and related processes play an increasingly important role toward the group scale, shaping the connection between baryons and dark matter halos.

astro-ph.GA↗

arXiv2025

Stratified wind from a super-Eddington X-ray binary is slower than expected

Accretion discs in strong gravity ubiquitously produce winds, seen as blueshifted absorption lines in the X-ray band of both stellar mass X-ray binaries (black holes and neutron stars), and supermassive black holes. Some of the most powerful winds (termed Eddington winds) are expected to arise from systems where radiation pressure is sufficient to unbind material from the inner disc ($L\gtrsim L_{\rm Edd}$). These winds should be extremely fast and carry a large amount of kinetic power, which, when associated with supermassive black holes, would make them a prime contender for the feedback mechanism linking the growth of those black holes with their host galaxies. Here we show the XRISM Resolve spectrum of the Galactic neutron star X-ray binary, GX 13+1, which reveals one of the densest winds ever seen in absorption lines. This Compton-thick wind significantly attenuates the flux, making it appear faint, although it is intrinsically more luminous than usual ($L\gtrsim L_{\rm Edd}$). However, the wind is extremely slow, more consistent with the predictions of thermal-radiative winds launched by X-ray irradiation of the outer disc, than with the expected Eddington wind driven by radiation pressure from the inner disc. This puts new constraints on the origin of winds from bright accretion flows in binaries, but also highlights the very different origin required for the ultrafast ($v\sim 0.3c$) winds seen in recent Resolve observations of a supermassive black hole at similarly high Eddington ratio.

astro-ph.HE↗

arXiv2025

XRISM observations of solar flare X-ray emission reflected in the Earth's atmosphere

The X-ray Imaging and Spectroscopy Mission (XRISM), launched into low-Earth orbit in 2023, observes the reflection of solar flare X-rays in the Earth's atmosphere as a by-product of celestial observations. Using a $\sim$one-year data set covering from October 2023 to November 2024, we report on our first results of the measurement of the metal abundance pattern and high-resolution Fe-K spectroscopy. The abundances of Mg, Si, S, Ar, Ca, and Fe measured with the CCD detector Xtend during M- and X-class flares show the inverse-first-ionization-potential (inverse-FIP) effect, which is consistent with the results of Katsuda et al., ApJ, 2020 using the Suzaku satellite. The abundances of Si, S, and Ar are found to decrease with increasing flare magnitude, which is consistent with the theoretical model by Laming (Laming, ApJ, 2021), whereas Ca exhibits an opposite trend. The large effective area and field of view of Xtend allow us to trace the evolution of the abundances in several X-class flare loops on a timescale of a few 100 s, finding an enrichment of low-FIP elements before flare peaks. The high-resolution Fe-K spectrum obtained with the microcalorimeter Resolve successfully separates the Rayleigh- and Compton-scattered Fe XXIV/XXV lines and neutral or low-ionized Fe-K$α$ lines. The neutral/low-ionized Fe-K$α$ equivalent width shows an anti-correlation with hard X-ray flux with the best-fit power-law slope of $-0.14 \pm 0.09$, suggesting that hard X-rays from flare loops are stimulating the Fe K$α$ fluorescence. This work demonstrates that XRISM can be a powerful tool in the field of solar physics, offering valuable high-statistic CCD data and high-resolution microcalorimeter spectra in the energy range extending to the Fe-K band.

astro-ph.SR↗

arXiv2025

XRISM/Resolve View of Abell 2319: Turbulence, Sloshing, and ICM Dynamics

We present results from XRISM/Resolve observations of the core of the galaxy cluster Abell 2319, focusing on its kinematic properties. The intracluster medium (ICM) exhibits temperatures of approximately 8 keV across the core, with a prominent cold front and a high-temperature region ($\sim$11 keV) in the northwest. The average gas velocity in the 3 arcmin $\times$ 4 arcmin region around the brightest cluster galaxy (BCG) covered by two Resolve pointings is consistent with that of the BCG to within 40 km s$^{-1}$ and we found modest average velocity dispersion of 230-250 km s$^{-1}$. On the other hand, spatially-resolved spectroscopy reveals interesting variations. A blueshift of up to $\sim$230 km s$^{-1}$ is observed around the east edge of the cold front, where the gas with the lowest specific entropy is found. The region further south inside the cold front shows only a small velocity difference from the BCG; however, its velocity dispersion is enhanced to 400 km s$^{-1}$, implying the development of turbulence. These characteristics indicate that we are observing sloshing motion with some inclination angle following BCG and that gas phases with different specific entropy participate in sloshing with their own velocities, as expected from simulations. No significant evidence for a high-redshift ICM component associated with the subcluster Abell 2319B was found in the region covered by the current Resolve pointings. These results highlight the importance of sloshing and turbulence in shaping the internal structure of Abell 2319. Further deep observations are necessary to better understand the mixing and turbulent processes within the cluster.

astro-ph.HE↗

arXiv2025

XRISM Observation of the Ophiuchus Galaxy Cluster: Quiescent Velocity Structure in the Dynamically Disturbed Core

We present the high-resolution X-rayspectroscopic observations of the Ophiuchus galaxy cluster core using the XRISM satellite. Despite previous observations revealing multiple cold fronts and dynamical disturbances in the cluster core, our XRISM observations show low gas velocity dispersions of sigma_v = 115 +/- 7 km s^-1 in the inner region (~< 25 kpc) and sigma_v = 186 +/- 9 km s^-1 in the outer region (~ 25-50 kpc). The gas temperatures are kT = 5.8 +/- 0.2 keV and 8.4 +/- 0.2 keV for the inner and outer regions, respectively, with metal abundances of Z = 0.75 +/- 0.03 Z_sun (inner) and 0.44 +/- 0.02 Z_sun (outer). The measured velocity dispersions correspond to nonthermal pressure fractions of only 1.4 +/- 0.2% (inner) and 2.5 +/- 0.2% (outer), indicating highly subsonic turbulence. Our analysis of the bulk gas motion indicates that the gas in the inner region is nearly at rest relative to the central galaxy (|v_bulk| = 8 +/- 7 km s^-1), while the outer region exhibits a moderate motion of |v_bulk| = 104 +/- 7 km s^-1. Assuming the velocity dispersion arises from turbulent motions, the turbulent heating rate is ~ 40\% of the radiative cooling rate, although there is some uncertainty. This suggests that the heating and cooling of the gas are not currently balanced. The activity of the central active galactic nucleus (AGN) has apparently weakened. The sloshing motion that created the cold fronts may now be approaching a turning point at which the velocity is minimum. Alternatively, the central galaxy and the associated hot gas could be moving nearly parallel to the plane of the sky.

astro-ph.HE↗

arXiv2025

XRISM Reveals a Remnant Torus in the Low-Luminosity AGN M81*

Up to 40% of galaxies in the local universe host a low-luminosity active galactic nucleus (LLAGN), making it vital to understand this mode of black hole accretion. However, the presence or absence of Seyfert-like geometries - an accretion disk close to the black hole, an optical broad line region (BLR), and a molecular torus - remains uncertain owing to the low flux levels of sources within this class. Herein, we present an analysis of a XRISM/Resolve spectrum of M81*, the LLAGN in the heart of the nearby spiral galaxy M81. A weak, neutral Fe K emission line is detected and resolved into K$_{α,1}$ and K$_{α,2}$ components. It shows a negligible velocity shift, and weak broadening (FWHM$=460^{+260}_{-160}~{\rm km}~{\rm s}^{-1}$) that corresponds to an inner emission radius of ${\rm r} \geq 2.7\times 10^{4}~GM/c^{2}$ for likely inclinations. The Fe K$_α$ line likely traces a torus. The upper limit on additional splitting of the Fe K$_α$ line components translates to a limit on the local magnetic field of ${\rm B} \leq 3.5\times 10^{8}$ Gauss, assuming Zeeman splitting. The spectra also reveal ionized plasma(s) through He-like Fe XXV and H-like Fe XXVI emission lines. These can be fit equally well assuming photoionization and collisional excitation. The H-like Fe XXVI line is better described when a second component is included with a red-shift of ${\rm v} = 1600~{\rm km}~{\rm s}^{-1}$, but this addition is of marginal statistical significance. We discuss these results in the context of radiatively inefficient accretion flow models, magnetically arrested disks, and possible links to the Fermi bubbles in the Milky Way.

astro-ph.HE↗

arXiv2025

Constraining gas motion and non-thermal pressure beyond the core of the Abell 2029 galaxy cluster with XRISM

We report a detailed spectroscopic study of the gas dynamics and hydrostatic mass bias of the galaxy cluster Abell 2029, utilizing high-resolution observations from XRISM Resolve. Abell 2029, known for its cool core and relaxed X-ray morphology, provides an excellent opportunity to investigate the influence of gas motions beyond the central region. Expanding upon prior studies that revealed low turbulence and bulk motions within the core, our analysis covers regions out to the scale radius $R_{2500}$ (670~kpc) based on three radial pointings extending from the cluster center toward the northern side. We obtain accurate measurements of bulk and turbulent velocities along the line of sight. The results indicate that non-thermal pressure accounts for no more than 2% of the total pressure at all radii, with a gradual decrease outward. The observed radial trend differs from many numerical simulations, which often predict an increase in non-thermal pressure fraction at larger radii. These findings suggest that deviations from hydrostatic equilibrium are small, leading to a hydrostatic mass bias of around 2% across the observed area.

astro-ph.CO↗

arXiv2025

XRISM forecast for the Coma cluster: stormy, with a steep power spectrum

The XRISM Resolve microcalorimeter array measured the velocities of hot intracluster gas at two positions in the Coma galaxy cluster: 3'x3' squares at the center and at 6' (170 kpc) to the south. We find the line-of-sight velocity dispersions in those regions to be sigma_z=208+-12 km/s and 202+-24 km/s, respectively. The central value corresponds to a 3D Mach number of M=0.24+-0.015 and the ratio of the kinetic pressure of small-scale motions to thermal pressure in the intracluster plasma of only 3.1+-0.4%, at the lower end of predictions from cosmological simulations for merging clusters like Coma, and similar to that observed in the cool core of the relaxed cluster A2029. Meanwhile, the gas in both regions exhibits high line-of-sight velocity differences from the mean velocity of the cluster galaxies, Delta v_z=450+-15 km/s and 730+-30 km/s, respectively. A small contribution from an additional gas velocity component, consistent with the cluster optical mean, is detected along a sightline near the cluster center. The combination of the observed velocity dispersions and bulk velocities is not described by a Kolmogorov velocity power spectrum of steady-state turbulence; instead, the data imply a much steeper effective slope (i.e., relatively more power at larger linear scales). This may indicate either a very large dissipation scale resulting in the suppression of small-scale motions, or a transient dynamic state of the cluster, where large-scale gas flows generated by an ongoing merger have not yet cascaded down to small scales.

astro-ph.HE↗

arXiv2025

Optimization of x-ray event screening using ground and in-orbit data for the Resolve instrument onboard the XRISM satellite

The XRISM (X-Ray Imaging and Spectroscopy Mission) satellite was successfully launched and put into a low-Earth orbit on September 6, 2023 (UT). The Resolve instrument onboard XRISM hosts an x-ray microcalorimeter detector, which was designed to achieve a high-resolution ($\leq$7 eV FWHM at 6 keV), high-throughput, and non-dispersive spectroscopy over a wide energy range. It also excels in a low background with a requirement of $< 2 \times 10^{-3}$ s$^{-1}$ keV$^{-1}$ (0.3--12.0 keV), which is equivalent to only one background event per spectral bin per 100 ks exposure. Event screening to discriminate x-ray events from background is a key to meeting the requirement. We present the result of the Resolve event screening using data sets recorded on the ground and in orbit based on the heritage of the preceding x-ray microcalorimeter missions, in particular, the Soft X-ray Spectrometer (SXS) onboard ASTRO-H. We optimize and evaluate 19 screening items of three types based on (1) the event pulse shape, (2) relative arrival times among multiple events, and (3) good time intervals. We show that the initial screening, which is applied for science data products in the performance verification phase, reduces the background rate to $1.8 \times 10^{-3}$ s$^{-1}$ keV$^{-1}$ meeting the requirement. We further evaluate the additional screening utilizing the correlation among some pulse shape properties of x-ray events and show that it further reduces the background rate particularly in the $<$2 keV band. Over 0.3--12 keV, the background rate becomes $1.0 \times 10^{-3}$ s$^{-1}$ keV$^{-1}$.

astro-ph.IM↗

arXiv2024

Casper DPM: Cascaded Perceptual Dynamic Projection Mapping onto Hands

We present a technique for dynamically projecting 3D content onto human hands with short perceived motion-to-photon latency. Computing the pose and shape of human hands accurately and quickly is a challenging task due to their articulated and deformable nature. We combine a slower 3D coarse estimation of the hand pose with high speed 2D correction steps which improve the alignment of the projection to the hands, increase the projected surface area, and reduce perceived latency. Since our approach leverages a full 3D reconstruction of the hands, any arbitrary texture or reasonably performant effect can be applied, which was not possible before. We conducted two user studies to assess the benefits of using our method. The results show subjects are less sensitive to latency artifacts and perform faster and with more ease a given associated task over the naive approach of directly projecting rendered frames from the 3D pose estimation. We demonstrate several novel use cases and applications.

cs.GR↗

arXiv2024

Projection Mapping under Environmental Lighting by Replacing Room Lights with Heterogeneous Projectors

Projection mapping (PM) is a technique that enhances the appearance of real-world surfaces using projected images, enabling multiple people to view augmentations simultaneously, thereby facilitating communication and collaboration. However, PM typically requires a dark environment to achieve high-quality projections, limiting its practicality. In this paper, we overcome this limitation by replacing conventional room lighting with heterogeneous projectors. These projectors replicate environmental lighting by selectively illuminating the scene, excluding the projection target. Our contributions include a distributed projector optimization framework designed to effectively replicate environmental lighting and the incorporation of a large-aperture projector, in addition to standard projectors, to reduce high-luminance emitted rays and hard shadows -- undesirable factors for collaborative tasks in PM. We conducted a series of quantitative and qualitative experiments, including user studies, to validate our approach. Our findings demonstrate that our projector-based lighting system significantly enhances the contrast and realism of PM results even under environmental lighting compared to typical lights. Furthermore, our method facilitates a substantial shift in the perceived color mode from the undesirable aperture-color mode, where observers perceive the projected object as self-luminous, to the surface-color mode in PM.

cs.GR↗

arXiv2023

Topology Optimization with Text-Guided Stylization

We propose an approach for the generation of topology-optimized structures with text-guided appearance stylization. This methodology aims to enrich the concurrent design of a structure's physical functionality and aesthetic appearance. Users can effortlessly input descriptive text to govern the style of the structure. Our system employs a hash-encoded neural network as the implicit structure representation backbone, which serves as the foundation for the co-optimization of structural mechanical performance, style, and connectivity, to ensure full-color, high-quality 3D-printable solutions. We substantiate the effectiveness of our system through extensive comparisons, demonstrations, and a 3D printing test.

cs.CE↗

arXiv2023

The soft X-ray background with Suzaku II: Supervirial temperature bubbles?

Observations of the hot X-ray emitting interstellar medium in the Milky Way are important for studying the stellar feedback and understanding the formation and evolution of galaxies. We present measurements of the soft X-ray background emission for 130 Suzaku observations at $75^\circ 15^\circ$. With the standard soft X-ray background model consisting of the local hot bubble and the Milky Way halo, residual structures remain at 0.7--1 keV in the spectra of some regions. Adding a collisional-ionization-equilibrium component with a temperature of $\sim$0.8 keV, much higher than the virial temperature of the Milky Way, significantly reduces the derived C-statistic for 56 out of 130 observations. The emission measure of the 0.8 keV component varies by more than an order of magnitude: Assuming the solar abundance, the median value is 3$\times 10^{-4}~ \rm{cm^{-6} pc}$ and the 16th-84th percentile range is (1--8)$\times 10^{-4}~ \rm{cm^{-6} pc}$. Regions toward the Orion-Eridanus Superbubble, a large cavity extending from the Ori OB1 association, have the highest emission measures of the 0.8 keV component. While the scatter is large, the emission measures tend to be higher toward the lower Galactic latitude. We discuss possible biases caused by the solar wind charge exchange, stars, and background groups. The 0.8 keV component is probably heated by supernovae in the Milky Way disk, possibly related to galactic fountains.

astro-ph.GA↗

arXiv2023

Focal Surface Projection: Extending Projector Depth-of-Field Using a Phase-Only Spatial Light Modulator

We present a focal surface projection to solve the narrow depth-of-field problem in projection mapping applications. We apply a phase-only spatial light modulator to realize nonuniform focusing distances, whereby the projected contents appear focused on a surface with considerable depth variations. The feasibility of the proposed technique was validated through a physical experiment.

physics.optics↗

arXiv2023

Line Emission Mapper (LEM): Probing the physics of cosmic ecosystems

The Line Emission Mapper (LEM) is an X-ray Probe for the 2030s that will answer the outstanding questions of the Universe's structure formation. It will also provide transformative new observing capabilities for every area of astrophysics, and to heliophysics and planetary physics as well. LEM's main goal is a comprehensive look at the physics of galaxy formation, including stellar and black-hole feedback and flows of baryonic matter into and out of galaxies. These processes are best studied in X-rays, and emission-line mapping is the pressing need in this area. LEM will use a large microcalorimeter array/IFU, covering a 30x30' field with 10" angular resolution, to map the soft X-ray line emission from objects that constitute galactic ecosystems. These include supernova remnants, star-forming regions, superbubbles, galactic outflows (such as the Fermi/eROSITA bubbles in the Milky Way and their analogs in other galaxies), the Circumgalactic Medium in the Milky Way and other galaxies, and the Intergalactic Medium at the outskirts and beyond the confines of galaxies and clusters. LEM's 1-2 eV spectral resolution in the 0.2-2 keV band will make it possible to disentangle the faintest emission lines in those objects from the bright Milky Way foreground, providing groundbreaking measurements of the physics of these plasmas, from temperatures, densities, chemical composition to gas dynamics. While LEM's main focus is on galaxy formation, it will provide transformative capability for all classes of astrophysical objects, from the Earth's magnetosphere, planets and comets to the interstellar medium and X-ray binaries in nearby galaxies, AGN, and cooling gas in galaxy clusters. In addition to pointed observations, LEM will perform a shallow all-sky survey that will dramatically expand the discovery space.

astro-ph.IM↗

arXiv2023

NSTO: Neural Synthesizing Topology Optimization for Modulated Structure Generation

Nature evolves structures like honeycombs at optimized performance with limited material. These efficient structures can be artificially created with the collaboration of structural topology optimization and additive manufacturing. However, the extensive computation cost of topology optimization causes low mesh resolution, long solving time, and rough boundaries that fail to match the requirements for meeting the growing personal fabrication demands and printing capability. Therefore, we propose the neural synthesizing topology optimization that leverages a self-supervised coordinate-based network to optimize structures with significantly shorter computation time, where the network encodes the structural material layout as an implicit function of coordinates. Continuous solution space is further generated from optimization tasks under varying boundary conditions or constraints for users' instant inference of novel solutions. We demonstrate the system's efficacy for a broad usage scenario through numerical experiments and 3D printing.

cs.CE↗

arXiv2023

Hitomi/XRISM micro-calorimeter

We present an overview of the ASTRO-H (Hitomi) Soft X-Ray Spectrometer (SXS) and the X-Ray Imaging and Spectrometer Mission (XRISM) {\it Resolve} spectrometer. In each, a 36-pixel X-ray micro-calorimeter array operated at 50 mK covers a $3 \times 3$ arc-minute field of view. The instruments are designed to achieve an energy resolution of better than 7 eV over the 0.3 -- 12 keV energy range and operate for more than 3 years in orbit. Actually, the SXS achieved the energy resolution of $\sim$5 eV in orbit, but it was lost after only a month of operation due to the loss of spacecraft attitude control. For the recovery mission, XRISM will be equipped with the {\it Resolve} spectrometer which has mostly the same design as SXS and is expected to have the same in-flight performance.

astro-ph.IM↗