arXiv subjects

Kourosh Darvish

Publications and source records attributed to Kourosh Darvish.

At least 19 recordsLinked to original sources

arXiv2026

Dynamic Execution Horizon Prediction for Chunk-based Robot Policies

Action chunking has become a standard design in modern robot policies, from diffusion/flow policies to vision-language-action models, where the policy predicts a sequence of actions and executes a fixed number of them instead of acting one step at a time. However, this paradigm relies on a key assumption: a fixed execution horizon. During chunk execution, the policy operates open-loop, which is particularly problematic for fine-grained manipulation tasks that require frequent replanning. In practice, the execution horizon is typically chosen through empirical tuning and is highly task-dependent. To this end, we propose Dynamic Execution Horizon Prediction (DEHP), an effective method that trains a lightweight execution-horizon prediction branch using online reinforcement learning while keeping the pretrained chunk policy completely frozen. This makes the method compatible with black-box chunk policies and isolates the effect of adapting the execution horizon from changes to the underlying action generator. Across our evaluations, DEHP improves the success rate of different high-precision and long-horizon manipulation tasks by a large margin. Our qualitative analysis further shows that DEHP predicts shorter execution horizons during fine-grained stages of the task and longer horizons during free-space motion. In this way, DEHP balances the efficiency of open-loop chunk execution with the reactivity of closed-loop single-step control. Project page: https://dehp-chunking.github.io/

cs.RO↗

arXiv2026

MATTERIX: toward a digital twin for robotics-assisted chemistry laboratory automation

Accelerated materials discovery is critical for addressing global challenges. However, developing new laboratory workflows relies heavily on real-world experimental trials, and this can hinder scalability because of the need for numerous physical make-and-test iterations. Here we present MATTERIX, a multiscale, graphics processing unit-accelerated robotic simulation framework designed to create high-fidelity digital twins of chemistry laboratories, thus accelerating workflow development. This multiscale digital twin simulates robotic physical manipulation, powder and liquid dynamics, device functionalities, heat transfer and basic chemical reaction kinetics. This is enabled by integrating realistic physics simulation and photorealistic rendering with a modular graphics processing unit-accelerated semantics engine, which models logical states and continuous behaviors to simulate chemistry workflows across different levels of abstraction. MATTERIX streamlines the creation of digital twin environments through open-source asset libraries and interfaces, while enabling flexible workflow design via hierarchical plan definition and a modular skill library that incorporates learning-based methods. Our approach demonstrates sim-to-real transfer in robotic chemistry setups, reducing reliance on costly real-world experiments and enabling the testing of hypothetical automated workflows in silico. The project website is available at https://accelerationconsortium.github.io/Matterix/ .

cs.RO↗

arXiv2025

AnyPlace: Learning Generalized Object Placement for Robot Manipulation

Object placement in robotic tasks is inherently challenging due to the diversity of object geometries and placement configurations. To address this, we propose AnyPlace, a two-stage method trained entirely on synthetic data, capable of predicting a wide range of feasible placement poses for real-world tasks. Our key insight is that by leveraging a Vision-Language Model (VLM) to identify rough placement locations, we focus only on the relevant regions for local placement, which enables us to train the low-level placement-pose-prediction model to capture diverse placements efficiently. For training, we generate a fully synthetic dataset of randomly generated objects in different placement configurations (insertion, stacking, hanging) and train local placement-prediction models. We conduct extensive evaluations in simulation, demonstrating that our method outperforms baselines in terms of success rate, coverage of possible placement modes, and precision. In real-world experiments, we show how our approach directly transfers models trained purely on synthetic data to the real world, where it successfully performs placements in scenarios where other models struggle -- such as with varying object geometries, diverse placement modes, and achieving high precision for fine placement. More at: https://any-place.github.io.

cs.RO↗

arXiv2025

RoboCulture: A Robotics Platform for Automated Biological Experimentation

Automating biological experimentation remains challenging due to the need for millimeter-scale precision, long and multi-step experiments, and the dynamic nature of living systems. Current liquid handlers only partially automate workflows, requiring human intervention for plate loading, tip replacement, and calibration. Industrial solutions offer more automation but are costly and lack the flexibility needed in research settings. Meanwhile, research in autonomous robotics has yet to bridge the gap for long-duration, failure-sensitive biological experiments. We introduce RoboCulture, a cost-effective and flexible platform that uses a general-purpose robotic manipulator to automate key biological tasks. RoboCulture performs liquid handling, interacts with lab equipment, and leverages computer vision for real-time decisions using optical density-based growth monitoring. We demonstrate a fully autonomous 15-hour yeast culture experiment where RoboCulture uses vision and force feedback and a modular behavior tree framework to robustly execute, monitor, and manage experiments. Video demonstrations of RoboCulture can be found at https://ac-rad.github.io/roboculture.

cs.RO↗

arXiv2025

Accelerating Discovery in Natural Science Laboratories with AI and Robotics: Perspectives and Challenges from the 2024 IEEE ICRA Workshop, Yokohama, Japan

Science laboratory automation enables accelerated discovery in life sciences and materials. However, it requires interdisciplinary collaboration to address challenges such as robust and flexible autonomy, reproducibility, throughput, standardization, the role of human scientists, and ethics. This article highlights these issues, reflecting perspectives from leading experts in laboratory automation across different disciplines of the natural sciences.

cs.RO↗

arXiv2025

ORGANA: A Robotic Assistant for Automated Chemistry Experimentation and Characterization

Chemistry experiments can be resource- and labor-intensive, often requiring manual tasks like polishing electrodes in electrochemistry. Traditional lab automation infrastructure faces challenges adapting to new experiments. To address this, we introduce ORGANA, an assistive robotic system that automates diverse chemistry experiments using decision-making and perception tools. It makes decisions with chemists in the loop to control robots and lab devices. ORGANA interacts with chemists using Large Language Models (LLMs) to derive experiment goals, handle disambiguation, and provide experiment logs. ORGANA plans and executes complex tasks with visual feedback, while supporting scheduling and parallel task execution. We demonstrate ORGANA's capabilities in solubility, pH measurement, recrystallization, and electrochemistry experiments. In electrochemistry, it executes a 19-step plan in parallel to characterize quinone derivatives for flow batteries. Our user study shows ORGANA reduces frustration and physical demand by over 50%, with users saving an average of 80.3% of their time when using it.

cs.RO↗

arXiv2024

RePLan: Robotic Replanning with Perception and Language Models

Advancements in large language models (LLMs) have demonstrated their potential in facilitating high-level reasoning, logical reasoning and robotics planning. Recently, LLMs have also been able to generate reward functions for low-level robot actions, effectively bridging the interface between high-level planning and low-level robot control. However, the challenge remains that even with syntactically correct plans, robots can still fail to achieve their intended goals due to imperfect plans or unexpected environmental issues. To overcome this, Vision Language Models (VLMs) have shown remarkable success in tasks such as visual question answering. Leveraging the capabilities of VLMs, we present a novel framework called Robotic Replanning with Perception and Language Models (RePLan) that enables online replanning capabilities for long-horizon tasks. This framework utilizes the physical grounding provided by a VLM's understanding of the world's state to adapt robot actions when the initial plan fails to achieve the desired goal. We developed a Reasoning and Control (RC) benchmark with eight long-horizon tasks to test our approach. We find that RePLan enables a robot to successfully adapt to unforeseen obstacles while accomplishing open-ended, long-horizon goals, where baseline models cannot, and can be readily applied to real robots. Find more information at https://replan-lm.github.io/replan.github.io/

cs.RO↗

arXiv2024

iCub3 Avatar System: Enabling Remote Fully-Immersive Embodiment of Humanoid Robots

We present an avatar system designed to facilitate the embodiment of humanoid robots by human operators, validated through iCub3, a humanoid developed at the Istituto Italiano di Tecnologia (IIT). More precisely, the contribution of the paper is twofold: first, we present the humanoid iCub3 as a robotic avatar which integrates the latest significant improvements after about fifteen years of development of the iCub series; second, we present a versatile avatar system enabling humans to embody humanoid robots encompassing aspects such as locomotion, manipulation, voice, and face expressions with comprehensive sensory feedback including visual, auditory, haptic, weight, and touch modalities. We validate the system by implementing several avatar architecture instances, each tailored to specific requirements. First, we evaluated the optimized architecture for verbal, non-verbal, and physical interactions with a remote recipient. This testing involved the operator in Genoa and the avatar in the Biennale di Venezia, Venice - about 290 Km away - thus allowing the operator to visit remotely the Italian art exhibition. Second, we evaluated the optimised architecture for recipient physical collaboration and public engagement on-stage, live, at the We Make Future show, a prominent world digital innovation festival. In this instance, the operator was situated in Genoa while the avatar operates in Rimini - about 300 Km away - interacting with a recipient who entrusted the avatar a payload to carry on stage before an audience of approximately 2000 spectators. Third, we present the architecture implemented by the iCub Team for the ANA Avatar XPrize competition.

cs.RO↗

arXiv2023

Online Action Recognition for Human Risk Prediction with Anticipated Haptic Alert via Wearables

This paper proposes a framework that combines online human state estimation, action recognition and motion prediction to enable early assessment and prevention of worker biomechanical risk during lifting tasks. The framework leverages the NIOSH index to perform online risk assessment, thus fitting real-time applications. In particular, the human state is retrieved via inverse kinematics/dynamics algorithms from wearable sensor data. Human action recognition and motion prediction are achieved by implementing an LSTM-based Guided Mixture of Experts architecture, which is trained offline and inferred online. With the recognized actions, a single lifting activity is divided into a series of continuous movements and the Revised NIOSH Lifting Equation can be applied for risk assessment. Moreover, the predicted motions enable anticipation of future risks. A haptic actuator, embedded in the wearable system, can alert the subject of potential risk, acting as an active prevention device. The performance of the proposed framework is validated by executing real lifting tasks, while the subject is equipped with the iFeel wearable system.

eess.SP↗

arXiv2023

Chemistry Lab Automation via Constrained Task and Motion Planning

Chemists need to perform many laborious and time-consuming experiments in the lab to discover and understand the properties of new materials. To support and accelerate this process, we propose a robot framework for manipulation that autonomously performs chemistry experiments. Our framework receives high-level abstract descriptions of chemistry experiments, perceives the lab workspace, and autonomously plans multi-step actions and motions. The robot interacts with a wide range of lab equipment and executes the generated plans. A key component of our method is constrained task and motion planning using PDDLStream solvers. Preventing collisions and spillage is done by introducing a constrained motion planner. Our planning framework can conduct different experiments employing implemented actions and lab tools. We demonstrate the utility of our framework on pouring skills for various materials and two fundamental chemical experiments for materials synthesis: solubility and recrystallization.

cs.RO↗

arXiv2023

Errors are Useful Prompts: Instruction Guided Task Programming with Verifier-Assisted Iterative Prompting

Generating low-level robot task plans from high-level natural language instructions remains a challenging problem. Although large language models have shown promising results in generating plans, the accuracy of the output remains unverified. Furthermore, the lack of domain-specific language data poses a limitation on the applicability of these models. In this paper, we propose CLAIRIFY, a novel approach that combines automatic iterative prompting with program verification to ensure programs written in data-scarce domain-specific language are syntactically valid and incorporate environment constraints. Our approach provides effective guidance to the language model on generating structured-like task plans by incorporating any errors as feedback, while the verifier ensures the syntactic accuracy of the generated plans. We demonstrate the effectiveness of CLAIRIFY in planning chemistry experiments by achieving state-of-the-art results. We also show that the generated plans can be executed on a real robot by integrating them with a task and motion planner.

cs.RO↗

arXiv2023

Simultaneous Action Recognition and Human Whole-Body Motion and Dynamics Prediction from Wearable Sensors

This paper presents a novel approach to solve simultaneously the problems of human activity recognition and whole-body motion and dynamics prediction for real-time applications. Starting from the dynamics of human motion and motor system theory, the notion of mixture of experts from deep learning has been extended to address this problem. In the proposed approach, experts are modelled as a sequence-to-sequence recurrent neural networks (RNN) architecture. Experiments show the results of 66-DoF real-world human motion prediction and action recognition during different tasks like walking and rotating. The code associated with this paper is available at: \url{github.com/ami-iit/paper_darvish_2022_humanoids_action-kindyn-predicition}

cs.RO↗

arXiv2023

Teleoperation of Humanoid Robots: A Survey

Teleoperation of humanoid robots enables the integration of the cognitive skills and domain expertise of humans with the physical capabilities of humanoid robots. The operational versatility of humanoid robots makes them the ideal platform for a wide range of applications when teleoperating in a remote environment. However, the complexity of humanoid robots imposes challenges for teleoperation, particularly in unstructured dynamic environments with limited communication. Many advancements have been achieved in the last decades in this area, but a comprehensive overview is still missing. This survey paper gives an extensive overview of humanoid robot teleoperation, presenting the general architecture of a teleoperation system and analyzing the different components. We also discuss different aspects of the topic, including technological and methodological advances, as well as potential applications. A web-based version of the paper can be found at https://humanoid-teleoperation.github.io/.

cs.RO↗

arXiv2020

A Task Allocation Approach for Human-Robot Collaboration in Product Defects Inspection Scenarios

The presence and coexistence of human operators and collaborative robots in shop-floor environments raises the need for assigning tasks to either operators or robots, or both. Depending on task characteristics, operator capabilities and the involved robot functionalities, it is of the utmost importance to design strategies allowing for the concurrent and/or sequential allocation of tasks related to object manipulation and assembly. In this paper, we extend the \textsc{FlexHRC} framework presented in \cite{darvish2018flexible} to allow a human operator to interact with multiple, heterogeneous robots at the same time in order to jointly carry out a given task. The extended \textsc{FlexHRC} framework leverages a concurrent and sequential task representation framework to allocate tasks to either operators or robots as part of a dynamic collaboration process. In particular, we focus on a use case related to the inspection of product defects, which involves a human operator, a dual-arm Baxter manipulator from Rethink Robotics and a Kuka youBot mobile manipulator.

cs.RO↗

arXiv2020

A Hierarchical Architecture for Human-Robot Cooperation Processes

In this paper we propose FlexHRC+, a hierarchical human-robot cooperation architecture designed to provide collaborative robots with an extended degree of autonomy when supporting human operators in high-variability shop-floor tasks. The architecture encompasses three levels, namely for perception, representation, and action. Building up on previous work, here we focus on (i) an in-the-loop decision making process for the operations of collaborative robots coping with the variability of actions carried out by human operators, and (ii) the representation level, integrating a hierarchical AND/OR graph whose online behaviour is formally specified using First Order Logic. The architecture is accompanied by experiments including collaborative furniture assembly and object positioning tasks.

cs.RO↗

arXiv2020

Deployment and Evaluation of a Flexible Human-Robot Collaboration Model Based on AND/OR Graphs in a Manufacturing Environment

The Industry 4.0 paradigm promises shorter development times, increased ergonomy, higher flexibility, and resource efficiency in manufacturing environments. Collaborative robots are an important tangible technology for implementing such a paradigm. A major bottleneck to effectively deploy collaborative robots to manufacturing industries is developing task planning algorithms that enable them to recognize and naturally adapt to varying and even unpredictable human actions while simultaneously ensuring an overall efficiency in terms of production cycle time. In this context, an architecture encompassing task representation, task planning, sensing, and robot control has been designed, developed and evaluated in a real industrial environment. A pick-and-place palletization task, which requires the collaboration between humans and robots, is investigated. The architecture uses AND/OR graphs for representing and reasoning upon human-robot collaboration models online. Furthermore, objective measures of the overall computational performance and subjective measures of naturalness in human-robot collaboration have been evaluated by performing experiments with production-line operators. The results of this user study demonstrate how human-robot collaboration models like the one we propose can leverage the flexibility and the comfort of operators in the workplace. In this regard, an extensive comparison study among recent models has been carried out.

cs.RO↗

arXiv2020

Model-Based Real-Time Motion Tracking using Dynamical Inverse Kinematics on SO(3)

This paper contributes towards the development of motion tracking algorithms for time-critical applications, proposing an infrastructure for solving dynamically the inverse kinematics of highly articulate systems such as humans. We present a method based on the integration of differential kinematics using distance measurement on SO(3) for which the convergence is proved using Lyapunov analysis. An experimental scenario, where the motion of a human subject is tracked in static and dynamic configurations, is used to validate the inverse kinematics method performance on human and humanoid models. Moreover, the method is tested on a human-humanoid retargeting scenario, verifying the usability of the computed solution for real-time robotics applications. Our approach is evaluated both in terms of accuracy and computational load, and compared to iterative optimization algorithms.

eess.SY↗

arXiv2020

Recent Advances in Human-Robot Collaboration Towards Joint Action

Robots existed as separate entities till now, but the horizons of a symbiotic human-robot partnership are impending. Despite all the recent technical advances in terms of hardware, robots are still not endowed with desirable relational skills that ensure a social component in their existence. This article draws from our experience as roboticists in Human-Robot Collaboration (HRC) with humanoid robots and presents some of the recent advances made towards realizing intuitive robot behaviors and partner-aware control involving physical interactions.

cs.RO↗