arXiv subjects

Krzysztof T. Wojciechowski

Publications and source records attributed to Krzysztof T. Wojciechowski.

4 recordsLinked to original sources

arXiv2023

Discovery of the high thermoelectric performance in low-cost Cu8SiSxSe6-x argyrodites

Cu-based argyrodites have gained much attention as a new class of thermoelectric materials for energy harvesting. However, the phase transition occurring in these materials and low energy conversion performance limited their broad application in thermoelectric converters. In this work, we disclose a newly discovered highly efficient Cu8SiSxSe6-x argyrodite with stabilized high-symmetry cubic phase at above 282 K opening the practical potential of this material for the mid-temperature region applications. The temperature range broadening of the high-symmetry phase existence was possible due to the successful substitution of Se with S in Cu8SiSxSe6-x, which enhances the configurational entropy. The developed argyrodites show excellent thermoelectric performance thanks to the increased density of states effective mass and ultralow lattice thermal conductivity. Further tuning of the carrier concentration through the Cu-deviation improves the thermoelectric performance significantly. The dimensionless thermoelectric figure of merit ZT and estimated energy conversion efficiency η for Cu7.95SiS3Se3 achieve outstanding values of the 1.45 and 13 %, respectively, offering this argyrodite as a low-cost and Te-free alternative for the thermoelectric energy conversion applications.

cond-mat.mtrl-sci↗

arXiv2021

Effect of interface resistance on thermoelectric properties in (1-x)La$_{0.95}$Sr$_{0.05}$Co$_{0.95}$Mn$_{0.05}$O$_3$/(x)WC composite

In this study, the synergistic effect of the particle size of the dispersed phase and the interface thermal resistance (R$_{int}$) between the phases on the phonon thermal conductivity ($κ_{ph}$) of the (1-x)La$_{0.95}$Sr$_{0.05}$Co$_{0.95}$Mn$_{0.05}$O$_3$/(x)WC thermoelectric composite, is demonstrated. Further, the correlation between the R$_{int}$ and the Kapitza radius is discussed using the Bruggeman's asymmetrical model. In particular, the polycrystalline La$_{0.95}$Sr$_{0.05}$Co$_{0.95}$Mn$_{0.05}$O$_3$ sample is synthesized using a standard-solid state route. The presence of WC nanoparticle is confirmed from the electron microscopy images. Electrical conductivity ($σ$) increases, and the Seebeck coefficient ($α$) decreases with the increase in conducting WC volume fraction in the composite. The simultaneous increase in $σ$ and a decrease in $κ_{ph}$ with the WC volume fraction results in an increased figure of merit (zT) for (1-x)La$_{0.95}$Sr$_{0.05}$Co$_{0.95}$Mn$_{0.05}$O$_3$/(x)WC composite. A maximum zT $\sim$ 0.20 is obtained for (1-x)La$_{0.95}$Sr$_{0.05}$Co$_{0.95}$Mn$_{0.05}$O$_3$/(x)WC composite for x=0.010 at 463 K. The results obtained in the present study shows promise to design thermoelectric composites with desired phonon thermal conductivity considering the elastic properties between the phases.

cond-mat.mtrl-sci↗

arXiv2020

Thermal conductivity of PbTe-CoSb3 bulk polycrystalline composite: the role of microstructure and interface thermal resistance

Systematic experimental and theoretical research on the role of microstructure and interface thermal resistance on the thermal conductivity of the PbTe-CoSb3 bulk polycrystalline composite is presented. In particular, the correlation between the particle size of the dispersed phase and interface thermal resistance (R_{int}) on the phonon thermal conductivity (κ_{ph}) is discussed. With this aim, a series of PbTe-CoSb_3 polycrystalline composite materials with the different particle sizes of CoSb_3 was prepared. The structural (XRD) and microstructural analysis (SEM/EDXS) confirmed assumed chemical and phase compositions. The acoustic impedance difference (ΔZ) was determined from measured sound velocities in PbTe and CoSb_3 phases. The interface thermal resistance (R_{int}) was calculated using the Debye model and agrees with the experimental R_{int}. It is shown that the κ_{ph} of the composite may be reduced when the particle size of the dispersed phase (CoSb_3) is smaller than the critical value of ~230nm. This relationship was concluded to be crucial for controlling the heat transport phenomena in composite thermoelectric materials. The selection of the components with different elastic properties (acoustic impedance) and particle size smaller than the Kapitza radius leads to a new direction in the engineering of composite TE materials with designed thermal properties

cond-mat.mtrl-sci↗

arXiv2020

Effective Thermal Conductivity of SrBi$_4$Ti$_4$O$_{15}$-La$_{0.7}$Sr$_{0.3}$MnO$_3$ Oxide composite: Role of Particle Size and Interface Thermal Resistance

We present a novel approach to reduce the thermal conductivity ($κ$) in thermoelectric composite materials using acoustic impedance mismatch and the Debye model. Also, the correlation between interface thermal resistance (R$_{int}$) and the particle size of the dispersed phase on the k of the composite is discussed. In particular, the $κ$ of an oxide composite which consists of a natural superlattice Aurivillius phase (SrBi$_4$Ti$_4$O$_{15}$) as a matrix and perovskite (La$_{0.7}$Sr$_{0.3}$MnO$_3$) as a dispersed phase is investigated. A significant reduction in the $κ$ of composite, even lower than the $κ$ of the matrix when the particle size of La$_{0.7}$Sr$_{0.3}$MnO$_3$ is smaller than the Kapitza radius (a$_K$) is observed, depicting that R$_{int}$ dominates for particle size lower than a$_K$ due to increased surface to volume ratio. The obtained results have the potential to provide new directions for engineering composite thermoelectric systems with desired thermal conductivity and promising in the field of energy harvesting.

cond-mat.mtrl-sci↗