arXiv subjects

Krishan Kumar Tiwari

Publications and source records attributed to Krishan Kumar Tiwari.

9 recordsLinked to original sources

arXiv2026

Codebook Design and Baseband Precoding for Pragmatic Array-Fed RIS Hybrid Multiuser MIMO

In our previous work [2], we introduced a hardware- and power-efficient architecture for hybrid digital-analog (HDA) multiuser MIMO (MU-MIMO) based on stacking identical basic modules. Each module consists of a small active multi-antenna feeder (AMAF) placed in the near field of a larger reflective intelligent surface (RIS). Each AMAF is driven by one RF chain and conveys one spatial stream, achieving a multiplexing gain of $K$ with $K$ stacked modules. While [2] focused on module design and efficiency compared to active arrays, performance was evaluated only under pure line-of-sight (LOS) conditions. This work extends our approach in several ways. First, we propose a simple, pragmatic method for designing phase-only flat-top beams for the AMAF-RIS module, enabling wide angular coverage with low ripple and sidelobes. This design supports hierarchical beamforming codebooks for efficient beam acquisition. Second, we evaluate MU-MIMO performance under realistic mmWave multipath channels including both LOS and non-LOS (NLOS) components modeled using a 3D von Mises-Fisher distribution. We propose a low-complexity HDA MU-MIMO framework with: user-beam association via standard beam acquisition; dynamic user grouping (one user per beam); effective baseband MIMO channel estimation using 3GPP-compliant pilots; and downlink transmission with zero-forcing precoding under per-antenna power constraints. Results show high spectral efficiency and multiplexing gain while preserving hardware simplicity and power efficiency. Crucially, the approach is fully compliant with 3GPP 5GNR beam acquisition and sounding reference signaling mechanisms.

eess.SP↗

arXiv2026

Artificial Magnetic Conductor Frame to Improve Impedance Matching and Radiation Symmetry in 2$\times$2 Array for 6G Applications

An Artificial Magnetic Conductor (AMC) frame capable of improving the impedance matching of a 2$\times$2 array for 6G applications without degrading isolation performance is presented. The proposed frame is integrated into the array without modifying the single radiating element design. By relying on accurate full-wave simulations, it results that the addition of the frame restores the impedance matching performance, achieving a bandwidth of 1.5 GHz at 28 GHz. The isolation between each port remains under -15 dB within the operating band, thanks to the vias in the rectangular patch metasurface. Moreover, the overall structure exhibits a gain of 11.81 dBi with an aperture efficiency of 69$\%$, satisfactorily for broadband communication purposes. The proposed AMC frame represents an effective method for improving array performance without the need to alter the shape or dimensions of the single radiating element.

eess.SY↗

arXiv2025

Array-Fed RIS: Validation of Friis-Based Modeling Using Full-Wave Simulations

Space-fed large antenna arrays offer superior efficiency, simplicity, and reductions in size, weight, power, and cost (SWaP-C) compared to constrained-feed systems. Historically, horn antennas have been used for space feeding, but they suffer from limitations such as bulky designs, low aperture efficiency ($\approx 50\%$), and restricted degrees of freedom at the continuous aperture. In contrast, planar patch arrays achieve significantly higher aperture efficiency ($>90\%$) due to their more uniform aperture distribution, reduced weight, and increased degrees of freedom from the discretized aperture. Building on these advantages, we proposed an array-fed Reflective Intelligent Surface (RIS) system, where an active multi-antenna feeder (AMAF) optimizes power transfer by aligning with the principal eigenmode of the AMAF-RIS propagation matrix $\mathbf{T}$. While our previous studies relied on the Friis transmission formula for system modeling, we now validate this approach through full-wave simulations in CST Microwave Studio. By comparing the Friis-based matrix, $\mathbf{T}_{\rm Friis}$, with the full-wave solution, $\mathbf{T}_{\rm full. wave}$, we validate the relevance of the Friis-based modeling for top-level system design. Our findings confirm the feasibility of the proposed AMAF-RIS architecture for next-generation communication systems.

eess.SP↗

arXiv2025

Flat-Top Beamforming with Efficient Array-Fed RIS

Flat-top beam designs are essential for uniform power distribution over a wide angular sector for applications such as 5G/6G networks, beaconing, satellite communications, radar systems, etc. Low sidelobe levels with steep transitions allow negligible cross sector illumination. Active array designs requiring amplitude taper suffer from poor power amplifier utilization. Phase only designs, e.g., Zadoff-Chu or generalized step chirp polyphase sequence methods, often require large active antenna arrays which in turns increases the hardware complexity and reduces the energy efficiency. In our recently proposed novel array-fed reflective intelligent surface (RIS) architecture, the small ($2 \times 2$) active array has uniform (principal eigenmode) amplitude weighting. We now present a pragmatic flat-top pattern design method for practical array (RIS) sizes, which outperforms current state-of-the-art in terms of design superiority, energy efficiency, and deployment feasibility. This novel design holds promise for advancing sustainable wireless technologies in next-generation communication systems, including applications such as beaconing, broadcast signaling, and hierarchical beamforming, while mitigating the environmental impact of high-energy antenna arrays.

eess.SP↗

arXiv2024

A Modular Pragmatic Architecture for Multiuser MIMO with Array-Fed RIS

We propose a power- and hardware-efficient, pragmatic, modular, multiuser/multibeam array-fed RIS architecture particularly suited to operate in very high frequency bands (high mmWave and sub-THz), where channels are typically sparse in the beamspace and line-of-sight (LOS) is required to achieve an acceptable received signal level. The key module is an active multi-antenna feeder (AMAF) with a small number of active antennas placed in the near field of a RIS with a much larger number of passive controllable reflecting elements. We propose a pragmatic approach to obtain a steerable beam with high gain and very low sidelobes. Then, $K$ independently controlled beams can be achieved by stacking $K$ of such AMAF-RIS modules. Our analysis takes in full account: 1) the near-end crosstalk (NEXT) between the modules, 2) the far-end crosstalk (FEXT) due to the sidelobes; 3) a thorough energy efficiency comparison with respect to conventional active arrays with the same beamforming performance. Overall, we show that the proposed architecture is very attractive in terms of spectral efficiency, ease of implementation (hardware complexity), and energy efficiency.

eess.SP↗

arXiv2023

A New Old Idea: Beam-Steering Reflectarrays for Efficient Sub-THz Multiuser MIMO

We present a novel, power- & hardware-efficient, multiuser, multibeam RIS (Reflective Intelligent Surface) architecture for multiuser MIMO, especially for very high frequency bands (e.g., high mmWave and sub-THz), where channels are typically sparse in the beamspace and LOS is the dominant component. The key module is formed by an active multiantenna feeder (AMAF) with a small number of active antennas, placed in the near field of a RIS with a much larger number of passive controllable reflecting elements. We propose a pragmatic approach to obtain a steerable beam with high gain and very low sidelobes. Then K independently controlled beams can be achieved by closely stacking K such AMAF-RIS modules. Our analysis includes the mutual interference between the modules and the fact that, due to the delay difference of propagation through the AMAF-RIS structure, the resulting channel matrix is frequency selective even for pure LOS propagation. We consider a 3D geometry and show that "beam focusing" is in fact possible (and much more effective in terms of coverage) also in the far-field, by creating spotbeams with limited footprint both in angle and in range. Our results show that: 1) simple RF beamforming (BF) without computationally expensive baseband multiuser precoding is sufficient to practically eliminate multiuser interference when the users are chosen with sufficient angular/range separation, thanks to the extremely low sidelobe beams; 2) the impact of beam pointing errors with standard deviation as large as 2.5 deg and RIS quantized phase-shifters with quantization bits > 2 is essentially negligible; 3) The proposed architecture is more power efficient & much simpler from a hardware implementation viewpoint than standard active arrays with the same BF performance. We show also that the array gain of the proposed AMAF-RIS structure is linear with the RIS aperture.

eess.SP↗

arXiv2023

Power Transfer between Two Antenna Arrays in the Near Field

We present numerical results with a focus on power transfer between two standard linear antenna arrays placed in the near field, where a much smaller active multi-antenna feeder (AMAF) space feeds a far larger passive array referred to as a reflective intelligent surface (RIS). The interest is in the regime of focal length to diameter ratio ($F/D$) less than unity. We address the question of center feed vs. end feed for array fed array antenna architectures and present the following novel findings and contributions: 1. In the regime of $F/D$ ratio less than one, the AMAF-RIS power transfer deviates from the classical inverse square law. Furthermore, the behavior of the power transmission coefficient is more sensitive to the $F/D$ ratio than to a particular RIS size. 2. For an end feed, non-eigenmodes provide better beam shapes than the eigenmodes, which are still inferior to beam shapes from the center feed eigenmodes. 3. The center feed provides more power gain than an end feed. This clearly illustrates that the center feed configuration should be used for array fed arrays, in contrast to the classical parabolic geometry.

eess.SP↗

arXiv2019

Beam Entropy of 5G Cellular Millimetre-Wave Channels

In this paper, we obtain and study typical beam entropy values for millimetre wave (mm-wave) channel models using the NYUSIM simulator for frequencies up to 100 GHz for fifth generation (5G) and beyond 5G cellular communication systems. The beam entropy is used to quantify sparse MIMO channel randomness in beamspace. Lower relative beam entropy channels are suitable for memory-assisted statistically-ranked (MarS) and hybrid radio frequency (RF) beam training algorithms. High beam entropies can potentially be advantageous for low overhead secured radio communications by generating cryptographic keys based on channel randomness in beamspace, especially for sparse multiple input multiple output (MIMO) channels. Urban micro (UMi), urban macro (UMa) and rural macro (RMa) cellular scenarios have been investigated in this work for 28, 60, 73 and 100 GHz.

eess.SP↗

arXiv2019

Monopulse-based THz Beam Tracking for Indoor Virtual Reality Applications

Terahertz spectrum is being researched upon to provide ultra-high throughput radio links for indoor applications, e.g., virtual reality (VR), etc. as well as outdoor applications, e.g., backhaul links, etc. This paper investigates a monopulse-based beam tracking approach for limited mobility users relying on sparse massive multiple input multiple output (MIMO) wireless channels. Owing to the sparsity, beamforming is realized using digitally-controlled radio frequency (RF) / intermediate-frequency (IF) phase shifters with constant amplitude constraint for transmit power compliance. A monopulse-based beam tracking technique, using received signal strength indi-cation (RSSI) is adopted to avoid feedback overheads for obvious reasons of efficacy and resource savings. The Matlab implementation of the beam tracking algorithm is also reported. This Matlab implementation has been kept as general purpose as possible using functions wherein the channel, beamforming codebooks, monopulse comparator, etc. can easily be updated for specific requirements and with minimum code amendments.

eess.SP↗