arXiv subjects

Kun Wang

Publications and source records attributed to Kun Wang.

At least 433 records · Page 24Linked to original sources

arXiv2021

Measurement Error Mitigation via Truncated Neumann Series

Measurements on near-term quantum processors are inevitably subject to hardware imperfections that lead to readout errors. Mitigation of such unavoidable errors is crucial to better explore and extend the power of near-term quantum hardware. In this work, we propose a method to mitigate measurement errors in computing quantum expectation values using the truncated Neumann series. The essential idea is to cancel the errors by combining various noisy expectation values generated by sequential measurements determined by terms in the truncated series. We numerically test this method and find that the computation accuracy is substantially improved. Our method possesses several advantages: it does not assume any noise structure, it does not require the calibration procedure to learn the noise matrix a prior, and most importantly, the incurred error mitigation overhead is independent of system size, as long as the noise resistance of the measurement device is moderate. All these advantages empower our method as a practical measurement error mitigation method for near-term quantum devices.

quant-ph↗

arXiv2021

Nanodevices engineering and spin transport properties of MnBi2Te4 monolayer

Two-dimensional (2D) magnetic materials are essential for the development of the next-generation spintronic technologies. Recently, layered van der Waals (vdW) compound MnBi2Te4 (MBT) has attracted great interest, and its 2D structure has been reported to host coexisting magnetism and topology. Here, we design several conceptual nanodevices based on MBT monolayer (MBT-ML) and reveal their spin-dependent transport properties by means of the first-principles calculations. The pn-junction diodes and sub-3-nm pin-junction field-effect transistors (FETs) show a strong rectifying effect and a spin filtering effect, with an ideality factor n close to 1 even at a reasonably high temperature. In addition, the pip- and nin-junction FETs give an interesting negative differential resistive (NDR) effect. The gate voltages can tune currents through these FETs in a large range. Furthermore, the MBT-ML has a strong response to light. Our results uncover the multifunctional nature of MBT-ML, pave the road for its applications in diverse next-generation semiconductor spin electric devices.

cond-mat.mtrl-sci↗

arXiv2021

Effect of symmetrical frequency chirp on pair production

By using Dirac-Heisenberg-Wigner formalism we study electron-positron pair production for linear, elliptic, nearly circular and circular polarizations of electric fields with symmetrical frequency chirp, and we obtain Momentum spectra and pair yield. The difference of results among polarized fields is obvious for the small chirp. When the chirp parameter increases, the momentum spectra tend to exhibit the multiphoton pair generation that is characterized by the multi-concentric ring structure. The increase of number density is also remarkable compared to the case of asymmetrical frequency chirp. Note that the dynamically assisted Schwinger Mechanism plays an important role for the enhanced pair production in the symmetrical frequency chirp.

hep-ph↗

arXiv2021

Exploring Instance-Level Uncertainty for Medical Detection

The ability of deep learning to predict with uncertainty is recognized as key for its adoption in clinical routines. Moreover, performance gain has been enabled by modelling uncertainty according to empirical evidence. While previous work has widely discussed the uncertainty estimation in segmentation and classification tasks, its application on bounding-box-based detection has been limited, mainly due to the challenge of bounding box aligning. In this work, we explore to augment a 2.5D detection CNN with two different bounding-box-level (or instance-level) uncertainty estimates, i.e., predictive variance and Monte Carlo (MC) sample variance. Experiments are conducted for lung nodule detection on LUNA16 dataset, a task where significant semantic ambiguities can exist between nodules and non-nodules. Results show that our method improves the evaluating score from 84.57% to 88.86% by utilizing a combination of both types of variances. Moreover, we show the generated uncertainty enables superior operating points compared to using the probability threshold only, and can further boost the performance to 89.52%. Example nodule detections are visualized to further illustrate the advantages of our method.

cs.CV↗

arXiv2021

GaitSet: Cross-view Gait Recognition through Utilizing Gait as a Deep Set

Gait is a unique biometric feature that can be recognized at a distance; thus, it has broad applications in crime prevention, forensic identification, and social security. To portray a gait, existing gait recognition methods utilize either a gait template which makes it difficult to preserve temporal information, or a gait sequence that maintains unnecessary sequential constraints and thus loses the flexibility of gait recognition. In this paper, we present a novel perspective that utilizes gait as a deep set, which means that a set of gait frames are integrated by a global-local fused deep network inspired by the way our left- and right-hemisphere processes information to learn information that can be used in identification. Based on this deep set perspective, our method is immune to frame permutations, and can naturally integrate frames from different videos that have been acquired under different scenarios, such as diverse viewing angles, different clothes, or different item-carrying conditions. Experiments show that under normal walking conditions, our single-model method achieves an average rank-1 accuracy of 96.1% on the CASIA-B gait dataset and an accuracy of 87.9% on the OU-MVLP gait dataset. Under various complex scenarios, our model also exhibits a high level of robustness. It achieves accuracies of 90.8% and 70.3% on CASIA-B under bag-carrying and coat-wearing walking conditions respectively, significantly outperforming the best existing methods. Moreover, the proposed method maintains a satisfactory accuracy even when only small numbers of frames are available in the test samples; for example, it achieves 85.0% on CASIA-B even when using only 7 frames. The source code has been released at https://github.com/AbnerHqC/GaitSet.

cs.CV↗

arXiv2021

Atlas-aware ConvNetfor Accurate yet Robust Anatomical Segmentation

Convolutional networks (ConvNets) have achieved promising accuracy for various anatomical segmentation tasks. Despite the success, these methods can be sensitive to data appearance variations. Considering the large variability of scans caused by artifacts, pathologies, and scanning setups, robust ConvNets are vital for clinical applications, while have not been fully explored. In this paper, we propose to mitigate the challenge by enabling ConvNets' awareness of the underlying anatomical invariances among imaging scans. Specifically, we introduce a fully convolutional Constraint Adoption Module (CAM) that incorporates probabilistic atlas priors as explicit constraints for predictions over a locally connected Conditional Random Field (CFR), which effectively reinforces the anatomical consistency of the labeling outputs. We design the CAM to be flexible for boosting various ConvNet, and compact for co-optimizing with ConvNets for fusion parameters that leads to the optimal performance. We show the advantage of such atlas priors fusion is two-fold with two brain parcellation tasks. First, our models achieve state-of-the-art accuracy among ConvNet-based methods on both datasets, by significantly reducing structural abnormalities of predictions. Second, we can largely boost the robustness of existing ConvNets, proved by: (i) testing on scans with synthetic pathologies, and (ii) training and evaluation on scans of different scanning setups across datasets. Our method is proposing to be easily adopted to existing ConvNets by fine-tuning with CAM plugged in for accuracy and robustness boosts.

cs.CV↗

arXiv2021

Towards the standardization of quantum state verification using optimal strategies

Quantum devices for generating entangled states have been extensively studied and widely used. As so, it becomes necessary to verify that these devices truly work reliably and efficiently as they are specified. Here, we experimentally realize the recently proposed two-qubit entangled state verification strategies using both local measurements (nonadaptive) and active feed-forward operations (adaptive) with a photonic platform. About 3283/536 number of copies ($N$) are required to achieve a 99% confidence to verify the target quantum state for nonadaptive/adaptive strategies. These optimal strategies provide the Heisenberg scaling of the infidelity $ε$ as a function of $N$ ($ε$ $\sim$ $N^r$) with the parameter $r=-1$, exceeding the standard quantum limit with $r=-0.5$. We experimentally obtain the scaling parameter of $r=-0.88\pm$0.03 and $-0.78\pm$0.07 for nonadaptive and adaptive strategies, respectively. Our experimental work could serve as a standardized procedure for the verification of quantum states.

quant-ph↗

arXiv2021

T-Net: Learning Feature Representation with Task-specific Supervision for Biomedical Image Analysis

The encoder-decoder network is widely used to learn deep feature representations from pixel-wise annotations in biomedical image analysis. Under this structure, the performance profoundly relies on the effectiveness of feature extraction achieved by the encoding network. However, few models have considered adapting the attention of the feature extractor even in different kinds of tasks. In this paper, we propose a novel training strategy by adapting the attention of the feature extractor according to different tasks for effective representation learning. Specifically, the framework, named T-Net, consists of an encoding network supervised by task-specific attention maps and a posterior network that takes in the learned features to predict the corresponding results. The attention map is obtained by the transformation from pixel-wise annotations according to the specific task, which is used as the supervision to regularize the feature extractor to focus on different locations of the recognition object. To show the effectiveness of our method, we evaluate T-Net on two different tasks, i.e. , segmentation and localization. Extensive results on three public datasets (BraTS-17, MoNuSeg and IDRiD) have indicated the effectiveness and efficiency of our proposed supervision method, especially over the conventional encoding-decoding network.

eess.IV↗

arXiv2021

Oral-3D: Reconstructing the 3D Bone Structure of Oral Cavity from 2D Panoramic X-ray

Panoramic X-ray (PX) provides a 2D picture of the patient's mouth in a panoramic view to help dentists observe the invisible disease inside the gum. However, it provides limited 2D information compared with cone-beam computed tomography (CBCT), another dental imaging method that generates a 3D picture of the oral cavity but with more radiation dose and a higher price. Consequently, it is of great interest to reconstruct the 3D structure from a 2D X-ray image, which can greatly explore the application of X-ray imaging in dental surgeries. In this paper, we propose a framework, named Oral-3D, to reconstruct the 3D oral cavity from a single PX image and prior information of the dental arch. Specifically, we first train a generative model to learn the cross-dimension transformation from 2D to 3D. Then we restore the shape of the oral cavity with a deformation module with the dental arch curve, which can be obtained simply by taking a photo of the patient's mouth. To be noted, Oral-3D can restore both the density of bony tissues and the curved mandible surface. Experimental results show that Oral-3D can efficiently and effectively reconstruct the 3D oral structure and show critical information in clinical applications, e.g., tooth pulling and dental implants. To the best of our knowledge, we are the first to explore this domain transformation problem between these two imaging methods.

eess.IV↗

arXiv2020

OralViewer: 3D Demonstration of Dental Surgeries for Patient Education with Oral Cavity Reconstruction from a 2D Panoramic X-ray

Patient's understanding on forthcoming dental surgeries is required by patient-centered care and helps reduce fear and anxiety. Due to the gap of expertise between patients and dentists, conventional techniques of patient education are usually not effective for explaining surgical steps. In this paper, we present \textit{OralViewer} -- the first interactive application that enables dentist's demonstration of dental surgeries in 3D to promote patients' understanding. \textit{OralViewer} takes a single 2D panoramic dental X-ray to reconstruct patient-specific 3D teeth structures, which are then assembled with registered gum and jaw bone models for complete oral cavity modeling. During the demonstration, \textit{OralViewer} enables dentists to show surgery steps with virtual dental instruments that can animate effects on a 3D model in real-time. A technical evaluation shows our deep learning based model achieves a mean Intersection over Union (IoU) of 0.771 for 3D teeth reconstruction. A patient study with 12 participants shows \textit{OralViewer} can improve patients' understanding of surgeries. An expert study with 3 board-certified dentists further verifies the clinical validity of our system.

cs.HC↗

arXiv2020

Detecting and quantifying entanglement on near-term quantum devices

Quantum entanglement is a key resource in quantum technology, and its quantification is a vital task in the current Noisy Intermediate-Scale Quantum (NISQ) era. This paper combines hybrid quantum-classical computation and quasi-probability decomposition to propose two variational quantum algorithms, called Variational Entanglement Detection (VED) and Variational Logarithmic Negativity Estimation (VLNE), for detecting and quantifying entanglement on near-term quantum devices, respectively. VED makes use of the positive map criterion and works as follows. Firstly, it decomposes a positive map into a combination of quantum operations implementable on near-term quantum devices. It then variationally estimates the minimal eigenvalue of the final state, obtained by executing these implementable operations on the target state and averaging the output states. Deterministic and probabilistic methods are proposed to compute the average. At last, it asserts that the target state is entangled if the optimized minimal eigenvalue is negative. VLNE builds upon a linear decomposition of the transpose map into Pauli terms and the recently proposed trace distance estimation algorithm. It variationally estimates the well-known logarithmic negativity entanglement measure and could be applied to quantify entanglement on near-term quantum devices. Experimental and numerical results on the Bell state, isotropic states, and Breuer states show the validity of the proposed entanglement detection and quantification methods.

quant-ph↗

arXiv2020

Higgsino Asymmetry and Direct-Detection Constraints of Light Dark Matter in the NMSSM with Non-Universal Higgs Masses

In this work, we study the direct-detection constraints of light dark matter in the next-to minimal supersymmetric standard model (NMSSM) with non-universal Higgs masses (NUHM), especially the correlation between higgsino asymmetry and spin-dependent cross section. Finally, we get the following conclusions: (i) The spin-dependent cross section is proportional to the square of higgsino asymmetry in dark matter $\tildeχ^0_1$ in the NMSSM-NUHM. (ii) For highly singlino-dominated dark matter $\tildeχ^0_1$, the relic density can be sufficient, but the higgsino asymmetry and spin-dependent cross section is always small. (iii) With a sizeable higgsino component in the light dark matter, the higgsino asymmetry and spin-dependent cross section can be sizeable, but dark matter relic density is always small, thus it can escape the direct detections. (iv) Light dark matter in the $h_2$- and $Z$-funnel annihilation channels with sufficient relic density can be covered by future LUX-ZEPLIN (LZ) 7-ton in spin-dependent detections.

hep-ph↗

arXiv2020

Finite Block Length Analysis on Quantum Coherence Distillation and Incoherent Randomness Extraction

We give the first systematic study on the second order asymptotics of the operational task of coherence distillation with and without assistance. In the unassisted setting, we introduce a variant of randomness extraction framework where free incoherent operations are allowed before the incoherent measurement and the randomness extractors. We then show that the maximum number of random bits extractable from a given quantum state is precisely equal to the maximum number of coherent bits that can be distilled from the same state. This relation enables us to derive tight second order expansions of both tasks in the independent and identically distributed setting. Remarkably, the incoherent operation classes that can empower coherence distillation for generic states all admit the same second order expansions, indicating their operational equivalence for coherence distillation in both asymptotic and large block length regime. We then generalize the above line of research to the assisted setting, arising naturally in bipartite quantum systems where Bob distills coherence from the state at hand, aided by the benevolent Alice possessing the other system. More precisely, we introduce a new assisted incoherent randomness extraction task and establish an exact relation between this task and the assisted coherence distillation. This strengthens the one-shot relation in the unassisted setting and confirms that this cryptographic framework indeed offers a new perspective to the study of quantum coherence distillation. Likewise, this relation yields second order characterizations to the assisted tasks. As by-products, we show the strong converse property of the aforementioned tasks from their second order expansions.

quant-ph↗

arXiv2020

Spring-Rod System Identification via Differentiable Physics Engine

We propose a novel differentiable physics engine for system identification of complex spring-rod assemblies. Unlike black-box data-driven methods for learning the evolution of a dynamical system \emph{and} its parameters, we modularize the design of our engine using a discrete form of the governing equations of motion, similar to a traditional physics engine. We further reduce the dimension from 3D to 1D for each module, which allows efficient learning of system parameters using linear regression. The regression parameters correspond to physical quantities, such as spring stiffness or the mass of the rod, making the pipeline explainable. The approach significantly reduces the amount of training data required, and also avoids iterative identification of data sampling and model training. We compare the performance of the proposed engine with previous solutions, and demonstrate its efficacy on tensegrity systems, such as NASA's icosahedron.

cs.RO↗

arXiv2020

Boosting tunable blue luminescence of halide perovskite nanoplatelets through post-synthetic surface trap repair

The easily tunable emission of halide perovskite nanocrystals throughout the visible spectrum makes them an extremely promising material for light-emitting applications. Whereas high quantum yields and long-term colloidal stability have already been achieved for nanocrystals emitting in the red and green spectral range, the blue region currently lags behind, with low quantum yields, broad emission profiles and insufficient colloidal stability. In this work, we present a facile synthetic approach for obtaining two-dimensional CsPbBr3 nanoplatelets with monolayer-precise control over their thickness, resulting in sharp photoluminescence and electroluminescence peaks with a tunable emission wavelength between 432 and 497 nm due to quantum confinement. Subsequent addition of a PbBr2-ligand solution repairs surface defects likely stemming from bromide and lead vacancies in a sub-ensemble of weakly emissive nanoplatelets. The overall photoluminescence quantum yield of the blue-emissive colloidal dispersions is consequently enhanced up to a value of 73+-2 %. Transient optical spectroscopy measurements focusing on the excitonic resonances further confirm the proposed repair process. Additionally, the high stability of these nanoplatelets in films and to prolonged UV light exposure is shown.

cond-mat.mes-hall↗

arXiv2020

What Have We Achieved on Text Summarization?

Deep learning has led to significant improvement in text summarization with various methods investigated and improved ROUGE scores reported over the years. However, gaps still exist between summaries produced by automatic summarizers and human professionals. Aiming to gain more understanding of summarization systems with respect to their strengths and limits on a fine-grained syntactic and semantic level, we consult the Multidimensional Quality Metric(MQM) and quantify 8 major sources of errors on 10 representative summarization models manually. Primarily, we find that 1) under similar settings, extractive summarizers are in general better than their abstractive counterparts thanks to strength in faithfulness and factual-consistency; 2) milestone techniques such as copy, coverage and hybrid extractive/abstractive methods do bring specific improvements but also demonstrate limitations; 3) pre-training techniques, and in particular sequence-to-sequence pre-training, are highly effective for improving text summarization, with BART giving the best results.

cs.CL↗

arXiv2020

Stochastic stem cell models with mutation: A comparison of asymmetric and symmetric divisions

In order to fulfill cell proliferation and differentiation through cellular hierarchy, stem cells can undergo either asymmetric or symmetric divisions. Recent studies pay special attention to the effect of different modes of stem cell division on the lifetime risk of cancer, and report that symmetric division is more beneficial to delay the onset of cancer. The fate uncertainty of symmetric division is considered to be the reason for the cancer-delaying effect. In this paper we compare asymmetric and symmetric divisions of stem cells via studying stochastic stem cell models with mutations. Specially, by using rigorous mathematical analysis we find that both asymmetric and symmetric models show the same statistical average, but symmetric model shows higher fluctuation than asymmetric model. We further show that the difference between the two models would be more remarkable for lower mutation rates. Our work quantifies the uncertainty of cell division and highlights the significance of stochasticity for distinguishing between different modes of stem cell division.

q-bio.PE↗

arXiv2020

Single-Sideband Time-Modulated Phased Array With 2-bit Phased Shifters

A novel single-sideband (SSB) time-modulated technique with 2-bit phase shifters is proposed. The timemodulated module is implemented by adding periodic phase modulation to 2-bit phase shifters, which is simpler without performance loss compared to existing SSB time-modulated method. During one modulation period, four phase states (0, π/2, π, 3π/2) of 2-bit phase shifters are switched in sequence. After the modulation, the SSB time modulation is realized and the main power is distributed to the first harmonic component. The feasibility of the proposed method is verified by experiments. The undesired harmonics are efficiently suppressed. Meanwhile, 80° beam scanning range are realized through the proposed module.

eess.SP↗