arXiv subjects

Kuan Yen Tan

Publications and source records attributed to Kuan Yen Tan.

At least 19 recordsLinked to original sources

arXiv2025

Enhancement of Electric Drive in Silicon Quantum Dots with Electric Quadrupole Spin Resonance

Quantum computation with electron spin qubits requires coherent and efficient manipulation of these spins, typically accomplished through the application of alternating magnetic or electric fields for electron spin resonance (ESR). In particular, electrical driving allows us to apply localized fields on the electrons, which benefits scale-up architectures. However, we have found that Electric Dipole Spin Resonance (EDSR) is insufficient for modeling the Rabi behavior in recent experimental studies. Therefore, we propose that the electron spin is being driven by a new method of electric spin qubit control which generalizes the spin dynamics by taking into account a quadrupolar contribution of the quantum dot: electric quadrupole spin resonance (EQSR). In this work, we explore the electric quadrupole driving of a quantum dot in silicon, specifically examining the cases of 5 and 13 electron occupancies.

cond-mat.mes-hall↗

arXiv2022

Long-distance transmon coupler with CZ gate fidelity above $99.8\%$

Tunable coupling of superconducting qubits has been widely studied due to its importance for isolated gate operations in scalable quantum processor architectures. Here, we demonstrate a tunable qubit-qubit coupler based on a floating transmon device which allows us to place qubits at least 2 mm apart from each other while maintaining over 50 MHz coupling between the coupler and the qubits. In the introduced tunable-coupler design, both the qubit-qubit and the qubit-coupler couplings are mediated by two waveguides instead of relying on direct capacitive couplings between the components, reducing the impact of the qubit-qubit distance on the couplings. This leaves space for each qubit to have an individual readout resonator and a Purcell filter needed for fast high-fidelity readout. In addition, the large qubit-qubit distance reduces unwanted non-nearest neighbor coupling and allows multiple control lines to cross over the structure with minimal crosstalk. Using the proposed flexible and scalable architecture, we demonstrate a controlled-$Z$ gate with $(99.81 \pm 0.02)\%$ fidelity.

quant-ph↗

arXiv2022

Unimon qubit

Superconducting qubits are one of the most promising candidates to implement quantum computers. The superiority of superconducting quantum computers over any classical device in simulating random but well-determined quantum circuits has already been shown in two independent experiments and important steps have been taken in quantum error correction. However, the currently wide-spread qubit designs do not yet provide high enough performance to enable practical applications or efficient scaling of logical qubits owing to one or several following issues: sensitivity to charge or flux noise leading to decoherence, too weak non-linearity preventing fast operations, undesirably dense excitation spectrum, or complicated design vulnerable to parasitic capacitance. Here, we introduce and demonstrate a superconducting-qubit type, the unimon, which combines the desired properties of high non-linearity, full insensitivity to dc charge noise, insensitivity to flux noise, and a simple structure consisting only of a single Josephson junction in a resonator. We measure the qubit frequency, $ω_{01}/(2π)$, and anharmonicity $α$ over the full dc-flux range and observe, in agreement with our quantum models, that the qubit anharmonicity is greatly enhanced at the optimal operation point, yielding, for example, 99.9% and 99.8% fidelity for 13-ns single-qubit gates on two qubits with $(ω_{01},α)=(4.49~\mathrm{GHz}, 434~\mathrm{ MHz})\times 2π$ and $(3.55~\mathrm{GHz}, 744~\mathrm{ MHz})\times 2π$, respectively. The energy relaxation time $T_1\lesssim 10~μ\mathrm{s}$ is stable for hours and seems to be limited by dielectric losses. Thus, future improvements of the design, materials, and gate time may promote the unimon to break the 99.99% fidelity target for efficient quantum error correction and possible quantum advantage with noisy systems.

quant-ph↗

arXiv2021

Recent Developments in Quantum-Circuit Refrigeration

We review the recent progress in direct active cooling of the quantum-electric degrees freedom in engineered circuits, or quantum-circuit refrigeration. In 2017, the invention of a quantum-circuit refrigerator (QCR) based on photon-assisted tunneling of quasiparticles through a normal-metal--insulator--superconductor junction inspired a series of experimental studies demonstrating the following main properties: (i) the direct-current (dc) bias voltage of the junction can change the QCR-induced damping rate of a superconducting microwave resonator by orders of magnitude and give rise to non-trivial Lamb shifts, (ii) the damping rate can be controlled in nanosecond time scales, and (iii) the dc bias can be replaced by a microwave excitation, the amplitude of which controls the induced damping rate. Theoretically, it is predicted that state-of-the-art superconducting resonators and qubits can be reset with an infidelity lower than $10^{-4}$ in tens of nanoseconds using experimentally feasible parameters. A QCR-equipped resonator has also been demonstrated as an incoherent photon source with an output temperature above one kelvin yet operating at millikelvin. This source has been used to calibrate cryogenic amplification chains. In the future, the QCR may be experimentally used to quickly reset superconducting qubits, and hence assist in the great challenge of building a practical quantum computer.

quant-ph↗

arXiv2021

Photon-number-dependent effective Lamb shift

The Lamb shift, an energy shift arising from the presence of the electromagnetic vacuum, has been observed in various quantum systems and established as the part of the energy shift independent of the environmental photon number. However, typical studies are based on simplistic bosonic models which may be challenged in practical quantum devices. We demonstrate a hybrid bosonic-fermionic environment for a linear resonator mode and observe that the photon number in the environment can dramatically increase both the dissipation and the effective Lamb shift of the mode. Our observations are quantitatively described by a first-principles model which we develop here also to guide device design for future quantum-technological applications. The device demonstrated here can be utilized as a fully rf-operated quantum-circuit refrigerator to quickly reset superconducting qubits.

quant-ph↗

arXiv2021

Pauli Blockade in Silicon Quantum Dots with Spin-Orbit Control

Quantum computation relies on accurate measurements of qubits not only for reading the output of the calculation, but also to perform error correction. Most proposed scalable silicon architectures utilize Pauli blockade of triplet states for spin-to-charge conversion. In recent experiments, there have been instances when instead of conventional triplet blockade readout, Pauli blockade is sustained only between parallel spin configurations, with $|T_0\rangle$ relaxing quickly to the singlet state and leaving $|T_+\rangle$ and $|T_-\rangle$ states blockaded -- which we call \textit{parity readout}. Both types of blockade can be used for readout in quantum computing, but it is crucial to maximize the fidelity and understand in which regime the system operates. We devise and perform an experiment in which the crossover between parity and singlet-triplet readout can be identified by investigating the underlying physics of the $|T_0\rangle$ relaxation rate. This rate is tunable over four orders of magnitude by controlling the Zeeman energy difference between the dots induced by spin-orbit coupling, which in turn depends on the direction of the applied magnetic field. We suggest a theoretical model incorporating charge noise and relaxation effects that explains quantitatively our results. Investigating the model both analytically and numerically, we identify strategies to obtain on-demand either singlet-triplet or parity readout consistently across large arrays of dots. We also discuss how parity readout can be used to perform full two-qubit state tomography and its impact on quantum error detection schemes in large-scale silicon quantum computers.

quant-ph↗

arXiv2020

Broadband Tunable Phase Shifter For Microwaves

We implement a broadly tunable phase shifter for microwaves based on superconducting quantum interference devices (SQUIDs) and study it both experimentally and theoretically. At different frequencies, a unit transmission coefficient, $|S_{21}|=1$, can be theoretically achieved along a curve where the phase shift is controllable by magnetic flux. The fabricated device consists of three equidistant SQUIDs interrupting a transmission line. We model each SQUID embedded at different positions along the transmission line with two parameters, capacitance and inductance, the values of which we extract from the experiments. In our experiments, the tunability of the phase shift varies from from $0.07\timesπ$ to $0.14\timesπ$ radians along the full-transmission curve with the input frequency ranging from 6.00 to 6.28~GHz. The reported measurements are in good agreement with simulations, which is promising for future design work of phase shifters for different applications.

physics.app-ph↗

arXiv2019

Fast control of dissipation in a superconducting resonator

We report on fast tunability of an electromagnetic environment coupled to a superconducting coplanar waveguide resonator. Namely, we utilize a recently-developed quantum-circuit refrigerator (QCR) to experimentally demonstrate a dynamic tunability in the total damping rate of the resonator up to almost two orders of magnitude. Based on the theory it corresponds to a change in the internal damping rate by nearly four orders of magnitude. The control of the QCR is fully electrical, with the shortest implemented operation times in the range of 10 ns. This experiment constitutes a fast active reset of a superconducting quantum circuit. In the future, a similar scheme can potentially be used to initialize superconducting quantum bits.

quant-ph↗

arXiv2019

Calibration of cryogenic amplification chains using normal-metal--insulator--superconductor junctions

Various applications of quantum devices call for an accurate calibration of cryogenic amplification chains. To this end, we present a convenient calibration scheme and use it to accurately measure the total gain and noise temperature of an amplification chain by employing normal-metal--insulator--superconductor (NIS) junctions. Our method is based on the radiation emitted by inelastic electron tunneling across voltage-biased NIS junctions. We derive an analytical equation that relates the generated power to the applied bias voltage which is the only control parameter of the device. After the setup has been characterized using a standard voltage reflection measurement, the total gain and the noise temperature are extracted by fitting the analytical equation to the microwave power measured at the output of the amplification chain. The 1$σ$ uncertainty of the total gain of 51.84 dB appears to be of the order of 0.1 dB.

quant-ph↗

arXiv2018

Optimized heat transfer at exceptional points in quantum circuits

Superconducting quantum circuits are potential candidates to realize a large-scale quantum computer. The envisioned large density of integrated components, however, requires a proper thermal management and control of dissipation. To this end, it is advantageous to utilize tunable dissipation channels and to exploit the optimized heat flow at exceptional points (EPs). Here, we experimentally realize an EP in a superconducting microwave circuit consisting of two resonators. The EP is a singularity point of the Hamiltonian, and corresponds to the most efficient heat transfer between the resonators without oscillation of energy. We observe a crossover from underdamped to overdamped coupling via the EP by utilizing photon-assisted tunneling as an \emph{in situ} tunable dissipative element in one of the resonators. The methods studied here can be applied to different circuits to obtain fast dissipation, for example, for initializing qubits to their ground states. In addition, these results pave the way towards thorough investigation of parity--time ($\mathcal{PT}$) symmetric systems and the spontaneous symmetry breaking in superconducting microwave circuits operating at the level of single energy quanta.

cond-mat.mes-hall↗

arXiv2017

Flux-tunable heat sink for quantum electric circuits

Superconducting microwave circuits show great potential for practical quantum technological applications such as quantum information processing. However, fast and on-demand initialization of the quantum degrees of freedom in these devices remains a challenge. Here, we experimentally implement a tunable heat sink that is potentially suitable for the initialization of superconducting qubits. Our device consists of two coupled resonators. The first resonator has a high quality factor and a fixed frequency whereas the second resonator is designed to have a low quality factor and a tunable resonance frequency. We engineer the low quality factor using an on-chip resistor and the frequency tunability using a superconducting quantum interference device. When the two resonators are in resonance, the photons in the high-quality resonator can be efficiently dissipated. We show that the corresponding loaded quality factor can be tuned from above $10^5$ down to a few thousand at 10 GHz in good quantitative agreement with our theoretical model.

cond-mat.mes-hall↗

arXiv2017

Spin-selective electron transfer in quantum dot array

We propose a spin-selective coherent electron transfer in a silicon-quantum-dot array. Oscillating magnetic fields and temporally controlled gate voltages are utilised to separate the electron wave function into different quantum dots depending on the spin state. We introduce non-adiabatic and adiabatic protocols which offer fast electron transfer and the robustness against the error in the control-field pulse area, respectively. We also study a shortcut-to-adiabaticity protocol which compromises these two protocols. We show that this scheme can be extended to multi-electron systems straightforwardly and used for non-local manipulations of the electrons.

cond-mat.mes-hall↗

arXiv2017

Theory of quantum-circuit refrigeration by photon-assisted electron tunneling

We focus on a recently experimentally realized scenario of normal-metal-insulator-superconductor tunnel junctions coupled to a superconducting resonator. We develop a first-principles theory to describe the effect of photon-assisted electron tunneling on the quantum state of the resonator. Our results are in very good quantitative agreement with the previous experiments on refrigeration and heating of the resonator using the photon-assisted tunneling, thus providing a stringent verification of the developed theory. Importantly, our results provide simple analytical estimates of the voltage-tunable coupling strength and temperature of the thermal reservoir formed by the photon-assisted tunneling. Consequently, they are used to introduce optimization principles for initialization of quantum devices using such a quantum-circuit refrigerator. Thanks to the first-principles nature of our approach, extension of the theory to the full spectrum of quantum electric devices seems plausible.

cond-mat.mes-hall↗

arXiv2017

Quantum Circuit Refrigerator

Quantum technology promises revolutionizing applications in information processing, communications, sensing, and modelling. However, efficient on-demand cooling of the functional quantum degrees of freedom remains a major challenge in many solid-state implementations, such as superconducting circuits. Here, we demonstrate direct cooling of a superconducting resonator mode using voltage-controllable quantum tunneling of electrons in a nanoscale refrigerator. This result is revealed by a decreased electron temperature at a resonator-coupled probe resistor, even when the electrons in the refrigerator itself are at an elevated temperature. Our conclusions are verified by control experiments and by a good quantitative agreement between a detailed theoretical model and the direct experimental observations in a broad range of operation voltages and phonon bath temperatures. In the future, the introduced refrigerator can be integrated with different quantum electric devices, potentially enhancing their performance. For the superconducting quantum computer, for example, it may provide an efficient way of initializing the quantum bits.

cond-mat.mes-hall↗

arXiv2017

Microwave Admittance of Gold-Palladium Nanowires with Proximity-Induced Superconductivity

We report quantitative electrical admittance measurements of diffusive superconductor--normal-metal--superconductor (SNS) junctions at gigahertz frequencies and millikelvin temperatures. The gold-palladium-based SNS junctions are arranged into a chain of superconducting quantum interference devices. The chain is coupled strongly to a multimode microwave resonator with a mode spacing of approximately 0.6 GHz. By measuring the resonance frequencies and quality factors of the resonator modes, we extract the dissipative and reactive parts of the admittance of the chain. We compare the phase and temperature dependence of the admittance near 1 GHz to theory based on the time-dependent Usadel equations. This comparison allows us to identify important discrepancies between theory and experiment that are not resolved by including inelastic scattering or elastic spin-flip scattering in the theory.

cond-mat.mes-hall↗

arXiv2017

Quantum Gates for Propagating Microwave Photons

We report a generic scheme to implement transmission-type quantum gates for propagating microwave photons, based on a sequence of lumped-element components on transmission lines. By choosing three equidistant superconducting quantum interference devices (SQUIDs) as the components on a single transmission line, we experimentally implement a magnetic-flux-tunable phase shifter and demonstrate that it produces a broad range of phase shifts and full transmission within the experimental uncertainty. Together with previously demonstrated beam splitters, these phase shifters can be utilized to implement arbitrary single-qubit gates. Furthermore, we theoretically show that replacing the SQUIDs by superconducting qubits, the phase shifter can be made strongly nonlinear, thus introducing deterministic photon--photon interactions. These results critically complement the previous demonstrations of on-demand single-photon sources and detectors, and hence pave the way for an all-microwave quantum computer based on propagating photons.

quant-ph↗

arXiv2016

Three-waveform bidirectional pumping of single electrons with a silicon quantum dot

Semiconductor-based quantum dot single-electron pumps are currently the most promising candidates for the direct realization of the emerging quantum standard of the ampere in the International System of Units. Here, we discuss a silicon quantum dot single-electron pump with radio frequency control over the transparencies of entrance and exit barriers as well as the dot potential. We show that our driving protocol leads to robust bidirectional pumping: one can conveniently reverse the direction of the quantized current by changing only the phase shift of one driving waveform with respect to the others. We also study the improvement in the robustness of the current quantization owing to the introduction of three control voltages in comparison with the two-waveform driving. We anticipate that this pumping technique may be used in the future to perform error counting experiments by pumping the electrons into and out of a reservoir island monitored by a charge sensor.

cond-mat.mes-hall↗

arXiv2015

Observation of quantum-limited heat conduction over macroscopic distances

The emerging quantum technological apparatuses [1,2], such as the quantum computer [3-5], call for extreme performance in thermal engineering at the nanoscale [6]. Importantly, quantum mechanics sets a fundamental upper limit for the flow of information and heat, which is quantified by the quantum of thermal conductance [7,8]. The physics of this kind of quantum-limited heat conduction has been experimentally studied for lattice vibrations, or phonons [9], for electromagnetic interactions [10], and for electrons [11]. However, the short distance between the heat-exchanging bodies in the previous experiments hinders the applicability of these systems in quantum technology. Here, we present experimental observations of quantum-limited heat conduction over macroscopic distances extending to a metre. We achieved this striking improvement of four orders of magnitude in the distance by utilizing microwave photons travelling in superconducting transmission lines. Thus it seems that quantum-limited heat conduction has no fundamental restriction in its distance. This work lays the foundation for the integration of normal-metal components into superconducting transmission lines, and hence provides an important tool for circuit quantum electrodynamics [12-14], which is the basis of the emerging superconducting quantum computer [15]. In particular, our results demonstrate that cooling of nanoelectronic devices can be carried out remotely with the help of a far-away engineered heat sink. In addition, quantum-limited heat conduction plays an important role in the contemporary studies of thermodynamics such as fluctuation relations and Maxwell's demon [16,17]. Here, the long distance provided by our results may, for example, lead to an ultimate efficiency of mesoscopic heat engines with promising practical applications [18].

cond-mat.mes-hall↗