arXiv subjects

Kum-Chol Ri

Publications and source records attributed to Kum-Chol Ri.

7 recordsLinked to original sources

arXiv2020

Contrary Effect of B and N Doping into Graphene and Graphene Oxide Heterostructures with MoS$_2$ on Interface Function and Hydrogen Evolution

Molybdenum disulfide (MoS$_2$) attracts attention as a high efficient and low cost photocatalyst for hydrogen production, but suffers from low conductance and high recombination rate of photo-generated charge carriers. In this work, we investigate the MoS$_2$ heterostructures with graphene variants (GVs), including graphene, graphene oxide, and their boron- and nitrogen-doped variants, by using first-principles calculations. Systematic comparison between graphene and graphene oxide composites is performed, and contrary effect of B and N doping on interface function and hydrogen evolution is clarified. We find that upon the formation of the interfaces some amount of electronic charge transfers from the GV side to the MoS$_2$ layer, inducing the creation of interface dipole and the reduction of work function, which is more pronounced in the graphene oxide composites. Moreover, our results reveal that N doping enhances the interface functions by forming donor-type interface states, whereas B doping reduces those functions by forming acceptor-type interface states. However, the B-doped systems exhibit lower Gibbs free energy difference for hydrogen adsorption on GV side than the N-doped systems, which deserves much consideration in the design of new functional photocatalysts.

cond-mat.mtrl-sci↗

arXiv2020

Influence of Ti/V Cation-Exchange in Na$_2$Ti$_3$O$_7$ on Na-Ion Negative Electrode Performance: an Insight from First-Principles Study

Sodium-titanate \ce{Na2Ti3O7} (NTO) is regarded as a highly promising anode material with a very low voltage for Na-ion batteries and capacitors, but suffered from relatively low specific capacity and poor electron conductivity. Here we report a first-principles study of electrochemical properties of NTO and its vanadium-modified compounds, \ce{Na2Ti2VO7} and \ce{Na2TiV2O7} (NTVO), offering an insight into their detailed working mechanism and an evidence of enhancing anode performance by Ti/V cation exchange. Our calculations reveal that the specific capacity can increase from 177 mAh g$^{-1}$ in NTO to over 280 mAh g$^{-1}$ in NTVO when using \ce{NaTi_{3-$x$}V_{$x$}O7} ($x$ = 1, 2) as a starting material for Na insertion due to higher oxidation state of \ce{V^{+5}}, together with lower voltages and small volume expansion rates below 3\%. With Ti/V exchange, we obtain slightly higher activation energies for Na ion migrations along the two different pathways, but find an obvious improvement of electronic transport in NTVO.

cond-mat.mtrl-sci↗

arXiv2020

Molecular dynamics study of the effect of moisture and porosity on thermal conductivity of tobermorite 14 Å

The effect of moisture and porosity on thermal conductivity of tobermorite 14 Å~as the major component of cement paste is studied by using molecular dynamics simulation with ClayFF potential. The calculated results show that the thermal conductivity increases monotonically as the moisture content by mass within the interior pores increases and the slope of the linear fitting function decreases as the porosity increases. Meanwhile, the normalized thermal conductivity is found to increase exponentially as increasing the moisture content by volume. Phonon density of states of porous and moist tobermorite 14 Å~is used to explain the contribution of individual atoms and molecules to the thermal properties. The results can be potentially used to design higher thermal insulating materials with cement and concrete for energy saving buildings.

cond-mat.mtrl-sci↗

arXiv2019

Interface Engineering in Hybrid Iodide CH3NH3PbI3 Perovskite Using Lewis Base and Graphene towards High Performance Solar Cells

Perovskite solar cells have achieved a substantial breakthrough via advanced interface engineerings. Reports have emphasized that combining the hybrid perovskites with Lewis base and graphene improve the performance; the underlying mechanisms are not yet fully understood. Here, using density functional theory, we show that upon the formation of CH3NH3PbI3 interfaces with three different Lewis base molecules and graphene, the binding strength with S-donors thiocarbamide and thioacetamide is higher than with O-donor dimethyl sulfoxide, while the interface dipole and work function reduction tend to increase from S-donors to O-donor. Furthermore, we provide evidences of deep trap states elimination in the S-donor perovskite interfaces through the analysis of defect formation on CH3NH3PbI3(110) surface, and of stability enhancement by estimating activation barriers for iodine atom migrations. These theoretical predictions are in line with the experimental observation of performance enhancement in the perovskites prepared using thiocarbamide.

physics.app-ph↗

arXiv2019

First-Principles Study on NaxTiO2 with Trigonal Bipyramid Structures: An Insight into Sodium-Ion Battery Anode Application

Developing efficient anode materials with low electrode voltage, high specific capacity and superior rate capability is urgently required on the road to commercially viable sodium-ion batteries (SIBs). Aiming at finding a new SIB anode material, we investigate the electrochemical properties of NaxTiO2 compounds with unprecedented penta-oxygen-coordinated trigonal bipyramid (TB) structures by using the first-principles calculations. Identifying the four different TB phases, we perform the optimization of their crystal structures and calculate their energetics such as sodium binding energy, formation energy, electrode potential and activation energy for Na ion migration. The computations reveal that TB-I phase can be the best choice among the four TB phases for the SIB anode material due to relatively low volume change under 4% upon Na insertion, low electrode voltage under 1.0 V with a possibility of realizing the highest specific capacity of ~335 mAh/g from fully sodiation at x = 1, and reasonably low activation barriers under 0.35 eV at the Na content from x = 0.125 to x = 0.5. Through the analysis of electronic density of states and charge density difference upon sodiation, we find that the NaxTiO2 compounds in TB phases change from electron insulating to electron conducting material due to the electron transfer from Na atom to Ti ion, ordering the Ti 4+/Ti 3+ redox couple for SIB operation.

cond-mat.mtrl-sci↗

arXiv2019

Formation and characterization of ceramic coating from alumino silicate mineral powders in the matrix of cement composite on the concrete wall

Enhancement of thermal performance of concrete wall is nowadays of great importance in reducing the operational energy demand of buildings. We developed a new kind of inorganic coating material based on \ce{SiO2}-\ce{Al2O3}-rich minerals and Portland cement (PC) powder. The finely pulverized mineral powder with the particle size distribution (PSD) of 0.4-40 $μ$m was mixed with the vehicle solvent containing some agents, cement powder with PSD of 2-100 $μ$m, and water in the certain weight ratio, producing the colloid solution. After application within 2 hours to the plaster layer of concrete wall and sufficient long hardening period of over three months, the coating layer of 0.6-1.0 mm thickness was observed to become a densified ceramic. Powder X-ray diffraction (XRD) experiments were performed to identify the crystalline components of minerals, cement and ceramic coating powders. Three- and two-dimensional surface morphologies and chemical compositions of coating material were obtained with the optical interferometer and scanning electron microscope (SEM) equipped with an energy dispersive X-ray analyzer (EDX). These XRD and SEM/EDX analyses demonstrated obviously that the coating layer is mainly composed of the calcium-silicate-hydrate (C-S-H) and the calcium-aluminate-hydrate (C-A-H) ceramics with the relatively small number of closed pores (10\% porosity) compared with the cement mortar and concrete layers. Two-step hydrations of cement and subsequently \ce{SiO2}-\ce{Al2O3} promoted by the alkali product \ce{Ca(OH)2} were proposed as the main mechanism of ceramic formation.

cond-mat.mtrl-sci↗

arXiv2018

Two-dimensional hybrid composites of SnS2 with graphene and graphene oxide for improving sodium storage: A first-principles study

Among the recent achievements of sodium-ion battery (SIB) electrode materials, hybridization of two-dimentional (2D) materials is one of the most interesting appointments. In this work, we propose to use the 2D hybrid composites of SnS2 with graphene or graphene oxide (GO) layers as SIB anode, based on the first-principles calculations of their atomic structures, sodium intercalation energetics and electronic properties. The calculations reveal that graphene or GO film can effectively support not only the stable formation of hetero-interface with the SnS2 layer but also the easy intercalation of sodium atom with low migration energy and acceptable low volume change. The electronic charge density differences and the local density of state indicate that the electrons are transferred from the graphene or GO layer to the SnS2 layer, facilitating the formation of hetero-interface and improving the electronic conductance of the semiconducting SnS2 layer. These 2D hybrid composites of SnS2/G or GO are concluded to be more promising candidates for SIB anodes compared with the individual monolayers.

cond-mat.mtrl-sci↗