arXiv subjects

Krysta M. Svore

Publications and source records attributed to Krysta M. Svore.

At least 19 recordsLinked to original sources

arXiv2026

CUDA-Q Logical: Retargetable Compilation for Fault-Tolerant Quantum Computing

Realizing fault-tolerant quantum computing requires mapping logical programs to heterogeneous quantum error correction (QEC) codes and diverse fault-tolerant execution models, scheduling physical resources, and coupling to real-time classical control and feedback. Specialized tools exist for each step but rely on manual composition and translation that discard assumptions and provenance, separating resource estimates from the compiler artifacts they describe, and making it difficult to validate correctness, compare architectures, or attribute costs to specific design choices. We present CUDA-Q Logical, an extensible compiler infrastructure for retargetable fault-tolerant compilation, analysis, and execution. Interoperable with CUDA-Q and other mainstream front-ends, CUDA-Q Logical progressively lowers target-independent logical programs through a constrained logical virtual machine, QEC microcode, physical gate schedules, and real-time control plans, with each layer preserving semantics and provenance, while verifying composition and resource constraints. By deriving every resource estimate directly from compiler artifacts, the framework unifies compilation and resource analysis, enabling successively refined estimates and principled cross-architecture comparison while permitting QEC codes, execution models, decoders, and hardware architectures to be introduced as modular extensions. Across workloads ranging from application-architecture studies to qLDPC surgery and detector-error-model composition, we show that schedule-derived estimates reconcile with established independent models. Crucially, this compiler-visible structure exposes cost drivers hidden by aggregate analytical formulas, carries QEC artifacts intact into simulation, and demonstrates a complete compilation pipeline for fault-tolerant quantum computing.

quant-ph↗

arXiv2025

A Topologically Fault-Tolerant Quantum Computer with Four Dimensional Geometric Codes

Topological quantum codes are intrinsically fault-tolerant to local noise, and underlie the theory of topological phases of matter. We explore geometry to enhance the performance of topological quantum codes by rotating the four dimensional self-correcting quantum memory, and present codes targeted to both near-term and utility-scale quantum computers. We identify a full set of logical Clifford operations and with it design a universal fault-tolerant quantum architecture. Our design achieves single-shot error correction, significant reductions in required qubits, and low-depth logical operations. In turn, our proposed architecture relaxes the requirements for achieving fault tolerance and offers an efficient path for realization in several near-term quantum hardware implementations. Our [[96,6,8]] 4D Hadamard lattice code has low weight-6 stabilizers and depth-8 syndrome extraction circuits, a high pseudo-threshold of $\sim 0.01$, and a logical error rate of $\sim 10^{-6}$ per logical qubit per round of error correction at $10^{-3}$ physical error rate under a standard circuit-level noise model. A Clifford-complete logical gate set is presented, including a constructive and efficient method for Clifford gate synthesis.

quant-ph↗

arXiv2025

Fault-tolerant quantum computation with a neutral atom processor

Quantum computing experiments are transitioning from running on physical qubits to using encoded, logical qubits. Fault-tolerant computation can identify and correct errors, and has the potential to enable the dramatically reduced logical error rates required for valuable algorithms. However, it requires flexible control of high-fidelity operations performed on large numbers of qubits. We demonstrate fault-tolerant quantum computation on a quantum processor with 256 qubits, each an individual neutral Ytterbium atom. The operations are designed so that key error sources convert to atom loss, which can be detected by imaging. Full connectivity is enabled by atom movement. We demonstrate the entanglement of 24 logical qubits encoded into 48 atoms, at once catching errors and correcting for, on average 1.8, lost atoms. We also implement the Bernstein-Vazirani algorithm with up to 28 logical qubits encoded into 112 atoms, showing better-than-physical error rates. In both cases, "erasure conversion," changing errors into a form that can be detected independently from qubit state, improves circuit performance. These results begin to clear a path for achieving scientific quantum advantage with a programmable neutral atom quantum processor.

quant-ph↗

arXiv2024

Demonstration of quantum computation and error correction with a tesseract code

A critical milestone for quantum computers is to demonstrate fault-tolerant computation that outperforms computation on physical qubits. The tesseract subsystem color code protects four logical qubits in 16 physical qubits, to distance four. Using the tesseract code on Quantinuum's trapped-ion quantum computers, we prepare high-fidelity encoded graph states on up to 12 logical qubits, beneficially combining for the first time fault-tolerant error correction and computation. We also protect encoded states through up to five rounds of error correction. Using performant quantum software and hardware together allows moderate-depth logical quantum circuits to have an order of magnitude less error than the equivalent unencoded circuits.

quant-ph↗

arXiv2023

How to choose a decoder for a fault-tolerant quantum computer? The speed vs accuracy trade-off

Achieving practical quantum advantage requires a classical decoding algorithm to identify and correct faults during computation. This classical decoding algorithm must deliver both accuracy and speed, but in what combination? When is a decoder "fast enough" or "accurate enough"? In the case of surface codes, tens of decoding algorithms have been proposed, with different accuracies and speeds. However, it has been unclear how to choose the best decoder for a given quantum architecture. Should a faster decoder be used at the price of reduced accuracy? Or should a decoder sacrifice accuracy to fit within a given time constraint? If a decoder is too slow, it may be stopped upon reaching a time bound, at the price of some time-out failures and an increased failure rate. What then is the optimal stopping time of the decoder? By analyzing the speed vs. accuracy tradeoff, we propose strategies to select the optimal stopping time for a decoder for different tasks. We design a protocol to select the decoder that minimizes the spacetime cost per logical gate, for logical computation of a given depth. Our protocol enables comparison of different decoders, and the selection of an appropriate decoder for a given fault-tolerant quantum computing architecture. We illustrate our protocol for the surface code equipped with a desktop implementation of the PyMatching decoder. We estimate PyMatching is fast enough to implement thousands of logical gates with a better accuracy than physical qubits. However, we find it is not sufficiently fast to reach 10^5 logical gates, under certain assumptions, due to the decoding delay which forces qubits to idle and accumulate errors while idling. We expect further improvements to PyMatching are possible by running it on a better machine or by reducing the OS interference.

quant-ph↗

arXiv2022

Assessing requirements to scale to practical quantum advantage

While quantum computers promise to solve some scientifically and commercially valuable problems thought intractable for classical machines, delivering on this promise will require a large-scale quantum machine. Understanding the impact of architecture design choices for a scaled quantum stack for specific applications, prior to full realization of the quantum system, is an important open challenge. To this end, we develop a framework for quantum resource estimation, abstracting the layers of the stack, to estimate resources required across these layers for large-scale quantum applications. Using a tool that implements this framework, we assess three scaled quantum applications and find that hundreds of thousands to millions of physical qubits are needed to achieve practical quantum advantage. We identify three qubit parameters, namely size, speed, and controllability, that are critical at scale to rendering these applications practical. A goal of our work is to accelerate progress towards practical quantum advantage by enabling the broader community to explore design choices across the stack, from algorithms to qubits.

quant-ph↗

arXiv2021

The cost of universality: A comparative study of the overhead of state distillation and code switching with color codes

Estimating and reducing the overhead of fault tolerance (FT) schemes is a crucial step toward realizing scalable quantum computers. Of particular interest are schemes based on two-dimensional (2D) topological codes such as the surface and color codes which have high thresholds but lack a natural implementation of a non-Clifford gate. In this work, we directly compare two leading FT implementations of the T gate in 2D color codes under circuit noise across a wide range of parameters in regimes of practical interest. We report that implementing the T gate via code switching to a 3D color code does not offer substantial savings over state distillation in terms of either space or space-time overhead. We find a circuit noise threshold of 0.07(1)% for the T gate via code switching, almost an order of magnitude below that achievable by state distillation in the same setting. To arrive at these results, we provide and simulate an optimized code switching procedure, and bound the effect of various conceivable improvements. Many intermediate results in our analysis may be of independent interest. For example, we optimize the 2D color code for circuit noise yielding its largest threshold to date 0.37(1)%, and adapt and optimize the restriction decoder finding a threshold of 0.80(5)% for the 3D color code with perfect measurements under Z noise. Our work provides a much-needed direct comparison of the overhead of state distillation and code switching, and sheds light on the choice of future FT schemes and hardware designs.

quant-ph↗

arXiv2020

Teaching Quantum Computing through a Practical Software-driven Approach: Experience Report

Quantum computing harnesses quantum laws of nature to enable new types of algorithms, not efficiently possible on traditional computers, that may lead to breakthroughs in crucial areas like materials science and chemistry. There is rapidly growing demand for a quantum workforce educated in the basics of quantum computing, in particular in quantum programming. However, there are few offerings for non-specialists and little information on best practices for training computer science and engineering students. In this report we describe our experience teaching an undergraduate course on quantum computing using a practical, software-driven approach. We centered our course around teaching quantum algorithms through hands-on programming, reducing the significance of traditional written assignments and relying instead on self-paced programming exercises ("Quantum Katas"), a variety of programming assignments, and a final project. We observed that the programming sections of the course helped students internalize theoretical material presented during the lectures. In the survey results, students indicated that the programming exercises and the final project contributed the most to their learning process. We describe the motivation for centering the course around quantum programming, discuss major artifacts used in this course, and present our lessons learned and best practices for a future improved course offering. We hope that our experience will help guide instructors who want to adopt a practical approach to teaching quantum computing and will enable more undergraduate programs to offer quantum programming as an elective.

physics.ed-ph↗

arXiv2020

Predicting human-generated bitstreams using classical and quantum models

A school of thought contends that human decision making exhibits quantum-like logic. While it is not known whether the brain may indeed be driven by actual quantum mechanisms, some researchers suggest that the decision logic is phenomenologically non-classical. This paper develops and implements an empirical framework to explore this view. We emulate binary decision-making using low width, low depth, parameterized quantum circuits. Here, entanglement serves as a resource for pattern analysis in the context of a simple bit-prediction game. We evaluate a hybrid quantum-assisted machine learning strategy where quantum processing is used to detect correlations in the bitstreams while parameter updates and class inference are performed by classical post-processing of measurement results. Simulation results indicate that a family of two-qubit variational circuits is sufficient to achieve the same bit-prediction accuracy as the best traditional classical solution such as neural nets or logistic autoregression. Thus, short of establishing a provable "quantum advantage" in this simple scenario, we give evidence that the classical predictability analysis of a human-generated bitstream can be achieved by small quantum models.

quant-ph↗

arXiv2020

Beyond single-shot fault-tolerant quantum error correction

Extensive quantum error correction is necessary in order to perform a useful computation on a noisy quantum computer. Moreover, quantum error correction must be implemented based on imperfect parity check measurements that may return incorrect outcomes or inject additional faults into the qubits. To achieve fault-tolerant error correction, Shor proposed to repeat the sequence of parity check measurements until the same outcome is observed sufficiently many times. Then, one can use this information to perform error correction. A basic implementation of this fault tolerance strategy requires $Ω(r d^2)$ parity check measurements for a distance-d code defined by r parity checks. For some specific highly structured quantum codes, Bombin has shown that single-shot fault-tolerant quantum error correction is possible using only r measurements. In this work, we demonstrate that fault-tolerant quantum error correction can be achieved using $O(d \log(d))$ measurements for any code with distance $d \geq Ω(n^α)$ for some constant $α> 0$. Moreover, we prove the existence of a sub-single-shot fault-tolerant quantum error correction scheme using fewer than r measurements. In some cases, the number of parity check measurements required for fault-tolerant quantum error correction is exponentially smaller than the number of parity checks defining the code.

quant-ph↗

arXiv2019

Quantum SDP Solvers: Large Speed-ups, Optimality, and Applications to Quantum Learning

We give two quantum algorithms for solving semidefinite programs (SDPs) providing quantum speed-ups. We consider SDP instances with $m$ constraint matrices, each of dimension $n$, rank at most $r$, and sparsity $s$. The first algorithm assumes access to an oracle to the matrices at unit cost. We show that it has run time $\tilde{O}(s^2(\sqrt{m}ε^{-10}+\sqrt{n}ε^{-12}))$, with $ε$ the error of the solution. This gives an optimal dependence in terms of $m, n$ and quadratic improvement over previous quantum algorithms when $m\approx n$. The second algorithm assumes a fully quantum input model in which the matrices are given as quantum states. We show that its run time is $\tilde{O}(\sqrt{m}+\text{poly}(r))\cdot\text{poly}(\log m,\log n,B,ε^{-1})$, with $B$ an upper bound on the trace-norm of all input matrices. In particular the complexity depends only poly-logarithmically in $n$ and polynomially in $r$. We apply the second SDP solver to learn a good description of a quantum state with respect to a set of measurements: Given $m$ measurements and a supply of copies of an unknown state $ρ$ with rank at most $r$, we show we can find in time $\sqrt{m}\cdot\text{poly}(\log m,\log n,r,ε^{-1})$ a description of the state as a quantum circuit preparing a density matrix which has the same expectation values as $ρ$ on the $m$ measurements, up to error $ε$. The density matrix obtained is an approximation to the maximum entropy state consistent with the measurement data considered in Jaynes' principle from statistical mechanics. As in previous work, we obtain our algorithm by "quantizing" classical SDP solvers based on the matrix multiplicative weight method. One of our main technical contributions is a quantum Gibbs state sampler for low-rank Hamiltonians with a poly-logarithmic dependence on its dimension, which could be of independent interest.

quant-ph↗

arXiv2018

Managing approximation errors in quantum programs

We address the problem of distributing approximation errors in large-scale quantum programs. It has been known for some time that when compiling quantum algorithms for a fault-tolerant architecture, some operations must be approximated as they cannot be implemented with arbitrary accuracy by the underlying gate set. This leads to approximation errors which often can be grouped along subroutines that the given quantum algorithm is composed of. Typically, choices can be made as to how to distribute approximation errors so that the overall error is kept beneath a user- or application-defined threshold. These choices impact the resource footprint of the fault-tolerant implementation. We develop an automatic approximation error management module to tackle the resulting optimization problems. The module is based on annealing and can be integrated into any quantum software framework. Using the benchmark of simulating an Ising model with transverse field, we provide numerical results to quantify the benefits and trade-offs involved in our approach.

quant-ph↗

arXiv2018

Quantum circuits for floating-point arithmetic

Quantum algorithms to solve practical problems in quantum chemistry, materials science, and matrix inversion often involve a significant amount of arithmetic operations which act on a superposition of inputs. These have to be compiled to a set of fault-tolerant low-level operations and throughout this translation process, the compiler aims to come close to the Pareto-optimal front between the number of required qubits and the depth of the resulting circuit. In this paper, we provide quantum circuits for floating-point addition and multiplication which we find using two vastly different approaches. The first approach is to automatically generate circuits from classical Verilog implementations using synthesis tools and the second is to generate and optimize these circuits by hand. We compare our two approaches and provide evidence that floating-point arithmetic is a viable candidate for use in quantum computing, at least for typical scientific applications, where addition operations usually do not dominate the computation. All our circuits were constructed and tested using the software tools LIQ$Ui|\rangle{}$ and RevKit.

quant-ph↗

arXiv2018

Optimizing Quantum Circuits for Arithmetic

Many quantum algorithms make use of oracles which evaluate classical functions on a superposition of inputs. In order to facilitate implementation, testing, and resource estimation of such algorithms, we present quantum circuits for evaluating functions that are often encountered in the quantum algorithm literature. This includes Gaussians, hyperbolic tangent, sine/cosine, inverse square root, arcsine, and exponentials. We use insights from classical high-performance computing in order to optimize our circuits and implement a quantum software stack module which allows to automatically generate circuits for evaluating piecewise smooth functions in the computational basis. Our circuits enable more detailed cost analyses of various quantum algorithms, allowing to identify concrete applications of future quantum computing devices. Furthermore, our resource estimates may guide future research aiming to reduce the costs or even the need for arithmetic in the computational basis altogether.

quant-ph↗

arXiv2018

Q#: Enabling scalable quantum computing and development with a high-level domain-specific language

Quantum computing exploits quantum phenomena such as superposition and entanglement to realize a form of parallelism that is not available to traditional computing. It offers the potential of significant computational speed-ups in quantum chemistry, materials science, cryptography, and machine learning. The dominant approach to programming quantum computers is to provide an existing high-level language with libraries that allow for the expression of quantum programs. This approach can permit computations that are meaningless in a quantum context; prohibits succinct expression of interaction between classical and quantum logic; and does not provide important constructs that are required for quantum programming. We present Q#, a quantum-focused domain-specific language explicitly designed to correctly, clearly and completely express quantum algorithms. Q# provides a type system, a tightly constrained environment to safely interleave classical and quantum computations; specialized syntax, symbolic code manipulation to automatically generate correct transformations of quantum operations, and powerful functional constructs which aid composition.

quant-ph↗

arXiv2017

Quantum resource estimates for computing elliptic curve discrete logarithms

We give precise quantum resource estimates for Shor's algorithm to compute discrete logarithms on elliptic curves over prime fields. The estimates are derived from a simulation of a Toffoli gate network for controlled elliptic curve point addition, implemented within the framework of the quantum computing software tool suite LIQ$Ui|\rangle$. We determine circuit implementations for reversible modular arithmetic, including modular addition, multiplication and inversion, as well as reversible elliptic curve point addition. We conclude that elliptic curve discrete logarithms on an elliptic curve defined over an $n$-bit prime field can be computed on a quantum computer with at most $9n + 2\lceil\log_2(n)\rceil+10$ qubits using a quantum circuit of at most $448 n^3 \log_2(n) + 4090 n^3$ Toffoli gates. We are able to classically simulate the Toffoli networks corresponding to the controlled elliptic curve point addition as the core piece of Shor's algorithm for the NIST standard curves P-192, P-224, P-256, P-384 and P-521. Our approach allows gate-level comparisons to recent resource estimates for Shor's factoring algorithm. The results also support estimates given earlier by Proos and Zalka and indicate that, for current parameters at comparable classical security levels, the number of qubits required to tackle elliptic curves is less than for attacking RSA, suggesting that indeed ECC is an easier target than RSA.

quant-ph↗

arXiv2017

Three-dimensional color code thresholds via statistical-mechanical mapping

Three-dimensional (3D) color codes have advantages for fault-tolerant quantum computing, such as protected quantum gates with relatively low overhead and robustness against imperfect measurement of error syndromes. Here we investigate the storage threshold error rates for bit-flip and phase-flip noise in the 3D color code on the body-centererd cubic lattice, assuming perfect syndrome measurements. In particular, by exploiting a connection between error correction and statistical mechanics, we estimate the threshold for 1D string-like and 2D sheet-like logical operators to be $p^{(1)}_\mathrm{3DCC} \simeq 1.9\%$ and $p^{(2)}_\mathrm{3DCC} \simeq 27.6\%$. We obtain these results by using parallel tempering Monte Carlo simulations to study the disorder-temperature phase diagrams of two new 3D statistical-mechanical models: the 4- and 6-body random coupling Ising models.

quant-ph↗

arXiv2017

Factoring using 2n+2 qubits with Toffoli based modular multiplication

We describe an implementation of Shor's quantum algorithm to factor n-bit integers using only 2n+2 qubits. In contrast to previous space-optimized implementations, ours features a purely Toffoli based modular multiplication circuit. The circuit depth and the overall gate count are in O(n^3) and O(n^3 log(n)), respectively. We thus achieve the same space and time costs as Takahashi et al., while using a purely classical modular multiplication circuit. As a consequence, our approach evades most of the cost overheads originating from rotation synthesis and enables testing and localization of faults in both, the logical level circuit and an actual quantum hardware implementation. Our new (in-place) constant-adder, which is used to construct the modular multiplication circuit, uses only dirty ancilla qubits and features a circuit size and depth in O(n log(n)) and O(n), respectively.

quant-ph↗