arXiv subjects

Kumar Vijay Mishra

Publications and source records attributed to Kumar Vijay Mishra.

At least 91 records · Page 5Linked to original sources

arXiv2022

Multi-dimensional dual-blind deconvolution approach toward joint radar-communications

We consider a joint multiple-antenna radar-communications system in a co-existence scenario. Contrary to conventional applications, wherein at least the radar waveform and communications channel are known or estimated \textit{a priori}, we investigate the case when the channels and transmit signals of both systems are unknown. In radar applications, this problem arises in multistatic or passive systems, where transmit signal is not known. Similarly, highly dynamic vehicular or mobile communications may render prior estimates of wireless channel unhelpful. In particular, the radar signal reflected-off multiple targets is overlaid with the multi-carrier communications signal. In order to extract the unknown continuous-valued target parameters (range, Doppler velocity, and direction-of-arrival) and communications messages, we formulate the problem as a sparse dual-blind deconvolution and solve it using atomic norm minimization. Numerical experiments validate our proposed approach and show that precise estimation of continuous-valued channel parameters, radar waveform, and communications messages is possible up to scaling ambiguities.

cs.IT↗

arXiv2022

IRS-Aided Radar: Enhanced Target Parameter Estimation via Intelligent Reflecting Surfaces

The intelligent reflecting surface (IRS) technology has recently attracted a lot of interest in wireless communications research. An IRS consists of passive reflective elements capable of tuning the phase, amplitude, frequency and polarization of the impinging waveforms. Given such desirable properties, the wireless channel characteristics can be controlled and optimized for specific signal design and processing needs -- thus promising significant potential in radar applications. In this paper, we establish the theoretical foundations for introducing IRS into a radar system and study the potential to improve target parameter estimation. More specifically, we will investigate the deployment of IRS in cases where the line-of-sight (LOS) link is weak or blocked by obstructions. We demonstrate that the IRS can provide a virtual or non-line-of-sight (NLOS) link between the radar and target leading to an enhanced radar performance. The effectiveness of such an IRS-provided virtual link in estimating the moving target parameters is illustrated under both optimized and non-optimized IRS scenarios. Numerical simulations indicate that the IRS can enhance the target parameter estimation when the LOS link is weaker than $\sim 10^{-1}$ in relative strength in comparison with the NLOS link.

eess.SP↗

arXiv2022

Federated Channel Learning for Intelligent Reflecting Surfaces With Fewer Pilot Signals

Channel estimation is a critical task in intelligent reflecting surface (IRS)-assisted wireless systems due to the uncertainties imposed by environment dynamics and rapid changes in the IRS configuration. To deal with these uncertainties, deep learning (DL) approaches have been proposed. Previous works consider centralized learning (CL) approach for model training, which entails the collection of the whole training dataset from the users at the base station (BS), hence introducing huge transmission overhead for data collection. To address this challenge, this paper proposes a federated learning (FL) framework to jointly estimate both direct and cascaded channels in IRS-assisted wireless systems. We design a single convolutional neural network trained on the local datasets of the users without sending them to the BS. We show that the proposed FL-based channel estimation approach requires approximately 60% fewer pilot signals and it exhibits 12 times lower transmission overhead than CL, while maintaining satisfactory performance close to CL. In addition, it provides lower estimation error than the state-of-the-art DL-based schemes.

eess.SP↗

arXiv2022

Cognitive Learning-Aided Multi-Antenna Communications

Cognitive communications have emerged as a promising solution to enhance, adapt, and invent new tools and capabilities that transcend conventional wireless networks. Deep learning (DL) is critical in enabling essential features of cognitive systems because of its fast prediction performance, adaptive behavior, and model-free structure. These features are especially significant for multi-antenna wireless communications systems, which generate and handle massive data. Multiple antennas may provide multiplexing, diversity, or antenna gains that, respectively, improve the capacity, bit error rate, or the signal-to-interference-plus-noise ratio. In practice, multi-antenna cognitive communications encounter challenges in terms of data complexity and diversity, hardware complexity, and wireless channel dynamics. DL solutions such as federated learning, transfer learning and online learning, tackle these problems at various stages of communications processing, including multi-channel estimation, hybrid beamforming, user localization, and sparse array design. This article provides a synopsis of various DL-based methods to impart cognitive behavior to multi-antenna wireless communications for improved robustness and adaptation to the environmental changes while providing satisfactory spectral efficiency and computation times. We discuss DL design challenges from the perspective of data, learning, and transceiver architectures. In particular, we suggest quantized learning models, data/model parallelization, and distributed learning methods to address the aforementioned challenges.

eess.SP↗

arXiv2022

Resource Allocation in Heterogeneously-Distributed Joint Radar-Communications under Asynchronous Bayesian Tracking Framework

Optimal allocation of shared resources is key to deliver the promise of jointly operating radar and communications systems. In this paper, unlike prior works which examine synergistic access to resources in colocated joint radar-communications or among identical systems, we investigate this problem for a distributed system comprising heterogeneous radars and multi-tier communications. In particular, we focus on resource allocation in the context of multi-target tracking (MTT) while maintaining stable communication connections. By simultaneously allocating the available power, dwell time and shared bandwidth, we improve the MTT performance under a Bayesian tracking framework and guarantee the communications throughput. Our alternating allocation of heterogeneous resources (ANCHOR) approach solves the resulting nonconvex problem based on the alternating optimization method that monotonically improves the Bayesian Cramér-Rao bound. Numerical experiments demonstrate that ANCHOR significant improves the tracking error over two baseline allocations and stability under different target scenarios and radar-communications network distributions.

eess.SP↗

arXiv2022

Heterogeneously-Distributed Joint Radar Communications: Bayesian Resource Allocation

Due to spectrum scarcity, the coexistence of radar and wireless communication has gained substantial research interest recently. Among many scenarios, the heterogeneouslydistributed joint radar-communication system is promising due to its flexibility and compatibility of existing architectures. In this paper, we focus on a heterogeneous radar and communication network (HRCN), which consists of various generic radars for multiple target tracking (MTT) and wireless communications for multiple users. We aim to improve the MTT performance and maintain good throughput levels for communication users by a well-designed resource allocation. The problem is formulated as a Bayesian Cramér-Rao bound (CRB) based minimization subjecting to resource budgets and throughput constraints. The formulated nonconvex problem is solved based on an alternating descent-ascent approach. Numerical results demonstrate the efficacy of the proposed allocation scheme for this heterogeneous network.

eess.SP↗

arXiv2022

Joint Transmit and Reflective Beamformer Design for Secure Estimation in IRS-Aided WSNs

Wireless sensor networks (WSNs) are vulnerable to eavesdropping as the sensor nodes (SNs) communicate over an open radio channel. Intelligent reflecting surface (IRS) technology can be leveraged for physical layer security in WSNs. In this paper, we propose a joint transmit and reflective beamformer (JTRB) design for secure parameter estimation at the fusion center (FC) in the presence of an eavesdropper (ED) in a WSN. We develop a semidefinite relaxation (SDR)-based iterative algorithm, which alternately yields the transmit beamformer at each SN and the corresponding reflection phases at the IRS, to achieve the minimum mean-squared error (MSE) parameter estimate at the FC, subject to transmit power and ED signal-to-noise ratio constraints. Our simulation results demonstrate robust MSE and security performance of the proposed IRS-based JTRB technique.

eess.SP↗

arXiv2022

OptM3Sec: Optimizing Multicast IRS-Aided Multiantenna DFRC Secrecy Channel with Multiple Eavesdroppers

With the use of common signaling methods for dual-function radar-communications (DFRC) systems, the susceptibility of eavesdropping on messages aimed at legitimate users has worsened. For DFRC systems, the radar target may act as an eavesdropper (ED) that receives a high-energy signal thereby leading to additional challenges. Unlike prior works, we consider a multicast multi-antenna DFRC system with multiple EDs. We then propose a physical layer design approach to maximize the secrecy rate by installing intelligent reflecting surfaces in the radar channels. Our optimization of multiple ED multicast multi-antenna DFRC secrecy rate (OptM3Sec) approach solves this highly nonconvex problem with respect to the precoding matrices. Our numerical experiments demonstrate the feasibility of our algorithm in maximizing the secrecy rate in this DFRC setup.

cs.IT↗

arXiv2022

A Family of Deep Learning Architectures for Channel Estimation and Hybrid Beamforming in Multi-Carrier mm-Wave Massive MIMO

Hybrid analog and digital beamforming transceivers are instrumental in addressing the challenge of expensive hardware and high training overheads in the next generation millimeter-wave (mm-Wave) massive MIMO (multiple-input multiple-output) systems. However, lack of fully digital beamforming in hybrid architectures and short coherence times at mm-Wave impose additional constraints on the channel estimation. Prior works on addressing these challenges have focused largely on narrowband channels wherein optimization-based or greedy algorithms were employed to derive hybrid beamformers. In this paper, we introduce a deep learning (DL) approach for channel estimation and hybrid beamforming for frequency-selective, wideband mm-Wave systems. In particular, we consider a massive MIMO Orthogonal Frequency Division Multiplexing (MIMO-OFDM) system and propose three different DL frameworks comprising convolutional neural networks (CNNs), which accept the raw data of received signal as input and yield channel estimates and the hybrid beamformers at the output. We also introduce both offline and online prediction schemes. Numerical experiments demonstrate that, compared to the current state-of-the-art optimization and DL methods, our approach provides higher spectral efficiency, lesser computational cost and fewer number of pilot signals, and higher tolerance against the deviations in the received pilot data, corrupted channel matrix, and propagation environment.

eess.SP↗

arXiv2021

Non-Convex Recovery from Phaseless Low-Resolution Blind Deconvolution Measurements using Noisy Masked Patterns

This paper addresses recovery of a kernel $\boldsymbol{h}\in \mathbb{C}^{n}$ and a signal $\boldsymbol{x}\in \mathbb{C}^{n}$ from the low-resolution phaseless measurements of their noisy circular convolution $\boldsymbol{y} = \left \rvert \boldsymbol{F}_{lo}( \boldsymbol{x}\circledast \boldsymbol{h}) \right \rvert^{2} + \boldsymbolη$, where $\boldsymbol{F}_{lo}\in \mathbb{C}^{m\times n}$ stands for a partial discrete Fourier transform ($m<n$), $\boldsymbolη$ models the noise, and $\lvert \cdot \rvert$ is the element-wise absolute value function. This problem is severely ill-posed because both the kernel and signal are unknown and, in addition, the measurements are phaseless, leading to many $\boldsymbol{x}$-$\boldsymbol{h}$ pairs that correspond to the measurements. Therefore, to guarantee a stable recovery of $\boldsymbol{x}$ and $\boldsymbol{h}$ from $\boldsymbol{y}$, we assume that the kernel $\boldsymbol{h}$ and the signal $\boldsymbol{x}$ lie in known subspaces of dimensions $k$ and $s$, respectively, such that $m\gg k+s$. We solve this problem by proposing a blind deconvolution algorithm for phaseless super-resolution (BliPhaSu) to minimize a non-convex least-squares objective function. The method first estimates a low-resolution version of both signals through a spectral algorithm, which are then refined based upon a sequence of stochastic gradient iterations. We show that our BliPhaSu algorithm converges linearly to a pair of true signals on expectation under a proper initialization that is based on spectral method. Numerical results from experimental data demonstrate perfect recovery of both $\boldsymbol{h}$ and $\boldsymbol{x}$ using our method.

cs.IT↗

arXiv2021

Rate-Splitting Meets Cell-Free MIMO Communications

Multiuser multiple-input multiple-output wireless communications systems have the potential to satisfy the performance requirements of fifth-generation and future wireless networks. In this context, cell-free (CF) systems, where the antennas are distributed over the area of interest, have attracted attention because of their potential to enhance the overall efficiency and throughput performance when compared to traditional networks based on cells. However, the performance of CF systems is degraded by imperfect channel state information (CSI). To mitigate the detrimental effects of imperfect CSI, we employ rate splitting (RS) - a multiple-access scheme. The RS approach divides the messages of the users into two separate common and private portions so that interference is managed robustly. Unlike prior works, where the impact of RS in CF systems remains unexamined, we propose a CF architecture that employs RS with linear precoders to address deteriorated CSI. We derive closed-form expressions to compute the sum-rate performance of the proposed RS-CF architecture. Our numerical experiments show that our RS-CF system outperforms existing systems in terms of sum-rate, obtaining up to $10$% higher gain.

cs.IT↗

arXiv2021

Joint Radar-Communications Processing from a Dual-Blind Deconvolution Perspective

We consider a general spectral coexistence scenario, wherein the channels and transmit signals of both radar and communications systems are unknown at the receiver. In this \textit{dual-blind deconvolution} (DBD) problem, a common receiver admits the multi-carrier wireless communications signal that is overlaid with the radar signal reflected-off multiple targets. When the radar receiver is not collocated with the transmitter, such as in passive or multistatic radars, the transmitted signal is also unknown apart from the target parameters. Similarly, apart from the transmitted messages, the communications channel may also be unknown in dynamic environments such as vehicular networks. As a result, the estimation of unknown target and communications parameters in a DBD scenario is highly challenging. In this work, we exploit the sparsity of the channel to solve DBD by casting it as an atomic norm minimization problem. Our theoretical analyses and numerical experiments demonstrate perfect recovery of continuous-valued range-time and Doppler velocities of multiple targets as well as delay-Doppler communications channel parameters using uniformly-spaced time samples in the dual-blind receiver.

eess.SP↗

arXiv2021

Evaluation Of Orthogonal Chirp Division Multiplexing For Automotive Integrated Sensing And Communications

We consider a bistatic vehicular integrated sensing and communications (ISAC) system that employs the recently proposed orthogonal chirp division multiplexing (OCDM) multicarrier waveform. As a stand-alone communications waveform, OCDM has been shown to be robust against the interference in time-frequency selective channels. In a bistatic ISAC, we exploit this property to develop efficient receive processing algorithms that achieve high target resolution as well as high communications rate. We derive statistical bounds for our proposed Sequential symbol decoding and radar parameter estimation (SUNDAE) algorithm and compare its competitive performance with other multicarrier waveforms through numerical experiments.

cs.IT↗

arXiv2021

Terahertz-Band Joint Ultra-Massive MIMO Radar-Communications: Model-Based and Model-Free Hybrid Beamforming

Wireless communications and sensing at terahertz (THz) band are increasingly investigated as promising short-range technologies because of the availability of high operational bandwidth at THz. In order to address the extremely high attenuation at THz, ultra-massive multiple-input multiple-output (MIMO) antenna systems have been proposed for THz communications to compensate propagation losses. However, the cost and power associated with fully digital beamformers of these huge antenna arrays are prohibitive. In this paper, we develop wideband hybrid beamformers based on both model-based and model-free techniques for a new group-of-subarrays (GoSA) ultra-massive MIMO structure in low-THz band. Further, driven by the recent developments to save the spectrum, we propose beamformers for a joint ultra-massive MIMO radar-communications system, wherein the base station serves multi-antenna user equipment (RX), and tracks radar targets by generating multiple beams toward both RX and the targets. We formulate the GoSA beamformer design as an optimization problem to provide a trade-off between the unconstrained communications beamformers and the desired radar beamformers. To mitigate the beam split effect at THz band arising from frequency-independent analog beamformers, we propose a phase correction technique to align the beams of multiple subcarriers toward a single physical direction. To further decrease the ultra-massive MIMO computational complexity and enhance robustness, we also implement deep learning solutions to the proposed model-based hybrid beamformers. Numerical experiments demonstrate that both techniques outperform the conventional approaches in terms of spectral efficiency and radar beampatterns, as well as exhibiting less hardware cost and computation time.

eess.SP↗

arXiv2021

Information Geometry and Classical Cramér-Rao Type Inequalities

We examine the role of information geometry in the context of classical Cramér-Rao (CR) type inequalities. In particular, we focus on Eguchi's theory of obtaining dualistic geometric structures from a divergence function and then applying Amari-Nagoaka's theory to obtain a CR type inequality. The classical deterministic CR inequality is derived from Kullback-Leibler (KL)-divergence. We show that this framework could be generalized to other CR type inequalities through four examples: $α$-version of CR inequality, generalized CR inequality, Bayesian CR inequality, and Bayesian $α$-CR inequality. These are obtained from, respectively, $I_α$-divergence (or relative $α$-entropy), generalized Csiszár divergence, Bayesian KL divergence, and Bayesian $I_α$-divergence.

cs.IT↗

arXiv2021

Localization with One-Bit Passive Radars in Narrowband Internet-of-Things using Multivariate Polynomial Optimization

Several Internet-of-Things (IoT) applications provide location-based services, wherein it is critical to obtain accurate position estimates by aggregating information from individual sensors. In the recently proposed narrowband IoT (NB-IoT) standard, which trades off bandwidth to gain wide coverage, the location estimation is compounded by the low sampling rate receivers and limited-capacity links. We address both of these NB-IoT drawbacks in the framework of passive sensing devices that receive signals from the target-of-interest. We consider the limiting case where each node receiver employs one-bit analog-to-digital-converters and propose a novel low-complexity nodal delay estimation method using constrained-weighted least squares minimization. To support the low-capacity links to the fusion center (FC), the range estimates obtained at individual sensors are then converted to one-bit data. At the FC, we propose target localization with the aggregated one-bit range vector using both optimal and sub-optimal techniques. The computationally expensive former approach is based on Lasserre's method for multivariate polynomial optimization while the latter employs our less complex iterative joint r\textit{an}ge-\textit{tar}get location \textit{es}timation (ANTARES) algorithm. Our overall one-bit framework not only complements the low NB-IoT bandwidth but also supports the design goal of inexpensive NB-IoT location sensing. Numerical experiments demonstrate feasibility of the proposed one-bit approach with a $0.6$\% increase in the normalized localization error for the small set of $20$-$60$ nodes over the full-precision case. When the number of nodes is sufficiently large ($>80$), the one-bit methods yield the same performance as the full precision.

eess.SP↗

arXiv2021

Reconfigurable-Metasurface-Aided Multi-State Generalized Polarization-Space Modulation for Next-Generation Wireless Communications

We propose a low-cost reconfigurable metasurface transmitter to implement generalized polarization-space modulation (GPSM) that has been proposed for next-generation wireless communications. Unlike conventional multiple-input multiple-output GPSM, our electromagnetically-compliant, reduced form-factor design using Barium-Strontium-Titanate film yields more than two polarization states. Full-wave simulations show our optimized design achieves 0.08-0.95 polarization conversion ratio with 5% bandwidth at 28 GHz and bit error rates comparable or better than conventional systems.

physics.app-ph↗

arXiv2021

Hybrid Federated and Centralized Learning

Many of the machine learning (ML) tasks are focused on centralized learning (CL), which requires the transmission of local datasets from the clients to a parameter server (PS) leading to a huge communication overhead. Federated learning (FL) overcomes this issue by allowing the clients to send only the model updates to the PS instead of the whole dataset. In this way, FL brings the learning to edge level, wherein powerful computational resources are required on the client side. This requirement may not always be satisfied because of diverse computational capabilities of edge devices. We address this through a novel hybrid federated and centralized learning (HFCL) framework to effectively train a learning model by exploiting the computational capability of the clients. In HFCL, only the clients who have sufficient resources employ FL; the remaining clients resort to CL by transmitting their local dataset to PS. This allows all the clients to collaborate on the learning process regardless of their computational resources. We also propose a sequential data transmission approach with HFCL (HFCL-SDT) to reduce the training duration. The proposed HFCL frameworks outperform previously proposed non-hybrid FL (CL) based schemes in terms of learning accuracy (communication overhead) since all the clients collaborate on the learning process with their datasets regardless of their computational resources.

cs.LG↗